-
Posts
53 -
Joined
-
Last visited
-
Days Won
1
Posts posted by Bitstream
-
-
There are no additional charges.
Also I'm very surprised to hear how many people didn't get the initial email. I'll be mocking this scenario up again with a test product and a few accounts myself and see if I can't reproduce it. Thus far shopify has been pretty good to us in the email department.
I got the order confirmation email on 12/31/15 and then the shipped email this afternoon and that has been all I have seen with regard to the Tetra.
-
Got it to work Cozmo on fw 2.0.3 by editing /etc/chatscripts/evdo.chat and changing the line that says ATDT#777 to ATDT*9***3#
-
Why isn't Autostart already in the firmware for SSH on the MkV? It was present on older versions of the MkIV.
-
That is a great idea. I get frustrated waiting for all the tiles to load on the main page, especially for infusions I use infrequently but still want to keep installed.
-
There were no instructions with it and the whole thing looks very... homemade. Like, airport-security-might-be-suspicious-of-it level of homemade. ;-)
The instructions for both battery packs are in the booklet that comes with the Mk V.
-
Were you ever able to get this to work?
Not directly into the mk iv...I have it hooked into a tp-link tl-mr3020 that is connected to the mk iv via the wan port. Setup some iptables rules and use it that way.
-
Ummm...you ARE SSH'ed into it...
-
The bottom of the configuration page for the mobile setup says to go to wifipineapple.com/modems for help and that in turn goes to wifipineapple.com/index.php?mobile but it is just the normal index page. Where is the help file for adding a modem to 3.0.0? I've seen github.com/WiFiPineapple/web-interface/wiki/mk4guide3gmodem but was wanting to see the list of 300 that are now supported to see if mine is one of them.
-
After I moved away from the Cruzer Fit I have not had any issues with the flash drive I use now.
-
have you powered the hub with a battery pack? did you have to make your own cable to get from usb to barrel connector?
i'm considering getting the F5U404PBLK with an anker astro2 8400mah
Yes, I power it from a battery pack all the time. It came with the correct usb cable.
-
The Belken F5U404PBLK doesn't appear to be a powered hub so there would not be a feedback issue. The only reason I wanted a powered hub was to help power a bigger USB drive, 8Gig, that works when using the power adapter on the pineapple but not when using my battery pack. I may give it a shot though...
Yes, it is powered and it is the one I use with no problems whatsoever.
-
Hi. If I'm using a relay server that uses non-standard ssh port, how does it work. My server has ssh port on 45678. The standard autossh command, "autossh -M 20000 -N -R 4255:localhost:22 user@server.com -i /etc/dropbear/id_rsa" doesn't work. Before I changed the ssh port, it worked fine, but too many break-in attempt with port 22. I tried adding -o "Port 45678" to the command, but didn't work. Any tips?
Use "autossh -M 20000 -f -N -R 4255:localhost:22 user@server.com -p 45678 -i /etc/dropbear/id_rsa"
-
I vote for 1471
-
ieathacker4lunch
FREE Jackalope
getyourown
Mellow Mushroom
dontstealmynet
poopoo
down like the economy
Get Down With The Get Down
Anything Goes With Glass
Not Your Philly Cheese
BAD JUJU so go away
dixie whorehouse
Saw these today:
................................ (Yes, that was the SSID)
jesus wouldnt steal
LETMEBEWITHYOU_Network
UNSPECIFIED
Don't Even Try.
cherrylicous
-
I had the same issue with a few 16GB Sandisk Cruzer Fits...finally switched over to a different brand and have thus far not had any issues over the last couple of months.
-
-
i have done a little digging and found out that i have a bad supperblock, now im trying to fix it and recover all my file then i will try a different drive? If anyone has any ideas of what keeps causing it please let me know. Of if you have found an easy fix for it.
Update: I was able to recover the files using "test-disk", will try to reformat it and have a backup ready.
Interesting as nothing, including test-disk, worked for me.
-
Ok has anyone had this problem, My sandisk 4 gig randomly goes in to read only, this has happened with several san disk dongles and im tired of buying new ones is there a fix for it? when i bring it up i can see the sda1 sda2 partitions in dev when i try to read from them there is nothing there could it be a bad supperblock? I have tried changing the permissions on both partitions to no avail. If anyone has had this problem and has a fix for it let me know please.
I have had two 16gb sandisk cruzer fit's do the same thing. I had them replace the first one under warranty. I haven't tried to get the second one replaced under warranty yet as I really just don't trust these flash drives any longer. I had a spare 2gb lexar hanging around which is what I use now...
-
I find if i use too many memory intensive programs at once, and the free memory drops below 1k, it will crash on me. Mainly happens with the Jammer module, when there is more than 6ish networks. Also, it seems the pineapple doesn't use any of my swap :/ 100% free all the time, even with the swappiness set to 100.
Thanks for the reply. I am still trying to isolate the cause.
-
Was it well ventilated, or did you have it hidden somwhere it coud not breathe? Was it Hot?
It was in a Maxpedition Jumbo VersiPack but it was not hot at all...I have used it in a closed Pelican case before and likewise it stayed cool in it also (and never randomly rebooted)
-
dumb question how much of the drive is free?
1.2gb
-
were you using sslstrip? 3g? is there swap space on the usb?
Yeah, I had sslstrip and tcpdump both running...also had 4g going...usbstick is a 2gb with ~600mb for swap (got tired of trying 16gb cruzer fit's as they all eventually went into read-only mode and i had the 2gb laying around doing nothing...it has been working fine for quite awhile now) Whenever I would look it was not using a ton of the swap space...
-
Anybody had the issue of their MkIV randomly rebooting? I am still running 2.3.1 but it randomly rebooted twice today while I was on a pentest.
-
I have 2 MKIV's, both running 2.3.1 firmware. I've only setup 1 cruzer for swap when I got the first pineapple. Anyway, I just attempted to use the cruzer on the 2nd pineapple and it wouldn't boot. Just flashing WPS button. So I unplugged the first pineapple, put in the cruzer and rebooted, and now IT is has a flashing WPS button.
I can take it out, reboot, and everything is fine, but is that right? Why can't I use the same usb drive on 2 diff pineapples? And why, oh why, does it not work on the pineapple I originally set it up for?
Last but not least, I am having issues getting gparted to see the cruzer. I thought I'd re-format the thing and try over. Any ideas? I am such a noob =(
Check and see if you can actually write to the cruzer...I have had 2 16gb cruzer fit's go belly up for no apparent reason.
Shipping Delay for WiFi Pineapple TETRA
in WiFi Pineapple TETRA
Posted
Mine should of been here today but no joy