Bodman

Thanks to both of you. my mistake was I didnt realise that it wouldnt DHCP on the ethernet port. Thanks again - i was pulling my hair out :) //Bod

Thanks for the reply Psychosis I downloaded the firmware from Digininjas site (http://www.digininja.org/files/jasager_firmware_1.0.tar.bz2). I extracted the 2 files using 7 ZIP then flashed them using ap51-flash-fonera-gui-1.0-38 but unfortunatly I still get the ip of 169.x.x.x If I use the files openwrt-atheros-2.6-root.squashfs and openwrt-atheros-2.6-vmlinux.lzma from the old 1.2 Package then the router assigns 192.168.1.1 and I can telnet etc. Any ideas //Bod

Hi, I had a FON which I sucessfully patched and installed Jasager1.2 I then tried to upgrade it to 2.1 but I have ran into some problems. after I patch the Kernel with mtd -e vmlinux.bin.l7 write openwrt-ar531x-2.4-vmlinux-CAMICIA.lzma vmlinux.bin.l7 reboot once it reboots I get a 169.x.x.x address and I cannot get back into it and so cannot install any apps (Jasager etc) I have tried going through the tutorial several times. I have found that if I use Freifunk Ap51 EasyFlash GUI utility and select external ROOTFS and KERNEL then I get a 192.168.1.X address and I can telnet then SSH back into the router. But once I start to patch the Kernel im back to 169.x.x.x and cannot access it again. I have tried setting a fixed IP on the PC of 192.168.1.150 but still the same error. I can get to to the stage where I have Webif installed. Any help would be greatly appreciated as im going around the bend :) //Bod