moonoi

Hi there, thanks for the reply. Sorry for my slow response, only had chance again today. So since power off and on, now getting this; but no public ip/ internet access? 00:09:13 Pineapple daemon.notice pppd[2219]: CHAP authentication succeeded 00:09:13 Pineapple daemon.info pppd[2219]: CHAP authentication succeeded 00:09:12 Pineapple user.notice root: 3G: firewall stopped 00:09:12 Pineapple local2.info chat[2223]: timeout set to 30 seconds 00:09:12 Pineapple local2.info chat[2223]: send (ATD*99***1#^M) 00:09:12 Pineapple local2.info chat[2223]: send ( ^M) 00:09:12 Pineapple local2.info chat[2223]: expect (OK) 00:09:12 Pineapple local2.info chat[2223]: expect (CONNECT) 00:09:12 Pineapple local2.info chat[2223]: ^M 00:09:12 Pineapple local2.info chat[2223]: ^M 00:09:12 Pineapple local2.info chat[2223]: OK 00:09:12 Pineapple local2.info chat[2223]: CONNECT 00:09:12 Pineapple local2.info chat[2223]: ATD*99***1#^M^M 00:09:12 Pineapple local2.info chat[2223]: AT+CGDCONT=1,"IP","payandgo.o2.co.uk"^M^M 00:09:12 Pineapple local2.info chat[2223]: -- got it 00:09:12 Pineapple local2.info chat[2223]: -- got it 00:09:12 Pineapple daemon.notice pppd[2219]: Connect: 3g-wan2 <--> /dev/ttyUSB0 00:09:12 Pineapple daemon.info pppd[2219]: Using interface 3g-wan2 00:09:12 Pineapple daemon.info pppd[2219]: Serial connection established. 00:09:11 Pineapple local2.info chat[2223]: timeout set to 10 seconds 00:09:11 Pineapple local2.info chat[2223]: send (ATE1^M) 00:09:11 Pineapple local2.info chat[2223]: send (AT+CGDCONT=1,"IP","payandgo.o2.co.uk"^M) 00:09:11 Pineapple local2.info chat[2223]: send (AT&F^M) 00:09:11 Pineapple local2.info chat[2223]: report (CONNECT) 00:09:11 Pineapple local2.info chat[2223]: expect (OK) 00:09:11 Pineapple local2.info chat[2223]: expect (OK) 00:09:11 Pineapple local2.info chat[2223]: abort on (NO CARRIER) 00:09:11 Pineapple local2.info chat[2223]: abort on (ERROR) 00:09:11 Pineapple local2.info chat[2223]: abort on (BUSY) 00:09:11 Pineapple local2.info chat[2223]: ^M 00:09:11 Pineapple local2.info chat[2223]: OK 00:09:11 Pineapple local2.info chat[2223]: OK 00:09:11 Pineapple local2.info chat[2223]: ATE1^M^M 00:09:11 Pineapple local2.info chat[2223]: AT&F^M^M 00:09:11 Pineapple local2.info chat[2223]: -- got it 00:09:11 Pineapple local2.info chat[2223]: -- got it 00:09:10 Pineapple daemon.notice pppd[2219]: pppd 2.4.5 started by root, uid 0 00:09:10 Pineapple daemon.notice netifd: wan2 (2181): Trying to set mode 00:09:10 Pineapple daemon.info dnsmasq-dhcp[1466]: DHCPREQUEST(br-lan) 172.16.42.207 64:d9:89:c5:4e:31 00:09:10 Pineapple daemon.info dnsmasq-dhcp[1466]: DHCPOFFER(br-lan) 172.16.42.207 64:d9:89:c5:4e:31 00:09:10 Pineapple daemon.info dnsmasq-dhcp[1466]: DHCPDISCOVER(br-lan) 64:d9:89:c5:4e:31 00:09:10 Pineapple daemon.info dnsmasq-dhcp[1466]: DHCPACK(br-lan) 172.16.42.207 64:d9:89:c5:4e:31 RLDP 00:09:07 Pineapple kern.info kernel: [ 547.140000] usbserial: USB Serial Driver core 00:09:07 Pineapple kern.info kernel: [ 547.140000] usbcore: registered new interface driver usbserial_generic 00:09:07 Pineapple kern.info kernel: [ 547.130000] usbserial_generic 1-1:1.4: generic converter detected 00:09:07 Pineapple kern.info kernel: [ 547.130000] usb 1-1: generic converter now attached to ttyUSB2 00:09:07 Pineapple kern.info kernel: [ 547.120000] usb 1-1: generic converter now attached to ttyUSB1 00:09:07 Pineapple kern.info kernel: [ 547.110000] usbserial_generic 1-1:1.3: generic converter detected 00:09:07 Pineapple kern.info kernel: [ 547.110000] usb 1-1: generic converter now attached to ttyUSB0 00:09:07 Pineapple kern.info kernel: [ 547.100000] usbserial_generic 1-1:1.0: generic converter detected 00:09:07 Pineapple kern.info kernel: [ 547.100000] USB Serial support registered for generic 00:09:07 Pineapple kern.info kernel: [ 547.090000] usbcore: registered new interface driver usbserial 00:09:07 Pineapple daemon.info hostapd: wlan0: STA 64:d9:89:c5:4e:31 IEEE 802.11: authenticated 00:09:07 Pineapple daemon.info hostapd: wlan0: STA 64:d9:89:c5:4e:31 IEEE 802.11: associated (aid 1) 00:09:04 Pineapple kern.info kernel: [ 544.050000] usbcore: deregistering interface driver usbserial 00:09:04 Pineapple kern.info kernel: [ 544.050000] USB Serial deregistering driver generic 00:09:04 Pineapple kern.info kernel: [ 544.040000] usbcore: deregistering interface driver usbserial_generic 00:08:51 Pineapple user.notice root: 3G: Connection Script here, searching for modems 00:08:28 Pineapple user.notice usb-modeswitch: 1-1:1.6: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=? 00:08:28 Pineapple user.notice usb-modeswitch: 1-1:1.5: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=? 00:08:28 Pineapple user.notice usb-modeswitch: 1-1:1.4: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=? 00:08:28 Pineapple user.notice usb-modeswitch: 1-1:1.3: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=? 00:08:28 Pineapple user.notice usb-modeswitch: 1-1:1.2: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=? 00:08:28 Pineapple user.notice usb-modeswitch: 1-1:1.1: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=? 00:08:28 Pineapple user.notice usb-modeswitch: 1-1:1.0: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=? 00:08:27 Pineapple user.notice usb-modeswitch: 1-1:1.1: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=? 00:07:59 Pineapple kern.notice kernel: [ 479.380000] sd 7:0:0:0: [sda] Attached SCSI removable disk 00:07:59 Pineapple kern.notice kernel: [ 479.370000] sd 7:0:0:0: Attached scsi generic sg1 type 0 00:07:59 Pineapple kern.notice kernel: [ 479.360000] scsi 7:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2 00:07:59 Pineapple kern.notice kernel: [ 479.350000] scsi 6:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 00:07:59 Pineapple kern.notice kernel: [ 479.350000] scsi 6:0:0:0: Attached scsi generic sg0 type 5 00:07:58 Pineapple kern.info kernel: [ 478.360000] scsi7 : usb-storage 1-1:1.6 00:07:58 Pineapple kern.info kernel: [ 478.350000] scsi6 : usb-storage 1-1:1.5 00:07:58 Pineapple kern.info kernel: [ 478.330000] cdc_ether 1-1:1.1: wwan0: register 'cdc_ether' at usb-ehci-platform-1, Mobile Broadband Network Device, 02:50:f3:00:00:00 00:07:58 Pineapple kern.info kernel: [ 478.180000] usb 1-1: new high-speed USB device number 3 using ehci-platform 00:07:54 Pineapple syslog.notice usb_modeswitch: switching device 12d1:1446 on 001/002 00:07:54 Pineapple kern.info kernel: [ 474.110000] usb 1-1: USB disconnect, device number 2 00:07:53 Pineapple user.notice usb-modeswitch: 1-1:1.0: Selecting /etc/usb_modeswitch.d/12d1:1446 for mode switching 00:07:53 Pineapple user.notice usb-modeswitch: 1-1:1.0: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=? 00:07:53 Pineapple kern.info kernel: [ 473.590000] scsi1 : usb-storage 1-1:1.1 00:07:53 Pineapple kern.info kernel: [ 473.570000] scsi0 : usb-storage 1-1:1.0 00:07:53 Pineapple kern.info kernel: [ 473.420000] usb 1-1: new high-speed USB device number 2 using ehci-platform 00:05:02 Pineapple user.notice root: CLEANUP: memory looking good 00:05:02 Pineapple user.notice root: CLEANUP: Karma log looking good 00:05:02 Pineapple user.notice root: 3G: Interface 3g-wan2 seems down. Attempting 3g connect script again 00:05:02 Pineapple user.notice root: 3G: Connection Script here, searching for modems 00:05:01 Pineapple user.notice root: CLEANUP: Clean-up Script Executed 00:05:01 Pineapple user.notice root: 3G: Keep-Alive Script Executed 00:05:01 Pineapple cron.info crond[1386]: crond: USER root pid 1673 cmd /pineapple/3g/3g-keepalive.sh 00:05:01 Pineapple cron.info crond[1386]: crond: USER root pid 1672 cmd /pineapple/scripts/cleanup.sh 00:01:16 Pineapple user.info sysinit: sh: write error: Invalid argument 00:01:16 Pineapple user.info sysinit: setting up led WLAN 00:01:16 Pineapple user.info sysinit: setting up led WAN 00:01:16 Pineapple user.info sysinit: setting up led USB Here is the output from dmesg root@Pineapple:~# dmesg [ 0.000000] Linux version 3.3.8 (www-data@buildbot) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #96 Sun Oct 14 10:17:26 EDT 2012 [ 0.000000] MyLoader: sysp=f0f0f0f0, boardp=f0f0f1f0, parts=f0f0f0f0 [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU revision is: 00019374 (MIPS 24Kc) [ 0.000000] SoC: Atheros AR9330 rev 1 [ 0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 02000000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Zone PFN ranges: [ 0.000000] Normal 0x00000000 -> 0x00002000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] Early memory PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00002000 [ 0.000000] On node 0 totalpages: 8192 [ 0.000000] free_area_init_node: node 0, pgdat 802cb680, node_mem_map 81000000 [ 0.000000] Normal zone: 64 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 8128 pages, LIFO batch:0 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128 [ 0.000000] Kernel command line: board=HORNET-UB console=ttyATH0,115200 mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6144k(rootfs),1600k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware) rootfstype=squashfs,jffs2 noinitrd [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes) [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Memory: 29276k/32768k available (2082k kernel code, 3492k reserved, 396k data, 204k init, 0k highmem) [ 0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:51 [ 0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104) [ 0.080000] pid_max: default: 32768 minimum: 301 [ 0.080000] Mount-cache hash table entries: 512 [ 0.090000] NET: Registered protocol family 16 [ 0.090000] gpiochip_add: registered GPIOs 0 to 29 on device: ath79 [ 0.100000] MIPS: machine is ALFA NETWORKS Hornet-UB [ 0.540000] bio: create slab <bio-0> at 0 [ 0.550000] Switching to clocksource MIPS [ 0.550000] NET: Registered protocol family 2 [ 0.560000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.560000] TCP established hash table entries: 1024 (order: 1, 8192 bytes) [ 0.560000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.570000] TCP: Hash tables configured (established 1024 bind 1024) [ 0.580000] TCP reno registered [ 0.580000] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.590000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.590000] NET: Registered protocol family 1 [ 0.600000] PCI: CLS 0 bytes, default 32 [ 0.620000] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.620000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) © 2001-2006 Red Hat, Inc. [ 0.630000] msgmni has been set to 57 [ 0.630000] io scheduler noop registered [ 0.640000] io scheduler deadline registered (default) [ 0.640000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled [ 0.650000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11) is a AR933X UART [ 0.650000] console [ttyATH0] enabled, bootconsole disabled [ 0.670000] m25p80 spi0.0: found mx25l6405d, expected m25p80 [ 0.670000] m25p80 spi0.0: mx25l6405d (8192 Kbytes) [ 0.680000] 7 cmdlinepart partitions found on MTD device spi0.0 [ 0.680000] Creating 7 MTD partitions on "spi0.0": [ 0.690000] 0x000000000000-0x000000040000 : "u-boot" [ 0.690000] 0x000000040000-0x000000050000 : "u-boot-env" [ 0.700000] 0x000000050000-0x000000650000 : "rootfs" [ 0.710000] mtd: partition "rootfs" set to be root filesystem [ 0.710000] mtd: partition "rootfs_data" created automatically, ofs=560000, len=F0000 [ 0.720000] 0x000000560000-0x000000650000 : "rootfs_data" [ 0.720000] 0x000000650000-0x0000007e0000 : "kernel" [ 0.730000] 0x0000007e0000-0x0000007f0000 : "nvram" [ 0.730000] 0x0000007f0000-0x000000800000 : "art" [ 0.740000] 0x000000050000-0x0000007e0000 : "firmware" [ 0.760000] ag71xx_mdio: probed [ 0.770000] eth0: Atheros AG71xx at 0xba000000, irq 5 [ 1.320000] eth0: Found an AR7240/AR9330 built-in switch [ 2.350000] eth1: Atheros AG71xx at 0xb9000000, irq 4 [ 2.900000] ag71xx ag71xx.0: eth1: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY] [ 2.910000] TCP cubic registered [ 2.910000] NET: Registered protocol family 17 [ 2.920000] 8021q: 802.1Q VLAN Support v1.8 [ 2.930000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2. [ 2.930000] Freeing unused kernel memory: 204k freed [ 6.300000] Registered led device: alfa:blue:lan [ 6.300000] Registered led device: alfa:blue:usb [ 6.300000] Registered led device: alfa:blue:wan [ 6.300000] Registered led device: alfa:blue:wlan [ 6.300000] Registered led device: alfa:blue:wps [ 9.600000] JFFS2 notice: (451) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 13 of xref (0 dead, 5 orphan) found. [ 10.320000] SCSI subsystem initialized [ 10.630000] usbcore: registered new interface driver usbfs [ 10.640000] usbcore: registered new interface driver hub [ 10.640000] usbcore: registered new device driver usb [ 11.220000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 11.220000] ehci-platform ehci-platform: Generic Platform EHCI Controller [ 11.230000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1 [ 11.270000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000 [ 11.290000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00 [ 11.290000] hub 1-0:1.0: USB hub found [ 11.290000] hub 1-0:1.0: 1 port detected [ 11.420000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 11.540000] uhci_hcd: USB Universal Host Controller Interface driver [ 11.660000] Initializing USB Mass Storage driver... [ 11.660000] usbcore: registered new interface driver usb-storage [ 11.670000] USB Mass Storage support registered. [ 33.070000] Compat-wireless backport release: compat-wireless-2012-07-13 [ 33.070000] Backport based on wireless-testing.git master-2012-07-16 [ 33.080000] compat.git: wireless-testing.git [ 33.110000] cfg80211: Calling CRDA to update world regulatory domain [ 33.120000] cfg80211: World regulatory domain updated: [ 33.120000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 33.130000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 33.140000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 33.140000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 33.150000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 33.160000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 34.160000] cfg80211: World regulatory domain updated: [ 34.170000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 34.180000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 34.180000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 34.190000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 34.200000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 34.210000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 34.550000] usbcore: registered new interface driver rt73usb [ 34.700000] usbcore: registered new interface driver rtl8187 [ 34.730000] ath: EEPROM regdomain: 0x833a [ 34.730000] ath: EEPROM indicates we should expect a country code [ 34.730000] ath: doing EEPROM country->regdmn map search [ 34.730000] ath: country maps to regdmn code: 0x37 [ 34.730000] ath: Country alpha2 being used: GB [ 34.730000] ath: Regpair used: 0x37 [ 34.730000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 34.740000] Registered led device: ath9k-phy0 [ 34.740000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2 [ 34.760000] usbcore: registered new interface driver rt2800usb [ 34.840000] cfg80211: Calling CRDA for country: GB [ 34.840000] cfg80211: Regulatory domain changed to country: GB [ 34.850000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 34.850000] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 34.860000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 34.870000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 34.870000] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [ 34.890000] Button Hotplug driver version 0.4.1 [ 35.130000] RPC: Registered named UNIX socket transport module. [ 35.130000] RPC: Registered udp transport module. [ 35.140000] RPC: Registered tcp transport module. [ 35.140000] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 35.490000] PPP generic driver version 2.4.2 [ 35.630000] tun: Universal TUN/TAP device driver, 1.6 [ 35.640000] tun: © 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 35.900000] ip_tables: © 2000-2006 Netfilter Core Team [ 36.120000] NET: Registered protocol family 24 [ 36.250000] nf_conntrack version 0.5.0 (460 buckets, 1840 max) [ 37.060000] usbcore: registered new interface driver ath9k_htc [ 37.320000] usbcore: registered new interface driver usbserial [ 37.320000] USB Serial support registered for generic [ 37.330000] usbcore: registered new interface driver usbserial_generic [ 37.330000] usbserial: USB Serial Driver core [ 37.370000] usbcore: registered new interface driver cdc_ether [ 37.480000] Error: Driver 'gpio-keys-polled' is already registered, aborting... [ 37.580000] usbcore: registered new interface driver rndis_host [ 57.320000] device eth0 entered promiscuous mode [ 58.000000] eth0: link up (1000Mbps/Full duplex) [ 58.030000] br-lan: port 1(eth0) entered forwarding state [ 58.030000] br-lan: port 1(eth0) entered forwarding state [ 60.030000] br-lan: port 1(eth0) entered forwarding state [ 60.960000] device wlan0 entered promiscuous mode [ 61.030000] br-lan: port 2(wlan0) entered forwarding state [ 61.040000] br-lan: port 2(wlan0) entered forwarding state [ 63.040000] br-lan: port 2(wlan0) entered forwarding state [ 70.560000] device wlan0 left promiscuous mode [ 70.560000] br-lan: port 2(wlan0) entered disabled state [ 71.320000] device wlan0 entered promiscuous mode [ 71.400000] br-lan: port 2(wlan0) entered forwarding state [ 71.410000] br-lan: port 2(wlan0) entered forwarding state [ 71.620000] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x00006400 [ 71.630000] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [ 73.410000] br-lan: port 2(wlan0) entered forwarding state [ 473.420000] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 473.570000] scsi0 : usb-storage 1-1:1.0 [ 473.590000] scsi1 : usb-storage 1-1:1.1 [ 474.110000] usb 1-1: USB disconnect, device number 2 [ 478.180000] usb 1-1: new high-speed USB device number 3 using ehci-platform [ 478.330000] cdc_ether 1-1:1.1: wwan0: register 'cdc_ether' at usb-ehci-platform-1, Mobile Broadband Network Device, 02:50:f3:00:00:00 [ 478.350000] scsi6 : usb-storage 1-1:1.5 [ 478.360000] scsi7 : usb-storage 1-1:1.6 [ 479.350000] scsi 6:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 [ 479.350000] scsi 6:0:0:0: Attached scsi generic sg0 type 5 [ 479.360000] scsi 7:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2 [ 479.370000] sd 7:0:0:0: Attached scsi generic sg1 type 0 [ 479.380000] sd 7:0:0:0: [sda] Attached SCSI removable disk [ 544.040000] usbcore: deregistering interface driver usbserial_generic [ 544.050000] USB Serial deregistering driver generic [ 544.050000] usbcore: deregistering interface driver usbserial [ 547.090000] usbcore: registered new interface driver usbserial [ 547.100000] USB Serial support registered for generic [ 547.100000] usbserial_generic 1-1:1.0: generic converter detected [ 547.110000] usb 1-1: generic converter now attached to ttyUSB0 [ 547.110000] usbserial_generic 1-1:1.3: generic converter detected [ 547.120000] usb 1-1: generic converter now attached to ttyUSB1 [ 547.130000] usbserial_generic 1-1:1.4: generic converter detected [ 547.130000] usb 1-1: generic converter now attached to ttyUSB2 [ 547.140000] usbcore: registered new interface driver usbserial_generic [ 547.140000] usbserial: USB Serial Driver core root@Pineapple:~#

hi all, please help? after days of searching forums etc… i can not find a 3g dongle that works here in the uk with the pineapple. I have plugged the dongle in to a windows machine and all ok, light stays blue on the dongle etc… Any help much appreciated! thanks. I think the one i have the best chance with is E173 for which i have listed the logs etc here for. Please take a look? root@Pineapple:~# lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 005: ID 12d1:1436 Huawei Technologies Co., Ltd. E173 3G Modem (modem-mode) i updated the script with the correct APN settings etc… but need some help please root@Pineapple:~# cat /pineapple/3g/3g 3g-keepalive.sh 3g.sh root@Pineapple:~# cat /pineapple/3g/3g.sh #!/bin/sh # --------------------------------------------------------- # 3G Connection Script for WiFi Pineapple. "Does the thing" # # Version: 2012-02-17 # Supports: # # ZTE MF591 (T-Mobile) -dkitchen # Novatel MC760 (Virgin) -dkitchen # Novatel MC760 (Ting) -dkitchen # Sierra 598u (Ting) -brianzimm # And more. # # Updates: wifipineapple.com # --------------------------------------------------------- # ----------------------------------------------------------- # Configure /etc/ppp/options with hard-coded working settings # ----------------------------------------------------------- echo " logfile /dev/null noaccomp nopcomp nocrtscts lock maxfail 0" > /etc/ppp/options # -------------------------------------------------------------------------------------------------- # Check for known usb modem vendor and product IDs then switch 'em from storage to serial modem mode # -------------------------------------------------------------------------------------------------- echo "Searching for attached 3G Modems" logger "3G: Connection Script here, searching for modems" MODEM=$(lsusb | awk '{ print $6 }') echo $MODEM case "$MODEM" in *19d2:1523*) echo "ZTE MF591 (T-Mobile) detected. Attempting mode switch" uci delete network.wan2 uci set network.wan2=interface uci set network.wan2.ifname=ppp0 uci set network.wan2.proto=3g uci set network.wan2.service=umts uci set network.wan2.device=/dev/ttyUSB0 uci set network.wan2.apn=epc.tmobile.com uci set network.wan2.username=internet uci set network.wan2.password=internet uci set network.wan2.defaultroute=1 uci commit network usb_modeswitch -v 19d2 -p 1523 -V 19d2 -P 1525 -M 5553424312345678000000000000061b000000020000000000000000000000 -n 1 -s 20 sleep 10; rmmod usbserial sleep 3; insmod usbserial vendor=0x19d2 product=0x1525 sleep 5; /etc/init.d/firewall disable; /etc/init.d/firewall stop logger "3G: firewall stopped" iptables -t nat -A POSTROUTING -s 172.16.42.0/24 -o 3g-wan2 -j MASQUERADE iptables -A FORWARD -s 172.16.42.0/24 -o 3g-wan2 -j ACCEPT iptables -A FORWARD -d 172.16.42.0/24 -m state --state ESTABLISHED,RELATED -i 3g-wan2 -j ACCEPT ;; *1410:6002* | *1410:5031*) echo "Novatel MC760 (Virgin Mobile) detected. Attempting mode switch" uci delete network.wan2 uci set network.wan2=interface uci set network.wan2.ifname=ppp0 uci set network.wan2.proto=3g uci set network.wan2.service=cdma uci set network.wan2.device=/dev/ttyUSB0 uci set network.wan2.username=internet uci set network.wan2.password=internet uci set network.wan2.defaultroute=1 uci set network.wan2.ppp_redial=persist uci set network.wan2.peerdns=0 uci set network.wan2.dns=8.8.8.8 uci set network.wan2.keepalive=1 uci set network.wan2.pppd_options=debug uci set network.wan2.pppd_options=noauth uci commit network usb_modeswitch -v 1410 -p 5031 -V 1410 -P 6002 -M 5553424312345678000000000000061b000000020000000000000000000000 -n 1 -s 20 sleep 10; rmmod usbserial sleep 3; insmod usbserial vendor=0x1410 product=0x6002 sleep 5; /etc/init.d/firewall disable; /etc/init.d/firewall stop logger "3G: firewall stopped" iptables -t nat -A POSTROUTING -s 172.16.42.0/24 -o 3g-wan2 -j MASQUERADE iptables -A FORWARD -s 172.16.42.0/24 -o 3g-wan2 -j ACCEPT iptables -A FORWARD -d 172.16.42.0/24 -m state --state ESTABLISHED,RELATED -i 3g-wan2 -j ACCEPT ;; *1410:5030*) echo "Novatel MC760 (Ting) detected. Attempting mode switch" uci delete network.wan2 uci set network.wan2=interface uci set network.wan2.ifname=ppp0 uci set network.wan2.proto=3g uci set network.wan2.service=cdma uci set network.wan2.device=/dev/ttyUSB0 uci set network.wan2.username=internet uci set network.wan2.password=internet uci set network.wan2.defaultroute=1 uci set network.wan2.ppp_redial=persist uci set network.wan2.peerdns=0 uci set network.wan2.dns=8.8.8.8 uci set network.wan2.keepalive=1 uci set network.wan2.pppd_options=debug uci set network.wan2.pppd_options=noauth uci commit network usb_modeswitch -v 1410 -p 5030 -V 1410 -P 6000 -M 5553424312345678000000000000061b000000020000000000000000000000 -n 1 -s 20 sleep 10; rmmod usbserial sleep 3; insmod usbserial vendor=0x1410 product=0x6000 sleep 5; /etc/init.d/firewall disable; /etc/init.d/firewall stop logger "3G: firewall stopped" iptables -t nat -A POSTROUTING -s 172.16.42.0/24 -o 3g-wan2 -j MASQUERADE iptables -A FORWARD -s 172.16.42.0/24 -o 3g-wan2 -j ACCEPT iptables -A FORWARD -d 172.16.42.0/24 -m state --state ESTABLISHED,RELATED -i 3g-wan2 -j ACCEPT ;; *1199:0025*) echo "Sierra 598u (Ting) detected. Attempting mode switch" uci delete network.wan2 uci set network.wan2=interface uci set network.wan2.ifname=ppp0 uci set network.wan2.proto=3g uci set network.wan2.service=cdma uci set network.wan2.device=/dev/ttyUSB0 uci set network.wan2.username=internet uci set network.wan2.password=internet uci set network.wan2.defaultroute=1 uci set network.wan2.ppp_redial=persist uci set network.wan2.peerdns=0 uci set network.wan2.dns=8.8.8.8 uci set network.wan2.keepalive=1 uci set network.wan2.pppd_options=debug uci set network.wan2.pppd_options=noauth uci commit network usb_modeswitch -v 1199 -p 0025 sleep 10; rmmod usbserial sleep 3; insmod usbserial vendor=0x1199 product=0x0025 sleep 5; /etc/init.d/firewall disable; /etc/init.d/firewall stop logger "3G: firewall stopped" iptables -t nat -A POSTROUTING -s 172.16.42.0/24 -o 3g-wan2 -j MASQUERADE iptables -A FORWARD -s 172.16.42.0/24 -o 3g-wan2 -j ACCEPT iptables -A FORWARD -d 172.16.42.0/24 -m state --state ESTABLISHED,RELATED -i 3g-wan2 -j ACCEPT ;; *12d1:1436*) echo "Huawei E173 detected. Attempting mode switch" uci delete network.wan2 uci set network.wan2=interface uci set network.wan2.ifname=ppp0 uci set network.wan2.proto=3g uci set network.wan2.service=umts uci set network.wan2.device=/dev/ttyUSB0 uci set network.wan2.apn=payandgo.o2.co.uk uci set network.wan2.username=payandgo uci set network.wan2.password=password uci set network.wan2.defaultroute=1 uci commit network usb_modeswitch -v 12d1 -p 1436 sleep 10; rmmod usbserial sleep 3; insmod usbserial vendor=0x12d1 product=0x1436 sleep 5; /etc/init.d/firewall disable; /etc/init.d/firewall stop logger "3G: firewall stopped" iptables -t nat -A POSTROUTING -s 172.16.42.0/24 -o 3g-wan2 -j MASQUERADE iptables -A FORWARD -s 172.16.42.0/24 -o 3g-wan2 -j ACCEPT iptables -A FORWARD -d 172.16.42.0/24 -m state --state ESTABLISHED,RELATED -i 3g-wan2 -j ACCEPT ;; *12d1:140c*) echo "Huawei Modem (3-IRL) detected. Attempting mode switch" uci delete network.wan2 uci set network.wan2=interface uci set network.wan2.ifname=ppp0 uci set network.wan2.proto=3g uci set network.wan2.service=umts uci set network.wan2.device=/dev/ttyUSB0 uci set network.wan2.apn=3internet uci set network.wan2.username= uci set network.wan2.password= uci set network.wan2.defaultroute=1 uci commit network usb_modeswitch -v 12d1 -p 140c -V 12d1 -P 140c -M 5553424312345678000000000000061b000000020000000000000000000000 -n 1 -s 20 sleep 10; rmmod usbserial sleep 3; insmod usbserial vendor=0x12d1 product=0x140c sleep 5; /etc/init.d/firewall disable; /etc/init.d/firewall stop logger "3G: firewall stopped" iptables -t nat -A POSTROUTING -s 172.16.42.0/24 -o 3g-wan2 -j MASQUERADE iptables -A FORWARD -s 172.16.42.0/24 -o 3g-wan2 -j ACCEPT iptables -A FORWARD -d 172.16.42.0/24 -m state --state ESTABLISHED,RELATED -i 3g-wan2 -j ACCEPT ;; esac root@Pineapple:~# ls /dev/ttyUSB* /dev/ttyUSB0 /dev/ttyUSB1 /dev/ttyUSB2 2.31 PQ: 0 ANSI: 2 Jan 1 00:12:46 Pineapple kern.notice kernel: [ 766.600000] sd 15:0:0:0: Attached scsi generic sg1 type 0 Jan 1 00:12:46 Pineapple kern.notice kernel: [ 766.610000] sd 15:0:0:0: [sda] Attached SCSI removable disk Jan 1 00:13:14 Pineapple user.notice usb-modeswitch: 1-1:1.1: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=? Jan 1 00:13:15 Pineapple user.notice usb-modeswitch: 1-1:1.0: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=? Jan 1 00:13:15 Pineapple user.notice usb-modeswitch: 1-1:1.1: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=? Jan 1 00:13:15 Pineapple user.notice usb-modeswitch: 1-1:1.2: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=? Jan 1 00:13:15 Pineapple user.notice usb-modeswitch: 1-1:1.3: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=? Jan 1 00:13:16 Pineapple user.notice usb-modeswitch: 1-1:1.4: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=? Jan 1 00:13:16 Pineapple user.notice usb-modeswitch: 1-1:1.5: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=? Jan 1 00:13:16 Pineapple user.notice usb-modeswitch: 1-1:1.6: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=? Jan 1 00:13:21 Pineapple user.notice root: 3G: Connection Script here, searching for modems Jan 1 00:13:34 Pineapple kern.info kernel: [ 814.670000] usbcore: deregistering interface driver usbserial_generic Jan 1 00:13:34 Pineapple kern.info kernel: [ 814.680000] generic ttyUSB2: generic converter now disconnected from ttyUSB2 Jan 1 00:13:34 Pineapple kern.info kernel: [ 814.680000] usbserial_generic 1-1:1.4: device disconnected Jan 1 00:13:34 Pineapple kern.info kernel: [ 814.690000] generic ttyUSB1: generic converter now disconnected from ttyUSB1 Jan 1 00:13:34 Pineapple kern.info kernel: [ 814.700000] usbserial_generic 1-1:1.3: device disconnected Jan 1 00:13:34 Pineapple kern.info kernel: [ 814.700000] generic ttyUSB0: generic converter now disconnected from ttyUSB0 Jan 1 00:13:34 Pineapple kern.info kernel: [ 814.710000] usbserial_generic 1-1:1.0: device disconnected Jan 1 00:13:34 Pineapple kern.info kernel: [ 814.710000] USB Serial deregistering driver generic Jan 1 00:13:34 Pineapple kern.info kernel: [ 814.720000] usbcore: deregistering interface driver usbserial Jan 1 00:13:37 Pineapple kern.info kernel: [ 817.760000] usbcore: registered new interface driver usbserial Jan 1 00:13:37 Pineapple kern.info kernel: [ 817.770000] USB Serial support registered for generic Jan 1 00:13:37 Pineapple kern.info kernel: [ 817.770000] usbserial_generic 1-1:1.0: generic converter detected Jan 1 00:13:37 Pineapple kern.info kernel: [ 817.780000] usb 1-1: generic converter now attached to ttyUSB0 Jan 1 00:13:37 Pineapple kern.info kernel: [ 817.780000] usbserial_generic 1-1:1.3: generic converter detected Jan 1 00:13:37 Pineapple kern.info kernel: [ 817.790000] usb 1-1: generic converter now attached to ttyUSB1 Jan 1 00:13:37 Pineapple kern.info kernel: [ 817.790000] usbserial_generic 1-1:1.4: generic converter detected Jan 1 00:13:37 Pineapple kern.info kernel: [ 817.800000] usb 1-1: generic converter now attached to ttyUSB2 Jan 1 00:13:37 Pineapple kern.info kernel: [ 817.800000] usbcore: registered new interface driver usbserial_generic Jan 1 00:13:37 Pineapple kern.info kernel: [ 817.810000] usbserial: USB Serial Driver core Jan 1 00:13:42 Pineapple user.notice root: 3G: firewall stopped root@Pineapple:~#

Yes - would love the answer to that as well :-) also is their a list of modems that work out of the box with the pineapple? e.g. i just bought in the UK a HUAWEI E3131 pay as you go Tmobile, will this work? Thanks.