Dark Jester

I'd look at S08E03 and watch the segment on Ampache or S07E26 on the python streaming solution. I've personally set up the python script one, but plan on trying out Ampache. These should be a good building block to at least get you started.

I'm having a problem installing Proxmox VE. Here is the iso: • proxmox-ve_1.8-5754-4.iso I have verified the MD5sum is correct. My hardware is: • ASUS P7P55 LX LGA 1156 Intel P55 ATX Intel Motherboard • 3ware 9650SE-4LPML PCI Express Lanes: 4 SATA II Controller Card RAID Levels 0, 1, 5, 10, Single Disk, JBOD, KIT • KINGWIN KF-4000-BK 3.5" Internal hot swap rack raid-4 bay • Intel Core i5-750 Lynnfield 2.66GHz 8MB L3 Cache LGA 1156 95W Quad-Core Processor BX80605I5750 • HITACHI Deskstar HD32000 IDK/7K (0S00164) 2TB 7200 RPM 32MB Cache SATA 3.0Gb/s 3.5" Internal Hard Drive x4 • G.SKILL Ripjaws Series 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL9D-4GBRL The four (4) HDD are setup into a RAID-5 array. When I load from the DVD I get to the initial splash image, hit return to start the installation and then the following gets posted on the screen: " ACPI: I/O resource 0000:00:1f.3 [0x4000-0x41f] conflicts with ACPI region SMRG [0x400-0x41f] searching for cdrom testing again in 5 seconds testing again in 5 seconds testing cdrom /dev/sr0 found proxmox cdrom Starting Proxmox installation Installing additional hardware drivers Starting the hotplig events dispatcher: udevd. Synthesizing the initial hotplug events...done. Waiting for /dev to be fully populated... " It is at this point that the installation hangs. Any help would be very appreciated.