Marlboro Filter
-
Posts
67 -
Joined
-
Last visited
Posts posted by Marlboro Filter
-
-
I used 2 alfa usb wifi (nha & h) but i can't change the ssid name it always said "OpenWrt" even i reboot the device. But the 1st usb adapter ssid name can be change.
How can i change the 2nd one ?
Please advice
-
recently, i do opkg update & opkg install --dest usb reaver via ssh. but when i install the reaver module v.0.4 it said reaver "Not Installed".
and nothing happen when i tried to click the install button, it always give me reaver "Not Installed"
should i must symlink it ?
any suggestions ?
-
Thanks petertfm Tcpdump issue has been solved, but in wireshark window it doesn't capture anything
-
i still have no luck with this :( :( :( :( :( :( it's really strange it said, 'ash: tcpdump: not found'
-
i still have no luck :( :( :( :( :( with remote capturing. I already read all the wiki and google it.
-
Afaik, dump to usb mean offline capture right ?
Is it possible to do live traffic capture ?
-
i'm Wondering is it possible to do remote capture from pineapple using wireshark remotely ?
-
Is it possible using wifi booster on the pineapple like this one ? http://bit.ly/OjdUVw
-
Just flash new firmware 2.6.4, when i go to about page at pineapple control center it still show 2.6.3 is it normal ? I already check with md5 sum and it's the correct sum, i already flash couple of times also via web based and ssh console.please advice
-
is it possible to do "tango mode" with MK3 + MK4 ?
if yes, what kind of configurations to make it happen.
-
is it ok if i used isound 16000 mah battery pack ? for powering up pineapple + usb hub + alfa NHA ?
since i can power 5 device at the same time.please advice
-
If i want to upgrade with the latest firmware do i need re-download all the modules again into my thumbdrive ? Since the dev team Making our pineapple better and better it's a bit inconvenience if i must re-download all the modules but if this the only way it's ok with me :):):):) :)
-
WM, i just installed the latest sslstrip module from pineapple bar to usb, but it seems the page freeze at "installing SSLstrip....." progress.
i already wait almost 2 hours but the page still freeze, is it ok to refresh the page?
If i open it in a new tab it stated sslstrip already installed.
I used fw : 2.6.1 mk4
Please help thanks
-
Can't wait to see your pina-hackada
Post'em here :) :)
-
Thanks molotov, great mods !!!
-
Hi, What kind of dc cable to powered USB hub ? Can you share the link where you purchase it ?
-
Finally 2.0.0 landed....
just wondering, how does SSLstrip work ?
is it autostart when device turn on ? or is there any configuration to make it work ?
-
Hoooorrraaayy,.....Thank you WM for your effort
-
just another masterpiece from WM...
Great work...!!!
-
New version are now released as a module for the modules system appeared in the last 1.1.0 firmware. Old version is there only for MK3.
aarrrrghh i'm not notice it. seb already release the new firmware.
Thank youuu WM,once again great work
-
Hi WM, nice work !!!!!!
is there any link to the newest version (v1.3.2) ?
because at the first post it seems (v1.0b)
-
hi kevambert,
yes, the vid and pid is 19d2:fff1
still no luck, i still can't get my 3g dongle to work with MK4
-
Hi Guys,
I need some help with my MK4 + 3g modem (ZTE AC2726),
here's the configuration file
# ----------------------------------------------------------- # Configure /etc/ppp/options with hard-coded working settings # ----------------------------------------------------------- echo " logfile /dev/null noaccomp nopcomp nocrtscts lock maxfail 0" > /etc/ppp/options # -------------------------------------------------------------------------------------------------- # Check for known usb modem vendor and product IDs then switch 'em from storage to serial modem mode # -------------------------------------------------------------------------------------------------- echo "Searching for attached 3G Modems" logger "3G: Connection Script here, searching for modems" MODEM=$(lsusb | awk '{ print $6 }') echo $MODEM case "$MODEM" in *19d2:fff1*) echo "ZTE MF591 (T-Mobile) detected. Attempting mode switch" uci delete network.wan2 uci set network.wan2=interface uci set network.wan2.ifname=ppp0 uci set network.wan2.proto=evdo uci set network.wan2.service=umts uci set network.wan2.device=/dev/ttyUSB0 uci set network.wan2.apn=3gisp uci set network.wan2.username=3gisp uci set network.wan2.password=3gisp uci set network.wan2.defaultroute=1 uci commit network usb_modeswitch -v 19d2 -p fff1 -V 19d2 -P fff1 -M 5553424312345678c00000008000069f030000000000000000000000000000 -n 1 -s 20 sleep 10; rmmod usbserial sleep 3; insmod usbserial vendor=0x19d2 product=0xfff1 sleep 5; /etc/init.d/firewall disable; /etc/init.d/firewall stop logger "3G: firewall stopped" iptables -t nat -A POSTROUTING -s 172.16.42.0/24 -o 3g-wan2 -j MASQUERADE iptables -A FORWARD -s 172.16.42.0/24 -o 3g-wan2 -j ACCEPT iptables -A FORWARD -d 172.16.42.0/24 -m state --state ESTABLISHED,RELATED -i 3g-wan2 -j ACCEPT3G dongle
Bus 001 Device 003: ID 19d2:fff1 ZTE WCDMA Technologies MSM
When i tried to run 3g.sh the result was
root@Pineapple:/www/pineapple# ./3g.sh Searching for attached 3G Modems 1d6b:0002 19d2:fff1 ZTE MF591 (T-Mobile) detected. Attempting mode switch Looking for target devices ... Found devices in target mode or class (1) Looking for default devices ... Found devices in default mode, class or configuration (1) Accessing device 005 on bus 001 ... Getting the current device configuration ... OK, got current device configuration (1) Using first interface: 0x00 Using endpoints 0x02 (out) and 0x82 (in) Not a storage device, skipping SCSI inquiry USB description data (for identification) ------------------------- Manufacturer: ZTE, Incorporated Product: ZTE CDMA Tech Serial No.: not provided ------------------------- Looking for active driver ... OK, driver found ("usbserial_generic") OK, driver "usbserial_generic" detached Setting up communication with interface 0 Using endpoint 0x02 for message sending ... Trying to send message 1 to endpoint 0x02 ... OK, message successfully sent Reading the response to message 1 (CSW) ... Response reading got error -145 Device is gone, skipping any further commands Checking for mode switch (max. 20 times, once per second) ... Searching for target devices ... Searching for target devices ... Searching for target devices ... Searching for target devices ... Searching for target devices ... Searching for target devices ... Searching for target devices ... Searching for target devices ... Searching for target devices ... Searching for target devices ... Searching for target devices ... Searching for target devices ... Searching for target devices ... Searching for target devices ... Searching for target devices ... Searching for target devices ... Searching for target devices ... Searching for target devices ... Searching for target devices ... Searching for target devices ... No new devices in target mode or class found Mode switch has failed. Bye.here's my evdo.chat
# This is a simple chat script based off of the one provided by Sierra Wireless # for CDMA connections. It should work for both Sprint and Verizon networks. ABORT BUSY ABORT 'NO CARRIER' ABORT ERROR ABORT 'NO DIAL TONE' ABORT 'NO ANSWER' ABORT DELAYED REPORT CONNECT TIMEOUT 10 '' AT OK ATZ SAY 'Calling CDMA/EVDO' TIMEOUT 30 OK ATDT#777 CONNECT ''
here's my 3g.chat
ABORT BUSY ABORT 'NO CARRIER' ABORT ERROR REPORT CONNECT TIMEOUT 10 "" "AT&F" OK "ATE1" OK 'AT+CGDCONT=1,"IP","$USE_APN"' SAY "Calling UMTS/GPRS" TIMEOUT 30 OK "ATD*99***1#" CONNECT ' '
The Log message was
Jan 1 00:25:01 Pineapple cron.info crond[1098]: crond: USER root pid 4372 cmd /www/pineapple/cleanup.sh Jan 1 00:25:01 Pineapple cron.info crond[1098]: crond: USER root pid 4373 cmd /www/pineapple/3g-keepalive.sh Jan 1 00:25:01 Pineapple user.notice root: CLEANUP: Clean-up Script Executed Jan 1 00:25:01 Pineapple user.notice root: 3G: Keep-Alive Script Executed Jan 1 00:25:01 Pineapple user.notice root: 3G: Interface 3g-wan2 seems down. Attempting 3g connect script again Jan 1 00:25:01 Pineapple user.notice root: CLEANUP: Karma log looking good Jan 1 00:25:01 Pineapple user.notice root: 3G: Connection Script here, searching for modems Jan 1 00:25:01 Pineapple user.notice root: CLEANUP: memory looking good Jan 1 00:25:02 Pineapple kern.info kernel: [ 1502.890000] generic ttyUSB0: generic converter now disconnected from ttyUSB0 Jan 1 00:25:02 Pineapple kern.info kernel: [ 1502.890000] usbserial_generic 1-1:1.0: device disconnected Jan 1 00:25:36 Pineapple kern.info kernel: [ 1536.070000] usbcore: deregistering interface driver usbserial_generic Jan 1 00:25:36 Pineapple kern.info kernel: [ 1536.080000] generic ttyUSB4: generic converter now disconnected from ttyUSB4 Jan 1 00:25:36 Pineapple kern.info kernel: [ 1536.080000] usbserial_generic 1-1:1.4: device disconnected Jan 1 00:25:36 Pineapple kern.info kernel: [ 1536.090000] generic ttyUSB3: generic converter now disconnected from ttyUSB3 Jan 1 00:25:36 Pineapple kern.info kernel: [ 1536.100000] usbserial_generic 1-1:1.3: device disconnected Jan 1 00:25:36 Pineapple kern.info kernel: [ 1536.100000] generic ttyUSB2: generic converter now disconnected from ttyUSB2 Jan 1 00:25:36 Pineapple kern.info kernel: [ 1536.110000] usbserial_generic 1-1:1.2: device disconnected Jan 1 00:25:36 Pineapple kern.info kernel: [ 1536.110000] generic ttyUSB1: generic converter now disconnected from ttyUSB1 Jan 1 00:25:36 Pineapple kern.info kernel: [ 1536.120000] usbserial_generic 1-1:1.1: device disconnected Jan 1 00:25:36 Pineapple kern.info kernel: [ 1536.130000] USB Serial deregistering driver generic Jan 1 00:25:36 Pineapple kern.info kernel: [ 1536.130000] usbcore: deregistering interface driver usbserial Jan 1 00:25:39 Pineapple kern.info kernel: [ 1539.230000] usbcore: registered new interface driver usbserial Jan 1 00:25:39 Pineapple kern.info kernel: [ 1539.240000] USB Serial support registered for generic Jan 1 00:25:39 Pineapple kern.info kernel: [ 1539.240000] usbserial_generic 1-1:1.0: generic converter detected Jan 1 00:25:39 Pineapple kern.info kernel: [ 1539.250000] usb 1-1: generic converter now attached to ttyUSB0 Jan 1 00:25:39 Pineapple kern.info kernel: [ 1539.250000] usbserial_generic 1-1:1.1: generic converter detected Jan 1 00:25:39 Pineapple kern.info kernel: [ 1539.260000] usb 1-1: generic converter now attached to ttyUSB1 Jan 1 00:25:39 Pineapple kern.info kernel: [ 1539.260000] usbserial_generic 1-1:1.2: generic converter detected Jan 1 00:25:39 Pineapple kern.info kernel: [ 1539.270000] usb 1-1: generic converter now attached to ttyUSB2 Jan 1 00:25:39 Pineapple kern.info kernel: [ 1539.280000] usbserial_generic 1-1:1.3: generic converter detected Jan 1 00:25:39 Pineapple kern.info kernel: [ 1539.280000] usb 1-1: generic converter now attached to ttyUSB3 Jan 1 00:25:39 Pineapple kern.info kernel: [ 1539.290000] usbserial_generic 1-1:1.4: generic converter detected Jan 1 00:25:44 Pineapple user.notice root: 3G: firewall stopped Jan 1 00:27:11 Pineapple user.notice root: 3G: Connection Script here, searching for modems Jan 1 00:27:14 Pineapple kern.info kernel: [ 1634.250000] generic ttyUSB0: generic converter now disconnected from ttyUSB0 Jan 1 00:27:14 Pineapple kern.info kernel: [ 1634.260000] usbserial_generic 1-1:1.0: device disconnected Jan 1 00:27:47 Pineapple kern.info kernel: [ 1667.400000] usbcore: deregistering interface driver usbserial_generic Jan 1 00:27:47 Pineapple kern.info kernel: [ 1667.400000] generic ttyUSB4: generic converter now disconnected from ttyUSB4 Jan 1 00:27:47 Pineapple kern.info kernel: [ 1667.410000] usbserial_generic 1-1:1.4: device disconnected Jan 1 00:27:47 Pineapple kern.info kernel: [ 1667.410000] generic ttyUSB3: generic converter now disconnected from ttyUSB3 Jan 1 00:27:47 Pineapple kern.info kernel: [ 1667.420000] usbserial_generic 1-1:1.3: device disconnected Jan 1 00:27:47 Pineapple kern.info kernel: [ 1667.430000] generic ttyUSB2: generic converter now disconnected from ttyUSB2 Jan 1 00:27:47 Pineapple kern.info kernel: [ 1667.430000] usbserial_generic 1-1:1.2: device disconnected Jan 1 00:27:47 Pineapple kern.info kernel: [ 1667.440000] generic ttyUSB1: generic converter now disconnected from ttyUSB1 Jan 1 00:27:47 Pineapple kern.info kernel: [ 1667.450000] usbserial_generic 1-1:1.1: device disconnected Jan 1 00:27:47 Pineapple kern.info kernel: [ 1667.450000] USB Serial deregistering driver generic Jan 1 00:27:47 Pineapple kern.info kernel: [ 1667.460000] usbcore: deregistering interface driver usbserial Jan 1 00:27:50 Pineapple kern.info kernel: [ 1670.550000] usbcore: registered new interface driver usbserial Jan 1 00:27:50 Pineapple kern.info kernel: [ 1670.550000] USB Serial support registered for generic Jan 1 00:27:50 Pineapple kern.info kernel: [ 1670.550000] usbserial_generic 1-1:1.0: generic converter detected Jan 1 00:27:50 Pineapple kern.info kernel: [ 1670.560000] usb 1-1: generic converter now attached to ttyUSB0 Jan 1 00:27:50 Pineapple kern.info kernel: [ 1670.570000] usbserial_generic 1-1:1.1: generic converter detected Jan 1 00:27:50 Pineapple kern.info kernel: [ 1670.570000] usb 1-1: generic converter now attached to ttyUSB1 Jan 1 00:27:50 Pineapple kern.info kernel: [ 1670.580000] usbserial_generic 1-1:1.2: generic converter detected Jan 1 00:27:50 Pineapple kern.info kernel: [ 1670.580000] usb 1-1: generic converter now attached to ttyUSB2 Jan 1 00:27:50 Pineapple kern.info kernel: [ 1670.590000] usbserial_generic 1-1:1.3: generic converter detected Jan 1 00:27:50 Pineapple kern.info kernel: [ 1670.600000] usb 1-1: generic converter now attached to ttyUSB3 Jan 1 00:27:50 Pineapple kern.info kernel: [ 1670.600000] usbserial_generic 1-1:1.4: generic converter detected Jan 1 00:27:55 Pineapple user.notice root: 3G: firewall stopped
please help me to make my 3G dongle to work with mk4
Thanks guys
-
Hi...
i want to purchase a 3G modem (ZTE MF622) is it supported with MK4 ?
I just want to make sure i don't buy the wrong 3g modem ?
here's the specification :
*Auto installation, no CDROM required.(The software is in modem memory)
* HSDPA/UMTS 2100MHz GSM/GPRS/EDGE 900/1800/1900MHz
* Support Speed 7.2Mbps.
* Internal Antenna + Additonal external antenna possible
* Slimmest and Smallest: Dimensions: 86 x 44.3 x 10 mm
* Stylish and modern design, Weight: 40 grams Only
* Less hot, not as huawei E220 very hot after long use.
THanks
Video: A Working VMware Module for the Pineapple
in WiFi Pineapple Mark IV
Posted · Edited by Marlboro Filter
Holly s**t unbelievable !!!!
Great job !!!
Let us know how it works