mianus230

The final hurdel for using ICS with wireless and TFPD32 in windows. (you should be able to make it work if you do what the first post says, and follow my advice on the ports you should use) to get this to work you need to do the following. I've spent all day working on this and this has got it to work. you must use subnet of 255.255.0.0 and keep address all the ip address low. 1. make the router connected to the internet via wireless how an ip range of 192.168.2.1/254. (make sure you have the ip and dns to automatic) (in vista/win7 disable ipv6, and only mess with the tcp-ip for ipv4) 2. Make the lapton lan ip range 192.168.0.1/254, this way ICS will have the 192.168.1.1/254 range. (make sure to leave the deafault gateway blank and to use 192.168.0.1 for the lan ip, subnet 255.255.255.0. ) 3. When all ranges and subnet match, you can log back into the webif. Tfpd setup 4. I also have tfpd32 running on the laptop connected to the fon and the internet it has the following settings. a. server interface is 192.168.2.7 (this will match the ip that your wireless card will give you after you connect and have internet) b. wins/dns server is set to the deafult gateway for the lan (for the dhcp server, in my case 192.168.0.1) c. the net mask is set to 255.255.255.0, so it is the subnet mask. -to get to the jasager interface. (use firefox ) webif= 192.168.0.250 jasager=192.168.0.250:1471 Karma =192.168.0.250:1471 and turn on . The I think that the reason that Darren setup worked with ICS, while using 192.168.1.250 in the webif/network setup page, instead of what 192.168.0.250 that you have to use if you are going to be connected to a wireless router, not a blackberry connecting, which i think acts like a modem possibly making the 192.168.0.1 ICS limitation in windows not a restriction. The picture illustrates what the network map looks like on the computer you are connecting to karma with. ie the mark computer that is getting it's internet from the fon router. leave the default gateway and the dns server blank. That information will be provided by the dhcd server. leave it up to tdtpd, so you can control it.