sickduck

Thank you very much! I had to use "sleep 20" for it to work for me. What USB 3G modem are you using? I was unable to use the MicroSD card in the dongle but everytime I would boot with the 3G and another flash drive it would not work and this fixed it.

I think I found the problem. I didn't see this in the logs before: Pineapple user.info sysinit: /www/pineapple/3g/3g.sh: line 149: syntax error: unexpected newline [/CODE] I just commented out the entire Huawei E173 part of the 3g.sh script. I guess the <<>> was throwing off the script perhaps.

Reflashed 2.4.1 - MC760 still not working Reflashed 2.3.1 - MD760 works great

My apologizes. It is working fine now. I powered off everything and let it sit overnight. So that did the trick or maybe it was just me that needed an overnight reboot. Thank you.

MK4 2.4.1 Novatel Wireless MC760 3G USB does not work on 2.4.1. It worked on version prior to 2.4.0. I inserted it prior to booting the Pineapple and 3G bootup is enabled. I also tried inserting it after the Pineapple booted and then running the force connection script. Pineapple is plugged into the AC adapter. I have tried it both with a usb hub with flashdrive and MC760 and just the MC760 plugged in the USB port. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 1410:6002 Novatel Wireless System log (Modem serial redacted) 00:00:55 Pineapple user.info sysinit: Selected interface 'wlan0' 00:00:55 Pineapple user.info sysinit: OK 00:00:55 Pineapple kern.info kernel: [ 55.450000] br-lan: port 1(wlan0) entering forwarding state 00:00:55 Pineapple kern.info kernel: [ 55.440000] device wlan0 entered promiscuous mode 00:00:55 Pineapple kern.info kernel: [ 55.440000] br-lan: port 1(wlan0) entering forwarding state 00:00:55 Pineapple kern.info kernel: [ 55.290000] device wlan0 left promiscuous mode 00:00:55 Pineapple kern.info kernel: [ 55.290000] br-lan: port 1(wlan0) entering forwarding state 00:00:54 Pineapple user.notice usb-modeswitch: 1-1:1.4: Manufacturer=Novatel_Wireless_Inc. Product=Novatel_Wireless_CDMA Serial=XXXXXXXXXXXXXX 00:00:54 Pineapple user.notice usb-modeswitch: 1-1:1.2: Manufacturer=Novatel_Wireless_Inc. Product=Novatel_Wireless_CDMA Serial=XXXXXXXXXXXXXX 00:00:54 Pineapple user.notice usb-modeswitch: 1-1:1.1: Manufacturer=Novatel_Wireless_Inc. Product=Novatel_Wireless_CDMA Serial=XXXXXXXXXXXXXX 00:00:54 Pineapple user.notice usb-modeswitch: 1-1:1.0: Manufacturer=Novatel_Wireless_Inc. Product=Novatel_Wireless_CDMA Serial=XXXXXXXXXXXXX 00:00:54 Pineapple kern.info kernel: [ 54.940000] br-lan: port 1(wlan0) entering forwarding state 00:00:54 Pineapple kern.info kernel: [ 54.940000] br-lan: port 1(wlan0) entering forwarding state 00:00:53 Pineapple kern.info kernel: [ 53.270000] device wlan0 entered promiscuous mode 00:00:52 Pineapple kern.info kernel: [ 52.070000] br-lan: port 2(eth0) entering disabled state 00:00:52 Pineapple kern.info kernel: [ 52.060000] device wlan0 left promiscuous mode 00:00:52 Pineapple kern.info kernel: [ 52.060000] device eth0 left promiscuous mode 00:00:52 Pineapple kern.info kernel: [ 52.060000] br-lan: port 1(wlan0) entering disabled state 00:00:51 Pineapple user.notice ifup: Enabling Router Solicitations on loopback (lo) 00:00:51 Pineapple user.info autossh[1440]: starting ssh (count 1) 00:00:51 Pineapple user.info autossh[1440]: ssh child pid is 1447 00:00:51 Pineapple user.err autossh[1440]: ssh exited prematurely with status 1; autossh exiting 00:00:51 Pineapple kern.info kernel: [ 51.390000] device eth0 entered promiscuous mode 00:00:51 Pineapple daemon.warn dnsmasq[1400]: no servers found in /tmp/resolv.conf.auto, will retry 00:00:51 Pineapple daemon.info dnsmasq[1400]: using local addresses only for domain lan 00:00:51 Pineapple daemon.info dnsmasq[1400]: started, version 2.59 cachesize 150 00:00:51 Pineapple daemon.info dnsmasq[1400]: read /etc/hosts - 1 addresses 00:00:51 Pineapple daemon.info dnsmasq[1400]: compile time options: IPv6 GNU-getopt no-DBus no-i18n DHCP TFTP no-conntrack no-IDN 00:00:51 Pineapple daemon.info dnsmasq-dhcp[1400]: read /etc/ethers - 0 addresses 00:00:51 Pineapple daemon.info dnsmasq-dhcp[1400]: DHCP, IP range 172.16.42.100 -- 172.16.42.249, lease time 12h 00:00:49 Pineapple kern.err kernel: [ 49.690000] Unable to find swap-space signature 00:00:49 Pineapple kern.err kernel: [ 49.290000] Unable to find swap-space signature 00:00:48 Pineapple kern.err kernel: [ 48.870000] Unable to find swap-space signature 00:00:48 Pineapple kern.err kernel: [ 48.370000] Unable to find swap-space signature 00:00:47 Pineapple user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses! 00:00:47 Pineapple user.notice dnsmasq: Allowing 127.0.0.0/8 responses 00:00:47 Pineapple user.info sysinit: udhcpc: sendto: Network is down 00:00:46 Pineapple authpriv.info dropbear[1053]: Running in background 00:00:45 Pineapple kern.info kernel: [ 45.320000] device wlan0 entered promiscuous mode 00:00:45 Pineapple kern.info kernel: [ 45.060000] device wlan0 left promiscuous mode 00:00:45 Pineapple kern.info kernel: [ 45.060000] br-lan: port 1(wlan0) entering disabled state 00:00:45 Pineapple kern.err kernel: [ 45.950000] Unable to find swap-space signature 00:00:45 Pineapple cron.info crond[1020]: crond: crond (busybox 1.19.4) started, log level 5 00:00:44 Pineapple kern.err kernel: [ 44.850000] Unable to find swap-space signature 00:00:43 Pineapple user.notice usb-modeswitch: 1-1:1.1: Manufacturer=Novatel_Wireless_Inc. Product=Novatel_Wireless_CDMA Serial=XXXXXXXXXXXXXXX 00:00:43 Pineapple syslog.notice usb_modeswitch: switched to 1410:6002 on 001/002 00:00:43 Pineapple kern.notice kernel: [ 43.480000] sd 2:0:0:0: [sda] Attached SCSI removable disk 00:00:43 Pineapple kern.notice kernel: [ 43.460000] sd 2:0:0:0: Attached scsi generic sg0 type 0 00:00:43 Pineapple kern.notice kernel: [ 43.450000] scsi 2:0:0:0: Direct-Access Novatel MMC Storage 2.31 PQ: 0 ANSI: 2 00:00:42 Pineapple kern.warn kernel: [ 42.360000] usb 1-1: config 1 has no interface number 3 00:00:42 Pineapple kern.warn kernel: [ 42.360000] usb 1-1: config 1 has an invalid interface number: 4 but max is 3 00:00:42 Pineapple kern.info kernel: [ 42.700000] device wlan0 entered promiscuous mode 00:00:42 Pineapple kern.info kernel: [ 42.450000] scsi2 : usb-storage 1-1:1.4 00:00:42 Pineapple kern.info kernel: [ 42.190000] usb 1-1: new full-speed USB device number 3 using ath79-ehci 00:00:40 Pineapple user.notice usb-modeswitch: 1-1:1.0: Selecting /etc/usb_modeswitch.d/1410:5031 for mode switching 00:00:40 Pineapple user.notice usb-modeswitch: 1-1:1.0: Manufacturer=Novatel_Wireless_Inc. Product=Novatel_Wireless_CDMA Serial=XXXXXXXXXXXXXX 00:00:40 Pineapple user.notice usb-modeswitch: 1-0:1.0: Manufacturer=Linux_3.2.14_ehci_hcd Product=Atheros_built-in_EHCI_controller Serial=ar933x-ehci 00:00:40 Pineapple syslog.notice usb_modeswitch: switching device 1410:5031 on 001/002 00:00:40 Pineapple kern.info kernel: [ 40.910000] usb 1-1: USB disconnect, device number 2 00:00:38 Pineapple kern.warn kernel: [ 0.660000] m25p80 spi0.0: found mx25l6405d, expected m25p80 00:00:38 Pineapple kern.notice kernel: [ 13.870000] scsi 1:0:0:0: Direct-Access Novatel MMC Storage 2.31 PQ: 0 ANSI: 2 00:00:38 Pineapple kern.notice kernel: [ 13.860000] scsi 0:0:0:0: CD-ROM Novatel Mass Storage 1.00 PQ: 0 ANSI: 2 00:00:38 Pineapple kern.notice kernel: [ 11.290000] SCSI subsystem initialized 00:00:38 Pineapple kern.notice kernel: [ 10.420000] JFFS2 notice: (426) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 14 of xref (0 dead, 7 orphan) found. 00:00:38 Pineapple kern.notice kernel: [ 0.730000] 0x0000007f0000-0x000000800000 : "art" 00:00:38 Pineapple kern.notice kernel: [ 0.730000] 0x000000050000-0x0000007e0000 : "firmware" 00:00:38 Pineapple kern.notice kernel: [ 0.720000] 0x0000007e0000-0x0000007f0000 : "nvram" 00:00:38 Pineapple kern.notice kernel: [ 0.720000] 0x000000650000-0x0000007e0000 : "kernel" 00:00:38 Pineapple kern.notice kernel: [ 0.710000] 0x000000570000-0x000000650000 : "rootfs_data" 00:00:38 Pineapple kern.notice kernel: [ 0.700000] mtd: partition "rootfs" set to be root filesystem 00:00:38 Pineapple kern.notice kernel: [ 0.690000] 0x000000050000-0x000000650000 : "rootfs" 00:00:38 Pineapple kern.notice kernel: [ 0.690000] 0x000000040000-0x000000050000 : "u-boot-env" 00:00:38 Pineapple kern.notice kernel: [ 0.680000] Creating 7 MTD partitions on "spi0.0": 00:00:38 Pineapple kern.notice kernel: [ 0.680000] 0x000000000000-0x000000040000 : "u-boot" 00:00:38 Pineapple kern.notice kernel: [ 0.670000] 7 cmdlinepart partitions found on MTD device spi0.0 00:00:38 Pineapple kern.info kernel: [ 12.860000] scsi1 : usb-storage 1-1:1.1 00:00:38 Pineapple kern.info kernel: [ 12.850000] scsi0 : usb-storage 1-1:1.0 00:00:38 Pineapple kern.info kernel: [ 12.700000] usb 1-1: new full-speed USB device number 2 using ath79-ehci 00:00:38 Pineapple kern.info kernel: [ 12.600000] USB Mass Storage support registered. 00:00:38 Pineapple kern.info kernel: [ 12.590000] usbcore: registered new interface driver usb-storage 00:00:38 Pineapple kern.info kernel: [ 12.590000] Initializing USB Mass Storage driver... 00:00:38 Pineapple kern.info kernel: [ 12.470000] uhci_hcd: USB Universal Host Controller Interface driver 00:00:38 Pineapple kern.info kernel: [ 12.360000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver 00:00:38 Pineapple kern.info kernel: [ 12.230000] hub 1-0:1.0: USB hub found 00:00:38 Pineapple kern.info kernel: [ 12.230000] hub 1-0:1.0: 1 port detected 00:00:38 Pineapple kern.info kernel: [ 12.230000] ath79-ehci ar933x-ehci: USB 2.0 started, EHCI 1.00 00:00:38 Pineapple kern.info kernel: [ 12.210000] ath79-ehci ar933x-ehci: irq 3, io mem 0x1b000000 00:00:38 Pineapple kern.info kernel: [ 12.170000] ath79-ehci ar933x-ehci: new USB bus registered, assigned bus number 1 00:00:38 Pineapple kern.info kernel: [ 12.160000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver 00:00:38 Pineapple kern.info kernel: [ 12.160000] ath79-ehci ar933x-ehci: Atheros built-in EHCI controller 00:00:38 Pineapple kern.info kernel: [ 11.590000] usbcore: registered new interface driver hub 00:00:38 Pineapple kern.info kernel: [ 11.590000] usbcore: registered new device driver usb 00:00:38 Pineapple kern.info kernel: [ 11.580000] usbcore: registered new interface driver usbfs 00:00:38 Pineapple kern.info kernel: [ 3.440000] Freeing unused kernel memory: 192k freed 00:00:38 Pineapple kern.info kernel: [ 3.430000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2. 00:00:38 Pineapple kern.info kernel: [ 3.420000] NET: Registered protocol family 17 00:00:38 Pineapple kern.info kernel: [ 3.420000] 8021q: 802.1Q VLAN Support v1.8 00:00:38 Pineapple kern.info kernel: [ 3.410000] ag71xx ag71xx.0: eth1: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY] 00:00:38 Pineapple kern.info kernel: [ 3.410000] TCP westwood registered 00:00:38 Pineapple kern.info kernel: [ 2.800000] eth1: Atheros AG71xx at 0xb9000000, irq 4 00:00:38 Pineapple kern.info kernel: [ 1.570000] eth0: Found an AR7240/AR9330 built-in switch 00:00:38 Pineapple kern.info kernel: [ 0.980000] eth0: Atheros AG71xx at 0xba000000, irq 5 00:00:38 Pineapple kern.info kernel: [ 0.980000] ag71xx_mdio: probed 00:00:38 Pineapple kern.info kernel: [ 0.700000] mtd: partition "rootfs_data" created automatically, ofs=570000, len=E0000 00:00:38 Pineapple kern.info kernel: [ 0.670000] m25p80 spi0.0: mx25l6405d (8192 Kbytes) 00:00:38 Pineapple kern.info kernel: [ 0.650000] console [ttyATH0] enabled, bootconsole disabled 00:00:38 Pineapple kern.info kernel: [ 0.640000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11) is a AR933X UART 00:00:38 Pineapple kern.info kernel: [ 0.630000] io scheduler noop registered 00:00:38 Pineapple kern.info kernel: [ 0.630000] io scheduler deadline registered (default) 00:00:38 Pineapple kern.info kernel: [ 0.630000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled 00:00:38 Pineapple kern.info kernel: [ 0.620000] msgmni has been set to 57 00:00:38 Pineapple kern.debug kernel: [ 7.110000] Registered led device: alfa:blue:wps 00:00:38 Pineapple kern.debug kernel: [ 7.110000] Registered led device: alfa:blue:wlan 00:00:38 Pineapple kern.debug kernel: [ 7.110000] Registered led device: alfa:blue:wan 00:00:38 Pineapple kern.debug kernel: [ 7.110000] Registered led device: alfa:blue:usb 00:00:38 Pineapple kern.debug kernel: [ 7.110000] Registered led device: alfa:blue:lan 20:03:33 Pineapple daemon.info dnsmasq-dhcp[1400]: DHCPREQUEST(br-lan) 172.16.42.225 70:f1:a1:db:a6:bb 20:03:33 Pineapple daemon.info dnsmasq-dhcp[1400]: DHCPREQUEST(br-lan) 172.16.42.225 70:f1:a1:db:a6:bb 20:03:33 Pineapple daemon.info dnsmasq-dhcp[1400]: DHCPACK(br-lan) 172.16.42.225 70:f1:a1:db:a6:bb claptop 20:03:33 Pineapple daemon.info dnsmasq-dhcp[1400]: DHCPACK(br-lan) 172.16.42.225 70:f1:a1:db:a6:bb claptop 20:03:05 Pineapple daemon.info hostapd: wlan0: STA 70:f1:a1:db:a6:bb IEEE 802.11: authenticated 20:03:05 Pineapple daemon.info hostapd: wlan0: STA 70:f1:a1:db:a6:bb IEEE 802.11: associated (aid 1) 20:03:00 Pineapple kern.info kernel: [ 180.240000] eth0: link down 20:02:23 Pineapple kern.info kernel: [ 143.880000] eth0: link up (1000Mbps/Full duplex) 20:02:22 Pineapple kern.info kernel: [ 142.160000] eth0: link down 20:02:16 Pineapple kern.info kernel: [ 136.040000] eth0: link up (1000Mbps/Full duplex) 20:02:14 Pineapple kern.info kernel: [ 134.320000] eth0: link down 20:01:48 Pineapple kern.info kernel: [ 108.340000] eth0: link up (1000Mbps/Full duplex) 20:01:10 Pineapple kern.info kernel: [ 70.480000] br-lan: port 1(wlan0) entering forwarding state 20:01:01 Pineapple user.notice ifup: Enabling Router Solicitations on lan (br-lan) 20:01:01 Pineapple user.info autossh[2088]: starting ssh (count 1) 20:01:01 Pineapple user.info autossh[2088]: ssh child pid is 2089 20:01:01 Pineapple user.err autossh[2088]: ssh exited prematurely with status 1; autossh exiting 20:01:01 Pineapple daemon.info dnsmasq[1400]: using nameserver 8.8.8.8#53 20:01:01 Pineapple daemon.info dnsmasq[1400]: using local addresses only for domain lan 20:01:01 Pineapple daemon.info dnsmasq[1400]: reading /tmp/resolv.conf.auto 20:00:59 Pineapple user.info sysinit: sh: write error: Invalid argument 20:00:59 Pineapple user.info sysinit: sh: write error: Invalid argument 20:00:59 Pineapple user.info sysinit: setting up led WLAN 20:00:59 Pineapple user.info sysinit: setting up led WAN 20:00:59 Pineapple user.info sysinit: setting up led USB 20:00:59 Pineapple user.info sysinit: setting up led LAN 20:00:59 Pineapple user.info sysinit: 1d6b:0002 1410:6002 20:00:59 Pineapple user.info sysinit: /www/pineapple/3g/3g.sh: line 149: syntax error: unexpected newline 20:00:59 Pineapple user.info sysinit: /etc/rc.common: eval: line 1: can't create /sys/class/leds/alfa:blue:wan/mode: nonexistent directory 20:00:59 Pineapple user.info sysinit: /etc/rc.common: eval: line 1: can't create /sys/class/leds/alfa:blue:wan/device_name: nonexistent directory 20:00:59 Pineapple user.info sysinit: /etc/rc.common: eval: line 1: can't create /sys/class/leds/alfa:blue:lan/mode: nonexistent directory 20:00:59 Pineapple user.info sysinit: /etc/rc.common: eval: line 1: can't create /sys/class/leds/alfa:blue:lan/device_name: nonexistent directory 20:00:59 Pineapple daemon.info dnsmasq[1400]: using nameserver 8.8.8.8#53 20:00:59 Pineapple daemon.info dnsmasq[1400]: using local addresses only for domain lan 20:00:59 Pineapple daemon.info dnsmasq[1400]: reading /tmp/resolv.conf.auto 20:00:57 Pineapple user.notice ifup: Enabling Router Solicitations on lan (br-lan) 20:00:57 Pineapple user.info autossh[1926]: starting ssh (count 1) 20:00:57 Pineapple user.info autossh[1926]: ssh child pid is 1927 20:00:57 Pineapple user.err autossh[1926]: ssh exited prematurely with status 1; autossh exiting 20:00:55 Pineapple user.notice root: 3G: Connection Script here, searching for modems 20:00:55 Pineapple user.info sysinit: Searching for attached 3G Modems

MK4 2.4.1 Booting the Pineapple with the POE/LAN port connected to a computer will cause the Pineapple not to work. I am unable to access the Pineapple via LAN or Wifi. I am unable to ping or access the web configuration via LAN or Wifi. The Pineapple broadcasts it's SSID and I am able to connect to it via Wifi but the DHCP server must not be working because I am getting an APIPA (169.254). NIC on my computer is set to 172.16.42.42. The link light is lit on my NIC. If I disconnect the LAN cable then power cycle the Pineapple I can connect to if I connect the LAN cable after it is already booted.

Here is a script that will run the iptables command and launch sslstrip with the date and time as the logfile in /usb. It works when running it from a SSH terminal but for some reason it doesn't seem to work from the WPS button script. #!/bin/sh iptables -t nat -A PREROUTING -p tcp --destination-port 80 -j REDIRECT --to-ports 10000 iptables -t nat -A PREROUTING -p tcp --destination-port 443 -j REDIRECT --to-ports 10000 _now=$(date +"%Y%m%d-%H%M%S") _file="/usb/sslstrip_$_now.log" sslstrip -w $_file [/CODE]

Thank you all very much. I think I got it working partly. I didn't install any of the packages. I just copied the HTML and PHP files to /www and the other folders (Such as facebook_files) to /usb/www/ then created a symbolic link in /www to the /usb/www folder. However, I cannot get it to redirect properly. I have DNS spoof running and on my test machine when I go to http://www.facebook.com for example it takes me to the redirect.php page and displays the Peets landing page and does not redirect to facebook.html like it should with "if (strpos($ref, "facebook")) { header('Location: facebook.html'); }"

Pineapple Hardware Version (ex: Mark III, Mark IV, etc.): Mark IV Pineapple Software Version (ex: Shmoocon Beta, 1.0, etc.): 2.31 OS used to connect to the pineapple: Windows 7 All the tools/options that are running on the pineapple when the issue happened: No, fresh reflash Is the problem repeatable (Yes/No): Yes Steps taken which created the problem: http://forums.hak5.org/index.php?showtopic=25882 Error Messages: scp: /root/php4-cgi_4.4.7-1_mips.ipk: No space left on device Log file information: I followed the instructions at http://forums.hak5.org/index.php?showtopic=25882 to enable USB swap. I tried to instal the phish-pineapple stuff from http://hak5.org/hack/pineapple-phishing and I always get a "No space left on device" error when I SCP the install files to the pineapple. df confirms that it is full but I thought by using the USB swap it would allow it more space. root@Pineapple:~# mount rootfs on / type rootfs (rw) /dev/root on /rom type squashfs (ro,relatime) proc on /proc type proc (rw,noatime) sysfs on /sys type sysfs (rw,noatime) tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime,size=14764k) tmpfs on /dev type tmpfs (rw,noatime,size=512k,mode=755) devpts on /dev/pts type devpts (rw,noatime,mode=600) /dev/mtdblock3 on /overlay type jffs2 (rw,noatime) overlayfs:/overlay on / type overlayfs (rw,relatime,lowerdir=/,upperdir=/overlay) debugfs on /sys/kernel/debug type debugfs (rw,relatime) /dev/sda1 on /usb type ext4 (rw,sync,relatime,user_xattr,barrier=1,data=ordered) none on /proc/bus/usb type usbfs (rw,relatime) root@Pineapple:~# df -h Filesystem Size Used Available Use% Mounted on rootfs 896.0K 220.0K 676.0K 25% / /dev/root 5.3M 5.3M 0 100% /rom tmpfs 14.4M 100.0K 14.3M 1% /tmp tmpfs 512.0K 0 512.0K 0% /dev /dev/mtdblock3 896.0K 220.0K 676.0K 25% /overlay overlayfs:/overlay 896.0K 220.0K 676.0K 25% / /dev/sda1 2.8G 106.3M 2.5G 4% /usb root@Pineapple:~# free total used free shared buffers Mem: 29524 24344 5180 0 3360 -/+ buffers: 20984 8540 Swap: 980216 0 980216 root@Pineapple:~# After I attempt to SCP the files to /root I get the error "scp: /root/php4-cgi_4.4.7-1_mips.ipk: No space left on device" and df shows root@Pineapple:/usb/modules/sslstrip# df -h Filesystem Size Used Available Use% Mounted on rootfs 896.0K 888.0K 8.0K 99% / /dev/root 5.3M 5.3M 0 100% /rom tmpfs 14.4M 1.8M 12.6M 12% /tmp tmpfs 512.0K 0 512.0K 0% /dev /dev/mtdblock3 896.0K 888.0K 8.0K 99% /overlay overlayfs:/overlay 896.0K 888.0K 8.0K 99% / /dev/sda1 2.8G 125.6M 2.5G 5% /usb Is there something wrong with my setup? Or is the Pineapple Phishing tutorial no longer valid on the MK4? Must I install everything on the USB?