newgeneration

ok tnx for the info. But even with the option turned on it does not work .. :(

I enabled it and still the same... Also why would a user enable such an option? (on the encrypted networks the option was enabled by default. Only the access points without encryption had it off)

My experimental xp has a wireless unsecured network saved on the top of the list (I guess that means to which network it will connect if he finds a couple familiar). There is also an option where it says "connect even if it is not broadcasting" (or something similar). this option is turned off (Why would anyone enable that option?). I dont remember an "always connect to this unsecure network" option, but I will look at it again tomorrow and post. Thanks for your replies

Hello, I just found some time to experiment with the pineapple... I have purchased the second version and followed this guide ( http://karmetasploit.com/archives/55 ) to configure it. Everything works fine (it has internet connection when a client connects to it), but in the client (xp) do not show up the wireless access points it has saved (with no encryption). In other words, it does not do, what its main feature should be. Can enybody help? Thanks in adnvance (Sorry for my bad English)

Thanks a lot ;)

When a client tries to connect to the ap doesn't it sent the password? the jasager could just accept it (just asking, I dont really know how the connection client-ap works. Just curius if something like this is possible. Sorry for the bad english ;))

Yes it works when the victim has as a favorite an unencrypted network, but wouldn't it be great if this would also work with encrypted wlans? the jasager could generate 'fake' access points with all encryption method. So it would for example have 4 'fake' access points with the same ssid but with different encryptions (unencrypted, wep, wpa, wpa2) so that the victim could connect to the jasager even if his favorites are encrypted ones.

Ok, thanks a lot, will add an unencrypted favorite and test it out ;)

No, must a favorite be unencrypted so that jasager will show it?

Hello, I bought some time ago a wifi pineapple version2 from the hak5 store. I followed the guide at http://karmetasploit.com/archives/55 to share internet from my laptop running backtrack to the jasager. Then I powered up a windows machine and I just see the ssid 'pineapple' (when I connect to it, I can browse the web), but no 'fake favorites. What am I doing wrong. Thanks in advance!

ok :(

I did not connect it to the internet,I followed darens steps untill the flushing.... It does show: Reading image file J:\Fon Plus\Jasager 1.0\openwrt-atheros-root.squashfs with 2359296 bytes, rounded to 0x00240000 Reading image file J:\Fon Plus\Jasager 1.0\openwrt-atheros-vmlinux.lzma with 720896 bytes, rounded to 0x000b0000 No packet. No packet. No packet. Non arp received. Make sure, the device is connected directly! Non arp received. Make sure, the device is connected directly! Non arp received. Make sure, the device is connected directly! Non arp received. Make sure, the device is connected directly! Non arp received. Make sure, the device is connected directly! Non arp received. Make sure, the device is connected directly! Non arp received. Make sure, the device is connected directly! Non arp received. Make sure, the device is connected directly! Non arp received. Make sure, the device is connected directly! Non arp received. Make sure, the device is connected directly! Non arp received. Make sure, the device is connected directly! Non arp received. Make sure, the device is connected directly! Non arp received. Make sure, the device is connected directly! Non arp received. Make sure, the device is connected directly! No packet. And then is has some ip's, like client ip a mac adress and another ip I think, but then nothing happens... Its the fon 2100.. Could it be that I had already an newer version tha alowed? (0.7.1 r1)

When u connected the fon before flashing to you pc, what ip did your computer show up?

I tried it again with an updated version of pcap, but nothing.. the programs stucks there, where is says Ip:192.168.1.0 (I have also tried to manually set the ip of the pc.. but the result is the same...) I dont know what else to do... ( Ich spreche auch deutsch :))

Pcap was installed.. Yeah, I used tha program..... Will try to reinstall of programs needed.. But i think that there is no problems with the drivers-programs.. Anyway, tnx mate.. Will tell u in 1-2 days how it worked out (because I have to do a lot these days and I dont know if I will find time) ;) And yeah was planning to build something like an serial Adapter, or howevers this is called (sorry for my English) :)

ok, so from what is see after configuring manual the ip of mine (to 192.168.1.2 with the correct Subnetmask) the fonera connects to the pc normaly (as if I had internet, 100.0Mbit/sec) I then tried the programm u said but after displaying: Your ip: 192.168.1.0 It does noyhing :(.. Any suggestions??

Tnx!!! will try it!

Hi, I just bought a fon ( i know.. I am a late buyer :) ).. Its the fon 2100 Firmware: 0.7.0 r3 (It is below 0.7.1 r1, ist it??) I followed the guide: http://wiki.hak5.org/wiki/Fon_Jasager_Install. But after I have done step 11 I try to connect the fon with my pc via ethernet, but the ip that shows up is Connection-specific DNS Suffix . : Link-local IPv6 Address . . . . . : xxxxxxxxxxxxxxxxxxxxxxx Autoconfiguration IPv4 Address. . : 169.254.36.225 Subnet Mask . . . . . . . . . . . : 255.255.0.0 Default Gateway . . . . . . . . . : 0.0.0.0 Why is the ip 169.254.36.225?? I tested it with my laptop too.. (windows7 and xp).. the same... Is is ok, is it wrong.. When I saw the ip I just went WT***?? Can enyone help me plz?? :)