hak5superfan

Thank you very much this was what I was trying to say!

Mr-Protocol whats the path of the config file?

Thank you very much for your response Seb! I just want to know why back in version 1.9 I could change the Karma SSID and all the clients would detect the new SSID instantly, while in this new version the client remembers the old SSID and is hesitant to change? Thanks! BTW, Seb I just tried what you told me, I took one of my laptops and boot it up with an ubuntu live cd and when I search for networks it detects the NON-KARMA SSID instead of the new SSID. Before booting up the live cd, I turned on my pineapple, stated Karma and used the provided box to change the Karma SSID. I really don't know whats happening :S may it be a hardware issue?

Update: I re-flashed the pineapple 2 more times using firmware 2.0.1 and now the Karma SSID would not even change. I have been trying to change the Karma SSID using the provided box in the configuration menu and it just doesn't work at all. I have Karma activated all the time while trying to change the SSID. What do you guys suggest?

I am having a problem changing the Karma SSID through the GUI. When I start Karma, I try to change the SSI using the provided box under the configuration menu but this is not always successful. Changing the SSID using this method only works like 1 out of 6 times. I have also noticed that if I change the SSID sometimes it changes instantly, and other times it take like 20 minutes to finally change. I don't know whats going on. I just want to know if this is happening to someone else or just me. I also want to know if there is a more efficient way of changing the Karma SSID. I have tried this with 3 laptops and one iPhone. I am using a Mark III and Firmware version 2.0.1. Thank you very much guys! BTW, changing the Karma SSID used to work fine on Firmware version 1.9

Nope, I think Karma works in some way because my iPhone detects the open network I manually made for testing purposes even though it does not automatically connect to it, but the SSID before and after starting Karma is pineapple and I have not been able to change that. I did not test the Deauth part but I have noticed that Airmon-ng is enabled by default and there is no way of stopping it. I also had a weird glitch with the Reboot button. I clicked Restore to factory defaults and it said that changes would be made after Rebooting. I clicked then the Reboot button but the pineapple froze and never came back up. I had to unplug it a plug it back in. The last thing I have noticed is that nothing appears under Association Log even when I connect manually to the open network I have saved on my iPhone. This used to work for me on v1.9. I know Seb will fix this soon... hopefully. I flashed back to v1.9 to make it work properly again :) I'm using the AP51

I don't know about you guys but I liked better the v1.9 Karma configuration part where you had more control over Karma through the GUI.

telot have you tried v2.0 already?

Seb also nothing appears under Association Log, on 1.9 it was working fine for me!

Seb can you put back the old Karma Configuration Pleaseee!!!

Ok I dont know about you guys but now I cant change my Karma SSID through the GUI :'( Before activating Karma the SSID is pineapple, after activating Karma the SSID is also pineapple. I have tried changing the SSID before starting Karma using the Change Karma SSID box, it says that is has changed successfully but when I activate Karma, the SSID is still pineapple. I have also tried changing the SSID after starting Karma and it would not change.

Awesome mod csystem! I have a couple of question... First of all what's the RF shield for? Could I just take it off completely or is it necessary? Second, supposing the RF shield is necessary, wouldn't opening a hole for the heatsink affect the RF shield's purpose? Third, what's the best way to remove the RF shield? Last but not least, did you noticed an improvement of the pineapple's temperature? Is it running a lot cooler or just a little bit? Thank you very much!

Awesome! I love you man! So when is 2.0 coming out? Today, tomorrow, next week? Thanks! I also had a question... Would there be a place where we could check the current firmware version?

Does anyone know how many Amps @ 5v does the AP51 consumes?? Or does anyone know the power it take?? Because I am wondering if the 5v @ 500mA would be enough to power both the AP51 and the 5v fan in case you just want to use the USB to barrel connector.

I was thinking of opening a hole where the Alfa on top of the router and putting a 12v 40x40 mm fan I have connected to the barrel plug input. Is there a 5v source inside the device? Also i dont know what would be better... Putting the fan blowing cold air into the device or extracting the hot air from the device.

Awesome! Thank you very much! I searched and I think these might be perfect fit http://www.ebay.com/itm/Evercool-RHS-02-RAM-Chip-Memory-Heatsink-8-Pack-/230609396447?pt=LH_DefaultDomain_0&hash=item35b16422df :)

Hey csystem! How can I make or where can I buy a heat sink like the one you used in the picture? Thanks! Would this work? http://www.ebay.com/itm/Lot-2-23-x-23-x-10mm-HEATSINK-Stick-On-FREE-S-H-/390377805481?pt=LH_DefaultDomain_0&hash=item5ae45496a9

Thank you guys for checking! I was just asking because I wanted to make sure that this was normal and that my Pineapple was not broken or something. I think that still most of the "common" people would fall for the "freeinternet" SSID lol only if they knew. I was thinking about all the people that have their home networks configured so the SSID is not broadcasted as a security measure. After all I remember the A+ states as a security measure to disable SSID broadcasting. Well this people are easy prey because they must have their internet connection configured so it will connect even if the SSID is not broadasted making them connect to one of our pineapples if we have karma activated lol. Anywas thank you guys for the wonderful work you are doing and happy new years!

I think I may have found something here: http://technet.microsoft.com/en-us/library/cc730957.aspx Correct me if I'm wrong. "Because the wireless networks are explicitly marked as broadcast or non-broadcast, wireless clients running Windows Server 2008 R2, Windows Server 2008, Windows 7 and Windows Vista, send only probe requests for non-broadcast wireless networks." This would make the Wifi Pineapple useless when targeting a Windows 7, Vista or Server 2008 PC.

Ok awesome! Let me know your findings! Thanks!

Wow :S so you tested this with Windows 7 or Windows XP? I would test your problem with overheating on my unit as soon as I get a chance and post the results on your post. I would measure the temperatures every 20 mins. Thanks for replying! Does anyone else have the same problem???

Ok guys, yesterday I tested the wifi pineapple with a Windows XP SP2 Laptop I have and the results were the same. If I create an open network and set it up so it automatically connects when available, the computer does not detect the network just created. On the other hand, if I set it up to connect even if the network is not broadcasting its name then in that case it detects the test network and connects to it. Is this normal??? The option to connect to a network even if its not broadcasting its name is not a default option so how come do we expect other people to connect to the wifi pineapple??? Am I the only one with this issue??? Thanks!

I will try it tonight! Thanks telot!

Thank you for your reply telot! Yeah I have been trying all night and there is nothing I can do :S Today I will try with Windows XP Laptops to see if they would automatically connect to a saved open network. It would be nice if Darren, Mr-Protocol or Sebkinne could read this post and confirm the results we are getting. I just want to know if this is normal or my Wifi Pineapple is broken :S BTW, as I mentioned before, I have tested with an iPhone 4 and it would detect the open network saved but would not automatically connect. Please help!!! :) Thanks!

Hey Telot! Well I have tried everything and I am having the same problem. First of all, my current firmware version is 1.9 and 2 of my computers are Windows 7 Home Premium and my third computer is Windows 7 Ultimate. I have tested the Pineapple starting my computers from cold boot to no success. I have deleted all the saved networks and only added an open network called test. When I create this network manually, if I only choose the option "Connect automatically when this network is in range", the computer would not detect or connect to the test network. The only network I am able to see is the internet network created by the Pineapple when Karma is activated. On the other hand if I choose also the option "Connect even if the network is not broadcasting its name (SSID)", then the computer in that case detects the test network and automatically connects to it. This happens for all my 3 laptops. What I don't understand is how am I supposed to get other people to connect automatically to my Wifi Pineapple if they don't have the "Connect even if the network is not broadcasting its name (SSID)" option selected. This option is not selected automatically when you join an open network in an airport or coffee shop. How does Darren get other people to connect automatically to his Pineapple in his videos? Am I the only one having this problem? Thanks guys!