Jump to content

DoDg3

Active Members
  • Posts

    15
  • Joined

  • Last visited

Everything posted by DoDg3

  1. Found this whilst googlewacking Fon Cable Pin Out
  2. Port Remapper I believe people have used it to bypass similar firewall rulls for IRC etc. http://www.analogx.com/contents/download/network/pmapper.htm
  3. The customiser does allow for other iso and auto resizes the U3 partition. I've tried booting with a few different distro's but get a boot error after the initial loading screens. At the moment I have a 5 in 1 XP installer iso, it loads from in Windows but havent tried loading/ installing from boot. The software link I posted has an all in 1 USB compatibilty checker and CD partiton install. So you may get older non U3 devices working with switchblades.
  4. Found this on one of my google adventures, not sure if it has been posted before but it look pretty useful. USB CD Partition Creation Utility
  5. Never used Pro Rat, Optix Pro was always a favorite of mine. Still use it to control some remote pc's. You might also want to check out Bifrose a reverse connecting trojan.
  6. I concure, It is so much easy to run a standard arp poisoning attack. If the network is open just jump on and your away. I suppose the difference would be if there was multiple open AP, you wouldnt be able to connect to them all unless you had multi wifi adapters.
  7. So far this is the only way I can get the internet to share to the clients. Having difficulty setting up a dhcp server for some unknown reason tftpd keeps changing to my main device. This is my setup that sometimes works!! Fon - 192.168.0.101 (DHCP) (ESSID - Pineapple) 2nd Wifi - 192.168.0.1 (connects to Pineapple, Pineapple added to Blacklist) ICS Wifi - 192.168.1.65 (Connected to Internet Gateway) -------------------------------------------------------------------- I would to recreate how Darren's setup during episode 412 but just cannot for life of me get a DHCP server working. Fon - 192.168.0.101 (DHCP) (ESSID - Pineapple) 2nd Ethernet - 192.168.0.1 (connects directly to FON via ethernet). ICS Wifi - 192.168.1.65 The DHCP from the ICS is crap, tried TFTPD and do not get any response because im sure it keeps defaulting back to 192.168.1.65. At the moment it seems the FON is unstable and unusable in field use.
  8. Hi there, I had the exact same issues, I hooked up a dual USB lead to power the fon. The wifi signal increased but it was still unstable and dropped both ethernet and wifi connections.
  9. I too would like to see the setup Darren has with TFTP as the DHCP server keeps trying to assign IP's on a different NIC not chosen by TFTP.
  10. ok all tested, 1 usb lead powers it ok but does not feed 2 wifi connections. ie. 1x ICS and 1x Mark Adding 2nd male usb to the power cable seems to have increased strength of radio and stability of the device.
  11. Is there a way of adding a sd card slot/ female usb (for external hdd) to the fon so as to allow more storage for apps/ logs?
  12. Right well it seems to me that lack of power through usb is the issue. Im going to make up another usb cable with 2 male connectors. Results up whe i'm done 2morrow. peace
  13. Recieved my fon last week, it came with the 2 pin plug so no good for me here in the UK. Made myself a USB power lead, this works fine and all interfaces work great. I do however get the odd drop out of dhcp assignment and ics sharing to marks machine. Has anyone else experienced this and if so what was the fix.
  14. Sounds like the Evil Eye Software Optix Pro RAT
×
×
  • Create New...