Jump to content

NullNull

Active Members
  • Posts

    210
  • Joined

  • Last visited

  • Days Won

    6

Everything posted by NullNull

  1. I am really noob at this but is there a way to control this 4Ch Relay Module through the pineapple? Link: http://imall.iteadst...m120525002.html
  2. WM should we wait for a release of something like the keylogger module or you are working on this anymore?
  3. THANK YOU for your great work petertfm! :D I will try it as soon as i get back to my pineapple :D
  4. Good job metalayer :D I will try this too :D
  5. I think interceptor is the word you are looking for ;) ...
  6. I have two astro3, one for my iphone and one for my pineapple so i did some test's a few weeks ago. (all the times are counted while the pineapple was using WM's "jammer" module jamming all netwroks in range with the alfa nha, wich mean's CPU usage over 90% and maximum power sucking from the nha). Here is what i saw: No! It is not possible to connect two astro3 in parallel. I made a simple Y cable to try this but they have an electronic system wich turns the battery off if it is not supllying power for 30 secs. So only one will stay on, powering the pineapple and the other wiil turn off after 30 secs. Mayde someone with bigger knowlege for electrical/electronic systems can suggest us a way to bypass this but i doubt. But there are ways to use both batteries at the same time: 1) Use one to power the pineapple with 5, 9 or 12 V (i suggest 9) and one to power the usb hub with 5 V 2000ma (as petertfm said). In this case my usb hub is working like this: is using as much as it can's the power comming from the pineapple and the the rest from the battery wich is powering the hub. In my opinion (always talking for mine usb hub) the power to suply the devices connected to it (NHA and usb stick) is 60% from the pineapple and 40% from the second battery. So when the battery powering the pineapple turns down the battery powering the hub wiil steel have 35-40% power left. Total time online: 12+/-1 hours 2) Use one to power the pineapple with 5, 9 or 12 V (i suggest 9) [#2] and one to power the NHA with a Y cable with 5V 2000ma [#1]. If you do not plan to use the alfa NHA for a long time use also a cable to power the hub from the battery powering the alfa alse don't.[#1]. Total time online: 17+/-1 hours | 3) Use one to power the pineapple with 5 V 2000ma [#2] and one with a Y usb cable to power the NHA with 5V 2000ma[#1]. In this case you are backfeeding the pineapple.I have no idea why this is dangerous for the pineapple but if the forum member's say not to do it i wont. For backfeeding to take plase (so u can use both batteries to power the pineapple) both baterries must have the same Volts as output and because the NHA can only work with 5V the pineapple must be powered with 5V also. If you suply 9V to the pineapple backfeeding will not take place. Total time online: 21+/-1 hours I DO NOT RECOMMEND BACKFEEDING!
  7. The unltimate RickRoll..... http://m.9gag.com/gag/5388347 :P
  8. Very nice work from farfel but I am using this apples "issue" when redirecting all trafic to pineapple with out supplying Internet to it so the user won't be able to use e.g. Facebook app or any ather application. If the user could use Applications password sniffing will be impossible. And I think it is better if you are using redirectAll with out supplying internet safari just to pop up so the user won't understand that he isnot actually connected to the internet.
  9. This should be add it at the frimware so the user could choose every time which interface he want to use through the UI. Speed and range of the "KarmaNetwork" will increase!
  10. Very nice script! I use it every time i reflash my pineapple! It would be very handy if you would use it not only after a reflash but multiple times, e.g. every time you want to turn on/off a feauter. For example autoStartRedirectAll. Because now if you run ti twice it is not so smooth... it adds the same lines without cheking them... Again VERY nice script!
  11. I think is one of the best options ;)
  12. I Am using the same battery, it has 5/9/12 V outputs... The range that the pineapple can work is between 5 and 12 V... Even by using the 12 V output by mistake it will nOt damage your pineapple but is risky.. The best is the 9 V output..
  13. I am having this problem since the first version, also with firefox.
  14. telot i agree with you but that's why this subforum was created for.. For reporting issues we have with the pineapple. I know there are a lot of other things much more important than this but that's as far as my knowledge can reach. :)
  15. Every time i execute airmon-ng from ssh i get this as an output: root@Pineapple:~# airmon-ng Interface Chipset Driver mon0 Atheros ath9k - [phy0] wlan0 Atheros ath9k - [phy0] mon.wlan0 Atheros ath9k - [phy0] IEEE Unknown Unknown (MONITOR MODE NOT SUPPORTED) 802.11bgn Unknown Unknown (MONITOR MODE NOT SUPPORTED) Mode:Monitor Unknown Unknown (MONITOR MODE NOT SUPPORTED) Frequency:2.412 Unknown Unknown (MONITOR MODE NOT SUPPORTED) GHz Unknown Unknown (MONITOR MODE NOT SUPPORTED) Tx-Power=18 Unknown Unknown (MONITOR MODE NOT SUPPORTED) dBm Unknown Unknown (MONITOR MODE NOT SUPPORTED) at the 7 last lines it thinks that mon.wlan0 information (iwconfig mon.wlan0) are interfaces. This is happening since 2.0.0 in every upgrade i made and as i saw in the forum i am not the only one getting this output.
  16. is there any deference between the reboot button in the UI with rebooting from ssh by reboot command?
  17. i was already using a powered usb hub so i tried to lower the tx power as petertfm siad... seems to be working:) thank you all for your replies!!
  18. That would be correct if i wanted to use pineapples interface (wlan0) but i want to use airodump with the alfa (in my case wlan1)
  19. Thank you very much for your search! So i see that the output of airmon-ng may not be correct but is normal. (We have to post this on bugs section..) But the alfa is steel not working. After some tests i noticed that every time i connect the alfa to the pineapple and turn the monitor mode on it will stop working after 15-20 minutes. It will steel show up as wlan1 and mon0, channels will be hoping with airodump-ng mon0 but i will so no networks and the blue light from the alfa will go off (thing very stange because it turns on as long as monitor mode or data transfer exists)
  20. I am having issues with the wifi signal too. I get -80dbi at 10 feet with eye contact. I changed the channel, i unplugged and replugged the RP-SMA to U.FL cable but nothing helped. So i purchased two of these I am expecting them this week, i will repost with the results. P.S. I also purchased this which i found interesting, it's male to two 2 RP-SMA female T Connector Adapter EDIT: Changing this cable solved the problem! :D
  21. Very useful!! We are waiting for the new features like Rename Copy etc!!! Maybe Drag and Drop :D ?
  22. wlan0 is pineapples interface wlan1 is the alfa NHR mon0 is monitor mode from wlan1 (i was using tha jammer before executing the command) [EDIT] After executing the following commands i get no networks with airodump airmon-ng sto mon0 ifconfig wlan1 down airmon-ng start wlan1
  23. every time i run airmon-ng through ssh i get this as an output: root@Pineapple:/# airmon-ng Interface Chipset Driver mon0 Atheros ath9k - [phy0] wlan1 Atheros ath9k - [phy1] wlan0 Atheros ath9k - [phy0] mon.wlan0 Atheros ath9k - [phy0] IEEE Unknown Unknown (MONITOR MODE NOT SUPPORTED) 802.11bgn Unknown Unknown (MONITOR MODE NOT SUPPORTED) Mode:Monitor Unknown Unknown (MONITOR MODE NOT SUPPORTED) Frequency:2.462 Unknown Unknown (MONITOR MODE NOT SUPPORTED) GHz Unknown Unknown (MONITOR MODE NOT SUPPORTED) Tx-Power=18 Unknown Unknown (MONITOR MODE NOT SUPPORTED) dBm Unknown Unknown (MONITOR MODE NOT SUPPORTED) root@Pineapple:/# is actually the output from iwconfig... is this normal? putting interfaces in monitor mode works fine, is just an output problem i thing..(?)
  24. I think many people who need to expand pineapples range would like to see it in a future version. :) thank you :)
×
×
  • Create New...