Jonny190
Active Members-
Posts
33 -
Joined
-
Last visited
Jonny190's Achievements
Newbie (1/14)
-
How would i start the dhcp because i cannot see a dhcpd in the init.d
-
as for dhcp i thought it started with init.d/jasager and for php 1 added *.php:/usr/bin/php to /etc/httpd.conf after installing the packages and restarted httpd service
-
I have a fonera 2201c uk with jasager installed when i start it up it cannot find the interface and then cannot hand out any ip's, i am also having problems running php i just get offered to download the php file =(
-
Jasager on the UK Fon+ in Windows XP
Jonny190 replied to veyron's topic in WiFi Pineapples Mark I, II, III
just notice that my power led remains orange if this help's anything... and was it possibly a FTDI -
Jasager on the UK Fon+ in Windows XP
Jonny190 replied to veyron's topic in WiFi Pineapples Mark I, II, III
I have the same hardware knowledge so far that's what i have been using "a standard serial cable" so now the trick part trying to get that magical 3V, i haven't got the foggiest how hmmmmmmmm -
Jasager on the UK Fon+ in Windows XP
Jonny190 replied to veyron's topic in WiFi Pineapples Mark I, II, III
I've tried both serial before boot and once booted, under Linux i can get it to output constant hex code but that's the best i can get :( it is right the i am using a rs232 DB9 cable 2 RX (Receive Data) 3 TX (Transmit Data) 5 GND (Signal Ground) or is there a need for a rs232 ttl eg.MAX232CPE RS-232 Transmitter/Receiver -
Jasager on the UK Fon+ in Windows XP
Jonny190 replied to veyron's topic in WiFi Pineapples Mark I, II, III
I'm on the same firmware and I'm having the same problem. if i wire the pins backward i get garbage but wired correctly i get no display in both linux and windows using on board and usb serial adapters. i can still access the device normally i just have no serial if i bridge Tx and Rx i get a echo back on me computer. any ideas thanks -
I am using 2 512Mb 9600GT's they have 4 dvi outputs between them, i need help configuring Xorg.conf my current xorg.conf is # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 1.0 (buildmeister@builder63) Fri Aug 14 17:54:58 PDT 2009 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" HorizSync 28.0 - 33.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" BusID "PCI:8:0:0" Driver "nvidia" VendorName "NVIDIA Corporation" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Thanks
-
i have found a simmilar project at geekmyride but i cannot find any code or wiring diagrams to follow
-
i like that idea but i would prefere to keep it on the arduino idea as i have a few of them around my room that my m8 gave my to try and get me in to programming(not that it worked).
-
i was planning on using 802.11n to create a radious 2 access point with mac filtering because of the great range. then i could use my ipod touch as the end device, i have a wiring diagram for my car's igntition system all as i need is a device that i can use as a analouge switch via usb
-
i have a mini pc in my car running ubuntu and i need help deciding on a way to start the car using a web server. The device is constantly powered on but has a low power consumption and has a spec of: WI-FI 802.11N 4 usb 2.0 1.6 intel atom 2GB DDR2 ram 500gb HDD slimline dvd 1 gigabit ethernet usb fm tuner 7" touch screen vga headunit i am no programming guru and a linux N00B it is running as stock ubuntu with only my media libary loaded please help me i was thinking of modifying the design of the hak5 rover but it is not yet finished. Just a thought
-
for a easily configured firewall i am talking drag and drop simple astaro is the most effective for a home user :D