Jump to content

webdirector

Active Members
 View Profile  See their activity

  • Posts

    121

  • Joined

  • Last visited

  • Days Won

    2

 Content Type 

Posts posted by webdirector

    Episode 1508

    in Hak5

    Posted

    Thanks MidnightSnake,

    But in the vdeo he is not talking about a pentesting tool but much more about zero drive tool or usb. and some other stuff.

    I know you could do that with a command like " dd if=/dev/zero of=/dev/sda bs=1M".

    But as said I was interested in the total tool he is talking about and wanted to have a look at it

    Thanks

    Episode 1508

    in Hak5

    Posted

    Hello,

    has anybody seen the script from "Art of exploitation " ?

    they say on their website " The script and how to create your own will be released shortly!"

    But nothing has changed since September.

    Just asking

    Nodogsplash Captive Portal

    in WiFi Pineapple Mark IV

    Posted · Edited by webdirector

    Hello,

    I am sure it has to do with the conf file of nodogsplash. I am pretty sure it has to do with the " EmptyRuleSetPolicy " I just have not figured it out yet

    I thought I had to use the " EmptyRuleSetPolicy preauthenticated-users passthrough " but that did not work

    Nodogsplash Captive Portal

    in WiFi Pineapple Mark IV

    Posted

    Hello,

    I flshed my Pinapple with 2.8.1

    If I go to 172.16.42.1:1471 I can see

    I changed the "/etc/config/uhttpd and look for "list listen_http 0.0.0.0:80" to list listen_http 0.0.0.0:81

    I rebooted

    I then installed nodogsplash as above.

    If I then go to 172.16.42.1:1471 I can see I see the status page as I am suppose to

    if I then SSH into pineapple and start nodogsplash

    If i Then try and go 172.16.42.1:1471 I get "a blank page with the messgae " Unable to connect "

    If I open another tab and type in "google.com" I get the standard splash page with the dog. If I press on the dog It says connecting to google but it never loads

    any ideas what is wrong ?

    Thanks

    Nodogsplash Captive Portal

    in WiFi Pineapple Mark IV

    Posted

    Hello,

    I installed Nodogsplash on 2.8.1 and I have the following issue.

    After reboot if I connect over wireless to the pineapple I can go to google.com no problems.

    When I then start nodogsplash via ssh and then call google.com I get the nodogsplash page. If I then press on the dog it should forward me to google.com . But I get the loading until it goes to the error pages and does not load.

    any Idea what the problem could be ?

    Thanks

    Best USB modem to use with Pineapple?

    in WiFi Pineapple Mark IV

    Posted

    Hello,

    I just got a cellular router.

    I see the router goes to the internet no issues.

    It is setup with DHCP and gives IP ranges from 192.168.0.XXX

    I then connected the ethernet cable to WAN port of the Pineapple.

    I did the commands :

    iptables -A FORWARD -i eth1 -o wlan0 -s 172.16.42.0 -m state --state NEW -j ACCEPTiptables -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPTiptables -t nat -A POSTROUTING -o eth1 -j MASQUERADE

    when i am in status page of the pineapple I see it got a WAN IP 192.168.0.100

    I alos see a public IP

    so to mee it looks as if all is owrking well.

    When I now connect over WLAN to the pineapple with my laptop. I see the pineapple status page but when I want to go to google it does not open

    any Idea what I am doing wrong ?

    Thanks

    Router with dsl modem

    in Questions

    Posted

    Hi, I am searching for the best possible router

    the requirements are:

    1- Should have the DSL modem build in. (VDSL if possible)

    2- If possible should have a local DNS server

    3- No need for WLAN ( I live in Germany we have steel concret floors, so WLAN router have issue, and I have WLAN access point on each floor so no need for WLAN on router)

    4- I just want the most up to date product so I do not have to worry about it for some time.

    5- A DMZ zone

    6- Not needed but nice to have, two WAN

    I was looking at the Zywall USG100, but it has no modem build in.

    I know of DD-WRT, that would be OK, But all the routers I seen are 2or 3 year old models.

    any suggestions

    Thanks

    GSM extension cable (20CM)

    in WiFi Pineapple Mark IV

    Posted

    Hello,

    I use a GSM router with my Pineapple. I would like to put the router in a case with the pineapple. For this I need a similar cable as the RP-SMA extension cable. It should be similar to the one offered in the hack shop for WLAN. But the difference is that on th side were the nut is it should have the small pin inside and on the other end it should not have the pin. So it is reverse ( for the small pin inside) of the SMA cable for WLAN.

    Does anybody know what they call this cable ? I been searching for it but could not find anything.

    Thanks for help

    3G - ZTE K3805-Z Issues

    in WiFi Pineapple Mark IV

    Posted

    In your first log I can see that it is connect as removable disk " Attached SCSI removable disk "

    I am no 3G expert but this to my understanding. This means it is mounting as disk and you do need modeswitch ( ...... my understanding)

    On what is the Pineapple connected ? I mean what type of power supply ? ( ... my experience is that 30% have power issues here)

    also read this :

    https://forum.openwrt.org/viewtopic.php?id=30002

    it helped me

    3G - ZTE K3805-Z Issues

    in WiFi Pineapple Mark IV

    Posted · Edited by webdirector

    this is my 3G script you may need to addapt it to your model, vendor a APN ...

    *12d1:1436*) echo "Huawei E173 detected. Attempting mode switch"

    uci delete network.wan2

    uci set network.wan2=interface

    uci set network.wan2.ifname=ppp0

    uci set network.wan2.proto=3g

    uci set network.wan2.service=umts

    uci set network.wan2.device=/dev/ttyUSB0

    uci set network.wan2.apn=internet.eplus.de

    uci set network.wan2.username=eplus

    uci set network.wan2.password=eplus

    uci set network.wan2.defaultroute=1

    uci commit network

    usb_modeswitch -v 12d1 -p 1436

    sleep 10; rmmod usbserial

    sleep 3; insmod usbserial vendor=0x12d1 product=0x1436

    sleep 5; /etc/init.d/firewall disable; /etc/init.d/firewall stop

    logger "3G: firewall stopped"

    iptables -t nat -A POSTROUTING -s 172.16.42.0/24 -o 3g-wan2 -j MASQUERADE

    iptables -A FORWARD -s 172.16.42.0/24 -o 3g-wan2 -j ACCEPT

    iptables -A FORWARD -d 172.16.42.0/24 -m state --state ESTABLISHED,RELATED -i 3g-wan2 -j ACCEPT

    ;;

    esac

    3G - ZTE K3805-Z Issues

    in WiFi Pineapple Mark IV

    Posted

    Hello,

    I am not using your 3G modem and I am not using Orange.

    But since you say when you are connecting wth the laptop you are using as login and password "orange" so this must be the login and password that you use.

    A problem that always happens with 3G is power. Make sure you are using a good power supply connected to mains. I am using a Huawei and mine only seems to work when I connect it to a HUB with 4A output. When I connected it direct to pineapple it would work from time to time only.

    I also noticed in you 3G script that you do not have the modeswitch, try adding this after uci commit network:

    usb_modeswitch -v 19d2 -p 1003

    and change sleep 2 line to sleep 10

    rgds

    wifi pineapple no connection

    in WiFi Pineapple Mark IV

    Posted · Edited by webdirector

    Hi Xneox,

    Please understand that people get anoyed when they get these very general questions. They are also thinking to themself " This guy can not even setup an internet connection, what is he doing with a pineapple ?" this is basic network stuff. Just do trouble shoting like you would with any PC ( ie can you ping, are your ip setup correct, make sure the cable is connected to the correct port and so on ).

    The above video is realy well done and it is very clear just make sure you do everthing correct.

    If you are doing this then give the output so people can analyse what you are doing wrong. Make a clear long description of your problem.

    I know we all have to start at some point. But in order to get help you will need to give a more specific issue description

    Typical beginner mistakes are not connecting to the pineapple POE port but to WAN port

    and trying to reach pineaplle under old URL and not the new ( 172.16.42.1:1471 )

    you say in first post " I have set int ip gate way addresse to my wifi card" The gateway is your router IP and not your WiFi card

    anyway good luck

    [Question] New Duckys faster ?

    in Classic USB Rubber Ducky

    Posted

    Coming back to my orginal subject :)

    My RED Ducky is stil lon standard Firmware. The new Duckys I alos did not flash them so I thought it was also still the same firmware. Can I see what firmware version I am running ?

    As for SD card. I actually take the SD out of the RED one and put it into the new one so it can not be the SD card.

    I guess something changed in hardware. I think it is just good for you to know.

×
×
  • Create New...