Jump to content


Active Members
  • Posts

  • Joined

  • Last visited

Everything posted by Jonny190

  1. My duck encoder 2.6 wont encode the "|" sybbol correctly, im in the uk but ive also tried the us language as well but when the duck is entering the symbol its displays empty in uk and as a "^" in us and help would be great
  2. How would i start the dhcp because i cannot see a dhcpd in the init.d
  3. as for dhcp i thought it started with init.d/jasager and for php 1 added *.php:/usr/bin/php to /etc/httpd.conf after installing the packages and restarted httpd service
  4. I have a fonera 2201c uk with jasager installed when i start it up it cannot find the interface and then cannot hand out any ip's, i am also having problems running php i just get offered to download the php file =(
  5. just notice that my power led remains orange if this help's anything... and was it possibly a FTDI
  6. I have the same hardware knowledge so far that's what i have been using "a standard serial cable" so now the trick part trying to get that magical 3V, i haven't got the foggiest how hmmmmmmmm
  7. I've tried both serial before boot and once booted, under Linux i can get it to output constant hex code but that's the best i can get :( it is right the i am using a rs232 DB9 cable 2 RX (Receive Data) 3 TX (Transmit Data) 5 GND (Signal Ground) or is there a need for a rs232 ttl eg.MAX232CPE RS-232 Transmitter/Receiver
  8. I'm on the same firmware and I'm having the same problem. if i wire the pins backward i get garbage but wired correctly i get no display in both linux and windows using on board and usb serial adapters. i can still access the device normally i just have no serial if i bridge Tx and Rx i get a echo back on me computer. any ideas thanks
  9. I am using 2 512Mb 9600GT's they have 4 dvi outputs between them, i need help configuring Xorg.conf my current xorg.conf is # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 1.0 (buildmeister@builder63) Fri Aug 14 17:54:58 PDT 2009 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" HorizSync 28.0 - 33.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" BusID "PCI:8:0:0" Driver "nvidia" VendorName "NVIDIA Corporation" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Thanks
  10. i have found a simmilar project at geekmyride but i cannot find any code or wiring diagrams to follow
  11. i like that idea but i would prefere to keep it on the arduino idea as i have a few of them around my room that my m8 gave my to try and get me in to programming(not that it worked).
  12. i was planning on using 802.11n to create a radious 2 access point with mac filtering because of the great range. then i could use my ipod touch as the end device, i have a wiring diagram for my car's igntition system all as i need is a device that i can use as a analouge switch via usb
  13. i have a mini pc in my car running ubuntu and i need help deciding on a way to start the car using a web server. The device is constantly powered on but has a low power consumption and has a spec of: WI-FI 802.11N 4 usb 2.0 1.6 intel atom 2GB DDR2 ram 500gb HDD slimline dvd 1 gigabit ethernet usb fm tuner 7" touch screen vga headunit i am no programming guru and a linux N00B it is running as stock ubuntu with only my media libary loaded please help me i was thinking of modifying the design of the hak5 rover but it is not yet finished. Just a thought
  14. for a easily configured firewall i am talking drag and drop simple astaro is the most effective for a home user :D
  15. If you are going to go for a hardware firewall try to pick up a cheap pc and get astaro security gateway for home user
  16. if it is for home use i would definitly recomend astaro security gateway out of all linux firewalls i have had smoothwall, ip cop, untangle, etc. my favorite as far as configuration and managment astaaro is the way forward
  17. Seems goot under xp sp3 but vista causes a problem by the uca
  18. Just as a helping hand for default bios passwords for what it is worth ;)
  19. COD5 the online play is intense and then there is the zombies my god the game that keeps on givin
  20. Jonny190

    COD 4 vs. COD 5

    Cod5 hands down i only have it for 360 but it is so kick ass my fav's are the zombie levels it is just so annoying when you finally get over run
  21. Hak5 seems good cod5 on 360 only allows 4 letters or numbers
  22. could we not have a UT2004 server with Mr. Pants, Excessive Overkill it is truly overkill UT2004 is my playground and home away from home :P
  23. i still prefere UT2004 with Mr. Pants, Excessive Overkill it is truly overkill
  24. nerd-gasm nerd-porn geek-porn thay all point to some good hardware this being one of the best i still enjoy my Xpressar
  • Create New...