gazzdingo
-
Posts
32 -
Joined
-
Last visited
Posts posted by gazzdingo
-
-
nice work love it :)
-
no it is not i re installed on two different windows computers i am thinking that the ttl uart is faulty i have checked over every thing so i orders another one to check. (waiting for it to come live in new zealand)
-
Try changing around your TX and RX cables per the wiki suggestion.
http://cloud.wifipineapple.com/wiki/doku.php?id=guidecleanflashserial#hardware_used
i am seeing all the data in the terminal I just cant select 1 in the menu it just by passes it
-
No I am using one off eBay but the same as the hakshop
-
I followed the guide and every thing was right I have got the flow control set to none on putty and on the com port settings
-
i have been trying to flash the hornet-ub board and when i get in to putty and load it up i can not select option 1. it just does the 3 second count down then it will just continue on to default one what is option 3 please help
-
how did you guys not find them i just assumed that people had seen them
-
i thought that this had already been covered with images but i could not find any thing on it and i want to change the images and the videos on all webpages.
-
same thing here have tried almost every thing to fix it and no luck best bet buying another one they arnt that expensive but if you find a way yell out i have broken 2 of them
-
I was going to order that one, but the dimensions that were posted on Amazon would make it too large to fit in the case with cables plugged into it. After seeing someone who had bought one and put it in his 1050 case, it looks like it'll fit just fine, and the dimensions on Amazon are wrong. I still like that the 8400mHa version gives me plenty of room to work and run my extra cables.
woops I didn't even stop to thing about the size. but I am just going to get the 10000mHa, as I have plenty of room to work with and it gives me the 12v option for running all the usb stuff.
-
1x Anker 8400mHa - http://www.amazon.com/gp/product/B0067TQQI8/ref=oh_details_o01_s00_i00
wouldn't this one be better as you can have a higher voltage so the pineapple will run smoother? http://www.amazon.com/gp/product/B005NGKR54
-
Isn't that the original port?
-
Hey there I was playing around and I forgot what I set the port to is there any way of finding that out when I ssh in to it ?
-
On further review it seems that your Swap and USB drive may work but you just can't see that from SSH???
yer well i did all that and i have reformatted it 2 times and when i issue:
mount | grep /usb
it says that there is only the mount point /dev/sda1
-
Maybe try a re-flash without the USB inserted?
Do you remember if you had it plugged in or not during the last upgrade you did?
no i didnt have it in
-
already tried that and it come up with /dev/sda1 and i tried swaping it and it didnt work ?
-
and yer i did follow it and it was working fine before i upgraded it looks like the partitions are not working as i tried mkswap /dev/sda
-
You followed this? http://forums.hak5.o...showtopic=25882
what does
dmesg | grep USB[/CODE] show? Please use spoiler tags for large pastes. [code] [ 15.020000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 15.030000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1 [ 15.090000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00 [ 15.090000] hub 1-0:1.0: USB hub found [ 15.720000] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 15.940000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 16.070000] uhci_hcd: USB Universal Host Controller Interface driver [ 16.500000] USB Serial support registered for generic [ 16.510000] usbserial: USB Serial Driver core [ 16.540000] Initializing USB Mass Storage driver... [ 16.560000] USB Mass Storage support registered.
-
just type
cd /usb
[/CODE]Of course when you have a USB flash installed that is formatted in EXT4
that is what i was doing and i even did
cd ..
ls
and there was no usb file and i have my usb in there with EXT4
-
dont no if it is just me but i can't find the /usb file when i ssh and i also tied to issue mkswap /dev/sda2 and it said it cant find it. this has all happened since i updated to 2.7.0
-
You didn't accidentally plug in the 5v line did you?
no it was 3.3v i took a picture and all and i looked at it then and it was on the right ones
-
So have you successfully flashed it now?
If not, and you are saying that with ONLY power connected (no serial, usb, ethernet) you get not LEDs, I would say your hornet-ub board is broken.
Best Regards,
Sebkinne
yer i think that it is broken as well i was just checking that it was fixable but do you have any idea why it would have done that is it the board that i brought
-
Hey Gazzdingo,
Could you please give further details as to what your issue is?
Is this just the PCB? Has it got OpenWRT on it?
Are you trying to "clean flash" (serial) it? If so, what UART device are you using?
Does the hornet-ub board power on at all? Do the lights come on when you just connect power to the board? Do they turn off once you plug in the serial connectors? If so, sounds like your wiring is wrong.
As you can see, supplying further details is beneficial. Please do so in the future.
Best Regards,
Sebkinne
clean flashed it via serial with this board http://www.ebay.com/itm/160765044944?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2648 i also had 3.3v in tx rx swaped over because hornet-ub had the pins on the over side and then the gnd in to gnd so every thing was pluged in correct and no lights are working what so ever
-
whent to flash a hornet ub board and i checked that every thing was pluged right like 5 time and all the lights turned off ?? please help
Which Modules do you prefer/recommend to have installed on the Pineapple (internal)?
in WiFi Pineapple Mark IV
Posted
hi boba fett, what I would do is go out and buy a USB hub, make sure it does not have any power feedback (http://forums.hak5.org/index.php?/topic/28781-usb-hub/). this way you can have all the modules you want on the pendive and sill be using the Wifi Adapter.
I recommend you use this one: Anker