Jump to content

Darren Kitchen

Root Admin
  • Content Count

    4,826
  • Joined

  • Days Won

    223

Everything posted by Darren Kitchen

  1. Keep in mind you can always access your WiFi Pineapple's serial console - which will provide a bash terminal on the linux OS - right from the UART port. This is incredibly helpful for debugging as you'll see the system log live as the device boots and while interacting with the shell. Here's more on this feature: https://docs.hak5.org/hc/en-us/articles/360010555553-Serial-Access-WiFi-Pineapple-TETRA
  2. Are you able to connect any other Hak5 gear to your Cloud C2 server from the same network that is hosting the Screen Crab?
  3. Yes. The ATTACKMODE command supports spoofing multiple ID values including VID, PID, Manufacturer, and Serial Number.
  4. Too long, and that's my fault. I really need to find a scalable solution to this but thus far haven't.
  5. 2 TB - which AFAIK at time of writing are not commercially available yet. The Screen Crab features an SDXC card reader, which supports cards up to 2 TiB. I have had great experience with a Samsung Evo 512 GB card. That said, I cannot list every possible cards compatibility as I do not have access to them all for testing. In theory as long as they're all adhering to the spec, any SDXC card should work - but YMMV.
  6. Foxtrot will be releasing the new firmware early next week. In addition to fixing live recon, it also fixes reporting emails and openvpn crashes. Full details to come. Thanks again for all the valuable feedback
  7. Thanks everyone for the detailed bug reports. After investigating the issue, we were able to identify and reproduce the bug. Currently firmware v2.6.3 is being validated, and can confirm it fixes live recon. Once testing has completed, we'll get this published to downloads.hak5.org I really appreciate the reports and welcome any further constructive feedback. Thank you!
  8. I haven't had a chance to read this entire thread but I can respond to the OP and say, absolutely not, Hak5 is very much alive. I understand that we haven't put out many of our regular videos lately. Personally I've been taking a bit of a hiatus to restructure some things in my life that needed attention. With that said we have a lot of great programming right around the corner coming to the channel - some familiar faces, some new faces, and some fantastic shows all around. Stay tuned for a channel teaser in the next few weeks.
  9. Be sure that the WiFi Pineapple NANO is provided the requisite 9W of power. See the power consideration article at https://docs.hak5.org/hc/en-us/articles/360010471754-Power-Considerations Essentially, a typical 2A USB source will be adequate - but if an unpowered hub is used with other accessories attached, you'll experience reboots and/or boot loops if the device isn't adequately powered.
  10. The WiFi Pineapple TETRA requires 24W for normal stable operation. See the power considerations article at https://docs.hak5.org/hc/en-us/articles/360010471754-Power-Considerations While it can be operated from USB power, it would require both USB ports to be supplied 12W each (2.4A USB port) from either a single or two separate batteries to achieve this.
  11. The WiFi Pineapple TETRA will be back in stock in about a week or two. You can sign up to be notified when they're available again. We didn't anticipate the extended factory downtime post-Chinese New Year caused by COVID-19, which has caused disruption in our supply chain - especially to our tactical variants.
  12. It is possible to roll back the firmware. You can follow the instructions here https://docs.hak5.org/hc/en-us/articles/360025819673-Manual-Firmware-Installation If you're able to isolate the issue to firmware 2.6.2, please let us know and we'll see if there isn't a configuration change or dependency that has caused it to stop working.
  13. It looks like at first your eth1 interface is set to 172.16.42.42 (which is what the WiFi Pineapple expects for ICS), then moments later eth1 has an IP address of 172.16.42.170 - likely obtained from the WiFi Pineapple's DHCP server. This leads me to believe your Kali Linux system is configured in such a way that a service, like network manager, is attempting to obtain an IP address from DHCP, overriding the statically assigned IP address previously set. I recommend looking into any service that may be overriding this setting. I'll give it a spin with a fresh Kali Linux VM and see if I can rep
  14. Maybe I'm not understanding you properly, but the WiFi Pineapple is in itself a Linux computer with a web interface accessible from any modern browser. There isn't any desktop software to install on your host computer. You just connect to it via WiFi or Ethernet and open http://172.16.42.1:1471 on your browser. I've used my WiFi Pineapple NANO on my 16" Macbook Pro without any issue, and the same could be said for just about any modern OS.
  15. It should be back up on Google play in the next day or two. Sorry for the inconvenience!
  16. For the record, you don't need to perform a factory reset to make these changes. Just select the desired setting from the Filters page.
  17. I understand the frustration when something doesn't work as expected. I think it's important to understand what the WiFi Pineapple sets out to achieve, and where it allows users to leverage its capabilities. Since the beginning of this project we've been working hard at making the WiFi Pineapple a robust platform for WiFi pentests. Our focus is to provide a stable platform that makes the network and transport elements of a recon and rogue access point system simple, while providing an open API for developers to leverage our unique hardware. Because of this we've fostered a community
  18. If you haven't already, I advise reaching out to us directly - see https://shop.hak5.org/pages/support
  19. Adding any key combination is possible by editing the language file. Here's a quick how-to on adding CTRL-SHIFT-ENTER, as an example. 1. Download the official Hak5 JS Ducky Script encoder from https://downloads.hak5.org/ducky2. Download a keymap json file from the Hak5 github at https://github.com/hak5/bashbunny-payloads/tree/master/languages3. Edit the keyboard layout file downloaded in step 2 with a text editor and add the desired key map.For example:"CTRL-SHIFT-ENTER": "03,00,28",4. Save the modified keymap file5. Open the jsencoder.html file downloaded in step 1 from a browser6. Click
  20. It's difficult to say with certainty based on what you've said. It sounds like from what you've said that it hasn't crashed - it's still recording images locally. When the Screen Crab was connected to your Cloud C2 server, it would have reported its LAN IP address. Are you able to ping it on the same network?
  21. The power specifications for the Shark Jack is 2.5W (5V / 500mA). The charger you linked is out of spec and may damage the device.
  22. This can be done by using the MAN_ and SN_ options in ATTACKMODE. These were added in firmware v1.3 - see the changelog at https://downloads.hak5.org/bunny for usage.
  23. Thanks for the details. I can say with confidence that 800x600 isn't supported, however I am not 100% certain as to that odd 1360x768 resolution. I have a display I can test which outputs the more common 16:9 1366x768 - however I am unsure right now if I have something that'll do that resolution to test with. I'll check tonight when I get home. Just to validate that there isn't anything wrong with the device, can you test with a standard 1080p signal and verify that the LED goes blue when using the default image capture config.txt ? Thanks!
  24. @SuperSavvyTech you are correct that the battery should last some 10-15 minutes. This can be verified using a simple uptime payload similar to: while true; do uptime >> /root/loot/uptime.log; sleep 10; done I'm really sorry your Shark Jack battery isn't performing as expected. At the factory all Shark Jack devices undergo a burn-in test as part of the QA process whereby the battery is fully cycled before being charged to a level suitable for shipping. In the vast majority of cases this process identifies any underperforming batteries - which are then replaced. While a finite
  25. You are correct that you are seeing a NO SIGNAL light. If the Screen Crab doesn't think it is getting a video signal, my first place to look is at what video signal is passing through it and if it's a supported resolution.
×
×
  • Create New...