Technoprenerd
-
Posts
32 -
Joined
-
Last visited
Posts posted by Technoprenerd
-
-
Hello Hak5 members,
I have got the following issue. I want to have an usb storage (the cruzer fit, 4gb) and an external wifi card (036h) via a usb hub.
This is not possible at the moment.
When I connect the usb mass storage through the hub all is well. Though if I connect the wifi card on the same hub as well, it 'kicks' out the usb mass storage.
Firmware version = 2.5.0
USB = Cruzer Fit 4 GB
Wifi Card = Alfa 036H
Also, all is correclty configured with the swap & storage in fstab.
Any Idea's on how to tackle this issue?
Thanks in advance,
Vlek007.
-
Hi, thanks for the reply.
Though I have successfully flashed it, so its allright ;)
[maybe possible to remove this topic... ?]
-
Hello Hak5 Members,
Recently I tried to change the mac adress at boot, which worked via macchanger in rc.local, though it blocked me out.
I tried the reset button, without any success (the wlan led & power led is working, though when I put in ethernet cable it gives me an ip adress of 172.16.42.204. However when I ping/nmap scan 172.16.42.1 it shows nothing/all filtered).
I can still see that the mac adress is changed at every boot, so the reset button wasn't working... :?
Next step I was trying to flash the device, though it didn't work for me (with usb uart, nothing shows up on the screen (though I have set up gnd/txd/rxd correctly)).
Plus I cannot connect to the WIFI interface.... only got an ip on ethernet.
Do you have any idea's to fix this?
Thanks in advance,
Vlek007.
-
Hey,
Just something I have experienced; It worked, though now I am locked out. What I did was paste the macchanger script into rc.local, before exit0 (with the comments out of it...). The mac has indeed changed, by looking at airodump.
The thing is I was unable to get an IP of it, so I thought of the reset button.
Now the wifi pineapple's SSID is pineapple xx:xx (last 4 of the mac adress), though the mac adress still is not the original.
Using firmware 2.5.0.
Thanks in advance,
Vlek007.
-
Blacklisting your MAC will not allow you to connect over wifi.
Are you connecting on http://172.16.42.1/pineapple
Yup, I am connecting to 172.16.42.1/pineapple .
Also I just tried it on another PC, other MAC. Still didn't work...
[EDIT]:
Got into it by SSH, edited the file /etc/rc.local. Removed the lines of SSLstrip & URLsnarf.
Now I am able to get into the web panel.
Just wanting to share it with other people who experience this problem.
Thanks for everything though, MR-Protocol.
-
Hello Hak5 members,
Hereby I request your help, I am blocked out of the web panel though I can ssh into the pineapple.
Pineapple Version 2.3.1, on MKIV.
I got Karma on autostart, SSLSTRIP and URLSNARF on autostart.I looked on ps aux, and nothing of the sslstrip & urlsnarf pid.
Also I blacklisted my MAC adress (maybe that is the reason ... :S).
Thanks for the help in advance,
Vlek007.
-
Hey, great work!
However, I have run into a problem upgrading; the pineapple isn't responding anymore, no ping, nothing :(.
Any help>?
Edit:
Successfully bricked my device! -.- Reset button doesn't work, now onto serial cable shopping.
-
This interactive chat it's awesome!! : ) I've installed the first time and have no problems but, randomly, i'm experiencing issues with log.html.. In detail when i'm connected in the chat and i click "Send" actually it doesn't send anything, in fact the log.html remains empty (it's not writable).In addition to that instead i've noticed that the file is readble, infact doing a "echo test > log.html" i get the "test" message refreshing the chat index page but actually i can't send any messages (i've tried different devices so it can't be a browser issue). I've also tried a chmod 777 log.html and entire directory of the chat but with same results.. Someone is experiencing my same issues? Or any idea to fix that? Thx in advance :)
ptrac3
Hey, I got this problem too. Only at mine its different; it doesn't work on Ipad/iphone/ipodtouch. The rest works.
-
Got an offtopic question (sorry though, tried so hard to figure it out on my own!)
My question is the following; By using macchanger -r wlan0/mon.wlan0 I can change the MAC adress. (First needing to put the interfaces down, ifconfig wlan0/mon.wlan0 down). However this doesn't work with KARMA on. Any idea's>?
And can I use a startup script that will change the MAC adress randomly on each startup>?
-
Thanks WM!
Though I get this error:
Warning: file_get_contents() [function.file-get-contents]: HTTP request failed! HTTP/1.1 404 NOT FOUND in /www/pineapple/modules_advanced.php on line 120 Warning: file_get_contents(http://wifipineapple.com/downloads.php?moduleList) [function.file-get-contents]: failed to open stream: Address family not supported by protocol in /www/pineapple/modules_advanced.php on line 120
Think the download link is down/wrong>?
-
Hi RebelCork,
I had an old install of beef PHP in an old backup. Here is the download link: Beef PHP. This version is 0.4.0 (I believe).
Use for educational purposes please.
Have fun.
-
This could also work (I think); Deal Extreme 2W Amplifier
-
Hi thestudent,
I already wondered about that too. I think you will need to edit the error.php page, at the last part where there is javascript saying go back 1 page. That needs to be than the real page.
Client --> Pineapple --> DNS on pineapple --> Redirect to real page after credential grabbing.
I don't know about putting the grabbed credentials into the real page and log the clients in automatically.
Ps: The module Keylogger is being worked on ATM by WhistleMaster. Maybe want to check that out, with the ettercap magic.
Edit:
The Javascript code to go to the real page will only work for one page. So we'll need some PHP code also, to distinguish between pages (I don't know about those codes). Probably with the HTTP_REFERER, and code something around that.
-
Usually i change the channel editing file /etc/config/wireless. I'm "happy" other people have the same issue..i feel not alone! :D
Thank you! Saved my day! Yeah, not alone indeed ^^
-
Hi,
I've the same problem. But can I change the card to channel 6 by using: iwconfig wlan0 channel 6. Or does it need to be mon.wlan0?
-
Hi,
I just got a lead acid 12V 7.2Ah. i will test it out this week.
Just a question though, i used a multimeter and it said its ouput was 12.83V. Is this still OK to use safely?
-
Hey,
Have this issue too. Even with the Nyan/rickrolling. My case; www.google.com gets displayed normally, and all the other pages with nyan/rickroll.
I think it is in the browser settings orso... :S
(Just might be helpfull)
-
Hey, I was kind of thinking in the same direction.
My idea is; to make a 'prank' page just like nyan cat/rickrolling. The only difference is that the targets need to have internet connection for an X amount of time, say 15 minutes. So after 15 minutes the internet connection is stopped, and displays the prank page. The idea for the prank page will be to have all their (segment by their WLAN IP) information such as urlsnarf, dnsspoof, etc. on the prank page and display it to them. Think of it like a warning message.
Will this work>?
Thanks in advance.
-
make sure it is not outputting more than 12 volts, use a multimeter.
the ac wall adapter is 12 volts.
having more amperage is not a problem because the pineapple will take only what it needs.
Thanks for the info!
-
Hey people,
Just a question; i am looking for a battery pack, and found one in my room. Its 12V with 7.5 Ah. Is this enough/too much for the pineapple?
Thanks in advance!
Edit: or does it need to output 2A?
-
I confirm this works with BackTrack 5 R1. (Thanks for that!!)
However, I just did this with BT5 R2 and it doesn't work properly. (the boot screen comes up, and after that it tells it can't find .....)
Any suggestions?
EDIT:
To be precise, I am getting an:
-----
BusyBux v1.13.3 (Ubuntu 1:1.13.1-1ubuntu11) built-in shell (ash)
Enter 'help' for a list of built-in commands.
(initramfs) Can not mount /dev/loop0 (/cdrom/backtrack/casper/filesystem.squashfs) on //filesystem.squashfs
-----
Btw, did this inside Vbox with plopboot and without vbox on my machine, same error. Any help?
-
-
-
Nice!!
Is this the sort of Assault Mod you want to be making as an extra for the Mk-iv>?
Q: Usb Working Untill Wifi Adapter Plugs In
in WiFi Pineapple Mark IV
Posted
Hey all,
The USB HUB is not powered.
Furthermore, I believe its an issue with the hub, because now I have the exact same problem as before, though its now not even working with the hub.
Here is the log: