Jump to content

Develectron

Active Members
  • Posts

    18
  • Joined

  • Last visited

Posts posted by Develectron

  1. i already tried multiple power adapters..Also a external power bank i used many times before..I only get a bright green led and a minor glow in the red led..Now i left it 2days laying around without power,came home plugged in the original power adapter that came with the pineapple..And it booted again..But this happens every time..If i plug out the power now and plug it right back in it wont boot..And if i leave it a couple off days without power and then plug it in it boots again :s

    I think there is something broken in the pineapple..Anyone a idea what component it could be?..And if i can fix it...I have good soldering skills..

    Thanks in advance

  2. I recently moved from my parent's home to my own place. I came here and plugged in my wifi Pineapple Mark V here and i only got a green led and a minor glow on the red led..So i tried resetting it using the dip switches,but had no success..So i removed the micro sd card and put in in my reader and reformatted it and placed it back in the pineapple..After that when i plugged it in still nothing..So i tried formatting another sd card and plugged it in my pineapple, and still had the dip switches placed on the unbricking process so up, up, up, up, down..Then when i plugged it in it had booted and i could flash the factory.bin file again..I also did not make the mistake of unplugging it when the blue led was still blinking..I waited for the multi-blinking led pattern..then i unplugged it and put the dip switched all back up..Then when i plugged in my power again it again did not boot :(..So i left it laying around..Then the next day i came home and tried plugging it in i booted up normally and everything was working fine..So i thought yeah where back..So i unplugged it and moved it to the place where i needed to be..And again when i plugged it in i had only a green led and a minor glow on the red led..So it was broken again:(...I again left it laying around a couple of hours and plugged it back in and it booted up normally??..So every time when i get it fixed and do a power cycle it is broken..I every time need to wait a couple of hours when i unplug it before plugging it back in, otherwise it wont boot..This is really frustrating me..But now today i tried moving it again and left it laying around again a couple of hours but now i cant get it to boot anymore, also the flashing and such i cant do since it's not getting the ethernet port up..So now i think it's really broken..i also again tried all the previous thing i mentioned like reformatting the sd card en placing the dip switch in different positions..But cant get it to do anything..I now also tried reading it out over the serial port but i get nothing out off it..
    Please Hak5 team help me..
    Cause i paid a lot for this device for sending it to my country, and i really love the device i am heart broken now since the device is not working properly.
    Please tell me there is a solution

    Thanks in advance

  3. First i want to say that i don't want to be competitive against the Hakshop

    and if you can u should buy a real USB Rubber Ducky from them, cause it's really made simple and the chip they use is much faster in executing or typing the payloads

    But did you ever wanted to make your own USB Rubber Ducky?

    Well now you can using a regular USB stick, i must start with mentioning that it can not be done with all the USB sticks you will need one with a specific Nand chipset on it.

    More specific the Phison 2251-03 (2303)

    So now you are probably wondering where do i get that specific usb stick then, well you may have one laying around!

    You can check it using GetFlashInfo

    You can download it from this LINK

    On github there is also a list with all know compatible devices, but most off them are not for sale anymore.

    So what do i do then ?

    Well come and visit my website and find the guide on how to make your own USB Rubber Ducky using a normal USB Stick or buy a clean USB stick with the Phison 2251-03 chip on it

    It's all explained with screenshots and text

    I tried to post the whole guide and screenshots here cause i want to help this community out, but it wont let me cause it uses to much pictures.

    So find the guide here

    http://www.pentestingshop.com/pentesting/make-your-own-usb-rubber-ducky-using-a-normal-usb-stick/

    Hope you all like this and please let me know what u think about it.

    Develectron

  4. First i want to mention that I'm a Huge fan for years!

    So what i want to ask actually is that i have made my own web shop and trying to sell some Pentesting equipment and guides around it on how to use it, and how to do some basic pentests
    but since it's somehow hacker related i can not so easy to do on advertising.

    Cause i heard from a friend that google somehow ranks that kinda traffic lower than other good websites.

    Like the Hak5 webshop is almost like all the time on the top here (From Belgium) if I search google for hakshop the Hak5 webshop is on the first place and even if i search hackshop so with "CK" the Hak5 webshop is on the 3th place.

    But i dont have allot off money to put in advertising cause google ad's cost really way to much for me to invest in.

    So since i dont have money to put in advertising and made a guide on how to make your own USB Rubber Ducky using a normal USB Stick (BADUSB) my question is if that i can make a post about it on the Hak5 forum under the USB Rubber Ducky section?

    I really don't want to be cooperative against the Hakshop so now also another question is if it's okey for the Hak5 team that i made this post on my webshop and used the USB Rubber Ducky Encoder and the name in my title?

    Again huge fan off the show for years now so not offended if u tell me i cannot, but i thought that i maybe should ask it first
    So that i don't get in trouble.

    Thanks in Advance

    Develectron

  5. i am also planning on buying this amplifier http://www.ebay.com/itm/37dbm-5W-WiFi-Wireless-LAN-Broadband-Router-Signal-Booster-Amplifier-37dBm-2-4G/121192180700?_trksid=p2047675.c100011.m1850&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D20140602152332%26meid%3D07a5731d772c425ea1d9b1160ecb49f5%26pid%3D100011%26prg%3D20140602152332%26rk%3D1%26rkt%3D10%26sd%3D181168164525

    but then connect it to the client radio for receiving better!

    now my question is the wifi pineapple mark v capable of handling so much watt on that wireless radio?

    i am also planning on buying a good antenna that is capable with the 5w amplifier?

    The thing is i have a client that is traveling a lot, and on some camping sites where he comes he at first got good wifi, but when sometimes french people arrive there he looses almost all of his wifi signal, he thinks it is because the have much better equipment and pulling down all the transmit power.

    i thought maybe then if he uses that 5w amplifier on the client (receiving) radio of the wifi pineapple and the other radio for himself to connect to it could be better ? Or am i thinking wrong ?

    Please let me know if this is a solution!

    Or what you think these french use.

    Thanks in advance

    Develectron

  6. i got this fixed now!

    i was working an a kali 1.09a and there was even no gnuradio or rtl packages in this distro :s don't know why

    but afterwards i tried it with a kali 1.0.6 and came up with the same problem of no module gsm

    then did apt-get install gnuradio gnuradio-dev cmake git libboost-all-dev libusb-1.0-0 libusb-1.0-0-dev libfftw3-dev swig python-numpy

    and did rerun ./bootstrap on gsm-receiver and now it's all working :)

    Love this :)

  7. Hi Rkiver

    Wow sorry i didn't know that you where just a reseller! And that u do this on your own!

    If u buy and resell at this price your indeed doing this at a good price, cause i believe u that importing a large quantity of device in Europe is not easy!

    And i also noticed that u already shipped my USB rubber Ducky i ordered earlier! That was pretty fast!

    So i want to apologize cause your doing a great job!

    I also already received a mail from DHL and so so your handling things insane fast.

    Thx and keep up the good work!

    Greetings

    Develectron

  8. Best Hak5,

    I just placed a order for a Usb rubber ducky through the new European Edutech Hakshop.
    Afterwards i went back on the original hakshop and added 1 usb rubber ducky to my cart and also filled in the calculation for shipping it to Belgium
    the usb rubber ducky in the normal hakshop is 36$ and then then 33$ for the US Postal Priority Shipping, what makes a total off 69$ or converted to Euro 55.5186

    And the order i placed in the European Edutech Hakshop was 54.35 €

    I know it's a bit cheaper,but i'm kinda disappointed now cause i just watched the latest episode i heard there was a HAK5FAN coupon. I could not fill in this coupon on the European Edutech hakshop :(

    And i really wanted some stickers also :p

    So very good that there is now a European hakshop, but next time i'm ordering again from the original hakshop :p

    Or please also apply the rules to the European hakshop!

    Cause i'm really disappointed that i don't have some awesome hak5 stickers now :p

  9. hi
    i also got this problem


    root@kali:/airprobe/gsm-receiver/src/python# ./go.sh capture_941.8M_112.cfile
    Traceback (most recent call last):
    File "./gsm_receive.py", line 12, in <module>
    import gsm
    File "../lib/gsm.py", line 26, in <module>
    _gsm = swig_import_helper()
    File "../lib/gsm.py", line 18, in swig_import_helper
    import _gsm
    ImportError: No module named _gsm

    anyone got a solution yet ?
    Or do i just need to start over
    And does it only work with older Kali or also with the new 1.0.9 ?

    Thanks in advance

  10. Best Sebkinne

    That's a quick reply :)

    i currently got this infusions running

    get

    1.3 144kb

    Removednsspoof

    1.5 100kb

    Removenmap

    1.4 72kb

    Removetcpdump

    1.3 80kb

    Removeettercap

    1.3 468kb

    Removewifimanager

    1.7 120kb

    Removeardronepwn

    1.0 3kb

    Removesslstrip

    1.6 104kb

    Removeadsbtracker

    1.4 8kb

    Removeoccupineapple

    1.6 116kb

    Removegps-logger

    v1.0 40kb

    Removeevilportal

    2.1 76kb

    Removestrip-n-inject

    1.2 212kb

    Removetorgateway

    1.1 52kb

    Removearping

    1.0 20kb

    Removejammer

    1.6 112kb

    Removephials

    1.0 24kb

    Removepineapplestats

    1.0 364kb

    Removeurlsnarf

    1.5 84kb

    Removesitesurvey

    1.5

    112kb

    Sorry that this is just copy pasted :p

    Remove

  11. I worked a lot now with my Wifi Pineapple Mark V but since a couple weeks now it keeps dropping a file called NCSI.txt in my /www folder

    Also today when i was doing some more tests i also came up with this: when i launched a Sslstrip and put the Auto-refresh on 1 sec i noticed also a text flash by with some csi stuff in it :)

    i opened up WinScp and browsed to my Sslstrip logs and this was in it:

    2014-06-18 14:35:58,401 Resolving host: www.msftncsi.com
    2014-06-18 14:35:58,404 Host not cached.
    2014-06-18 14:35:59,308 Resolved host successfully: www.msftncsi.com -> 77.67.28.136
    2014-06-18 14:35:59,311 Sending request via HTTP...
    2014-06-18 14:35:59,631 HTTP connection made.
    2014-06-18 14:35:59,634 Sending Request: GET /ncsi.txt
    2014-06-18 14:35:59,640 Sending header: connection : Close
    2014-06-18 14:35:59,643 Sending header: host : www.msftncsi.com
    2014-06-18 14:35:59,646 Sending header: user-agent : Microsoft NCSI
    2014-06-18 14:36:00,148 Got server response: HTTP/1.0 200 OK
    2014-06-18 14:36:00,152 Got server header: Content-Length:14
    2014-06-18 14:36:00,155 Got server header: Date:Wed, 18 Jun 2014 14:35:59 GMT
    2014-06-18 14:36:00,158 Got server header: Connection:close
    2014-06-18 14:36:00,161 Got server header: Content-Type:text/plain
    2014-06-18 14:36:00,164 Got server header: Cache-Control:max-age=30, must-revalidate
    2014-06-18 14:36:00,168 Read from server:
    Microsoft NCSI
    Now could someone tell me what this is ? :)
    and why it keeps popping up on my pineapple ?
    Thx in advance
×
×
  • Create New...