Jump to content

beginner123

Active Members
  • Posts

    29
  • Joined

  • Last visited

Everything posted by beginner123

  1. Would this allow me to sniff packets from the network it would connect to?
  2. What chipset is do I need? And how do I configure it to work?
  3. Is it possible to connect the Packet Squirrel to the internat via Wifi Adapter? I'm running the latest firmware (3.2)
  4. I ran according to what you told me with internet connectivity and opkg update and when I get to block info | grep "/dev/sd" Nothing is printed out, and when I run just block info This is the output Does this mean it's still not identifying the USB storage device?
  5. The Squirrel still isn't recognizing the USB even with the latest firmware..
  6. Ok, thank you I figured out how to connect it the C2, had to connect to the LAN through the other ethernet port on the Squirrel
  7. According to the Squirrel it is already connected to C2, but the in the C2 server it shows up as online and last seen never
  8. When I do this it still doesn't work. I got a new device.config and transferred it into the /etc directory on the squirrel, and still nothing. Also if I try to ping the IP address of the machine that the server is running on from the Squirrel it doesn't work
  9. Thats the way I was starting it... How do I do it if I want to run it on my local server and connect my Packet Squirrel to it?
  10. The C2 is located on my local server (local host 127.0.0.1) and when I ping it from the Squirrel it receives all the packets
  11. It was on version 1.0 while I was trying earlier, then I updated it and it still isn't recognizing the USB
  12. I am working with a packet squirrel and am trying to set it up in the C2 cloud. I moved the device.config file into the paket squirrel's /etc directory and it is still not showing up What am I missing?
  13. Ok, so do you think there is anything else I can do? I really appreciate all the help, thank you
  14. This is the output for ls /dev without the USB: Output of ls /dev with USB: This is giving me an error, saying the file/directory doesn't exist, both with USB and without
  15. I've tried it with a different USB, made sure to have at least one partition and checked that it is mounting to /mnt and still it is not showing up
  16. What is the solution for this? (Sorry I'm new to all this)
  17. The computer isn't recognizing the squirrel as an ethernet adapter and so nothing is getting routed through it. in terms of LED it starts blinking green then solid green then blinking blue for about two seconds and then finally slow blinking red (which from what I understood is FAIL)
  18. Whenever I try to connect my packet squirrel to the network to run the TCPDump payload, it never makes the connection and fails. In the "Available Networks" on my computer I see it trying to connect, it says "Identifying Network No Internet" then disappears without ever actually connecting. I plugged the ethernet cable on the power side to my computer and the ethernet on the USB side to the network switch. Maybe I am doing something wrong, I'm not sure If anyone can help that would be great
  19. Where can I create support tickets?
×
×
  • Create New...