Jump to content

tom564

Active Members
  • Posts

    95
  • Joined

  • Last visited

Everything posted by tom564

  1. I am sure you will be able to find an expert on Google who will build you a fourum for a reasonable rate... or you could find one of the hundreds of guides that are already out there
  2. Some clients that have connected to an open wireless AP in the past will connect, however newer devices may not.
  3. No, The pineapple also does not work with any encrypted networks as the clients will not connect to an open AP when it is expecting a WPA one. Even if it did the way WPA works does not involve sending the pass phrase over the network IIRC.
  4. I don't know exactly what you are asking but i will attempt to give you an answer. Everything (i think) that is done on the pineapple can already be done with a computer and a wireless radio that is capable of packet injection etc. If you are asking if a RTL_SDR radio dongle could be used to perform pineapple like functions it can't as it is locked to receive only and is incapable of the 2.4Ghz band in any usable form.
  5. I played around with veil using a reverse meterpreter payload and py2exe and was able to make an undetected file. I also read somewhere to not use virus total as it may result in quicker detection as they share signatures but i don't currently remember the alternative.
  6. HTTPS is not that simple to decrypt, you can't just share a decryption table as a new symmetric key is derived for each session AFAIK. You need to either attack an application that does not check the validity of the SSL cert and use one that you sign or somehow obtain a trusted certificate signed by a CA for the site you wish to impersonate.
  7. Maybe hardcoded IP's into the app? or cached DNS?
  8. The DNS querys are still done unencrypted with HTTPS so i think DNSspoof should still work. the problem i think you would have is the browser moaning about the cert not matching etc.
  9. The biggest delay is the initial one for it to install drivers IIRC, most of the other ones are not really a problem
  10. Maybe look into DNS spoof and running your own phishing pages?
  11. I just did the same thing, i bought a domain name from domain.com and pointed the name servers to namecheaps free DNS service as they have a capability for dynamic updates.
  12. I like it :P, would it be possible to make it so it is not every post and have it increase in frequency over time?
  13. Yeh i think that is the way i will have to go. After thinking about it i don't really need real time results and can play back capture files every x minutes
  14. Sorry i should of stated. I need it to be passive and to not have to be connected to the network.
  15. Has anyone managed to get driftnet to work on a monitor interface in real time? I am able to play back previous captures after i run it through airdecap-ng and replay it but after hours of experimenting i have been unable to get it to work in real or near real time.
  16. You said you did this for good but did you attempt to contact the vendor prior to disclosing?
  17. Check out http://www.reddit.com/r/talesfromtechsupport/ for some good ones.
  18. Speaking of high gain antennas, i tried to use my ALFA 9DBi antenna with one of the cards and ran airdump-ng but all of the SSID's seemed like they were being corrupted. Anyone else experienced this?
  19. This looks like it might suit your purpose http://www.microsoft.com/en-us/download/details.aspx?id=15155 assuming windows
  20. Thanks, can you recommend a specific hub that will not back feed? i did try to cut the red wire but that caused other issues.
  21. Do they want you to be able to remove files from your work computer? it seems like you are trying to avoid them knowing that you are transferring this data.
  22. Hello, I would like to be able to capture data on 3 channels simultaneously using 3 separate radios, i have been having problems with the USB devices initializing and staying up which i assume to be a power related issue so my first question is: What would you use to power the cards? and my second question is: How much computational power do i need if it is a fairly busy network (is trying to run it on a raspberry pi unobtainable? Thanks,
  23. I would of never thought that toasters would have much information to share... but sounds interesting, good luck.
×
×
  • Create New...