Listening

Ok, here's where i'm a little confused. Please excuse me if i sound like a NOOB. In Darren's post, ICS Via Jasager, he talks about using the OpenWRT configuration to set some parameters. When I was talking about graphs, this is what i was talking about. The OpenWRT pages. I don't have them probably because i used the wrong firmware. So I know I have Jasager v2 on the router, and I have OpenWRT Kamikaze 8.09, BusyBox v.1.11.2 on my FON. So, here's my lame question. Is there an easy way to simply add the missing pages of OpenWRT or do I have to load a different firmware version? Thanks for your help! :)

Ok, so I to break down and ask for help. Here's my situation. OK, so I thought i too bricked my FON router. I had to abruptly stop in the middle of my modding process- , and it was extremely hard to get back up and working. So digging through some of the forums, I was able to get my Jasager up and working or so I thought. Here's what I did. - I set my IP address of my Local Area Connection to 192.168.1.22. - I found that I wasn't able to ping 192.168.1.1, but I was however able to ping 192.168.1.254. When I ran NMAP against it, the only port that it showed was TCP 9000. - I downloaded: Freifunk Ap51 EasyFlash GUI utility openwrt-atheros-2.6-vmlinux.lzma and openwrt-atheros-2.6-root.squashfs - Unplugged my FON. - Opened Freifunk, and loaded the the two files listed above. Hit GO! - Plugged back in the FON router, and waited. It started connecting and then showed me that it flashing ok. When the FON came up, i was able to successfully get to http://192.168.1.1 and see the Jasager / Karma page. The one thing i did see kinda weird is that I couldn't see any of the additional pages that Darren spoke about, Graphs, Status or anything for that matter. So I'm wondering, am i missing something on the router? The other problem i'm seeing is, i only see the OpenWrt SSID, nothing else. My devices don't seem to automatically connect to anything. I've turned Karma on, and still no go. So 1st, thanks for taking the time to read through all of this. I appreciate any help anyone can give.

OK, so I thought i too bricked my fon router. I had to abruptly stop in the middle of my firmware flashing, and it was extremely hard to get back up and working. So digging through some of the forums, I was able to get my Jasager up and working. :) Here's what I did. I set my IP address of my Local Area Connection to 192.168.1.22. I found that I wasn't able to ping 192.168.1.1, but I was however able to ping 192.168.1.254. When I ran NMAP against it, the only port that it showed was TCP 9000. I downloaded: Freifunk Ap51 EasyFlash GUI utility openwrt-atheros-2.6-vmlinux.lzma and openwrt-atheros-2.6-root.squashfs Unplug your router. Open Freifunk, and load the the two files listed below. Hit GO! Now plug back in your FON router, and wait. It should start connecting and then show you are flashing. Give that a shot, it worked for me.