Jump to content


Active Members
  • Posts

  • Joined

  • Last visited

Everything posted by AlexSka

  1. Hello. In the links that you have gave are ROM images of openwrt-ar71xx-nand-vmlinux-initramfs.elf : ​http://openwrt.ayufan.eu/rb951g/attitude_adjustment-r35508/ ​ http://openwrt.ayufan.eu/rb951g/trunk-r35489/ ​ ​As your success in flashing the RB951Ui-2Hnd with OpenWRT ? Because after flashing with openwrt-r35489-13.0alpha1-mipsbe.npk my router begins reboot in loop and with openwrt-ar71xx-nand-vmlinux-initramfs.elf would not running.
  2. You can always use it : root@bt:~# mkfifo /tmp/pineapple-rx root@bt:~# ssh pineapple_ip “tcpdump –s 0 –U –n –w - -i br-sniff” > /tmp/pineapple-rx [/CODE] [CODE] root@bt:~# wireshark –k –i /tmp/pineapple-rx [/CODE] for remote capturing where br-sniff = bridged(eth0 + eth1) br-lan = wlan0 for ssh connection
  3. Im interested in capturing traffic by this scheme without arp-spoofing attack : Normal Internet sharing by ISP Fake Internet sharing with Pineapple injecting into network or Im interested to inject Wifi Pineapple Mark IV between Local ISP & WiFi Gateway to forward all traffic I know I can create bridge & capture all traffic by this scheme : root@Pineapple:~# vi /etc/config/network config 'interface' 'lan' option 'ifname' 'eth0 eth1' option 'type' 'bridge' option 'proto' 'none' option 'auto' '1' [/CODE] root@Pineapple:~# [b]/etc/init.d/network restart[/b] root@Pineapple:~# [b]tcpdump -i br-lan -w /usb/capture.cap[/b] But i want to transit this traffic over sslstrip transparently Can anyone help to solve this ?
  4. Its must be transparent without using dhcp & routing. Because i cant route from to
  5. you're a very smart man. I am wondering how to wrap traffic to sslstrip in created bridge .
  6. Is possible to run sslstrip on bridge interface or only over NAT ? like on pic. I want to decode https data on the fly in network between WiFi Router & ISP without accessing in local network & changing ip addresses
  7. You can do it : * create bridge [eth0 + eth1] * switch lan interface to wlan0 * install tcpdump * capture all traffic with saving on flash drive or remotely with wireshark nano /etc/condfig/network[/CODE] change line : [CODE] config interface lan option ifname eth0 [/CODE] to [CODE] config interface lan option ifname wlan0 [/CODE] for connection via WiFi delete another configs & add [CODE] config 'interface' 'sniff' option 'type' 'bridge' option 'proto' 'none' option 'ifname' 'eth0 eth1' option 'auto' '1' [/CODE] restart network services [CODE] /etc/init.d/network restart [/CODE] now you can run : [CODE] tcpdump -vv -i br-sniff -w /usb/capture.cap [/CODE] you can read this: http://wiki.openwrt.org/doc/uci/network
  8. i wrote it ... ---- Problem solved : need to change in /etc/config/network[/CODE] [CODE] config interface lan option ifname eth0 [/CODE] to [CODE] config interface lan option ifname wlan0 [/CODE]
  9. Hello! Can anyone help me to solve problem with multiple interfaces sniffing on wifi pineapple m4 ? I want cut in into ethernet cable to sniff RX/TX data over eth0 & eth1 interfaces & write it to dump on flashdrive but when i run : tcpdump -vv -i eth0 -i eth1 -w /usb/dump.cap [/CODE] I've only capture eth0 or eth1 interface when i conected via wireless interface & run : [CODE] brctl addbr sniff brctl delif sniff eth0 brctl addif sniff eth0 brctl addif sniff eth1 tcpdump -vv -i sniff -w /usb/dump.cap [/CODE] I've capture data from bottom interfaces but cannot connect to ssh or webgui via br-lan (wireess interfaces) sorry for my english
  • Create New...