surbo

well done

SET options 2 Website Attack Vectors 3 Credential Harvester Attack Method 2 Site Cloner put in the url you wish to clone use https or http Please make sure you have permission to test -later

I will give it a go since you are not a skiddie =) You can reverse it for your education

Here is my config to add a US AT&T 3g Modem. You can use this as a guide. Just swap out the 6 options below listed in my config. Example: 1199 68a3 Put in your carriers apn Example: uci set network.wan2.apn=wap.cingular I hope this helps #!/bin/sh # --------------------------------------------------------- # 3G Connection Script for WiFi Pineapple. "Does the thing" # # Version: 2012-02-17 # Supports: # # Sierra USB 308 -SuRb0 # ZTE MF591 (T-Mobile) -dkitchen # Novatel MC760 (Virgin) -dkitchen # Novatel MC760 (Ting) -dkitchen # # Updated: wifipineapple.com # --------------------------------------------------------- # ----------------------------------------------------------- # Configure /etc/ppp/options with hard-coded working settings # ----------------------------------------------------------- echo " logfile /dev/null noaccomp nopcomp nocrtscts lock maxfail 0" > /etc/ppp/options # -------------------------------------------------------------------------------------------------- # Check for known usb modem vendor and product IDs then switch 'em from storage to serial modem mode # -------------------------------------------------------------------------------------------------- echo "Searching for attached 3G Modems" logger "3G: Connection Script here, searching for modems" MODEM=$(lsusb | awk '{ print $6 }') echo $MODEM case "$MODEM" in *1199:68a3*) echo "Sierra USB 308" uci delete network.wan2 uci set network.wan2=interface uci set network.wan2.ifname=ppp0 uci set network.wan2.proto=3g uci set network.wan2.service=umts uci set network.wan2.device=/dev/ttyUSB0 uci set network.wan2.apn=wap.cingular uci set network.wan2.username= uci set network.wan2.password= uci set network.wan2.defaultroute=1 uci commit network usb_modeswitch -v 1199 -p 68a3 sleep 10; rmmod usbserial sleep 3; insmod usbserial vendor=0x1199 product=0x68a3 sleep 5; /etc/init.d/firewall disable; /etc/init.d/firewall stop logger "3G: firewall stopped" iptables -t nat -A POSTROUTING -s 172.16.42.0/24 -o 3g-wan2 -j MASQUERADE iptables -A FORWARD -s 172.16.42.0/24 -o 3g-wan2 -j ACCEPT iptables -A FORWARD -d 172.16.42.0/24 -m state --state ESTABLISHED,RELATED -i 3g-wan2 -j ACCEPT ;; *19d2:1523*) echo "ZTE MF591 (T-Mobile) detected. Attempting mode switch" uci delete network.wan2 uci set network.wan2=interface uci set network.wan2.ifname=ppp0 uci set network.wan2.proto=3g uci set network.wan2.service=umts uci set network.wan2.device=/dev/ttyUSB0 uci set network.wan2.apn=epc.tmobile.com uci set network.wan2.username=internet uci set network.wan2.password=internet uci set network.wan2.defaultroute=1 uci commit network usb_modeswitch -v 19d2 -p 1523 -V 19d2 -P 1525 -M 5553424312345678000000000000061b000000020000000000000000000000 -n 1 -s 20 sleep 10; rmmod usbserial sleep 3; insmod usbserial vendor=0x19d2 product=0x1525 sleep 5; /etc/init.d/firewall disable; /etc/init.d/firewall stop logger "3G: firewall stopped" iptables -t nat -A POSTROUTING -s 172.16.42.0/24 -o 3g-wan2 -j MASQUERADE iptables -A FORWARD -s 172.16.42.0/24 -o 3g-wan2 -j ACCEPT iptables -A FORWARD -d 172.16.42.0/24 -m state --state ESTABLISHED,RELATED -i 3g-wan2 -j ACCEPT ;; *1410:5031*) echo "Novatel MC760 (Virgin Mobile) detected. Attempting mode switch" uci delete network.wan2 uci set network.wan2=interface uci set network.wan2.ifname=ppp0 uci set network.wan2.proto=3g uci set network.wan2.service=cdma uci set network.wan2.device=/dev/ttyUSB0 uci set network.wan2.username=internet uci set network.wan2.password=internet uci set network.wan2.defaultroute=1 uci set network.wan2.ppp_redial=persist uci set network.wan2.peerdns=0 uci set network.wan2.dns=8.8.8.8 uci set network.wan2.keepalive=1 uci set network.wan2.pppd_options=debug uci set network.wan2.pppd_options=noauth uci commit network usb_modeswitch -v 1410 -p 5031 -V 1410 -P 6002 -M 5553424312345678000000000000061b000000020000000000000000000000 -n 1 -s 20 sleep 10; rmmod usbserial sleep 3; insmod usbserial vendor=-x1410 product=0x6002 sleep 5; /etc/init.d/firewall disable; /etc/init.d/firewall stop logger "3G: firewall stopped" iptables -t nat -A POSTROUTING -s 172.16.42.0/24 -o 3g-wan2 -j MASQUERADE iptables -A FORWARD -s 172.16.42.0/24 -o 3g-wan2 -j ACCEPT iptables -A FORWARD -d 172.16.42.0/24 -m state --state ESTABLISHED,RELATED -i 3g-wan2 -j ACCEPT ;; *1410:5030*) echo "Novatel MC760 (Ting) detected. Attempting mode switch" uci delete network.wan2 uci set network.wan2=interface uci set network.wan2.ifname=ppp0 uci set network.wan2.proto=3g uci set network.wan2.service=cdma uci set network.wan2.device=/dev/ttyUSB0 uci set network.wan2.username=internet uci set network.wan2.password=internet uci set network.wan2.defaultroute=1 uci set network.wan2.ppp_redial=persist uci set network.wan2.peerdns=0 uci set network.wan2.dns=8.8.8.8 uci set network.wan2.keepalive=1 uci set network.wan2.pppd_options=debug uci set network.wan2.pppd_options=noauth uci commit network usb_modeswitch -v 1410 -p 5030 -V 1410 -P 6000 -M 5553424312345678000000000000061b000000020000000000000000000000 -n 1 -s 20 sleep 10; rmmod usbserial sleep 3; insmod usbserial vendor=0x1410 product=0x6000 sleep 5; /etc/init.d/firewall disable; /etc/init.d/firewall stop logger "3G: firewall stopped" iptables -t nat -A POSTROUTING -s 172.16.42.0/24 -o 3g-wan2 -j MASQUERADE iptables -A FORWARD -s 172.16.42.0/24 -o 3g-wan2 -j ACCEPT iptables -A FORWARD -d 172.16.42.0/24 -m state --state ESTABLISHED,RELATED -i 3g-wan2 -j ACCEPT ;; esac

If you guys want to clone a site like hulu's login page, just use (SET) on the backtrack security cd. Use the clone option and then use the saved html that SET builds. I don't think I will create a tutorial for this as I am really not sure what your ideas behind this are. If you figure it out more power to ya. -suRbo