Jump to content


Active Members
  • Posts

  • Joined

  • Last visited

Posts posted by RChadwick

  1. Well, I got a proper ST-Link V2, but get the exact error. I'm running Kali in a VM on Windows, and I'm thinking there might be a problem with the USB passthrough. I tried the Windows version of openocd under Windows, but couldn't get that to work either.

    This is what I got in Kali:

    root@kali:~/Desktop/PocketAdmin-master/firmware# make upload
    openocd -s ./openocd -f stlink-v2.cfg -f stm32f0x.cfg -c "program firmware.bin verify reset exit 0x08000000"
    Open On-Chip Debugger 0.8.0 (2014-10-20-21:48)
    Licensed under GNU GPL v2
    For bug reports, read
    Error: session's transport is not selected.
    Runtime Error: embedded:startup.tcl:20:
    in procedure 'script'
    at file "embedded:startup.tcl", line 58
    in procedure 'swj_newdap' called at file "./openocd/stm32f0x.cfg", line 34
    in procedure 'transport' called at file "/usr/share/openocd/scripts/target/swj-dp.tcl", line 26
    in procedure 'ocd_bouncer'
    at file "embedded:startup.tcl", line 20
    Makefile:23: recipe for target 'upload' failed
    make: *** [upload] Error 1


    This is what I got while experimenting under Windows:

    C:\temp\OpenOCD-20190828-0.10.0\bin>openocd -s ./openocd -f stlink-v2.cfg -f stm32f0x.cfg -c "program firmware.bin verify reset exit
    Open On-Chip Debugger 0.10.0 (2019-08-28) [https://github.com/sysprogs/openocd]
    Licensed under GNU GPL v2
    For bug reports, read
    Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
    Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
    stm32f0x.cfg:37: Error: target requires -dap parameter instead of -chain-position, see http://visualgdb.com/support/chainposition
    in procedure 'script'
    at file "embedded:startup.tcl", line 26
    at file "stm32f0x.cfg", line 37


  2. I think I found the problem. My cheap St-link v2 turned out to be a CH340 ttl serial adapter. I'll let you know how it goes when I get a working one.

    I was about 75% done making my own USB Rubber ducky, but abandoned it due to time constraints, and finding another project that did some of what I wanted. I was going to use a hardware MicroSD reader for speed, and was looking into a serial port to allow some feedback on the running script. Also, I was going to have the ability to run multiple scripts, as well as have one script call another. I really like your OS fingerprinting idea. I'm looking forward to playing with that.

  3. 14 hours ago, b0N3z said:

    the sd problem can be fixed with a usb stick mounted as /sd and editing the fstab.  Not to hard, I have it written down if you need it. shoot me a pm if you want.  I know the sd card is a problem but I have never really noticed an issue with the 2 nanos that I have and what I do.

    That might fix the SD card issue, but it breaks the 'I want three radios' issue.

    • Like 1
  4. Maybe I just don't understand the problem, but considering one could run their own DNS server, I see absolutely no reason for the limitation, which is one of the main reasons my Pineapple collects dust. Even a $3 ESP8266 can do an Evil Portal without Internet, which is where I put my interest nowadays.

  5. I've got a Lan Turtle on v2 firmware. I am unable to add modules (Same error message as others have posted), so I'm trying to upgrade to V3. Problem is, no matter what I do, after the upgrade it doesn't work, and the USB end keeps disconnecting every 25 seconds. I have tried holding the button, and uploading V3 Factory firmware. I've also tried SCP the firmware to /tmp, and running the update command. The results are always the same.

  6. The problem with software password managers, is they will always be vulnerable to malicious software. The easiest and most secure hardware password manager is the Mooltipass. Open source, debugged over the past few years, plugins for Chrome and Firefox, emulates a keyboard for compatible with all USB-equipped devices, and can work standalone with it's internal display. I have no idea how to hack this remotely.

  7. I'm looking for a way to gather a list of all nearby clients, including MAC addresses. In Linux, I do this:

    airodump-ng wlan0 -a --manufacturer --output-format CSV --write Open-

    However, I wanted to add Deauth to see if that would speed up things. Not wanting to add a 2nd Wifi adapter, I decided to dust off my Nano and see what it could do.

    Looking around, I don't see a clear way to do this. I can do a recon, but results are iffy, and I don't see a way to save the output. Ditto for the Site Survey module.

    Forgetting deauth for a moment, is the anything on the Nano that will save a list of nearby clients?

    Is my best option to just run the above line? Is there a quick and easy way to make that a module?

  8. Any updates?

    After my Pineapple collecting a few months of dust, I decided to fire it up today. I'm running the non-beta available in the package manager. For whatever reason, Ep couldn't see any of my portals. Not sure if the Symlink disappeared. Anyway, was going to just uninstall, and reinstall. What should I reinstall? Is the beta running OK? Any ETA on 3.0?

  9. From a theoretical point of view, you should definitely use a powered hub. From a practical perspective, it depends. If you use a hub that uses very little power on it's own, and plug in only 2 devices that themselves draw little current, and you give the nano 2 amps or more, you might manage it without problems.

  10. If it was mine, I'd resolder it, and use a very fine strand as a jumper over the trace. If needed, a small xacto knife will remove the coating from the remaining trace. As long as the mounting pads (The ones that will suffer the most stress) are strong, and you don't make too much of a mess on the lifted pad, things could be fixed 100%. I'd also use some IPA to remove any flux around the repair. Flux, and especially impurities it might attract, can affect RF. The tricky parts will be to get it straight, and to solder it well, but quickly. High heat has a way of lifting pads.

    After the repair, I'd carefully drill out the hole in the plastic so that the antenna doesn't stop at the plastic. That was one of the first mods I made, and have been very happy with it.

  11. Love the changes. I'm anxious to try this out as well!

    Also, as a feature request, it would be great if EP could control other plugins and Nano configs (Change network, SSID, start PineAP, DNSSpoof, etc). That way we could make a single package that we just need to enable.

  12. As it's obviously not a good idea to just remove power from the Nano, I'm curious if there was made an accommodation at a hardware level to shut down the Nano? Perhaps hitting the reset button? Maybe some unmarked solder pads that could be used to initiate a shutdown? Could the reset button be programmed so a quick push will initiate a shutdown?


  13. Thanks for the help. I've got another issue. If I connect to the EP, and try to go to aol.com, the portal shows up fine. However, if I go to a more complicated page, such as what Windows tries to go to when it detects a portal (go.microsoft.com/fwlink/?LinkID=246412&clid=0x412), I get the page minus any graphics. When I try to view any of the images, it just shows the webpage again, minus the graphics.

  14. You're right, PHP error. I modified php.ini and easily saw and corrected the errors.

    Another quick question... Are the files for the portal critical? For instance, I have my own php file that handles form input. Do I have to use myportal.php? Best I can tell, the only important thing is the portalname.ep file.

  15. I've got an odd issue. I've got a HTML page that I renamed to index.php. It works fine in XAMPP, but not in EP (Just get  blank screen). If I rename the index.php back to index.htm, and make sure there is no index.php in the directory, EP seems to pick up the index.htm, and everything works fine. Will this workaround be OK? Will future versions of EP force only using index.php?


  • Create New...