ELPEPE

Thx this seemed to do the trick!

But if I go to the Advanced tab the SD-card shows up as swap storage. Here is a picture of my advanced tab https://imgur.com/a/6cr32RX

The output of the df -h is: Filesystem Size Used Available Use% Mounted on /dev/root 13.0M 13.0M 0 100% /rom tmpfs 29.1M 152.0K 28.9M 1% /tmp /dev/mtdblock3 1.3M 384.0K 896.0K 30% /overlay overlayfs:/overlay 1.3M 384.0K 896.0K 30% / tmpfs 512.0K 0 512.0K 0% /dev

This might sound very dumb but where do I need to put this command? I'm on a windows machine, do you mean the fstab text box?

Just some modules from the hak5 community repository. I can install the smaller ones on the internal storage of the pineapple Nano but larger files need to be installed on the SD card. The webpage says that I have the SD card installed but when i try to install a large module it says that I don't have enough storage and need to install a SD card.

I mean the modules im installing from the modules tab in the wifi pineapple web page (not the OpenWrt modules)

Hello everyone! I recently got my first wifi pineapple nano and tried to install some modules on a SanDisk 32gb SD-card. but if I try to install a large module the page says that I need to install a sd-card in order to install the module. I changed my fstab to this (saw it on another forum so i thought it worked but it didn't 😞 ) config global option anon_swap '0' option anon_mount '0' option auto_swap '1' option auto_mount '1' option delay_root '5' option check_fs '0' config mount option target '/ sd' option device '/ dev / sda1' option fstype 'auto' option options 'rw, sync' option enabled '1' config 'swap' option device '/ dev / sda2' option enabled '1' I tried formatting the SD-card through the GUI and factory reset once but with no succes all help is welcome! Thx in advance