Gibbon

Damn it, if only the postage to AU wasnt so damn expensive!

Tried the whole thing on a different laptop and it works. Im also guessing ssl stuff on a Mk3 is done on the laptop side, rather than the Pineapple itself? Thanks for the help btw!

So, problem. When I plug in the pineapple. Wifi gets hardware disabled. (Even when I run the wp4 script.And Eth0 not automatically connecting) As soon as I plug into eth0, wifi goes down.... Advice? Thanks in advance.

What a dummy, I have the files, flashing now... doh! :)

FFS found my receipt for the Pineapple... Its a MK3! Where are the files I need?

Nope, doesnt work....

Thanks for that, Im having a few issues after the flashing, which went without a hitch, apart from some different params at the last stage: RedBoot> fconfig Run script at boot: true Boot script: .. fis load -l vmlinux.bin.l7 .. exec Enter script, terminate with empty line >> fis load -l vmlinux.bin.l7 >> exec >> Boot script timeout (1000ms resolution): 1 Use BOOTP for network configuration: false Gateway IP address: Local IP address: 192.168.0.1 Local IP address mask: 255.255.255.0 Default server IP address: 192.168.0.2 Console baud rate: 115200 GDB connection port: 9000 Force console for special debug messages: false Network debug at boot time: false Update RedBoot non-volatile configuration - continue (y/n) My Mk1 seems to be set to 192.168.0.1 as default. I couldnt change any of the values either, unless Im missing something here.... weird. Anyway, on restart the box briefly shows 192.168.0.1 to the world, and then is disappears again: From 192.168.0.2 icmp_seq=189 Destination Host Unreachable From 192.168.0.2 icmp_seq=190 Destination Host Unreachable 64 bytes from 192.168.0.1: icmp_req=191 ttl=64 time=1506 ms 64 bytes from 192.168.0.1: icmp_req=192 ttl=64 time=504 ms 64 bytes from 192.168.0.1: icmp_req=193 ttl=64 time=0.634 ms 64 bytes from 192.168.0.1: icmp_req=194 ttl=64 time=0.580 ms 64 bytes from 192.168.0.1: icmp_req=195 ttl=64 time=2.01 ms 64 bytes from 192.168.0.1: icmp_req=196 ttl=64 time=11.4 ms From 192.168.0.2 icmp_seq=229 Destination Host Unreachable From 192.168.0.2 icmp_seq=230 Destination Host Unreachable From 192.168.0.2 icmp_seq=231 Destination Host Unreachable And http://192.168.0.1:1471/ is obviously not available either. Anyone have any advice? Thanks G

Cant remember tbh. I ran netdiscover in the end and got two IP's from the box. 192.168.0.1 172.16.42.1 Now all I need are some instructions on configuring it again.

Hi all, I just pulled my old Mk 1 out of the drawer and fired her up. BUT I cant remember anything about her config. Whats the best way of finding out what IP she is using now? Is there a way of resetting back to 192.168.1.1 (default?) Thanks in advance. Gib

Thanks Darren, you are a legend, its now working! Thanks again, and yes, happy hacking!

Thanks, I tried that, here is the log: root@bt:~/Desktop# ./wp3.sh Input Pineapple Netmask [or ENTER for 255.255.255.0]: Input Pineapple Network [or ENTER for 172.16.42.0/24]: Input Interface between PC and Pineapple [or ENTER for eth0]: Input Interface between PC and Internet [or ENTER for wlan0]: Input Internet Gateway [or ENTER for 10.1.1.254]: Input IP Address of Host PC [or ENTER for 172.16.42.42]: Input IP Address of Pineapple [or ENTER for 172.16.42.1]: Pineapple connected to: eth0 Internet connection from: wlan0 Internet connection gateway: 10.1.1.254 Host Computer IP: 172.16.42.42 Pineapple IP: 172.16.42.1 Network: 172.16.42.0/24 Netmask: 255.255.255.0 IP Forwarding enabled. /proc/sys/net/ipv4/ip_forward set to 1 iptables chains and rules cleared IP Forwarding Enabled Default route removed Pineapple Default Gateway Configured PING 172.16.42.1 (172.16.42.1) 56(84) bytes of data. From 172.16.42.42 icmp_seq=2 Destination Host Unreachable From 172.16.42.42 icmp_seq=3 Destination Host Unreachable --- 172.16.42.1 ping statistics --- 3 packets transmitted, 0 received, +2 errors, 100% packet loss, time 2014ms , pipe 2 Browse to http://172.16.42.1/pineapple -- Happy Hacking! And ifconfig gives me: root@bt:~# ifconfig eth0 Link encap:Ethernet HWaddr 00:12:3f:dc:48:6a inet6 addr: fe80::212:3fff:fedc:486a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:16 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:2368 (2.3 KB) Interrupt:18 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:27 errors:0 dropped:0 overruns:0 frame:0 TX packets:27 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:3833 (3.8 KB) TX bytes:3833 (3.8 KB) wlan0 Link encap:Ethernet HWaddr 00:c0:ca:47:35:af inet addr:10.1.1.19 Bcast:10.1.1.255 Mask:255.255.255.0 inet6 addr: fe80::2c0:caff:fe47:35af/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:41 errors:0 dropped:0 overruns:0 frame:0 TX packets:24 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:6578 (6.5 KB) TX bytes:3377 (3.3 KB) Odd? Thanks in advance for the help, Im going to sleep for a few hours now, at 01:00. Hope Im not hi-jacking the thread, and this helps all of us.

Which OS are you running? As mentioned before trying both Windows XP and BT5r1 Are you setting up an internet (wlan0?) connection first before connecting the pineapple? Yes, wlan0 Are you using the wp3.sh script? Yes, tried it a few times, rebooting each time for a clean slate. I get the same error as the OP, "Destination Host Unreachable". Thanks

btw mine looks like this, not like the ones I see on the hak5 site? Did I get the right one? Was loose in the box too, no bubble wrap!? Thanks

I received mine in the post today (I'm all the way over in Australia!). But.. I have exactly the same issue as the OP. Have tried both BT5 r1 and XP with the instructions. I cant even ping the device. Have it setup through a hub, tried a cross-over cable normal directly etc etc. When I run a netdisccover -P on BT5 (passive detection), and power on the pineapple, I get a device in the list with an IP of 192.168.0.1. But I cannot ping that either... Have tried the suggestions above. My setup Pineapple --> hub or no hub --> Laptop --> Internal wireless adapter --> interwebs And I can access the interwebs on my lappy. Anyone? Many Thanks in advance, I was soooo looking forward to getting this :(