Jump to content


Active Members
  • Posts

  • Joined

  • Last visited

Everything posted by Keltha

  1. Electrical grounding is a must, if the new case is metal, it MUST be grounded properly. You could probably skimp a little on the airflow as you're probably not going to be using that much power, but make sure air can flow in and out.
  2. An amplifier on the transmitting side will not add any appreciable noise and will increase the signal strength. I would not reccomend a very high gain antenna on the transmitter because they tend to be directional, which would be useless to you.
  3. I think reducing the accuracy of the time from seconds to maybe every 10 seconds would be a good idea, also try appending a salt to the time before hashing it.
  4. Nothing that has to do with the CPU, without details on exactly what he's doing, i'm gonna assume its his connection speed.
  5. seeing as it's no really breaking a sweat i doubt a multi-threaded version would help. You're being limited by something else that isn't your CPU.
  6. Keltha

    Hacking WoW

    I highly doubt the password is sent in plaintext lopez
  7. As you're using it to connect guest laptops, amplifying it will probably have no effect whatsoever
  8. I'm curious to know how you booted him off shonen, ARP poison to nowhere, DHCP poisoning?
  9. Only possible solution i can see if they're using a system that isn't a complete piece of crap is to have a server on the other side that you own. If it is a complete piece of crap all you have to do is change the port that bit-torrent uses to 80, you cannot fool the router, if it thinks you're connecting on port 80, it will send everything to port 80. There's a reason why they block bit-torrent, you're sharing an internet connection with everyone else.
  10. Various manufacturers sell access points that use frequencies other than that of the Wi-Fi standard, such as Ubiquiti. Just use one of those instead, they won't be able to detect it unless they are searching for these APs specifically,also, if you have time to plug the phone in and manage to hide it with a Ethernet and power cable trailing out of it, you probably have enough time to install something
  11. I can't help but correct you on this, but firewire is nowhere near being considered a high speed bus, topping at around 900 Mbits. Its slower than PCI, which is still nowhere fast enough to share system resources
  12. "school assignment" "breaking this MD5 hash" "credit in my class for your amazing skills " Honestly? If you want help, you don't need to lie about it.
  13. Wiretapping using EMI is possible, but if you can get close enough to use EMI without spending hundreds in equipment, you could probably just splice the cable
  14. As long as the specs are similar (current handling and other things) it should be fine
  15. You can't buffer overflow the audio in because the analog to digital converter physically can't output values large/long enough to overflow. I might be wrong tho, my knowledge of buffer overflows isn't that great.
  16. Oh, whoops, I misread his post and thought he was asking it the other way around. My bad
  17. Can't be exactly sure without the schematics, but i highly doubt it
  18. By using both a hub and wire splicing it can be done. Get 2 extra Ethernet jacks/plugs and connect the TX lines from the wire to the TX pins of one jack/plug. After that, connect the RX pins from the wire to the TX pins of the other jack/plug. Then connect the two jacks to a hub and plug your sniffer into it. There should be no difference in speed, but there still is that bandwidth problem. This is the only solution that currently comes to mind, so you're just gonna have to deal with it
  19. I'm with H@L0_F00 on this one too, there is no legitimate reason why you would need admin
  20. Imagine the horror when the nanny picks up the stuffed animal, look into its eyes, and realizes its a camera
  21. Regarding the capacitor materials, i don't think tantalum would be suitable as some are polarized , the oil capacitors should be alright tho. Capacitors values have a pretty large effect on the synth sound, but i don't think its going to stop it from working, to be safe trying combining caps to get the right values
  22. Sparda is right needing a private key is like being able to crack a password as long as you enter the password
  23. I meant that all you need to do is replace the circuit inside with a countdown timer that you can set to whatever you want. what i meant by that it is based on the parking lot enforcer, is that their is no authentication or anything, all they base this on is that the enforcer just sees something that is counting down
  24. @metatron He doesn't want a repeater, i think he wants to transmit his own video You can't transmit video using the same system as the satellites which is APT (http://en.wikipedia.org/wiki/Automatic_Picture_Transmission) but there is Amateur Television (http://en.wikipedia.org/wiki/Amateur_television) just do some googling and you should find the resources you need
  25. IMO , you should just gut it and replace the circuitry with your own It seems like it is all based on the parking lot enforcer
  • Create New...