Jump to content

zibri

Active Members
  • Posts

    45
  • Joined

  • Last visited

Everything posted by zibri

  1. Checkout this. https://www.cnx-software.com/2017/08/18/14-orange-pi-r1-allwinner-h2-board-comes-with-two-ethernet-ports-256-mb-ram/amp/ Not Dual GigaEth, but still not bad at all!
  2. I am disappointed as well about the specs. Too poor, compared to the existing cheap ARM boards on the market (i.e. RPi Zero, NanoPi, OrangePi R1)...
  3. Don't think rubberducky HW is opensource... Check this https://www.indiegogo.com/projects/malduino-badusb-arduino-usb Which indeed is opensource and openhardware ;]
  4. Cool! Nice to hear man! :) Any ETA on when I can place an order?
  5. From what I can see Edutech is still closed. Any other option where to buy a Pineapple TETRA in europe?
  6. for the 802.1x EAP attack u can use hostapd-wpe ported by acrylicwifi company. I am already using on pineapple and other openwrt hw ;)
  7. i know, i was just wondering whether the bash script was takinf care of formatting USB partitions or not ;) but i looked at the script and figured it out. :)
  8. i know, i was just wondering whether the bash script was takinf care of formatting USB partitions or not ;) but i looked at the script and figured it out. :)
  9. Having said that I am on phone... this script is for SD or USB? ( talking about NANO of course ;))
  10. @Newbies please DO NOT RUIN THIS THREAD! Thanks. Use google.
  11. Yeah, Atheros chipsets are really cool to play with (since the good old FONERA back ten years ago :D ) As I told to Sebkinne, ZSUN is really nice toy. And I would even consider a legit HAk5 version of it (since pushing pineapple's FW in it violates hak5's EULA) ;] Sad that, you will see is not hard to push it into the ZSUN. :) At this point, I will put on hold my NANO and continue to use Nethunter. However, I hope u r right and is a kernel issue. P.S. Anyone in Openwrt community reported similar errors? Maybe they already have a defect opened in the bugtracker.
  12. I started to install everything again on my SD card (brand new, class10) and already getting this in dmesg.... I honestly hope someone from Hak5 will look at these SD issues. Because I don't see any reason to buy the NANO without the ability to use the SD slot... At this point, if this issue will not be fixed.... I will sell the NANO and focus on other (more reliable HW)...see ZSUN, NanoPi NEO, etc. [ 14.420000] ath: Country alpha2 being used: US [ 14.420000] ath: Regpair used: 0x3a [ 14.450000] ieee80211 phy1: Atheros AR9271 Rev:1 [ 14.530000] sd 0:0:0:0: [sda] 31291392 512-byte logical blocks: (16.0 GB/14.9 GiB) [ 14.570000] sd 0:0:0:0: [sda] Write Protect is off [ 14.570000] sd 0:0:0:0: [sda] Mode Sense: 21 00 00 00 [ 14.570000] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 14.610000] sda: sda1 sda2 [ 14.620000] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 18.030000] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities [ 18.040000] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities [ 18.180000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 23.850000] Adding 1004024k swap on /dev/sdcard/sd2. Priority:-1 extents:1 across:1004024k [ 24.060000] random: nonblocking pool is initialized [ 24.070000] device eth0 entered promiscuous mode [ 26.410000] eth0: link up (100Mbps/Full duplex) [ 26.410000] br-lan: port 1(eth0) entered forwarding state [ 26.420000] br-lan: port 1(eth0) entered forwarding state [ 28.420000] br-lan: port 1(eth0) entered forwarding state [ 29.670000] device wlan0 entered promiscuous mode [ 29.830000] device wlan0-1 entered promiscuous mode [ 29.830000] br-lan: port 3(wlan0-1) entered forwarding state [ 29.840000] br-lan: port 3(wlan0-1) entered forwarding state [ 30.080000] br-lan: port 2(wlan0) entered forwarding state [ 30.080000] br-lan: port 2(wlan0) entered forwarding state [ 30.540000] br-lan: port 3(wlan0-1) entered disabled state [ 32.080000] br-lan: port 2(wlan0) entered forwarding state [ 32.340000] br-lan: port 3(wlan0-1) entered forwarding state [ 32.340000] br-lan: port 3(wlan0-1) entered forwarding state [ 34.340000] br-lan: port 3(wlan0-1) entered forwarding state [ 278.490000] ------------[ cut here ]------------ [ 278.490000] WARNING: CPU: 0 PID: 1888 at fs/inode.c:339 inc_nlink+0x50/0x74() [ 278.500000] Modules linked in: pppoe ppp_async option iptable_nat usb_wwan sierra_net rndis_host qmi_wwan pppox ppp_generic pl2303 nf_nat_ipv4 nf_conntrack_ipv4 iptable_raw iptable_mangle iptable_filter ipt_REJECT ipt_MASQUERADE ipt_ECN ip_tables cdc_ether ax88179_178a asix xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_id xt_hl xt_ecn xt_dscp xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_NETMAP xt_LOG xt_HL xt_DSCP xt_CT xt_CLASSIFY x_tables usbserial usbnet ums_usbat ums_sddr55 ums_sddr09 ums_karma ums_jumpshot ums_isd200 ums_freecom ums_datafab ums_cypress ums_alauda slhc nf_reject_ipv4 nf_nat_masquerade_ipv4 nf_nat_ftp nf_nat nf_log_ipv4 nf_log_common nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack_ftp nf_conntrack crc_itu_t cdc_wdm cdc_acm sg nfsv3 nfs rtl8192cu rtl_usb rtl8192c_common rtlwifi rtl8187 rt2800usb rt2800lib rt2x00usb rt2x00lib crc_ccitt tun vfat fat lockd sunrpc grace ath9k_htc ath9k ath9k_common ath9k_hw ath mac80211 cfg80211 compat nls_utf8 nls_iso8859_1 nls_cp437 eeprom_93cx6 arc4 crypto_blkcipher usb_storage uhci_hcd ohci_platform ohci_hcd ehci_platform ehci_hcd sd_mod scsi_mod gpio_button_hotplug ext4 jbd2 mbcache usbcore nls_base usb_common crc16 mii aead crypto_hash [ 278.610000] CPU: 0 PID: 1888 Comm: rm Not tainted 3.18.36 #40 [ 278.620000] Stack : 00000000 00000000 00000000 00000000 803b4292 00000031 00000000 80111e34 [ 278.620000] 00000001 80d6e198 802ffa20 803565e3 00000760 803b34d0 82bc6de0 80d6e198 [ 278.620000] 8345fa80 00000031 83c233b8 800a35b4 00000003 80080410 00000153 80d6e198 [ 278.620000] 80303050 82945b54 00000000 00000000 00000000 00000000 00000000 00000000 [ 278.620000] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 278.620000] ... [ 278.650000] Call Trace: [ 278.650000] [<80071038>] show_stack+0x50/0x84 [ 278.660000] [<80080518>] warn_slowpath_common+0x84/0xb4 [ 278.660000] [<800805d0>] warn_slowpath_null+0x18/0x24 [ 278.670000] [<80111e34>] inc_nlink+0x50/0x74 [ 278.670000] [<801517dc>] jffs2_mkdir+0x2d8/0x35c [ 278.680000] [<80105038>] vfs_mkdir+0x8c/0xec [ 278.680000] [<801662dc>] ovl_create_real+0xc4/0x134 [ 278.690000] [<801689c0>] ovl_copy_up_one+0x274/0x5ac [ 278.690000] [<80168da8>] ovl_copy_up+0xb0/0xfc [ 278.700000] [<80166c8c>] ovl_do_remove+0x84/0x3dc [ 278.700000] [<8010540c>] vfs_unlink+0xcc/0x190 [ 278.710000] [<80109780>] do_unlinkat+0x100/0x20c [ 278.710000] [<80062b5c>] handle_sys+0x11c/0x140 [ 278.710000] [ 278.720000] ---[ end trace 350250660c6252b7 ]--- [ 278.730000] ------------[ cut here ]------------ [ 278.730000] WARNING: CPU: 0 PID: 1888 at fs/inode.c:339 inc_nlink+0x50/0x74() [ 278.740000] Modules linked in: pppoe ppp_async option iptable_nat usb_wwan sierra_net rndis_host qmi_wwan pppox ppp_generic pl2303 nf_nat_ipv4 nf_conntrack_ipv4 iptable_raw iptable_mangle iptable_filter ipt_REJECT ipt_MASQUERADE ipt_ECN ip_tables cdc_ether ax88179_178a asix xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_id xt_hl xt_ecn xt_dscp xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_NETMAP xt_LOG xt_HL xt_DSCP xt_CT xt_CLASSIFY x_tables usbserial usbnet ums_usbat ums_sddr55 ums_sddr09 ums_karma ums_jumpshot ums_isd200 ums_freecom ums_datafab ums_cypress ums_alauda slhc nf_reject_ipv4 nf_nat_masquerade_ipv4 nf_nat_ftp nf_nat nf_log_ipv4 nf_log_common nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack_ftp nf_conntrack crc_itu_t cdc_wdm cdc_acm sg nfsv3 nfs rtl8192cu rtl_usb rtl8192c_common rtlwifi rtl8187 rt2800usb rt2800lib rt2x00usb rt2x00lib crc_ccitt tun vfat fat lockd sunrpc grace ath9k_htc ath9k ath9k_common ath9k_hw ath mac80211 cfg80211 compat nls_utf8 nls_iso8859_1 nls_cp437 eeprom_93cx6 arc4 crypto_blkcipher usb_storage uhci_hcd ohci_platform ohci_hcd ehci_platform ehci_hcd sd_mod scsi_mod gpio_button_hotplug ext4 jbd2 mbcache usbcore nls_base usb_common crc16 mii aead crypto_hash [ 278.850000] CPU: 0 PID: 1888 Comm: rm Tainted: G W 3.18.36 #40 [ 278.860000] Stack : 00000000 00000000 00000000 00000000 803b4292 0000003e 00000000 80111e34 [ 278.860000] 00000001 80d0bf68 802ffa20 803565e3 00000760 803b34d0 82bc6de0 80d0bf68 [ 278.860000] 8345fa80 00000031 ffffffef 800a35b4 00000003 8008039c 00000153 80d0bf68 [ 278.860000] 80303050 82945c34 00000000 00000000 00000000 00000000 00000000 00000000 [ 278.860000] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 278.860000] ... [ 278.890000] Call Trace: [ 278.890000] [<80071038>] show_stack+0x50/0x84 [ 278.900000] [<80080518>] warn_slowpath_common+0x84/0xb4 [ 278.900000] [<800805d0>] warn_slowpath_null+0x18/0x24 [ 278.910000] [<80111e34>] inc_nlink+0x50/0x74 [ 278.910000] [<801517dc>] jffs2_mkdir+0x2d8/0x35c [ 278.920000] [<80105038>] vfs_mkdir+0x8c/0xec [ 278.920000] [<801662dc>] ovl_create_real+0xc4/0x134 [ 278.930000] [<8016647c>] ovl_check_empty_and_clear+0x130/0x240 [ 278.930000] [<80166dd8>] ovl_do_remove+0x1d0/0x3dc [ 278.940000] [<8010905c>] vfs_rmdir+0x84/0x11c [ 278.940000] [<801095f8>] do_rmdir+0xec/0x174 [ 278.950000] [<80062b5c>] handle_sys+0x11c/0x140 [ 278.950000] [ 278.950000] ---[ end trace 350250660c6252b8 ]--- [ 278.960000] ------------[ cut here ]------------ [ 278.960000] WARNING: CPU: 0 PID: 1888 at fs/inode.c:282 drop_nlink+0x28/0x64() [ 278.970000] Modules linked in: pppoe ppp_async option iptable_nat usb_wwan sierra_net rndis_host qmi_wwan pppox ppp_generic pl2303 nf_nat_ipv4 nf_conntrack_ipv4 iptable_raw iptable_mangle iptable_filter ipt_REJECT ipt_MASQUERADE ipt_ECN ip_tables cdc_ether ax88179_178a asix xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_id xt_hl xt_ecn xt_dscp xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_NETMAP xt_LOG xt_HL xt_DSCP xt_CT xt_CLASSIFY x_tables usbserial usbnet ums_usbat ums_sddr55 ums_sddr09 ums_karma ums_jumpshot ums_isd200 ums_freecom ums_datafab ums_cypress ums_alauda slhc nf_reject_ipv4 nf_nat_masquerade_ipv4 nf_nat_ftp nf_nat nf_log_ipv4 nf_log_common nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack_ftp nf_conntrack crc_itu_t cdc_wdm cdc_acm sg nfsv3 nfs rtl8192cu rtl_usb rtl8192c_common rtlwifi rtl8187 rt2800usb rt2800lib rt2x00usb rt2x00lib crc_ccitt tun vfat fat lockd sunrpc grace ath9k_htc ath9k ath9k_common ath9k_hw ath mac80211 cfg80211 compat nls_utf8 nls_iso8859_1 nls_cp437 eeprom_93cx6 arc4 crypto_blkcipher usb_storage uhci_hcd ohci_platform ohci_hcd ehci_platform ehci_hcd sd_mod scsi_mod gpio_button_hotplug ext4 jbd2 mbcache usbcore nls_base usb_common crc16 mii aead crypto_hash [ 279.080000] CPU: 0 PID: 1888 Comm: rm Tainted: G W 3.18.36 #40 [ 279.090000] Stack : 00000000 00000000 00000000 00000000 803b4292 0000003e 00000000 80112c2c [ 279.090000] 00000001 83b05800 802ffa20 803565e3 00000760 803b34d0 82bc6de0 83b05800 [ 279.090000] 80d0bf68 83c233b8 00000000 800a35b4 00000003 8008039c 0000011a 83b05800 [ 279.090000] 80303050 82945cec 00000000 00000000 00000000 00000000 00000000 00000000 [ 279.090000] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 279.090000] ... [ 279.120000] Call Trace: [ 279.130000] [<80071038>] show_stack+0x50/0x84 [ 279.130000] [<80080518>] warn_slowpath_common+0x84/0xb4 [ 279.140000] [<800805d0>] warn_slowpath_null+0x18/0x24 [ 279.140000] [<80112c2c>] drop_nlink+0x28/0x64 [ 279.150000] [<80150d48>] jffs2_rmdir+0xa0/0xc8 [ 279.150000] [<8010905c>] vfs_rmdir+0x84/0x11c [ 279.150000] [<80166138>] ovl_cleanup+0x48/0x9c [ 279.160000] [<80166f60>] ovl_do_remove+0x358/0x3dc [ 279.160000] [<8010905c>] vfs_rmdir+0x84/0x11c [ 279.170000] [<801095f8>] do_rmdir+0xec/0x174 [ 279.170000] [<80062b5c>] handle_sys+0x11c/0x140 [ 279.180000] [ 279.180000] ---[ end trace 350250660c6252b9 ]--- [ 279.190000] ------------[ cut here ]------------ [ 279.190000] WARNING: CPU: 0 PID: 1888 at fs/inode.c:282 drop_nlink+0x28/0x64() [ 279.200000] Modules linked in: pppoe ppp_async option iptable_nat usb_wwan sierra_net rndis_host qmi_wwan pppox ppp_generic pl2303 nf_nat_ipv4 nf_conntrack_ipv4 iptable_raw iptable_mangle iptable_filter ipt_REJECT ipt_MASQUERADE ipt_ECN ip_tables cdc_ether ax88179_178a asix xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_id xt_hl xt_ecn xt_dscp xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_NETMAP xt_LOG xt_HL xt_DSCP xt_CT xt_CLASSIFY x_tables usbserial usbnet ums_usbat ums_sddr55 ums_sddr09 ums_karma ums_jumpshot ums_isd200 ums_freecom ums_datafab ums_cypress ums_alauda slhc nf_reject_ipv4 nf_nat_masquerade_ipv4 nf_nat_ftp nf_nat nf_log_ipv4 nf_log_common nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack_ftp nf_conntrack crc_itu_t cdc_wdm cdc_acm sg nfsv3 nfs rtl8192cu rtl_usb rtl8192c_common rtlwifi rtl8187 rt2800usb rt2800lib rt2x00usb rt2x00lib crc_ccitt tun vfat fat lockd sunrpc grace ath9k_htc ath9k ath9k_common ath9k_hw ath mac80211 cfg80211 compat nls_utf8 nls_iso8859_1 nls_cp437 eeprom_93cx6 arc4 crypto_blkcipher usb_storage uhci_hcd ohci_platform ohci_hcd ehci_platform ehci_hcd sd_mod scsi_mod gpio_button_hotplug ext4 jbd2 mbcache usbcore nls_base usb_common crc16 mii aead crypto_hash [ 279.310000] CPU: 0 PID: 1888 Comm: rm Tainted: G W 3.18.36 #40 [ 279.320000] Stack : 00000000 00000000 00000000 00000000 803b4292 0000003e 00000000 80112c2c [ 279.320000] 00000001 80d0b088 802ffa20 803565e3 00000760 803b34d0 82bc6de0 80d0b088 [ 279.320000] 00000000 00000004 83b05800 800a35b4 00000003 8008039c 0000011a 80d0b088 [ 279.320000] 80303050 82945b44 00000000 00000000 00000000 00000000 00000000 00000000 [ 279.320000] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 279.320000] ... [ 279.350000] Call Trace: [ 279.360000] [<80071038>] show_stack+0x50/0x84 [ 279.360000] [<80080518>] warn_slowpath_common+0x84/0xb4 [ 279.370000] [<800805d0>] warn_slowpath_null+0x18/0x24 [ 279.370000] [<80112c2c>] drop_nlink+0x28/0x64 [ 279.380000] [<801514a4>] jffs2_rename+0x328/0x388 [ 279.380000] [<801060c4>] vfs_rename+0x3d8/0x698 [ 279.380000] [<80168be0>] ovl_copy_up_one+0x494/0x5ac [ 279.390000] [<80168da8>] ovl_copy_up+0xb0/0xfc [ 279.390000] [<80166c8c>] ovl_do_remove+0x84/0x3dc [ 279.400000] [<8010540c>] vfs_unlink+0xcc/0x190 [ 279.400000] [<80109780>] do_unlinkat+0x100/0x20c [ 279.410000] [<80062b5c>] handle_sys+0x11c/0x140 [ 279.410000] [ 279.410000] ---[ end trace 350250660c6252ba ]--- [ 279.430000] ------------[ cut here ]------------ [ 279.430000] WARNING: CPU: 0 PID: 1888 at fs/inode.c:282 drop_nlink+0x28/0x64() [ 279.440000] Modules linked in: pppoe ppp_async option iptable_nat usb_wwan sierra_net rndis_host qmi_wwan pppox ppp_generic pl2303 nf_nat_ipv4 nf_conntrack_ipv4 iptable_raw iptable_mangle iptable_filter ipt_REJECT ipt_MASQUERADE ipt_ECN ip_tables cdc_ether ax88179_178a asix xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_id xt_hl xt_ecn xt_dscp xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_NETMAP xt_LOG xt_HL xt_DSCP xt_CT xt_CLASSIFY x_tables usbserial usbnet ums_usbat ums_sddr55 ums_sddr09 ums_karma ums_jumpshot ums_isd200 ums_freecom ums_datafab ums_cypress ums_alauda slhc nf_reject_ipv4 nf_nat_masquerade_ipv4 nf_nat_ftp nf_nat nf_log_ipv4 nf_log_common nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack_ftp nf_conntrack crc_itu_t cdc_wdm cdc_acm sg nfsv3 nfs rtl8192cu rtl_usb rtl8192c_common rtlwifi rtl8187 rt2800usb rt2800lib rt2x00usb rt2x00lib crc_ccitt tun vfat fat lockd sunrpc grace ath9k_htc ath9k ath9k_common ath9k_hw ath mac80211 cfg80211 compat nls_utf8 nls_iso8859_1 nls_cp437 eeprom_93cx6 arc4 crypto_blkcipher usb_storage uhci_hcd ohci_platform ohci_hcd ehci_platform ehci_hcd sd_mod scsi_mod gpio_button_hotplug ext4 jbd2 mbcache usbcore nls_base usb_common crc16 mii aead crypto_hash [ 279.550000] CPU: 0 PID: 1888 Comm: rm Tainted: G W 3.18.36 #40 [ 279.560000] Stack : 00000000 00000000 00000000 00000000 803b4292 0000003e 00000000 80112c2c [ 279.560000] 00000001 83b05800 802ffa20 803565e3 00000760 803b34d0 82bc6de0 83b05800 [ 279.560000] 83c233b8 83c5a178 ffffffef 800a35b4 00000003 8008039c 0000011a 83b05800 [ 279.560000] 80303050 82945c4c 00000000 00000000 00000000 00000000 00000000 00000000 [ 279.560000] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 279.560000] ... [ 279.590000] Call Trace: [ 279.600000] [<80071038>] show_stack+0x50/0x84 [ 279.600000] [<80080518>] warn_slowpath_common+0x84/0xb4 [ 279.610000] [<800805d0>] warn_slowpath_null+0x18/0x24 [ 279.610000] [<80112c2c>] drop_nlink+0x28/0x64 [ 279.620000] [<80150d48>] jffs2_rmdir+0xa0/0xc8 [ 279.620000] [<8010905c>] vfs_rmdir+0x84/0x11c [ 279.620000] [<80166138>] ovl_cleanup+0x48/0x9c [ 279.630000] [<80166514>] ovl_check_empty_and_clear+0x1c8/0x240 [ 279.630000] [<80166dd8>] ovl_do_remove+0x1d0/0x3dc [ 279.640000] [<8010905c>] vfs_rmdir+0x84/0x11c [ 279.640000] [<801095f8>] do_rmdir+0xec/0x174 [ 279.650000] [<80062b5c>] handle_sys+0x11c/0x140 [ 279.650000] [ 279.650000] ---[ end trace 350250660c6252bb ]---
  13. Just did as u mentioned. The only difference is this: root@Pineapple:/tmp# opkg --dest sd --force-reinstall --force-overwrite hostapd-mana_2016-11-05_ar71xx.ipk sslsplit /bin/opkg: unknown sub-command hostapd-mana_2016-11-05_ar71xx.ipk usage: opkg [options...] sub-command [arguments...] where sub-command is one of: <...> regexp could be something like 'pkgname*' '*file*' or similar e.g. opkg info 'libstd*' or opkg search '*libop*' or opkg remove 'libncur*' So I simply did: root@Pineapple:/tmp# opkg --dest sd --force-overwrite install hostapd-mana_2016-11-05_ar71xx.ipk Installing hostapd-mana (2016-11-05) to sd... Configuring hostapd-mana. grep: /usr/lib/opkg/info/hostapd-mana.control: No such file or directory cat: can't open '/usr/lib/opkg/info/hostapd-mana.list': No such file or directory root@Pineapple:/tmp# So far so good! About sslplit, I installed in advance with opkg --dest sd install sslsplit And at least now everything is loading properly. One thing is still running though, after i hit CTRL-C to terminate your script are sslstrip, dns2proxy, etc. I guess, you will implement a graceful exit of them as well withing your script. ;] root@Pineapple:~# top Mem: 58312K used, 2892K free, 9652K shrd, 7880K buff, 16448K cached CPU: 0% usr 9% sys 0% nic 90% idle 0% io 0% irq 0% sirq Load average: 2.18 1.83 0.99 2/55 2060 PID PPID USER STAT VSZ %VSZ %CPU COMMAND 2060 1775 root R 1380 2% 9% top 1914 1 root S 16408 27% 0% python sslstrip.py -l 10000 -a -w /sd 1916 1 root S 14408 24% 0% python dns2proxy.py -i wlan1 1494 1 root S 11116 18% 0% php-fpm: master process (/etc/php5-fp 1496 1494 root S 11116 18% 0% php-fpm: pool www 1495 1494 root S 11116 18% 0% php-fpm: pool www 1773 1516 root S 5888 10% 0% sshd: root@pts/0 2032 1516 root S 5872 10% 0% sshd: root@pts/1 1241 1239 root S 3984 7% 0% nginx: worker process 1239 1 root S 3780 6% 0% nginx: master process /usr/sbin/nginx 1516 1 root S 3280 5% 0% /usr/sbin/sshd -D 1570 1 root S 1872 3% 0% /usr/sbin/hostapd -P /var/run/wifi-ph 1174 1 root S 1500 2% 0% /sbin/netifd 1 0 root S 1412 2% 0% /sbin/procd 1775 1773 root S 1388 2% 0% -ash 1653 1 root S 1384 2% 0% /usr/sbin/ntpd -n -S /usr/sbin/ntpd-h 2034 2032 root S 1384 2% 0% -ash 1230 1 root S 1380 2% 0% /usr/sbin/crond -f -c /etc/crontabs - 1142 1 root S 1044 2% 0% /sbin/logd -S 16 1850 1 nobody S 928 2% 0% dnsmasq -z -C /sd/etc/mana-toolkit/dn Overall, now works. Thanks! :) In the evening I will try to put everything in the SD card. Just to see if it will work as well. Since I bought the NANO to not have around USB keys hanging from it ;]
  14. Before trying your bash script I did the following steps: - factory reset to 1.1.3 - Enabled USB to /sd (by following your steps) - Installed MANA on the /sd (by following your steps) - Downloaded and chmod +x your bash into /root/ root@Pineapple:~# ./test.sh Device seems to be: ONLINE. Remember: Press CTRL+C to kill MANA-Toolkit properly. RTNETLINK answers: File exists Configuration file: /sd/etc/mana-toolkit/hostapd-mana.conf Using interface wlan1 with hwaddr 00:c0:ca:8d:c6:48 and ssid "MANA" wlan1: interface state UNINITIALIZED->ENABLED wlan1: AP-ENABLED RTNETLINK answers: File exists /sd/usr/share/mana-toolkit/sslstrip-hsts/sslstrip2 ./test.sh: line 142: sslsplit: command not found MANA - Directed probe request for foreign SSID 'bentley' from 44:d4:e0:xx:xx:xx Traceback (most recent call last): File "sslstrip.py", line 27, in <module> from twisted.web import http ImportError: No module named twisted.web Traceback (most recent call last): File "dns2proxy.py", line 21, in <module> import dns.message ImportError: No module named dns.message Traceback (most recent call last): File "/sd/usr/share/mana-toolkit/net-creds/net-creds.py", line 4, in <module> import logging ImportError: No module named logging MANA - Directed probe request for foreign SSID 'aaaaa' from 44:d4:e0:xxxx MANA - Directed probe request for foreign SSID 'bbbbbb' from 12:2d:42:xxxx MANA - Directed probe request for foreign SSID 'bbbb' from 12:2d:42:xxxx Here dmesg output: http://pastebin.com/Qne9LTba Here logread output: http://pastebin.com/cLrh3pUt
  15. root@Pineapple:/tmp# rm -rf *.ipk root@Pineapple:/tmp# ls TZ extroot overlay sess_13b5bfaee5310055b9fc3248f8cbf483 boot_ssid_count failsafe_button pineap.log shm button_setup hosts reporting.log spool dhcp.leases lib resolv.conf ssh-iQ6t89L7Lr dnsmasq.d lock resolv.conf.auto state empty log run sysinfo etc opkg-lists sd_action usr root@Pineapple:/tmp# wget https://github.com/adde88/hostapd-mana-openwrt/raw/master/bin/ar71xx/packages/base/asleap_2.2-1_ar71xx.ipk --2017-01-09 23:26:33-- https://github.com/adde88/hostapd-mana-openwrt/raw/master/bin/ar71xx/packages/base/asleap_2.2-1_ar71xx.ipk Resolving github.com... 192.30.253.112, 192.30.253.113 Connecting to github.com|192.30.253.112|:443... connected. HTTP request sent, awaiting response... 302 Found Location: https://raw.githubusercontent.com/adde88/hostapd-mana-openwrt/master/bin/ar71xx/packages/base/asleap_2.2-1_ar71xx.ipk [following] --2017-01-09 23:26:35-- https://raw.githubusercontent.com/adde88/hostapd-mana-openwrt/master/bin/ar71xx/packages/base/asleap_2.2-1_ar71xx.ipk Resolving raw.githubusercontent.com... 151.101.12.133 Connecting to raw.githubusercontent.com|151.101.12.133|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 12093 (12K) [application/octet-stream] Saving to: 'asleap_2.2-1_ar71xx.ipk' asleap_2.2-1_ar71xx.ipk 100%[=============================================================================================>] 11.81K --.-KB/s in 0.005s 2017-01-09 23:26:35 (2.44 MB/s) - 'asleap_2.2-1_ar71xx.ipk' saved [12093/12093] root@Pineapple:/tmp# wget https://github.com/adde88/hostapd-mana-openwrt/raw/master/bin/ar71xx/packages/base/hostapd-mana_2016-11-05_ar71xx.ipk --2017-01-09 23:26:35-- https://github.com/adde88/hostapd-mana-openwrt/raw/master/bin/ar71xx/packages/base/hostapd-mana_2016-11-05_ar71xx.ipk Resolving github.com... 192.30.253.113, 192.30.253.112 Connecting to github.com|192.30.253.113|:443... connected. HTTP request sent, awaiting response... 302 Found Location: https://raw.githubusercontent.com/adde88/hostapd-mana-openwrt/master/bin/ar71xx/packages/base/hostapd-mana_2016-11-05_ar71xx.ipk [following] --2017-01-09 23:26:37-- https://raw.githubusercontent.com/adde88/hostapd-mana-openwrt/master/bin/ar71xx/packages/base/hostapd-mana_2016-11-05_ar71xx.ipk Resolving raw.githubusercontent.com... 151.101.12.133 Connecting to raw.githubusercontent.com|151.101.12.133|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 9336883 (8.9M) [application/octet-stream] Saving to: 'hostapd-mana_2016-11-05_ar71xx.ipk' hostapd-mana_2016-11-05_ar71xx.ipk 100%[=============================================================================================>] 8.90M 1.11MB/s in 8.0s 2017-01-09 23:26:45 (1.11 MB/s) - 'hostapd-mana_2016-11-05_ar71xx.ipk' saved [9336883/9336883] root@Pineapple:/tmp# opkg update Downloading https://www.wifipineapple.com/nano/packages/Packages.gz. Updated list of available packages in /var/opkg-lists/chaos_calmer_pineapple. Downloading http://downloads.openwrt.org/chaos_calmer/15.05/ar71xx/generic/packages/base/Packages.gz. Updated list of available packages in /var/opkg-lists/chaos_calmer_base. Downloading http://downloads.openwrt.org/chaos_calmer/15.05/ar71xx/generic/packages/packages/Packages.gz. Updated list of available packages in /var/opkg-lists/chaos_calmer_packages. Downloading http://downloads.openwrt.org/chaos_calmer/15.05/ar71xx/generic/packages/management/Packages.gz. Updated list of available packages in /var/opkg-lists/chaos_calmer_management. Downloading http://downloads.openwrt.org/chaos_calmer/15.05/ar71xx/generic/packages/routing/Packages.gz. Updated list of available packages in /var/opkg-lists/chaos_calmer_routing. root@Pineapple:/tmp# opkg --dest sd --force-overwrite --force-reinstall install asleap_2.2-1_ar71xx.ipk hostapd-mana_2016-11-05_ar71xx.ipk No packages removed. Installing asleap (2.2-1) to sd... Installing hostapd-mana (2016-11-05) to sd... Segmentation fault root@Pineapple:/tmp# This segfault doesn't look very cool though :D As final test... can you backup your NANO's FW and send it to me? cd /tmp && dd if=/dev/mtd5 of=/tmp/sysbackup.bin Curious to see if is some sort of HW at this point...
  16. So... I tried different times and even used two different USBs. Here the full logs. http://pastebin.com/segg5RY9 As you can see... something is wrong... Now I will try also with the --force-reinstall option
  17. trust me. I did follow exactly the steps line by line. ;) at least twice ( after even factory reset and fw downgrade).( but without the usb trick) Therefore i'll factory reset once again and try as suggested. Just to be sure ;) p.s. the fw u r running is 1.1.3 or earlier version?
  18. Actually I was posting here for reference. I have tried many different countries from EU with strange charsets... and so far only Lithuanian creates issues. At this point, I guess I will start look deeper at our code, since, as you noticed as well, the main issue is this one. ;]
  19. Hi Zylla! I applied the confs/commands (i.e. in my case was sdB) and everything is configured properly. So far I didn't get any issues on dmesg about the sdb USB :) Sadly there is something wrong when I try to execute /usr/share/mana-toolkit/run-mana/mana-pineapple.sh root@Pineapple:/# /usr/share/mana-toolkit/run-mana/mana-pineapple.sh -ash: /usr/share/mana-toolkit/run-mana/mana-pineapple.sh: not found At this point I thought was because we installed it on /sd… so I did… root@Pineapple:/# chmod +x /sd/usr/share/mana-toolkit/run-mana/mana-pineapple.sh root@Pineapple:~# /sd/usr/share/mana-toolkit/run-mana/mana-pineapple.sh killall: hostapd-mana: no process killed killall: sslsplit: no process killed killall: python: no process killed Pineapple seems to be: ONLINE. RTNETLINK answers: File exists Configuration file: /etc/mana-toolkit/hostapd-mana.conf Using interface wlan1 with hwaddr 00:c0:ca:8d:c6:48 and ssid "MANA" RTNETLINK answers: File exists /sd/usr/share/mana-toolkit/run-mana/mana-pineapple.sh: line 56: cd: /usr/share/mana-toolkit/sslstrip-hsts/sslstrip2/: No such file or directory /sd/usr/share/mana-toolkit/run-mana/mana-pineapple.sh: line 59: cd: /usr/share/mana-toolkit/sslstrip-hsts/dns2proxy/: No such file or directory /sd/usr/share/mana-toolkit/run-mana/mana-pineapple.sh: line 61: cd: OLDPWD not set wlan1: interface state UNINITIALIZED->ENABLED wlan1: AP-ENABLED /sd/usr/share/mana-toolkit/run-mana/mana-pineapple.sh: line 64: sslsplit: command not found MANA - Directed probe request for foreign SSID 'yyyyy' from e4:9a:79:yy:yy:yy MANA - Directed probe request for foreign SSID 'xxxx' from 5c:f7:e6:xx:xx:xx python: can't open file 'sslstrip.py': [Errno 2] No such file or directory python: can't open file '/usr/share/mana-toolkit/net-creds/net-creds.py': [Errno 2] No such file or directory MANA has started successfully! Press enter to kill it properly python: can't open file 'dns2proxy.py': [Errno 2] No such file or directory After it, I just added /sd/ to all /usr/share… paths within mana-pineapple.sh then I got: root@Pineapple:~# /sd/usr/share/mana-toolkit/run-mana/mana-pineapple.sh killall: hostapd-mana: no process killed killall: sslsplit: no process killed killall: python: no process killed Pineapple seems to be: ONLINE. RTNETLINK answers: File exists Configuration file: /etc/mana-toolkit/hostapd-mana.conf Using interface wlan1 with hwaddr 00:c0:ca:8d:c6:48 and ssid "MANA" wlan1: interface state UNINITIALIZED->ENABLED wlan1: AP-ENABLED RTNETLINK answers: File exists /sd/usr/share/mana-toolkit/sslstrip-hsts/sslstrip2 /sd/usr/share/mana-toolkit/run-mana/mana-pineapple.sh: line 64: sslsplit: command not found Traceback (most recent call last): File "sslstrip.py", line 27, in <module> from twisted.web import http ImportError: No module named twisted.web Traceback (most recent call last): File "dns2proxy.py", line 21, in <module> import dns.message ImportError: No module named dns.message Traceback (most recent call last): File "/sd/usr/share/mana-toolkit/net-creds/net-creds.py", line 4, in <module> import logging ImportError: No module named logging MANA has started successfully! Press enter to kill it properly killall: sslsplit: no process killed killall: python: no process killed root@Pineapple:~# Overall I believe something is wrong with the installation process into the SD… some symlinks were not likely applied though. Otherwise this should not have happened I guess: root@Pineapple:/# /usr/share/mana-toolkit/run-mana/mana-pineapple.sh -ash: /usr/share/mana-toolkit/run-mana/mana-pineapple.sh: not found
  20. More errors: Errors with http://www.kfc.lt Traceback (most recent call last): File "/pineapple/modules/PortalAuth/includes/scripts/portalclone.py", line 24, in cloner.cloneResources() File "/sd/modules/PortalAuth/includes/scripts/PortalCloner.py", line 206, in cloneResources checkedName = self.checkFileName(fname) File "/sd/modules/PortalAuth/includes/scripts/PortalCloner.py", line 85, in checkFileName while os.path.exists(path): File "/usr/lib/python2.7/genericpath.py", line 18, in exists os.stat(path) UnicodeEncodeError: 'ascii' codec can't encode characters in position 56-57: ordinal not in range(128) Errors with http://www.cili.lt /sd/modules/PortalAuth/includes/scripts/libs/requests/packages/urllib3/connectionpool.py:747: InsecureRequestWarning: Unverified HTTPS request is being made. Adding certificate verification is strongly advised. See: https://urllib3.readthedocs.org/en/latest/security.html InsecureRequestWarning) /sd/modules/PortalAuth/includes/scripts/libs/requests/packages/urllib3/connectionpool.py:747: InsecureRequestWarning: Unverified HTTPS request is being made. Adding certificate verification is strongly advised. See: https://urllib3.readthedocs.org/en/latest/security.html InsecureRequestWarning) /sd/modules/PortalAuth/includes/scripts/libs/requests/packages/urllib3/connectionpool.py:747: InsecureRequestWarning: Unverified HTTPS request is being made. Adding certificate verification is strongly advised. See: https://urllib3.readthedocs.org/en/latest/security.html InsecureRequestWarning) Traceback (most recent call last): File "/pineapple/modules/PortalAuth/includes/scripts/portalclone.py", line 24, in cloner.cloneResources() File "/sd/modules/PortalAuth/includes/scripts/PortalCloner.py", line 124, in cloneResources self.downloadFile(r,fname) File "/sd/modules/PortalAuth/includes/scripts/PortalCloner.py", line 56, in downloadFile with open(self.resourceDirectory + name, 'wb') as out_file: IOError: [Errno 21] Is a directory: '/root/portals/cili/resources/'
  21. A little update... Out of curiosity I wanted to try what Zylla suggested... Sadly using the USB as /sd and also symlinking /root/portals to /sd/portals DID NOT solve much: With your https://www.starbucks.com/coffeehouse/wireless-internet or http://www.starbucks.pl or http://www.starbucks.de PortalAuth process starts... and successfully finish. But with the following ones, I get errors...: Traceback (most recent call last): File "/pineapple/modules/PortalAuth/includes/scripts/portalclone.py", line 23, in cloner.fetchPage(args.url) File "/sd/modules/PortalAuth/includes/scripts/PortalCloner.py", line 100, in fetchPage response = requests.get(url, verify=False) File "/sd/modules/PortalAuth/includes/scripts/libs/requests/api.py", line 65, in get return request('get', url, **kwargs) File "/sd/modules/PortalAuth/includes/scripts/libs/requests/api.py", line 49, in request response = session.request(method=method, url=url, **kwargs) File "/sd/modules/PortalAuth/includes/scripts/libs/requests/sessions.py", line 447, in request prep = self.prepare_request(req) File "/sd/modules/PortalAuth/includes/scripts/libs/requests/sessions.py", line 378, in prepare_request hooks=merge_hooks(request.hooks, self.hooks), File "/sd/modules/PortalAuth/includes/scripts/libs/requests/models.py", line 303, in prepare self.prepare_url(url, params) File "/sd/modules/PortalAuth/includes/scripts/libs/requests/models.py", line 360, in prepare_url "Perhaps you meant http://{0}?".format(url)) requests.exceptions.MissingSchema: Invalid URL u'www.mcdonalds.it': No schema supplied. Perhaps you meant http://www.mcdonalds.it? Instead for http://www.investlithuania.com/ and http://www.delfi.lt I get the unicode error... /sd/modules/PortalAuth/includes/scripts/libs/requests/packages/urllib3/connectionpool.py:747: InsecureRequestWarning: Unverified HTTPS request is being made. Adding certificate verification is strongly advised. See: https://urllib3.readthedocs.org/en/latest/security.html InsecureRequestWarning) /sd/modules/PortalAuth/includes/scripts/libs/requests/packages/urllib3/connectionpool.py:747: InsecureRequestWarning: Unverified HTTPS request is being made. Adding certificate verification is strongly advised. See: https://urllib3.readthedocs.org/en/latest/security.html InsecureRequestWarning) /sd/modules/PortalAuth/includes/scripts/libs/requests/packages/urllib3/connectionpool.py:747: InsecureRequestWarning: Unverified HTTPS request is being made. Adding certificate verification is strongly advised. See: https://urllib3.readthedocs.org/en/latest/security.html InsecureRequestWarning) /sd/modules/PortalAuth/includes/scripts/libs/requests/packages/urllib3/connectionpool.py:747: InsecureRequestWarning: Unverified HTTPS request is being made. Adding certificate verification is strongly advised. See: https://urllib3.readthedocs.org/en/latest/security.html InsecureRequestWarning) /sd/modules/PortalAuth/includes/scripts/libs/requests/packages/urllib3/connectionpool.py:747: InsecureRequestWarning: Unverified HTTPS request is being made. Adding certificate verification is strongly advised. See: https://urllib3.readthedocs.org/en/latest/security.html InsecureRequestWarning) /sd/modules/PortalAuth/includes/scripts/libs/requests/packages/urllib3/connectionpool.py:747: InsecureRequestWarning: Unverified HTTPS request is being made. Adding certificate verification is strongly advised. See: https://urllib3.readthedocs.org/en/latest/security.html InsecureRequestWarning) /sd/modules/PortalAuth/includes/scripts/libs/requests/packages/urllib3/connectionpool.py:747: InsecureRequestWarning: Unverified HTTPS request is being made. Adding certificate verification is strongly advised. See: https://urllib3.readthedocs.org/en/latest/security.html InsecureRequestWarning) /sd/modules/PortalAuth/includes/scripts/libs/requests/packages/urllib3/connectionpool.py:747: InsecureRequestWarning: Unverified HTTPS request is being made. Adding certificate verification is strongly advised. See: https://urllib3.readthedocs.org/en/latest/security.html InsecureRequestWarning) /sd/modules/PortalAuth/includes/scripts/libs/requests/packages/urllib3/connectionpool.py:747: InsecureRequestWarning: Unverified HTTPS request is being made. Adding certificate verification is strongly advised. See: https://urllib3.readthedocs.org/en/latest/security.html InsecureRequestWarning) /sd/modules/PortalAuth/includes/scripts/libs/requests/packages/urllib3/connectionpool.py:747: InsecureRequestWarning: Unverified HTTPS request is being made. Adding certificate verification is strongly advised. See: https://urllib3.readthedocs.org/en/latest/security.html InsecureRequestWarning) /sd/modules/PortalAuth/includes/scripts/libs/requests/packages/urllib3/connectionpool.py:747: InsecureRequestWarning: Unverified HTTPS request is being made. Adding certificate verification is strongly advised. See: https://urllib3.readthedocs.org/en/latest/security.html InsecureRequestWarning) /sd/modules/PortalAuth/includes/scripts/libs/requests/packages/urllib3/connectionpool.py:747: InsecureRequestWarning: Unverified HTTPS request is being made. Adding certificate verification is strongly advised. See: https://urllib3.readthedocs.org/en/latest/security.html InsecureRequestWarning) /sd/modules/PortalAuth/includes/scripts/libs/requests/packages/urllib3/connectionpool.py:747: InsecureRequestWarning: Unverified HTTPS request is being made. Adding certificate verification is strongly advised. See: https://urllib3.readthedocs.org/en/latest/security.html InsecureRequestWarning) /sd/modules/PortalAuth/includes/scripts/libs/requests/packages/urllib3/connectionpool.py:747: InsecureRequestWarning: Unverified HTTPS request is being made. Adding certificate verification is strongly advised. See: https://urllib3.readthedocs.org/en/latest/security.html InsecureRequestWarning) /sd/modules/PortalAuth/includes/scripts/libs/requests/packages/urllib3/connectionpool.py:747: InsecureRequestWarning: Unverified HTTPS request is being made. Adding certificate verification is strongly advised. See: https://urllib3.readthedocs.org/en/latest/security.html InsecureRequestWarning) /sd/modules/PortalAuth/includes/scripts/libs/requests/packages/urllib3/connectionpool.py:747: InsecureRequestWarning: Unverified HTTPS request is being made. Adding certificate verification is strongly advised. See: https://urllib3.readthedocs.org/en/latest/security.html InsecureRequestWarning) /sd/modules/PortalAuth/includes/scripts/libs/requests/packages/urllib3/connectionpool.py:747: InsecureRequestWarning: Unverified HTTPS request is being made. Adding certificate verification is strongly advised. See: https://urllib3.readthedocs.org/en/latest/security.html InsecureRequestWarning) Traceback (most recent call last): File "/pineapple/modules/PortalAuth/includes/scripts/portalclone.py", line 24, in cloner.cloneResources() File "/sd/modules/PortalAuth/includes/scripts/PortalCloner.py", line 197, in cloneResources fh = open(self.portalDirectory + css_file).read().decode('utf-8') File "/usr/lib/python2.7/encodings/utf_8.py", line 16, in decode return codecs.utf_8_decode(input, errors, True) UnicodeDecodeError: 'utf8' codec can't decode byte 0x80 in position 10: invalid start byte
  22. Guys, Which configs (e.g fstab) and commands I have to use in order to use the USB as suggested (i.e. both /sd and swap partitions)? Wanna try out it as well. Because I believe, also the PortalAuth issues I have, are connected to the SD card's ones.
  23. Well well... seems this issue is more spread than I thought...
  24. Did now, sadly no success. However I am starting to think is an issue related with the usage of SD in the NANO... (I.e. not about a specific SD card I mean).
  25. which modules creates problems on SD card?!
×
×
  • Create New...