Jump to content

Neworld

Active Members
  • Posts

    227
  • Joined

  • Last visited

  • Days Won

    6

Everything posted by Neworld

  1. Alright guys here's my Pineapple + Raspberry setup. I'm running pwnpi on my raspberry and going to setup ics to the pineapple. Here's what I have: Pictures: http://www.flickr.co.../in/photostream http://www.flickr.co.../in/photostream http://www.flickr.co.../in/photostream http://www.flickr.co.../in/photostream http://www.flickr.co.../in/photostream http://www.flickr.co.../in/photostream http://www.flickr.co.../in/photostream http://www.flickr.co.../in/photostream http://www.flickr.co.../in/photostream Where I got the parts: mini wifi adapter- http://www.amazon.co...-Bit Compatible (still looking for good sd card) sd card- http://www.amazon.co...eywords=sd card Faster sd card- (I haven't tested, might work or may not) http://www.amazon.co... 10 Extreme Pro Alfa for deauth- http://www.amazon.co... NEWEST VERSION Usb for hub power- http://www.amazon.co... Connector Tips Replacement pigtail (in case you have low range)- http://www.amazon.co... Mini PCIe Wifi Anker battery- http://www.amazon.co...Astro3 10000mAh Usb hub- http://www.bestbuy.c...2&skuId=2389094 Pineapple mark 4- http://hakshop.mysho.../wifi-pineapple Raspberry Pi- http://www.element14...ps/raspberry-pi The other cords came with the Anker battery. I WILL BE POSTING VIDEOS SHORTLY ON SSHing TO THE PINEAPPLE THEN TO THE RASPBERRY, THEN DOING A VNC OVER SSH. (glad to finally contribute back to the community) :D
  2. Thanks... this was what I was looking for.
  3. I'm currently running my pineapple through a 9v, could this cause problems? I'm assuming it's fine, because the pineapple works with a 5v usb plug and also a 12v wall adapter. 9v is right in between, will this cause problems for the pineapple?
  4. I believe all sizes work, as long as it's partitioned and formatted correctly.
  5. make sure your usb is partitioned 80% and 20% .... also when doing this, uncheck the box that says take ownership when creating a partition. when you have both partitions then plug it into your pineapple and change the the "option enabled 0" to "option enabled 1"... Now click on the advanced tab and type in the command "mkswap /dev/sda2" Now reboot.... report the results
  6. You probably disabled "Obtain IP address automaticly" Make sure your not trying to connect to 172.16.42.1 with "Use the following IP address. This is under TCP/IPv4 under local connection (ethernet). goto- Control Panel\Network and Internet\Network and Sharing Center[/CODE]
  7. It won't work becuase the img src is pointing to /www/nyan/nyan.gif[/CODE] same with the audio [CODE]/www/nyan/NYAN.mp3[/CODE] try changing those to [CODE]usb/nyan/nyan.gif[/CODE] [CODE]usb/nyan/NYAN.mp3[/CODE] After that, link it to the /www/ folder and ect. ect. Hope this helps
  8. Here's the linux driver.... any way to integrate? http://www.rokland.c...36nhr-linux.zip Got it from this website... has instructions http://store.rokland...inux-compatible
  9. Its the Alfa AWUS036NHR.... is this one supported?
  10. Here is a video on a problem I've been having with my wifipineapple mark4... This is my newer pineapple that just came in the mail and is in out of box form. I updated to version 2.5.0. Problem: Alfa won't connect as external wifi under airmon-ng or iwconfig. The Alfa does however show up under lsusb. [media]
  11. If your still having trouble bringing up your html, it's probably because its pre cached... Delete your cache and try again.
  12. To get DNS spoof to work... go to the edit tab that says 172.16.42.1 example.com [/CODE] And change it to [CODE] 172.16.42.1 *facebook.com [/CODE] Now, using winscp, go to your redirect.php under the /www/ folder. Edit it to suit your needs.... mine looks like this [CODE] <?php $ref = "http://".$_SERVER['HTTP_HOST'].$_SERVER['REQUEST_URI']; if (strpos($ref, "facebook")) { header('Location: facebook.html'); } ?> [/CODE] Hope that helps :D
  13. You can see if your external Alfa is working by putting it into monitor mode... #This is a fast way to see if your Alfa is working airmon-ng airmon-ng start wlan1 airodump-ng mon0 #Should see access points airmon-ng stop mon0 [/CODE] Another command to see usb connections: [CODE] lsusb [/CODE]
  14. Thanks.... thats all I needed to hear! Happy camper. :D
  15. I'm considering getting a new Pineapple Mark 4 but am not sure if its worth it if there is a Mark 5 coming in the near future. My question is, is there any plans for a Mark 5? And if there is, how long away? I'd hate to buy another Mark 4 only to be pissed I didn't wait for the Mark 5. lol Any thoughts? :D
  16. Can someone post a link to a new pineapple board....
  17. A usb to serial converter won't work... I would recommend you get the usb one.
  18. I can interact with it though.... If you look at my previous post where I posted the code, you can see that I was successful at choosing 1, but once I choose 1 it just continues on without letting me get to the command prompt. It accepts that I chose 1, but it doesn't follow through with the procedure of giving me command prompt. :( Here is the code again that I posted: ~ U-Boot 1.1.4-g971cc15e-dirty (Sep 7 2011 - 11:44:55) AP121-8MB (ar9331) U-boot DRM: 32 MB T/p of RAM usable for U-Boot at: 82000000 Reserving 248k for U-Boot at: 81fc0000 Reserving 192k for malloc() at: 81f90000 Reserving 44 Bytes for Board Info at: 81f8ffd4 Reservin' 36 Bytes for Global Data at: 81f8ffb0 Reserving 128k for boot params() at: 81f6ffb0 Stack Pointer at: 81f6ff98 Now running in RAM - U-Boot at: 81fc0000 id read 0x100000ff flash size 8388608, sector count = 128 Flash: 8 MB In: serial Out: serial Err: serial Net: ag7240_enet_initialize... Fetching MAC ddr%ss from 0x81feb688 Fetching MAC Address from 0x81feb688 : cfg1 0x5 cfg2 0x7114 eth0: 00:c0:ca:63:1f:c5 eth0 up : cfg1 0xf cfg2 0x7214 eth1: 00:c0:ca:63:1f:c4 athrs26_reg_init_lan ATHRS26: r%setting s26 ATHR26: s26 r%set done eth1 up eth0, %th1 Please choose the operation: 1: Entr boot command line int%rfac%. 2: Load system code then write to Flash via TFTP. 3: Boot system c/de via Flash (default). You choosed 1 0 System Boot system code via Flash. ## Bo/ting image at 9f650000 ... Image Name: MIP OpenWrt Linux-3.2.14 Created: 2012-07-24 20:19:27 UTC Ima'e Type: MIPS Linux K%rnel Image (lzma com0ressed) Data Size: 890599 ytes = 869.7 k Load ddress: 80060000 Entry Point: 80060000 Verifying Checksum at 0x9f650040 ...OK Uncompressing Kernel Image ... OK No initrd ## Transferring control to Linux (at address 80060000) ... ## Giving linux memsize in bytes, 33554432 Starting +ernel ... [ 0.000000] L)nux version 3.2.14 (www-data@ubuntu) (gcc version 4.6.3 20120201 (prer%lease) (Linaro GCC 4.6-2012.02) ) #86 Tue Jul 24 1:18:41 EDT 2012 [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU revision is: 00019374 (MIPS 24Kc) [ 0.000000] SoC: Atheros AR9330 rev 1 [ 0.000000] Clocks: CU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz .000000] Determined physical RAM map: [ 0.000000] memory: 02000000 @ 00000000 (usable) [ 0.000000] Initrd not found /r empty - disabling in)trd [ 0.000000] Zone PN ranges: [ 0.000000] Normal 0x00000000 -> 0x00002000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0x0000000 -> 0x00002000 [ 0.000000] Built 1 zonelists in Zone order, -obility grouping on. Total pa'es: 8128 [ 0.000000] ernel command line: board=HORNE-UB console=ttyATH0,115200 mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6144k(rootfs),1600k(kernel),64k(nvram),64k(art)ro,7744+@0x50000(firmware) rootfstype=squashfs,jffs2 noinitrd [ 0.000000] PID ha3h table entries: 128 (order: -3, 512 bytes) [ 0.000000] Dentry cache hash table entries: 4096 (order:2, 16384 bytes) [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Primary instruction cache 64kB, VIT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Memory: 29332k/32768k available (2046k kernel code, 3436k reserve$, 387k data, 192k init, 0k highmem) inObjects=0, CUs=1, Nodes=1s=9, HWalign=32, Order=0-3, [ 0.000000] NR_IRQS:48 [ 0.000000] Calibrating delay loop... 265.42 BogoM PS (lpj=1327104) [ 0.080000] pid_max: default: 32768 minimu-: 301 [ 0.080000] Mount-cache hash table entr)es: 512 [ 0.090000] NET: Registered protocol family 16 [ 0.090000] MIPS: machine is ALFA NTWORKS Hornet-UB [ 0.530000] bio: create slab <bio-0> at 0 [ 0.540000] Switching to clocksource MIPS [ 0.550000] NET: Registered protocol family 2 [ 0.550000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.550000] TCP established hash table entries: 1024 (order: 1, 8192 bytes) [ 0.560000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.560000] TCP: Hash tables conf)gure$ (established 1024 bind 1024) [ 0.570000] TCP reno registered [ 0.570000] UDP ha3h table entries: 256 (order: 0, 4096 bytes) [ 0.580000] UDP-L)te hash table entries: 256 (order: 0, 4096 bytes) [ 0.580000] NET: Registered protocol family 1 [ 0.610000] squashfs: version 4.0 (2009/01/31) Phill)p Lougher [ 0.610000] JFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODEPRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.620000] msgmni has been set to 57 [ 0.630000] io scheduler noop r%gistered [ 0.630000] io scheduler deadline regist%red (default) [ 0.630000] S%rial: 8250/16550 driver, 1 ports, IRQ sharing disabled [ 0.640000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11) is a AR933X UART [ 0.650000] console [ttyATH0] %nabled, bootconsole disabled [ 0.650000] console [ttyATH0] %nabled, bootconsole disabled [ 0.660000] m25p80 spi0.0: found mx25l6405d, expected m25p80 [ 0.670000] m25p80 spi0.0: mx25l6405$ (8192 Kbytes) [ 0.670000] 7 c-dl)nepart partitions found on MTD device spi0.0 [ 0.680000] Creating 7 MTD partitions on "spi0.0": [ 0.680000] 0x000000000000-0x000000040000 : "u-boot" [ 0.690000] 0x000000040000-0x00000050000 : "u-boot-env" [ 0.690000] 0x000000050000-0x000000650000 : "rootfs" [ 0.700000] mtd: 0artition "rootfs" set to be root filesystem [ 0.700000] mtd: partition "rootfs_data" created automatically, ofs=570000, len=E0000 [ 0.710000] 0x000000570000-0x000000650000 : "rootfs_data" [ 0.720000] 0x000000650000-0x0000007e0000 : "kernel" [ 0.720000] 0x0000007e0000-0x0000007f0000 : "nvram" [ 0.730000] 0x0000007f0000-0x000000800000 : "art" [ 0.730000] 0x000000050000-0x0000007e0000 : "firmware" [ 0.980000] ag71xx_mdio: probed [ 0.980000] eth0: Atheros AG71xx at 0xba000000, irq 5 [ 1.570000] eth0: ound an AR7240/AR9330 built-in switch [ 2.800000] eth1: Atheros AG71xx at 0xb9000000, irq 4 [ 3.410000] ag71xx ag71xx.0: eth1: connected to Y at ag718x-mdio.1:04 [uid=004dd041, driver=Generic HY] [ 3.410000] TCP westwood r%gistered [ 3.420000] NET: Registered protocol family 17 [ 3.420000] 8021q: 802.1Q VLAN Support v1.8 [ 3.430000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2. [ 3.440000] Freeing unused kernel memory: 192k freed - preinit - Press the [f] key and hit [enter] to %nter failsafe -ode - regular preinit - [ 10.430000] JFFS2 notice: (426) jffs2_build_xattr_subsystem: complete building xattr subsystem, 13 of xdatum (1 unchecked, 12 orphan) and 221 of xref (0 dead, 213 orphan) found. [ 11.290000] CSI subsystem initiali:ed [ 11.590000] usbcore: registered new interface $river usbfs [ 11.590000] usbcore: registered new interface driver hub [ 11.600000] usbcor%: registered new device $river usb [ 12.170000] ehci_hcd: USB 2.0 'Enhanced' Host C/ntroller (EHCI) Driver 2.170000] ath79-ehci ar933x-ehci: Atheros bu)lt-in EHCI controller 2.180000] ath79-ehci ar933x-ehci: new USB bus registered, assigned bus number 1 [ 12.220000] ath79-ehci ar933x-ehc): irq 3, io mem 0x1b000000 [ 12.240000] ath79-ehci ar933x-ehci: UB 2.0 started, EHCI 1.00 [ 12.240000] hub 1-0:1.0: UB hub found [ 12.240000] hub 1-0:1.0: 1 port detected [ 12.370000] ohci_hcd: USB 1.1 'Open' Host Controller (OHI) Driver [ 12.480000] uhci_hcd: US Univ%rsal Host Contr/ller Interface driver [ 12.600000] Initializing USB Mass Storage driver... [ 12.600000] usbcore: registered new )nterface $river usb-storage [ 12.610000] USB Mass Storage support registered. switching to jffs2 - init - [ 33.080000] Kernel panic - not syncing: Attempted to kill init! [/CODE] as you can see, it did read my input and displayed You choosed 1 but doesn't return command prompt :( I'm considering getting another board if I can't do a complete rehash of the system. Keep in mind, this all started when I deleted my lib with winscp.... Thats why I'm clean flashing.
  19. NOTHING IS WORKING!!!!! IS there a way to completely revamp it?? I CAN'T EVEN GET TO COMMAND LINE ON IT!!! I need to redo the whole system.... how would I do this from it's current state? (keep in mind I can't get to command line on the pineapple)
  20. I think you misinterpreted what I posted before.... I can't type anything because I can't get to the command line.... When I "choose 1", it just continues on with the stuff afterwards. It never lets me get to the command line part. Is there a way around this?
  21. OKay guys GREAT NEWS!!! It works perfictly on 7 bits rather than 8 bits.... BAD NEWS is that I receive a Kernel Panic every time. Here's what I get ~ U-Boot 1.1.4-g971cc15e-dirty (Sep 7 2011 - 11:44:55) AP121-8MB (ar9331) U-boot DRAM: 32 MB Top /f RAM usable for U-Boot at: 82000000 Reserving 248k for U-Boot at: 81fc0000 Reserving 192k for malloc() at: 81f90000 Reserving 44 Bytes for Board Info at: 81f8ffd4 Reserving 36 Bytes for Global Data at: 81f8ffb0 Reserving 128k for boot params() at: 81f6ffb0 Stack Pointer at: 81f6ff98 Now running in RAM - U-Boot at: 81fc0000 id read 0x100000ff flash size 8388608, sector count = 128 Flash: 8 MB In: serial Out: serial Err: serial Net: ag7240_en%t_initialize... Fetching MAC Address from 0x81feb688 Fetching MAC Address from 0x81feb688 : cfg1 0x5 cfg2 0x7114 %th0: 00:c0:ca:63:1f:c5 eth0 up : cfg1 0xf cfg2 0x7214 eth1: 00:c0:ca:63:1f:c4 athrs26_reg_init_lan ATHRS26: r%sett)ng s26 ATHRS26: s26 reset done eth1 up eth0, eth1 Please choose the operation: 1: Entr boot command line interface. 2: Load system code then writ% to Fla3h via TFTP. 3: Boot system code via Flash (default). 0 9stem oot system c/de via Flash. ## Booting imag% at 9f650000 ... Image Name: MIPS OpenWrt Linux-3.2.14 Create$: 2012-07-24 20:19:27 UTC Image Type: MIPS Linux Kernel Image (lzma compressed) Data Size: 890599 Bytes = 869.7 kB Load Address: 80060000 Entry P/int: 80060000 V%rifyi.g Ch%cksum at 0x9f650040 ...OK Uncompressing Kernel I-age ... OK No initrd ## Tran3ferring control to Linux (at address 80060000) ... ## Giving linux memsize in bytes, 33554432 Starting +ernel ... [ 0.000000] Li.ux version 3.2.14 (www-data@ubuntu) ('cc version 4.6.3 20120201 (0r%r%lease) (Linaro GCC 4.6-2012.02) ) #86 Tue Jul 24 16:18:41 EDT 2012 [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU revision is: 00019374 (MIPS 24Kc) [ 0.000000] oC: Atheros AR9330 rev 1 [ 0.000000] Cl/cks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 02000000 @ 00000000 (usable) [ 0.000000] Initrd not foun$ /r e-pty - disabling initrd [ 0.000000] Zone FN ranges: [ 0.000000] Normal 0x00000000 -> 0x00002000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_nod%_map[1] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00002000 [ 0.000000] Built 1 zonelists in Zone order, m/bility grouping on. Total pages: 8128 [ 0.000000] Kernel command line: board=HONET-UB console=ttyATH0,115200 mtdparts=spi0.0:256k(u-boot)ro,64+(u-b/ot-e.v)ro,6144k(rootfs),1600k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware) rootfstype=squashfs,jffs2 noinitrd [ 0.000000] PID hash table entr)es: 128 (order: -3, 512 bytes) [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Primary instructi/n cache 64kB, VIT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Rea$back ErrCtl register=00000000 [ 0.000000] Memory: 29332k/32768k available (2046k kern%l code, 3436k reserve$, 387k data, 192k init, 0k highmem) [ 0.000000] SLUB: G%nslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NRIRQS:48 [ 0.000000] Calibrating delay loop... 265.42 BogoMIP (lpj=1327104) [ 0.080000] pid_max: default: 32768 minimum: 301 [ 0.080000] Mount-cache hash table entries: 512 [ 0.090000] NET: Reg)stered protocol family 16 [ 0.090000] MIPS: machine is ALFA NETWORKS Hornet-U [ 0.530000] bio: create slab <bio-0> at 0 [ 0.540000] Switching to clocksource MIP [ 0.550000] NET: Register%d protocol family 2 [ 0.550000] IP rout% cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.550000] TCP %stablished hash table entries: 1024 (order: 1, 8192 bytes) [ 0.560000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.560000] TCP: Hash tables configured (established 1024 bind 1024) [ 0.570000] TCP reno registered [ 0.570000] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.580000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.580000] NET: Register%d protocol fam)ly 1 [ 0.610000] squashfs: version 4.0 (2009/01/31) Phillip L/ugher [ 0.610000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.620000] msgmni has been set to 57 [ 0.630000] io scheduler noop registered [ 0.630000] io scheduler deadlin% registered (default) [ 0.630000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled [ 0.640000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11) is a AR933X UAR [ 0.650000] console [ttyATH0] %nabled, bootconsole disabled [ 0.650000] console [ttyATH0] enabled, bootconsole disabled [ 0.660000] -25p80 spi0.0: found mx25l6405d, exp%cted m25p80 [ 0.670000] m25p80 s0i0.0: mx25l6405d (8192 Kbytes) [ 0.670000] 7 cmdlinepart part)tions found on MTD device spi0.0 [ 0.680000] Creating 7 MTD partit)ons on "spi0.0": [ 0.680000] 0x000000000000-0x000000040000 : "u-boot" [ 0.690000] 0x000000040000-0x000000050000 : "u-boot-env" [ 0.690000] 0x000000050000-0x000000650000 : "rootfs" [ 0.700000] mtd: partition "rootfs" set to be root filesystem [ 0.700000] mtd: partit)on "rootfsdata" created automatically, ofs=570000, len=E0000 [ 0.710000] 0x000000570000-0x000000650000 : "ro/tfs_data" [ 0.720000] 0x000000650000-0x0000007e0000 : "kernel" [ 0.720000] 0x0000007e0000-0x0000007f0000 : "nvra-" [ 0.730000] 0x0000007f0000-0x000000800000 : "art" [ 0.730000] 0x000000050000-0x0000007e0000 : "fir-ware" [ 0.980000] ag71xx_mdio: prob%d [ 0.980000] eth0: Atheros AG71xx at 0xba000000, irq 5 [ 1.570000] eth0: Found an AR7240/AR9330 built-in switch [ 2.800000] eth1: Atheros AG71xx at 0xb9000000, irq 4 [ 3.410000] ag71xx ag71xx.0: %th1: connecte$ to HY at ag718x-mdio.1:04 [uid=004dd041, driver=Generic PHY] [ 3.410000] TCP westwood registered [ 3.420000] NET: Registered protocol family 17 [ 3.420000] 8021q: 802.1Q VLAN Sup0ort v1.8 [ 3.430000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2. [ 3.440000] Freeing unused kernel memory: 192k freed - preinit - Press the [f] key and hit [enter] to enter failsafe mode - regular prein)t - [ 10.380000] JFFS2 notice: (426) jffs2_build_xattr_subsystem: complete building xattr subsystem, 13 of 8datum (1 unchecked, 12 orphan) and 221 of xref (0 dead, 213 orphan) found. [ 11.240000] SCSI subsystem initialized [ 11.540000] usbcore: registered new interface driver usbfs [ 11.540000] usbcor%: registered new interface driver hub [ 11.550000] usbcore: registered new device driver usb [ 12.120000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 12.120000] ath79-ehci ar933x-ehci: Atheros built-in EHCI controller [ 12.130000] ath79-ehci ar933x-ehci: new USB bus registered, assigned bus number 1 [ 12.160000] ath79-ehci ar933x-ehci: irq 3, io mem 0x1b000000 [ 12.180000] ath79-ehci ar933x-ehc): USB 2.0 started, EHCI 1.00 [ 12.180000] hub 1-0:1.0: USB hub found [ 12.180000] hub 1-0:1.0: 1 port detected [ 12.310000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 12.420000] uhci_hcd: USB Universal Host Controller Interface driver [ 12.540000] Initializing USB Mass Storage driver... [ 12.540000] usbcore: registered new interface $river usb-storage [ 12.550000] USB Mass Storage support registered. switching to jffs2 - init - [ 33.020000] Kernel panic - not syncing: ttempted to kill init! [/CODE] I even try choosing 1 at the beginning, but it just goes right past it... [CODE] ~ U-Boot 1.1.4-g971cc15e-dirty (Sep 7 2011 - 11:44:55) AP121-8MB (ar9331) U-boot DRM: 32 MB T/p of RAM usable for U-Boot at: 82000000 Reserving 248k for U-Boot at: 81fc0000 Reserving 192k for malloc() at: 81f90000 Reserving 44 Bytes for Board Info at: 81f8ffd4 Reservin' 36 Bytes for Global Data at: 81f8ffb0 Reserving 128k for boot params() at: 81f6ffb0 Stack Pointer at: 81f6ff98 Now running in RAM - U-Boot at: 81fc0000 id read 0x100000ff flash size 8388608, sector count = 128 Flash: 8 MB In: serial Out: serial Err: serial Net: ag7240_enet_initialize... Fetching MAC ddr%ss from 0x81feb688 Fetching MAC Address from 0x81feb688 : cfg1 0x5 cfg2 0x7114 eth0: 00:c0:ca:63:1f:c5 eth0 up : cfg1 0xf cfg2 0x7214 eth1: 00:c0:ca:63:1f:c4 athrs26_reg_init_lan ATHRS26: r%setting s26 ATHR26: s26 r%set done eth1 up eth0, %th1 Please choose the operation: 1: Entr boot command line int%rfac%. 2: Load system code then write to Flash via TFTP. 3: Boot system c/de via Flash (default). You choosed 1 0 System Boot system code via Flash. ## Bo/ting image at 9f650000 ... Image Name: MIP OpenWrt Linux-3.2.14 Created: 2012-07-24 20:19:27 UTC Ima'e Type: MIPS Linux K%rnel Image (lzma com0ressed) Data Size: 890599 ytes = 869.7 k Load ddress: 80060000 Entry Point: 80060000 Verifying Checksum at 0x9f650040 ...OK Uncompressing Kernel Image ... OK No initrd ## Transferring control to Linux (at address 80060000) ... ## Giving linux memsize in bytes, 33554432 Starting +ernel ... [ 0.000000] L)nux version 3.2.14 (www-data@ubuntu) (gcc version 4.6.3 20120201 (prer%lease) (Linaro GCC 4.6-2012.02) ) #86 Tue Jul 24 1:18:41 EDT 2012 [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU revision is: 00019374 (MIPS 24Kc) [ 0.000000] SoC: Atheros AR9330 rev 1 [ 0.000000] Clocks: CU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz .000000] Determined physical RAM map: [ 0.000000] memory: 02000000 @ 00000000 (usable) [ 0.000000] Initrd not found /r empty - disabling in)trd [ 0.000000] Zone PN ranges: [ 0.000000] Normal 0x00000000 -> 0x00002000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0x0000000 -> 0x00002000 [ 0.000000] Built 1 zonelists in Zone order, -obility grouping on. Total pa'es: 8128 [ 0.000000] ernel command line: board=HORNE-UB console=ttyATH0,115200 mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6144k(rootfs),1600k(kernel),64k(nvram),64k(art)ro,7744+@0x50000(firmware) rootfstype=squashfs,jffs2 noinitrd [ 0.000000] PID ha3h table entries: 128 (order: -3, 512 bytes) [ 0.000000] Dentry cache hash table entries: 4096 (order:2, 16384 bytes) [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Primary instruction cache 64kB, VIT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Memory: 29332k/32768k available (2046k kernel code, 3436k reserve$, 387k data, 192k init, 0k highmem) inObjects=0, CUs=1, Nodes=1s=9, HWalign=32, Order=0-3, [ 0.000000] NR_IRQS:48 [ 0.000000] Calibrating delay loop... 265.42 BogoM PS (lpj=1327104) [ 0.080000] pid_max: default: 32768 minimu-: 301 [ 0.080000] Mount-cache hash table entr)es: 512 [ 0.090000] NET: Registered protocol family 16 [ 0.090000] MIPS: machine is ALFA NTWORKS Hornet-UB [ 0.530000] bio: create slab <bio-0> at 0 [ 0.540000] Switching to clocksource MIPS [ 0.550000] NET: Registered protocol family 2 [ 0.550000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.550000] TCP established hash table entries: 1024 (order: 1, 8192 bytes) [ 0.560000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.560000] TCP: Hash tables conf)gure$ (established 1024 bind 1024) [ 0.570000] TCP reno registered [ 0.570000] UDP ha3h table entries: 256 (order: 0, 4096 bytes) [ 0.580000] UDP-L)te hash table entries: 256 (order: 0, 4096 bytes) [ 0.580000] NET: Registered protocol family 1 [ 0.610000] squashfs: version 4.0 (2009/01/31) Phill)p Lougher [ 0.610000] JFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODEPRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.620000] msgmni has been set to 57 [ 0.630000] io scheduler noop r%gistered [ 0.630000] io scheduler deadline regist%red (default) [ 0.630000] S%rial: 8250/16550 driver, 1 ports, IRQ sharing disabled [ 0.640000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11) is a AR933X UART [ 0.650000] console [ttyATH0] %nabled, bootconsole disabled [ 0.650000] console [ttyATH0] %nabled, bootconsole disabled [ 0.660000] m25p80 spi0.0: found mx25l6405d, expected m25p80 [ 0.670000] m25p80 spi0.0: mx25l6405$ (8192 Kbytes) [ 0.670000] 7 c-dl)nepart partitions found on MTD device spi0.0 [ 0.680000] Creating 7 MTD partitions on "spi0.0": [ 0.680000] 0x000000000000-0x000000040000 : "u-boot" [ 0.690000] 0x000000040000-0x00000050000 : "u-boot-env" [ 0.690000] 0x000000050000-0x000000650000 : "rootfs" [ 0.700000] mtd: 0artition "rootfs" set to be root filesystem [ 0.700000] mtd: partition "rootfs_data" created automatically, ofs=570000, len=E0000 [ 0.710000] 0x000000570000-0x000000650000 : "rootfs_data" [ 0.720000] 0x000000650000-0x0000007e0000 : "kernel" [ 0.720000] 0x0000007e0000-0x0000007f0000 : "nvram" [ 0.730000] 0x0000007f0000-0x000000800000 : "art" [ 0.730000] 0x000000050000-0x0000007e0000 : "firmware" [ 0.980000] ag71xx_mdio: probed [ 0.980000] eth0: Atheros AG71xx at 0xba000000, irq 5 [ 1.570000] eth0: ound an AR7240/AR9330 built-in switch [ 2.800000] eth1: Atheros AG71xx at 0xb9000000, irq 4 [ 3.410000] ag71xx ag71xx.0: eth1: connected to Y at ag718x-mdio.1:04 [uid=004dd041, driver=Generic HY] [ 3.410000] TCP westwood r%gistered [ 3.420000] NET: Registered protocol family 17 [ 3.420000] 8021q: 802.1Q VLAN Support v1.8 [ 3.430000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2. [ 3.440000] Freeing unused kernel memory: 192k freed - preinit - Press the [f] key and hit [enter] to %nter failsafe -ode - regular preinit - [ 10.430000] JFFS2 notice: (426) jffs2_build_xattr_subsystem: complete building xattr subsystem, 13 of xdatum (1 unchecked, 12 orphan) and 221 of xref (0 dead, 213 orphan) found. [ 11.290000] CSI subsystem initiali:ed [ 11.590000] usbcore: registered new interface $river usbfs [ 11.590000] usbcore: registered new interface driver hub [ 11.600000] usbcor%: registered new device $river usb [ 12.170000] ehci_hcd: USB 2.0 'Enhanced' Host C/ntroller (EHCI) Driver 2.170000] ath79-ehci ar933x-ehci: Atheros bu)lt-in EHCI controller 2.180000] ath79-ehci ar933x-ehci: new USB bus registered, assigned bus number 1 [ 12.220000] ath79-ehci ar933x-ehc): irq 3, io mem 0x1b000000 [ 12.240000] ath79-ehci ar933x-ehci: UB 2.0 started, EHCI 1.00 [ 12.240000] hub 1-0:1.0: UB hub found [ 12.240000] hub 1-0:1.0: 1 port detected [ 12.370000] ohci_hcd: USB 1.1 'Open' Host Controller (OHI) Driver [ 12.480000] uhci_hcd: US Univ%rsal Host Contr/ller Interface driver [ 12.600000] Initializing USB Mass Storage driver... [ 12.600000] usbcore: registered new )nterface $river usb-storage [ 12.610000] USB Mass Storage support registered. switching to jffs2 - init - [ 33.080000] Kernel panic - not syncing: Attempted to kill init! [/CODE] This is a nightmare lol P.S. I deleted my lib folder in winscp and thats why I'm clean flashing.... If that makes a difference.
  22. "Sigh" I have tried this.... I will try again on another computer today and report back my findings.
×
×
  • Create New...