Jump to content

SystemCrash86

Active Members
  • Posts

    250
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by SystemCrash86

  1. That's a good question as I have the nano and the tetra
  2. That link sends me to a site that says rc.local is the answer and normally that would be correct. I googled and searched for days before making this post and rc.local is the very first thing that pops up - However in kali linux this file no longer exists.
  3. Can someone please tell me how to disable my eth0 interface on boot. I am using the latest version of Kali Linux 2020-02-17. I can sudo ifconfig eth0 down and this works no problem. Except i dont want to do this every time and would just like it to be disabled at boot until i need it. Normally i would add it to the /etc/rc.local file but that does not exist any more.
  4. Hi guys, i am having a bit of a nightmare with this one and i have been pulling my hair out for nearly two weeks trying to fix this issue and finally i decided to ask for help from this great community. I have a standard Linux Mint installed on my laptop and everything is updated. The problem that i am having is that there is a loud static noise coming from my speakers whenever my laptop is on battery power. I get no static at all when my laptop in connected to AC power which leads me to believe it is a power saving issue of some kind but not sure. I have tlp power saver installed and tweaking the settings does little good. On battery power though sometimes the static is a bit quieter to the point of stopping completely. So i think great my issue is solved, only for me to load media like vlc or clementine etc and i get the loud audio static again and when i close these windows it all goes quiet again. There is also the loud static type sound when powering on and off my laptop. I am completely stuck. Please i really really hope someone can help
  5. I have a problem with pyrit detecting my nvidia gpu on my kali linux machine. I have the latest kali linux (as of 28/08/2019) and i successfuly installed nvidia drivers without any errors. This is the guide i used: https://hackersterminal.com/how-to-install-nvidia-driver-on-kali-linux/ and it work - no errors at all. Now when i want to use my gpu in pyrit it is not detected at all. I even changed the config file for pyrit to allow cuda when i enter in a terminal: python -c 'from cpyrit import _cpyrit_cuda' i get the following error: Traceback (most recent call last): File "<string>", line 1, in <module> ImportError: cannot import name _cpyrit_cuda please help, i have no idea how to fix this and after days on searching the internet i was unable to find anything
  6. i think i may have missed a step somewhere because i followed that and after i start the new wpa_supplicant.conf i am greeting with: "successfully initialized wpa_supplicant" but when i issue ifconfig i find that the output is the same as before with no ip. could i have missed something?
  7. root@mint:~# ps aux | grep -e 'dhclient' -e 'wpa_supplicant' | grep -v grep root 820 0.0 0.0 29332 7424 ? Ss 22:15 0:00 /sbin/wpa_supplicant -u -s -O /run/wpa_supplicant root@mint:~# root@mint:~# root@mint:~# ping 127.0.0.1 PING 127.0.0.1 (127.0.0.1) 56(84) bytes of data. 64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.051 ms 64 bytes from 127.0.0.1: icmp_seq=2 ttl=64 time=0.066 ms 64 bytes from 127.0.0.1: icmp_seq=3 ttl=64 time=0.064 ms ^C --- 127.0.0.1 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 2040ms rtt min/avg/max/mdev = 0.051/0.060/0.066/0.009 ms root@mint:~# root@mint:~# ping 8.8.8.8 connect: Network is unreachable root@mint:~# ping www.google.com ping: www.google.com: Name or service not known root@mint:~# hope this helps
  8. hi thanks for the reply. i hope this helps: root@mint:~# ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: enp2s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel state DOWN group default qlen 1000 link/ether b0:5a:da:5c:8f:2f brd ff:ff:ff:ff:ff:ff 3: wlp3s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default qlen 1000 link/ether ac:b5:7d:c7:c3:06 brd ff:ff:ff:ff:ff:ff root@mint:~# ifconfig enp2s0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 ether b0:5a:da:5c:8f:2f txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 1000 (Local Loopback) RX packets 3705 bytes 264858 (264.8 KB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 3705 bytes 264858 (264.8 KB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 wlp3s0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 ether ac:b5:7d:c7:c3:06 txqueuelen 1000 (Ethernet) RX packets 7 bytes 1071 (1.0 KB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 22 bytes 4476 (4.4 KB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 root@mint:~# iwconfig lo no wireless extensions. wlp3s0 IEEE 802.11 ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=15 dBm Retry short limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off enp2s0 no wireless extensions. root@mint:~# iptables-save # Generated by iptables-save v1.6.1 on Tue Aug 20 22:14:27 2019 *filter :INPUT ACCEPT [1921:136393] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [1921:136393] COMMIT # Completed on Tue Aug 20 22:14:27 2019 root@mint
  9. I have a fresh install of Linux mint and the WiFi works and I can use the Internet perfectly. However after installing katoolin, which I get no errors, after rebooting I can't get any Internet at all even though network manager says I am connected to my network. I can't ping anything. I think it messed up my dhcp or something but I don't know how to find out where it went wrong What happened?
  10. I tried that just now. Still can't figure it out. Is it worth a reinstall?
  11. Here is the output: root@kali:~# lsmod | grep 'snd_' snd_hda_codec_hdmi 57344 1 snd_soc_skl 114688 0 snd_soc_skl_ipc 73728 1 snd_soc_skl snd_soc_sst_ipc 16384 1 snd_soc_skl_ipc snd_soc_sst_dsp 36864 1 snd_soc_skl_ipc snd_hda_ext_core 28672 1 snd_soc_skl snd_hda_codec_realtek 122880 1 snd_soc_acpi_intel_match 24576 1 snd_soc_skl snd_soc_acpi 16384 2 snd_soc_acpi_intel_match,snd_soc_skl snd_hda_codec_generic 86016 1 snd_hda_codec_realtek snd_soc_core 253952 1 snd_soc_skl snd_compress 24576 1 snd_soc_core snd_hda_intel 45056 9 snd_hda_codec 151552 4 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec_realtek snd_hda_core 94208 7 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_ext_core,snd_hda_codec,snd_hda_codec_realtek,snd_soc_skl snd_hwdep 16384 1 snd_hda_codec snd_pcm 114688 8 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_ext_core,snd_hda_codec,snd_soc_core,snd_soc_skl,snd_hda_core snd_timer 36864 2 snd_pcm snd 94208 26 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hwdep,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek,snd_timer,snd_compress,snd_soc_core,snd_pcm root@kali:~# sudo lshw -C sound *-usb:0 description: Video product: HP Truevision HD vendor: Sonix Technology Co., Ltd. physical id: 5 bus info: usb@1:5 version: 1.03 capabilities: usb-2.00 configuration: driver=uvcvideo maxpower=500mA speed=480Mbit/s *-multimedia description: Audio device product: Sunrise Point-LP HD Audio vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 21 width: 64 bits clock: 33MHz capabilities: pm msi bus_master cap_list configuration: driver=snd_hda_intel latency=32 resources: irq:128 memory:96228000-9622bfff memory:96210000-9621ffff root@kali:~#
  12. Hi, I am having a very unusual problem with my Kali Linux install on my laptop. Everything works fine except for the audio recently, it has started to make loud crackling noises and such... Like the mic and speakers are too high or interfering with each other. But the problem persists even when I mute everything. This is a recent problem that started within the last week and I have no idea how to fix and I am reluctant to do another install because I tried a kali linux live USB and seemed to have the same problem. I narrowed this down to kali linux because I tried a live USB if Linux nate and appeared to have no issues at the time. Hope someone can help
  13. I have a problem on the latest update of my ubuntu system. I am unable to connect to the internet using Network Manager and i don;t know how to fix it. When i use wicd it keeps telling me "unable to get IP address". systemcrash86@home:~$ sudo service network-manager status ● NetworkManager.service - Network Manager Loaded: loaded (/lib/systemd/system/NetworkManager.service; enabled; vendor preset: enabled) Active: active (running) since Thu 2019-03-07 20:45:48 GMT; 1min 54s ago Docs: man:NetworkManager(8) Main PID: 7615 (NetworkManager) Tasks: 3 (limit: 4915) Memory: 13.0M CGroup: /system.slice/NetworkManager.service └─7615 /usr/sbin/NetworkManager --no-daemon Mar 07 20:46:14 TheMachine NetworkManager[7615]: <info> [1551991574.0502] dhcp4 (wlp2s5): dhclient started with pid 7674 Mar 07 20:46:14 TheMachine NetworkManager[7615]: <info> [1551991574.0590] dhcp4 (wlp2s5): client pid 7674 exited with status 1 Mar 07 20:46:14 TheMachine NetworkManager[7615]: <info> [1551991574.0590] dhcp4 (wlp2s5): state changed unknown -> done Mar 07 20:46:14 TheMachine NetworkManager[7615]: <info> [1551991574.0591] dhcp4 (wlp2s5): canceled DHCP transaction Mar 07 20:46:46 TheMachine NetworkManager[7615]: <info> [1551991606.1337] device (wlp2s5): state change: ip-config -> failed (reason 'ip-config-unavailable', sys-iface-state: 'managed') Mar 07 20:46:46 TheMachine NetworkManager[7615]: <info> [1551991606.1344] manager: NetworkManager state is now DISCONNECTED Mar 07 20:46:46 TheMachine NetworkManager[7615]: <warn> [1551991606.1349] device (wlp2s5): Activation: failed for connection 'home-network' Mar 07 20:46:46 TheMachine NetworkManager[7615]: <info> [1551991606.1648] device (wlp2s5): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed') Mar 07 20:46:46 TheMachine NetworkManager[7615]: <warn> [1551991606.1908] sup-iface[0x55b009eb40b0,wlp2s5]: connection disconnected (reason -3) Mar 07 20:46:46 TheMachine NetworkManager[7615]: <info> [1551991606.1908] device (wlp2s5): supplicant interface state: completed -> disconnected systemcrash86@home:~$ systemcrash86@home:/etc/default$ nmcli wlp2s5: connecting (getting IP configuration) to home-network "Qualcomm Atheros AR9227" wifi (ath9k), 10:FE:ED:87:8E:FD, hw, mtu 1500 enp4s0: unavailable "Realtek RTL8111/8168/8411" ethernet (r8169), 70:4D:7B:64:25:22, hw, mtu 1500 lo: unmanaged "lo" loopback (unknown), 00:00:00:00:00:00, sw, mtu 65536 Use "nmcli device show" to get complete information about known devices and "nmcli connection show" to get an overview on active connection profiles. Consult nmcli(1) and nmcli-examples(5) manual pages for complete usage details. systemcrash86@home:/etc/default$ sudo lshw -C network *-network description: Wireless interface product: AR9227 Wireless Network Adapter vendor: Qualcomm Atheros physical id: 5 bus info: pci@0000:02:05.0 logical name: wlp2s5 version: 01 serial: 10:fe:ed:87:8e:fd width: 32 bits clock: 66MHz capabilities: bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=4.18.0-16-generic firmware=N/A latency=168 link=no multicast=yes wireless=IEEE 802.11 resources: irq:20 memory:fe900000-fe90ffff *-network description: Ethernet interface product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:04:00.0 logical name: enp4s0 version: 0c serial: 70:4d:7b:64:25:22 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl8168g-2_0.0.1 02/06/13 latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:17 ioport:d000(size=256) memory:fe800000-fe800fff memory:f0000000-f0003fff systemcrash86@home:/etc/default$ systemcrash86@home:/etc/default$ nmcli device show GENERAL.DEVICE: wlp2s5 GENERAL.TYPE: wifi GENERAL.HWADDR: 10:FE:ED:87:8E:FD GENERAL.MTU: 1500 GENERAL.STATE: 30 (disconnected) GENERAL.CONNECTION: -- GENERAL.CON-PATH: -- GENERAL.DEVICE: enp4s0 GENERAL.TYPE: ethernet GENERAL.HWADDR: 70:4D:7B:64:25:22 GENERAL.MTU: 1500 GENERAL.STATE: 20 (unavailable) GENERAL.CONNECTION: -- GENERAL.CON-PATH: -- WIRED-PROPERTIES.CARRIER: off GENERAL.DEVICE: lo GENERAL.TYPE: loopback GENERAL.HWADDR: 00:00:00:00:00:00 GENERAL.MTU: 65536 GENERAL.STATE: 10 (unmanaged) GENERAL.CONNECTION: -- GENERAL.CON-PATH: -- IP4.ADDRESS[1]: 127.0.0.1/8 IP4.GATEWAY: -- IP6.ADDRESS[1]: ::1/128 IP6.GATEWAY: -- IP6.ROUTE[1]: dst = ::1/128, nh = ::, mt = 256 systemcrash86@home:/etc/default$
  14. I was getting no where so i started trying different OS's and i had some limited success using Linux Mint. On the Live CD i install mesa-opencl-icd version 11.2.0-1ubuntu2 (xenial) version as well as my opencl headers and an LLVM 3.8.0. At this point i can run pyrit benchmark and have it comple normally using my GPU. Great, I thought. Now all i would have to do is install it to my actual machine and i would be good to go. But Nope. I installed it to my machine and preformed the same steps as what i did on the live cd before install and i get alot of errors that suddenly appear: systemcrash86@home ~ $ pyrit list_cores Pyrit 0.5.1 (C) 2008-2011 Lukas Lueg - 2015 John Mora https://github.com/JPaulMora/Pyrit This code is distributed under the GNU General Public License v3+ The following cores seem available... #1: 'CPU-Core (SSE2/AES)' #2: 'CPU-Core (SSE2/AES)' #3: 'CPU-Core (SSE2/AES)' #4: 'CPU-Core (SSE2/AES)' The following OpenCL GPUs seem aviable... #1: 'OpenCL-Device 'AMD TAHITI (DRM 2.49.0, LLVM 3.8.0)'' rapt0r@TheMachine ~ $ pyrit benchmark Pyrit 0.5.1 (C) 2008-2011 Lukas Lueg - 2015 John Mora https://github.com/JPaulMora/Pyrit This code is distributed under the GNU General Public License v3+ Calibrating... Exception in thread OpenCL-Device 'AMD TAHITI (DRM 2.49.0, LLVM 3.8.0)': Traceback (most recent call last): File "/usr/lib/python2.7/threading.py", line 801, in __bootstrap_inner self.run() File "/usr/local/lib/python2.7/dist-packages/cpyrit/cpyrit.py", line 112, in run self._testComputeFunction(101) File "/usr/local/lib/python2.7/dist-packages/cpyrit/cpyrit.py", line 101, in _testComputeFunction self.solve(Core.TV_ESSID, [Core.TV_PW] * i))): SystemError: Failed to build kernel (CL_BUILD_PROGRAM_FAILURE): Invalid value (Producer: 'LLVM5.0.0' Reader: 'LLVM 3.8.0') Exception in thread CPU-Core (SSE2/AES): Traceback (most recent call last): File "/usr/lib/python2.7/threading.py", line 801, in __bootstrap_inner self.run() File "/usr/local/lib/python2.7/dist-packages/cpyrit/cpyrit.py", line 109, in run essid, pwlist = self.queue._gather(self.buffersize, timeout=0.5) File "/usr/local/lib/python2.7/dist-packages/cpyrit/cpyrit.py", line 643, in _gather self._check_cores() File "/usr/local/lib/python2.7/dist-packages/cpyrit/cpyrit.py", line 501, in _check_cores raise SystemError("The core '%s' has died unexpectedly" % core) SystemError: The core 'OpenCL-Device 'AMD TAHITI (DRM 2.49.0, LLVM 3.8.0)'' has died unexpectedly Exception in thread CPU-Core (SSE2/AES): Traceback (most recent call last): File "/usr/lib/python2.7/threading.py", line 801, in __bootstrap_inner self.run() File "/usr/local/lib/python2.7/dist-packages/cpyrit/cpyrit.py", line 109, in run essid, pwlist = self.queue._gather(self.buffersize, timeout=0.5) File "/usr/local/lib/python2.7/dist-packages/cpyrit/cpyrit.py", line 643, in _gather self._check_cores() File "/usr/local/lib/python2.7/dist-packages/cpyrit/cpyrit.py", line 501, in _check_cores raise SystemError("The core '%s' has died unexpectedly" % core) SystemError: The core 'OpenCL-Device 'AMD TAHITI (DRM 2.49.0, LLVM 3.8.0)'' has died unexpectedly Exception in thread CPU-Core (SSE2/AES): Traceback (most recent call last): File "/usr/lib/python2.7/threading.py", line 801, in __bootstrap_inner self.run() File "/usr/local/lib/python2.7/dist-packages/cpyrit/cpyrit.py", line 109, in run essid, pwlist = self.queue._gather(self.buffersize, timeout=0.5) File "/usr/local/lib/python2.7/dist-packages/cpyrit/cpyrit.py", line 643, in _gather self._check_cores() File "/usr/local/lib/python2.7/dist-packages/cpyrit/cpyrit.py", line 501, in _check_cores raise SystemError("The core '%s' has died unexpectedly" % core) SystemError: The core 'OpenCL-Device 'AMD TAHITI (DRM 2.49.0, LLVM 3.8.0)'' has died unexpectedly Exception in thread CPU-Core (SSE2/AES): Traceback (most recent call last): File "/usr/lib/python2.7/threading.py", line 801, in __bootstrap_inner self.run() File "/usr/local/lib/python2.7/dist-packages/cpyrit/cpyrit.py", line 109, in run essid, pwlist = self.queue._gather(self.buffersize, timeout=0.5) File "/usr/local/lib/python2.7/dist-packages/cpyrit/cpyrit.py", line 643, in _gather self._check_cores() File "/usr/local/lib/python2.7/dist-packages/cpyrit/cpyrit.py", line 501, in _check_cores raise SystemError("The core '%s' has died unexpectedly" % core) SystemError: The core 'OpenCL-Device 'AMD TAHITI (DRM 2.49.0, LLVM 3.8.0)'' has died unexpectedly Traceback (most recent call last): File "/usr/local/bin/pyrit", line 6, in <module> pyrit_cli.Pyrit_CLI().initFromArgv() File "/usr/local/lib/python2.7/dist-packages/pyrit_cli.py", line 117, in initFromArgv func(self, **options) File "/usr/local/lib/python2.7/dist-packages/pyrit_cli.py", line 1199, in benchmark cp.enqueue('foo', ['barbarbar'] * 500) File "/usr/local/lib/python2.7/dist-packages/cpyrit/cpyrit.py", line 575, in enqueue self._check_cores() File "/usr/local/lib/python2.7/dist-packages/cpyrit/cpyrit.py", line 501, in _check_cores raise SystemError("The core '%s' has died unexpectedly" % core) SystemError: The core 'CPU-Core (SSE2/AES)' has died unexpectedly systemcrash86@home ~ $
  15. I have a laptop with an nvidia card and that worked no problem. I ran dmesg to try and see what my segmentation fault could be and i got this result back: [80391.176164] pyrit[26339]: segfault at 77468 ip 00007f1b63bc6741 sp 00007f1b50ff84b8 error 4 in libLLVM-5.0.so.1[7f1b63163000+3245000] i have no idea what to do to fix this issue
  16. Do i need to install nvidia and cuda drivers as my desktop has a amd cpu and radeon gpu? I don't remember having to do that last time
  17. I know but i would like to use pyrit, it's my fave tool and i have no idea how to fix it. Plus hashcat on my system with my radeon card never worked well but pyrit did and i hope someone has an idea how to fix
  18. I am having an issue with pyrit on my linux system and i have no idea how to fix and i hope someone has an answer. Everything was working fine without any issues until i had to reinstall my desktop. And ever since then i have been unable to get pyrit to work correctly. I have tried lots of linux distros but still have the same result. systemcrash86@home:~$ pyrit list_cores Pyrit 0.5.1 (C) 2008-2011 Lukas Lueg - 2015 John Mora https://github.com/JPaulMora/Pyrit This code is distributed under the GNU General Public License v3+ The following cores seem available... #1: 'CPU-Core (SSE2/AES)' #2: 'CPU-Core (SSE2/AES)' #3: 'CPU-Core (SSE2/AES)' #4: 'CPU-Core (SSE2/AES)' The following OpenCL GPUs seem aviable... #1: 'OpenCL-Device 'AMD TAHITI (DRM 2.50.0 / 4.13.0-38-generic, LLVM 5.0.1)'' systemcrash86@home:~$ pyrit benchmark Pyrit 0.5.1 (C) 2008-2011 Lukas Lueg - 2015 John Mora https://github.com/JPaulMora/Pyrit This code is distributed under the GNU General Public License v3+ Calibrating... Segmentation fault systemcrash86@TheMachine:~$ Hope someone can help
  19. Hi Seb, Thanks for the update, look forward to the fix
  20. It only appears to be the "get" module for the tetra. The module "get - which is the Profile clients through the browser plugins supported by their browser " no issue at all with the nano, just the tetra
  21. Has any one got any solutions to the problem of not being able to install dependences on the latest firmware (2.0.2) for the Ettercap and Ngrep modules?
  22. I am having some trouble installing the Get Module for the pineapple Tetra runing the new latest firmware of 2.0.2. I have reset the pineapple several times as well as numerous firmware recoveries and still nothing. It just hangs saying "Downloading Module, please wait. " but nothing happens. It just stays there with the little animated pineapple. I seem to have no problem with my nano so the problem only exists with my tetra. Any ideas?
  23. I am having trouble install the Get module on the WiFi Pineapple Tetra running the latest 2.0.2 firmware. I go to download the module from the gui interface and it just stalls at "Download Module, please wait" I give it some time but it just seems to hang. I have reset, factory reset the tetra and still nothing, i have no problem downloading any other module only this one and i don't know why
  24. Having a bit of trouble installed the dependences for the Ettercap module on the wifi pineapple nano running the updated 201 firmware. The module itself downloads and installs without any issues at all but when it come to installing the dependences needed for it to run it doesn't work. I tried pineapple interface and nothing. Then i decided to ssh into the pineapple and install it using the command line using opkg Installing ettercap (0.8.2-1) to root... Downloading https://www.wifipineapple.com/nano/packages/ettercap_0.8.2-1_ar71xx.ipk. Collected errors: * satisfy_dependencies_for: Cannot satisfy the following dependencies for ettercap: * libnet1 * * opkg_install_cmd: Cannot install package ettercap. root@Pineapple:~# How do i fix for the pineapple?
×
×
  • Create New...