Jump to content

ibrokeit

Active Members
  • Posts

    13
  • Joined

  • Last visited

About ibrokeit

  • Birthday 12/06/1986

Profile Information

  • Gender
    Male
  • Location
    Texas

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

ibrokeit's Achievements

Newbie

Newbie (1/14)

  1. When you change the ip of one to 172.16.42.2, you are "renaming" the router. That becomes the routers address on the network, therefore, the ui for that router will be at that ip.
  2. Yes. It's a painless process. I would recommend the adapter from the hack shop. I've flashed 2 with it. Took all of 20 minutes to flash both.
  3. Don't be too critical here, this is my first go and I'm still pretty new. - Pelican 1150 - 2x pineapple. (bought the boards from data-alliance and flashed them myself) - 8gb sandisk cruiser - anker usb hub - Alfa NHA - iSound 16000mah usb battery - Huawei E368 3g modem PIne#1 is connected to the internet via alfa or 3g with the internal radio free to deauth. Pine #2 running Karma. This IS working in tango mode, however the 3g modem is still a little flaky. When I use the Alfa to connect to an existing network, it's pretty reliable. Most of what I've done here was with the help of tutorials here in the forums. Again, This is my first go and a trial run. When I get everything positioned and working how I want it, I'm going to clean it up and make it a little more user friendly.
  4. The ability to adjust the tx power of an attached wifi adapter.
  5. How difficult would it be to have multiple SSH banners randomized like when starting up Metasploit?
  6. Did you make any progress with the 4g wimax? If i can't get my at&t lined out, I'm going to switch to this.
  7. Negative. Tried every configuration with and without username and pw. with a reboot after every change. i get the same log output every time.
  8. How I got here. I found a similar Novatel configuration in the 3g script and switched out the pid and vid I got from lsusb. Then tried changing the service and apn. My most recent attempt using these settings. The log after reboot:
  9. I'm on the current firmware. Still no USB love...
  10. I've been lurking here for a few years now and this is the first problem I've run in to I couldn't fix myself by searching. I'm trying to get my Novatel mifi5792 to tether with my MKIV. In searching I've found "how" to add a 3g modem, however, I don't have the right configuration settings. VId : pid 1410:b009 Novatel Wireless *1410:b009*) echo "Novatel Mifi5792 detected. Attempting mode switch" uci delete network.wan2 uci set network.wan2=interface uci set network.wan2.ifname=ppp0 uci set network.wan2.proto=3g uci set network.wan2.service= #what goes here for AT&T? I've tried umts, cdma... uci set network.wan2.device=/dev/ttyUSB0 uci set network.wan2.apn= # same question: pta, wap.cingular. etc... uci set network.wan2.username= #blank uci set network.wan2.password= #blank uci set network.wan2.defaultroute=1 uci commit network usb_modeswitch -v 1410 -p b009 -V 1410 -P b009 -M 5553424312345678000000000000061b000000020000000000000000000000 -n 1 -s 20 #unsure if this line is correct. and what is that long number? sleep 10; rmmod usbserial sleep 3; insmod usbserial vendor=0x1410 product=0xb009 #unsure of this line sleep 5; /etc/init.d/firewall disable; /etc/init.d/firewall stop logger "3G: firewall stopped" iptables -t nat -A POSTROUTING -s 172.16.42.0/24 -o 3g-wan2 -j MASQUERADE iptables -A FORWARD -s 172.16.42.0/24 -o 3g-wan2 -j ACCEPT iptables -A FORWARD -d 172.16.42.0/24 -m state --state ESTABLISHED,RELATED -i 3g-wan2 -j ACCEPT I'm not looking to be spoon fed. I'd be satisfied with someone just pointing me in the right direction. At this point, I'm just throwing rocks in the dark.
  11. Has anyone done anything with this? I have the liberate and am having issues getting it to work.
  12. I've been tinkering around with this for about 6 hours trying to learn how to do this on my own, but it's not happening. I've successfully flashed the pineapple, but when I get to the step where I need to ping google, I get nothing. could someone give me some pointers?
×
×
  • Create New...