Jump to content

All Activity

This stream auto-updates     

  1. Past hour
  2. Which hardware are you refering to and can you link to the rom.
  3. I tried using the default upgrade process to install a custom ROM I built using the OpenWRT Image Builder, since I found the Reference Board used by Packet Squirrel in the options to build to. Now it won't start at all. A simple flash in the LED when I plug it in is all I get. Did I brick this device?
  4. Today
  5. I tried using the default upgrade process to install a custom ROM I built using the OpenWRT Image Builder, since I found the Reference Board used by Packet Squirrel i the options to build to. Now it won't start at all. A simple flash in the LED when I plug it in is all I get. Did I brick this device?
  6. I have considered creating a custom built ROM for this device using the OpenWRT Image Builder, because I want to use StrongSwan instead of OpenVPN. Is upgrading to a custom built image possible, or are we only able to use that which the Hak5 Team has created? If upgrading to custom ROM is possible, what install steps are different from the default upgrade process?
  7. Hi. I connecting the PineApple Tetra un My Kali Linux. But only has a connect when I connect un wireless network. For the eth1 not has a connection never. Only un my phone. Help me please.
  8. Pale Emp1re There is a factory reset doc located at https://docs.hak5.org/hc/en-us/categories/360000979313-LAN-Turtle with the other docs. It is easy to reset. Just make sure you download the factory recovery firmware and not the the standard build. Also on my Turtle 3G the reset button was on the other side from the pictures in the manual but still worked as documented. Hope it helps.
  9. I'm not trying to be vague. I simply don't want to be hold responsible for people bricking their devices. Download/transfer the IPK-file from my repo to your Pineapple. SSH/SCP/wget, whatever works best for you. SSH to the Pineapple and run the command below within the same directory you downloaded/transferred the file to. opkg update ; opkg install sslsplit_0.5.5-1_mips_24kc.ipk -d sd There's no prerequisites, except having an active internet connection on the Pineapple while installing. This is not a part of the official module which you can download on the Pineapple, but you should be able to use the module with this package. When i get time, i'll create a fork of the official Module, so that people not experienced with this stuff can use it to setup everything via the Module GUI.
  10. Hi, This is a 'very newbe' question. I have setup the Nano. I created an SSID "free_Wifi" under networking - open SSID. Hide Open SSID is not checked. I can see the SSID with another device (Huawei phone) but I can not connect. "network access denied". I tried forget this network and connect again but same result. What am I doing wrong? thanks in advance for your help. Cees
  11. make sure your network is only a 2.5ghz network . I have deauthed devices capable of using 2.5 Ghz and 5 Ghz, and because the router was broadcasting both bands from what I could see the only thing that happened was the deauthed 2.5 Ghz connected device just moved to the 5 Ghz network (depending on signal strength to the 5 Ghz network). Other things i have noticed that helped was to increase the deauth packets being sent when using a deauth script or sending deauth packets to a client. Unless of course you have setup your pineapple to work off both bands based on what you are trying to do . Which i wont say you can or cant do because its possible but im feeling like your thinking ( i deauthed this device it should be unable to connect ) . Sometimes i would send deauths that were not so aggressive ( less packets ) but the device would disconnect and reconnect so quickly, i never saw much other than the device just being connected the whole time. Other times ive deauthed devices within close proximity with no prob. and same amount of packets being sent per second .
  12. IDK maybe im just on that tired asf and retard feeling atm? Excuse my tone or perceived tones, but nothing makes me more twisted than replies that do nothing but give vague responses to others, whom are clearly trying to learn. Some persons, whom also clearly show their English isnt as up to par as others.
  13. i have tried the said above commands and maybe its because im dead tired or a few shots after work idk . said post above gives command without quotes "opkg update ; opkg install sslsplit_0.5.5-1_mips_24kc.ipk -d sd" prior to the command instructions it only says to download the .ipk file from repo " to your pineapple" does not specify a directory or media. This method is extremely capable to work, but lack of proper instruction, or time to give quality instruction does not exist . Yes this may be a method that works, but your instruction is as good as a guy waving hands at a distance in a loud ass room with a million production machines running at 130 dB noise level, with onlookers trying to decipher the message as to what he wants . Not trying to be a ass, but you do not include certain steps required for others to reproduce and reap such lovely benefits such as yourself. Which further makes some users trying to learn certain things or " your method " have a harder time and give up easily. Other answers that include more "I know how to do this" attitudes, but say nothing more than "use the search feature on a forum", do not contribute to anything other than further confusion and let downs with many other users and their possible abilities as a person. We are dealing with something that transitions to many basic flavors of linux, but we can all agree the flavor and commands can be different. Things become even more confusing when you have a user that has spent money on this product trying to learn, but they are only familiar with a Windows or Mac environment. Many have hopes and dreams for the NANO or TETRA, but when such vague instruction is given things are easily; Lost, Forgotten, Given-up On, Etc. Not trying to flame, but sometimes i feel like even though i understand what some of you are replying about. The answers given are like a "go and look at the dictionary n00b" response. Below is my evening trying to get this to work from 3am till 730am, im sorry if ive come off as dickheadish, but as you can see from login via ssh ive had nothing but issues . my pineapple shows connected to my network ... via gui i can update or download modules that currently work... i can update and upgrade via opkg thru ssh... i have placed the .ipk in differant dir and tried to create installs or configures to the hilt . Maybe im missing something simple idk, but a prerequisite note on what was possibly needed beforehand was also not included on that note . [sudo] password for nickelz34: ┌─[root@parrot]─[/home/nickelz34] └──╼ #cd / ┌─[root@parrot]─[/] └──╼ #ssh @ 172.16.42.1 usage: ssh [-46AaCfGgKkMNnqsTtVvXxYy] [-B bind_interface] [-b bind_address] [-c cipher_spec] [-D [bind_address:]port] [-E log_file] [-e escape_char] [-F configfile] [-I pkcs11] [-i identity_file] [-J [user@]host[:port]] [-L address] [-l login_name] [-m mac_spec] [-O ctl_cmd] [-o option] [-p port] [-Q query_option] [-R address] [-S ctl_path] [-W host:port] [-w local_tun[:remote_tun]] destination [command] ┌─[✗]─[root@parrot]─[/] └──╼ #ssh@172.16.42.1 bash: ssh@172.16.42.1: command not found ┌─[✗]─[root@parrot]─[/] └──╼ #ssh 172.16.42.1 The authenticity of host '172.16.42.1 (172.16.42.1)' can't be established. ECDSA key fingerprint is SHA256:SBzpMaebfpMD5dm9cm0cMvaEO+sWDnC1FM8QJV8pc+E. Are you sure you want to continue connecting (yes/no/[fingerprint])? yes Warning: Permanently added '172.16.42.1' (ECDSA) to the list of known hosts. root@172.16.42.1's password: Permission denied, please try again. root@172.16.42.1's password: BusyBox v1.30.1 () built-in shell (ash) .NN, .cxxdl' xMMO 'cdxxl' .c0WMNk;,NMMW:,xXMMKo. ...:KMMMWMMMMWMMMXc... . , .l0NMMMNXMMMMMMMMMMMMXNMMMWKl' xWd ,0Wd .':xNMMMMMMMMMMMMMMMMNkc'. ;KM0' lWMo .;dNMMMMMMMMMMMMMMWx:. .l. dMWc :WWo oNd .;xKWMMMMMMMMMMMMMMMMMMMMWXx:. dWX: dMW; ,NWo oMW: .. ..,lOXWMMMMMMMMMMWN0o;.. .. cWMl dMN' .XMx oWN; lc .loooolcooclooool. cXl oMWc kMK. oMW' ,WMl cMW: lWMW0d:;cdd:;:o0WMWl lMW: OMW' ,WMl 0M0 xMX. .XMd .lo:.,dXMMMMMMXd,.:ol. kMK. 'NMd KMO NMd KMk lMN. .;:xOxollccddcclloxOx:;. 'WM: OM0 xMX WMo .XMx dMK oNMMMMWOc;;ol;;cOWMMMMNo .XMl kMK dMN NMx 0MO :Kd. .lllcl;.:0WMMMMW0:.;lclll. .xK; 0MO kMX __ ___ ______ _ _____ _.:W0;,oxl:::oOOo:::lxo,;0W: _ .ONo KMk \ \ / (_| ____(_) | __ (_);cKMMMMWk:.;,.;kWMMMMKc;. | | .OX: \ \ /\ / / _| |__ _ | |__) _ _ __ ___ __ _ _ __ _ __ | | ___ NANO \ \/ \/ / | | __| | | | ___| | '_ \ / _ \/ _` | '_ \| '_ \| |/ _ \ 2.6.1 \ /\ / | | | | | | | | | | | | __| (_| | |_) | |_) | | __/ \/ \/ |_|_| |_| |_| |_|_| |_|\___|\__,_| .__/| .__/|_|\___| With OpenWRT 19.07 | | | | ------------------ |_| |_| root@HP 4500 SERIES:~# wget https://github.com/adde88/openwrt-useful-tools/blob/packages-19.07/sslsplit_0.5.5-1_mips_24kc.ipk --2019-10-19 05:30:06-- https://github.com/adde88/openwrt-useful-tools/blob/packages-19.07/sslsplit_0.5.5-1_mips_24kc.ipk Resolving github.com... 140.82.113.4 Connecting to github.com|140.82.113.4|:443... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [text/html] Saving to: 'sslsplit_0.5.5-1_mips_24kc.ipk' sslsplit_0.5.5-1_mips_24kc.ipk [ <=> ] 62.35K 36.6KB/s in 1.7s 2019-10-19 05:30:09 (36.6 KB/s) - 'sslsplit_0.5.5-1_mips_24kc.ipk' saved [63845] root@HP 4500 SERIES:~# ls portals sslsplit_0.5.5-1_mips_24kc.ipk vpn_config root@HP 4500 SERIES:~# cd .. root@HP 4500 SERIES:/# ls bin etc mnt pineapple rom sbin sys usr www dev lib overlay proc root sd tmp var www-getbackup root@HP 4500 SERIES:/# ls sd etc lib lost+found modules portals tmp usr root@HP 4500 SERIES:/# ls modules ls: modules: No such file or directory root@HP 4500 SERIES:/# cd sd root@HP 4500 SERIES:/sd# ls modules APITokens DWall LEDController OpenVPNConnect SSLsplitgh ettercap urlsnarf Cabinet Deauth Locate Papers SignalStrength get wps Commander EvilPortal LogManager PortalAuth SiteSurvey ngrep ConnectedClients HTTPProxy MACInfo RandomRoll Status nmap CursedScreech HackRF Meterpreter Responder Themes p0f DNSMasqSpoof InternetSpeedTest Occupineapple SSIDManager autossh tcpdump DNSspoof KeyManager OnlineHashCrack SSLsplit base64encdec tor root@HP 4500 SERIES:/sd# cd SSLsplitgh -ash: cd: can't cd to SSLsplitgh: No such file or directory root@HP 4500 SERIES:/sd# ls etc lib lost+found modules portals tmp usr root@HP 4500 SERIES:/sd# cd modules/ root@HP 4500 SERIES:/sd/modules# ls APITokens DWall LEDController OpenVPNConnect SSLsplitgh ettercap urlsnarf Cabinet Deauth Locate Papers SignalStrength get wps Commander EvilPortal LogManager PortalAuth SiteSurvey ngrep ConnectedClients HTTPProxy MACInfo RandomRoll Status nmap CursedScreech HackRF Meterpreter Responder Themes p0f DNSMasqSpoof InternetSpeedTest Occupineapple SSIDManager autossh tcpdump DNSspoof KeyManager OnlineHashCrack SSLsplit base64encdec tor root@HP 4500 SERIES:/sd/modules# cd SSLsplitgh/ root@HP 4500 SERIES:/sd/modules/SSLsplitgh# ls root@HP 4500 SERIES:/sd/modules/SSLsplitgh# ls root@HP 4500 SERIES:/sd/modules/SSLsplitgh# cd / root@HP 4500 SERIES:/# ls bin etc mnt pineapple rom sbin sys usr www dev lib overlay proc root sd tmp var www-getbackup root@HP 4500 SERIES:/# ls bin etc mnt pineapple rom sbin sys usr www dev lib overlay proc root sd tmp var www-getbackup root@HP 4500 SERIES:/# ls root portals sslsplit_0.5.5-1_mips_24kc.ipk vpn_config root@HP 4500 SERIES:/# cd root root@HP 4500 SERIES:~# opkg update ; opkg install sslsplit_0.5.5-1_mips_24kc.ipk -d sd Downloading https://downloads.hak5.org/packages/mk6/1907/Packages.gz Updated list of available packages in /var/opkg-lists/1907_pineapple Downloading https://downloads.openwrt.org/releases/packages-19.07/mips_24kc/base/Packages.gz Updated list of available packages in /var/opkg-lists/1907_base Downloading https://downloads.openwrt.org/releases/packages-19.07/mips_24kc/packages/Packages.gz Updated list of available packages in /var/opkg-lists/1907_packages Downloading https://downloads.openwrt.org/releases/packages-19.07/mips_24kc/routing/Packages.gz Updated list of available packages in /var/opkg-lists/1907_routing Segmentation fault root@HP 4500 SERIES:~# opkg install sslsplit_0.5.5-1_mips_24kc.ipk -d sd Segmentation fault root@HP 4500 SERIES:~# root@HP 4500 SERIES:~# root@HP 4500 SERIES:~# opkg install sslsplit_0.5.5-1_mips_24kc.ipk -d sd Segmentation fault root@HP 4500 SERIES:~# root@HP 4500 SERIES:~# ls portals sslsplit_0.5.5-1_mips_24kc.ipk vpn_config root@HP 4500 SERIES:~# opkg -h opkg: unrecognized option: h opkg must have one sub-command argument usage: opkg [options...] sub-command [arguments...] where sub-command is one of: Package Manipulation: update Update list of available packages upgrade <pkgs> Upgrade packages install <pkgs> Install package(s) configure <pkgs> Configure unpacked package(s) remove <pkgs|regexp> Remove package(s) flag <flag> <pkgs> Flag package(s) <flag>=hold|noprune|user|ok|installed|unpacked (one per invocation) Informational Commands: list List available packages list-installed List installed packages list-upgradable List installed and upgradable packages list-changed-conffiles List user modified configuration files files <pkg> List files belonging to <pkg> search <file|regexp> List package providing <file> find <regexp> List packages whose name or description matches <regexp> info [pkg|regexp] Display all info for <pkg> status [pkg|regexp] Display all status for <pkg> download <pkg> Download <pkg> to current directory compare-versions <v1> <op> <v2> compare versions using <= < > >= = << >> print-architecture List installable package architectures depends [-A] [pkgname|pat]+ whatdepends [-A] [pkgname|pat]+ whatdependsrec [-A] [pkgname|pat]+ whatrecommends[-A] [pkgname|pat]+ whatsuggests[-A] [pkgname|pat]+ whatprovides [-A] [pkgname|pat]+ whatconflicts [-A] [pkgname|pat]+ whatreplaces [-A] [pkgname|pat]+ Options: -A Query all packages not just those installed -V[<level>] Set verbosity level to <level>. --verbosity[=<level>] Verbosity levels: 0 errors only 1 normal messages (default) 2 informative messages 3 debug 4 debug level 2 -f <conf_file> Use <conf_file> as the opkg configuration file --conf <conf_file> --cache <directory> Use a package cache -d <dest_name> Use <dest_name> as the the root directory for --dest <dest_name> package installation, removal, upgrading. <dest_name> should be a defined dest name from the configuration file, (but can also be a directory name in a pinch). -o <dir> Use <dir> as the root directory for --offline-root <dir> offline installation of packages. --add-arch <arch>:<prio> Register architecture with given priority --add-dest <name>:<path> Register destination with given path Force Options: --force-depends Install/remove despite failed dependencies --force-maintainer Overwrite preexisting config files --force-reinstall Reinstall package(s) --force-overwrite Overwrite files from other package(s) --force-downgrade Allow opkg to downgrade packages --force-space Disable free space checks --force-postinstall Run postinstall scripts even in offline mode --force-remove Remove package even if prerm script fails --force-checksum Don't fail on checksum mismatches --no-check-certificate Don't validate SSL certificates --noaction No action -- test only --download-only No action -- download only --nodeps Do not follow dependencies --nocase Perform case insensitive pattern matching --size Print package size when listing available packages --force-removal-of-dependent-packages Remove package and all dependencies --autoremove Remove packages that were installed automatically to satisfy dependencies -t Specify tmp-dir. --tmp-dir Specify tmp-dir. -l Specify lists-dir. --lists-dir Specify lists-dir. regexp could be something like 'pkgname*' '*file*' or similar e.g. opkg info 'libstd*' or opkg search '*libop*' or opkg remove 'libncur*' root@HP 4500 SERIES:~# ls portals sslsplit_0.5.5-1_mips_24kc.ipk vpn_config root@HP 4500 SERIES:~# cd / root@HP 4500 SERIES:/# ls bin etc mnt pineapple rom sbin sys usr www dev lib overlay proc root sd tmp var www-getbackup root@HP 4500 SERIES:/# opkg install sslsplit_0.5.5-1_mips_24kc.ipk -d /root/sd Collected errors: * resolve_pkg_dest_list: Unknown dest name: `/root/sd'. root@HP 4500 SERIES:/# opkg install sslsplit_0.5.5-1_mips_24kc.ipk -d /sd Collected errors: * resolve_pkg_dest_list: Unknown dest name: `/sd'. root@HP 4500 SERIES:/# ls bin etc mnt pineapple rom sbin sys usr www dev lib overlay proc root sd tmp var www-getbackup root@HP 4500 SERIES:/# cd root root@HP 4500 SERIES:~# opkg install sslsplit_0.5.5-1_mips_24kc.ipk -d /sd Collected errors: * resolve_pkg_dest_list: Unknown dest name: `/sd'. root@HP 4500 SERIES:~# ls portals sslsplit_0.5.5-1_mips_24kc.ipk vpn_config root@HP 4500 SERIES:~# mv -h mv: unrecognized option: h BusyBox v1.30.1 () multi-call binary. Usage: mv [-fin] SOURCE DEST or: mv [-fin] SOURCE... DIRECTORY Rename SOURCE to DEST, or move SOURCE(s) to DIRECTORY -f Don't prompt before overwriting -i Interactive, prompt before overwrite -n Don't overwrite an existing file root@HP 4500 SERIES:~# mv opkg install sslsplit_0.5.5-1_mips_24kc.ipk -d sd mv: unrecognized option: d BusyBox v1.30.1 () multi-call binary. Usage: mv [-fin] SOURCE DEST or: mv [-fin] SOURCE... DIRECTORY Rename SOURCE to DEST, or move SOURCE(s) to DIRECTORY -f Don't prompt before overwriting -i Interactive, prompt before overwrite -n Don't overwrite an existing file root@HP 4500 SERIES:~# root@HP 4500 SERIES:~# opkg install sslsplit_0.5.5-1_mips_24kc.ipk -d sd Collected errors: * pkg_init_from_file: Malformed package file sslsplit_0.5.5-1_mips_24kc.ipk. root@HP 4500 SERIES:~# root@HP 4500 SERIES:~# mv sslsplit_0.5.5-1_mips_24kc.ipk /sd root@HP 4500 SERIES:~# cd /sd root@HP 4500 SERIES:/sd# ls etc lost+found portals tmp lib modules sslsplit_0.5.5-1_mips_24kc.ipk usr root@HP 4500 SERIES:/sd# mv sslsplit_0.5.5-1_mips_24kc.ipk /sd root@HP 4500 SERIES:/sd# opkg install sslsplit_0.5.5-1_mips_24kc.ipk -d sd Collected errors: * pkg_init_from_file: Malformed package file sslsplit_0.5.5-1_mips_24kc.ipk. root@HP 4500 SERIES:/sd# opkg install sslsplit_0.5.5-1_mips_24kc.ipk -d /sd Collected errors: * resolve_pkg_dest_list: Unknown dest name: `/sd'. root@HP 4500 SERIES:/sd# opkg install sslsplit_0.5.5-1_mips_24kc.ipk -d opkg: option requires an argument: d opkg must have one sub-command argument usage: opkg [options...] sub-command [arguments...] where sub-command is one of: Package Manipulation: update Update list of available packages upgrade <pkgs> Upgrade packages install <pkgs> Install package(s) configure <pkgs> Configure unpacked package(s) remove <pkgs|regexp> Remove package(s) flag <flag> <pkgs> Flag package(s) <flag>=hold|noprune|user|ok|installed|unpacked (one per invocation) Informational Commands: list List available packages list-installed List installed packages list-upgradable List installed and upgradable packages list-changed-conffiles List user modified configuration files files <pkg> List files belonging to <pkg> search <file|regexp> List package providing <file> find <regexp> List packages whose name or description matches <regexp> info [pkg|regexp] Display all info for <pkg> status [pkg|regexp] Display all status for <pkg> download <pkg> Download <pkg> to current directory compare-versions <v1> <op> <v2> compare versions using <= < > >= = << >> print-architecture List installable package architectures depends [-A] [pkgname|pat]+ whatdepends [-A] [pkgname|pat]+ whatdependsrec [-A] [pkgname|pat]+ whatrecommends[-A] [pkgname|pat]+ whatsuggests[-A] [pkgname|pat]+ whatprovides [-A] [pkgname|pat]+ whatconflicts [-A] [pkgname|pat]+ whatreplaces [-A] [pkgname|pat]+ Options: -A Query all packages not just those installed -V[<level>] Set verbosity level to <level>. --verbosity[=<level>] Verbosity levels: 0 errors only 1 normal messages (default) 2 informative messages 3 debug 4 debug level 2 -f <conf_file> Use <conf_file> as the opkg configuration file --conf <conf_file> --cache <directory> Use a package cache -d <dest_name> Use <dest_name> as the the root directory for --dest <dest_name> package installation, removal, upgrading. <dest_name> should be a defined dest name from the configuration file, (but can also be a directory name in a pinch). -o <dir> Use <dir> as the root directory for --offline-root <dir> offline installation of packages. --add-arch <arch>:<prio> Register architecture with given priority --add-dest <name>:<path> Register destination with given path Force Options: --force-depends Install/remove despite failed dependencies --force-maintainer Overwrite preexisting config files --force-reinstall Reinstall package(s) --force-overwrite Overwrite files from other package(s) --force-downgrade Allow opkg to downgrade packages --force-space Disable free space checks --force-postinstall Run postinstall scripts even in offline mode --force-remove Remove package even if prerm script fails --force-checksum Don't fail on checksum mismatches --no-check-certificate Don't validate SSL certificates --noaction No action -- test only --download-only No action -- download only --nodeps Do not follow dependencies --nocase Perform case insensitive pattern matching --size Print package size when listing available packages --force-removal-of-dependent-packages Remove package and all dependencies --autoremove Remove packages that were installed automatically to satisfy dependencies -t Specify tmp-dir. --tmp-dir Specify tmp-dir. -l Specify lists-dir. --lists-dir Specify lists-dir. regexp could be something like 'pkgname*' '*file*' or similar e.g. opkg info 'libstd*' or opkg search '*libop*' or opkg remove 'libncur*' root@HP 4500 SERIES:/sd# opkg install sslsplit_0.5.5-1_mips_24kc.ipk Collected errors: * pkg_init_from_file: Malformed package file sslsplit_0.5.5-1_mips_24kc.ipk. root@HP 4500 SERIES:/sd# ls etc lost+found portals tmp lib modules sslsplit_0.5.5-1_mips_24kc.ipk usr root@HP 4500 SERIES:/sd# opkg -h opkg: unrecognized option: h opkg must have one sub-command argument usage: opkg [options...] sub-command [arguments...] where sub-command is one of: Package Manipulation: update Update list of available packages upgrade <pkgs> Upgrade packages install <pkgs> Install package(s) configure <pkgs> Configure unpacked package(s) remove <pkgs|regexp> Remove package(s) flag <flag> <pkgs> Flag package(s) <flag>=hold|noprune|user|ok|installed|unpacked (one per invocation) Informational Commands: list List available packages list-installed List installed packages list-upgradable List installed and upgradable packages list-changed-conffiles List user modified configuration files files <pkg> List files belonging to <pkg> search <file|regexp> List package providing <file> find <regexp> List packages whose name or description matches <regexp> info [pkg|regexp] Display all info for <pkg> status [pkg|regexp] Display all status for <pkg> download <pkg> Download <pkg> to current directory compare-versions <v1> <op> <v2> compare versions using <= < > >= = << >> print-architecture List installable package architectures depends [-A] [pkgname|pat]+ whatdepends [-A] [pkgname|pat]+ whatdependsrec [-A] [pkgname|pat]+ whatrecommends[-A] [pkgname|pat]+ whatsuggests[-A] [pkgname|pat]+ whatprovides [-A] [pkgname|pat]+ whatconflicts [-A] [pkgname|pat]+ whatreplaces [-A] [pkgname|pat]+ Options: -A Query all packages not just those installed -V[<level>] Set verbosity level to <level>. --verbosity[=<level>] Verbosity levels: 0 errors only 1 normal messages (default) 2 informative messages 3 debug 4 debug level 2 -f <conf_file> Use <conf_file> as the opkg configuration file --conf <conf_file> --cache <directory> Use a package cache -d <dest_name> Use <dest_name> as the the root directory for --dest <dest_name> package installation, removal, upgrading. <dest_name> should be a defined dest name from the configuration file, (but can also be a directory name in a pinch). -o <dir> Use <dir> as the root directory for --offline-root <dir> offline installation of packages. --add-arch <arch>:<prio> Register architecture with given priority --add-dest <name>:<path> Register destination with given path Force Options: --force-depends Install/remove despite failed dependencies --force-maintainer Overwrite preexisting config files --force-reinstall Reinstall package(s) --force-overwrite Overwrite files from other package(s) --force-downgrade Allow opkg to downgrade packages --force-space Disable free space checks --force-postinstall Run postinstall scripts even in offline mode --force-remove Remove package even if prerm script fails --force-checksum Don't fail on checksum mismatches --no-check-certificate Don't validate SSL certificates --noaction No action -- test only --download-only No action -- download only --nodeps Do not follow dependencies --nocase Perform case insensitive pattern matching --size Print package size when listing available packages --force-removal-of-dependent-packages Remove package and all dependencies --autoremove Remove packages that were installed automatically to satisfy dependencies -t Specify tmp-dir. --tmp-dir Specify tmp-dir. -l Specify lists-dir. --lists-dir Specify lists-dir. regexp could be something like 'pkgname*' '*file*' or similar e.g. opkg info 'libstd*' or opkg search '*libop*' or opkg remove 'libncur*' root@HP 4500 SERIES:/sd# opkg configure sslsplit_0.5.5-1_mips_24kc.ipk root@HP 4500 SERIES:/sd# opkg install sslsplit_0.5.5-1_mips_24kc.ipk Collected errors: * pkg_init_from_file: Malformed package file sslsplit_0.5.5-1_mips_24kc.ipk. root@HP 4500 SERIES:/sd# opkg make sslsplit_0.5.5-1_mips_24kc.ipk opkg: unknown sub-command make usage: opkg [options...] sub-command [arguments...] where sub-command is one of: Package Manipulation: update Update list of available packages upgrade <pkgs> Upgrade packages install <pkgs> Install package(s) configure <pkgs> Configure unpacked package(s) remove <pkgs|regexp> Remove package(s) flag <flag> <pkgs> Flag package(s) <flag>=hold|noprune|user|ok|installed|unpacked (one per invocation) Informational Commands: list List available packages list-installed List installed packages list-upgradable List installed and upgradable packages list-changed-conffiles List user modified configuration files files <pkg> List files belonging to <pkg> search <file|regexp> List package providing <file> find <regexp> List packages whose name or description matches <regexp> info [pkg|regexp] Display all info for <pkg> status [pkg|regexp] Display all status for <pkg> download <pkg> Download <pkg> to current directory compare-versions <v1> <op> <v2> compare versions using <= < > >= = << >> print-architecture List installable package architectures depends [-A] [pkgname|pat]+ whatdepends [-A] [pkgname|pat]+ whatdependsrec [-A] [pkgname|pat]+ whatrecommends[-A] [pkgname|pat]+ whatsuggests[-A] [pkgname|pat]+ whatprovides [-A] [pkgname|pat]+ whatconflicts [-A] [pkgname|pat]+ whatreplaces [-A] [pkgname|pat]+ Options: -A Query all packages not just those installed -V[<level>] Set verbosity level to <level>. --verbosity[=<level>] Verbosity levels: 0 errors only 1 normal messages (default) 2 informative messages 3 debug 4 debug level 2 -f <conf_file> Use <conf_file> as the opkg configuration file --conf <conf_file> --cache <directory> Use a package cache -d <dest_name> Use <dest_name> as the the root directory for --dest <dest_name> package installation, removal, upgrading. <dest_name> should be a defined dest name from the configuration file, (but can also be a directory name in a pinch). -o <dir> Use <dir> as the root directory for --offline-root <dir> offline installation of packages. --add-arch <arch>:<prio> Register architecture with given priority --add-dest <name>:<path> Register destination with given path Force Options: --force-depends Install/remove despite failed dependencies --force-maintainer Overwrite preexisting config files --force-reinstall Reinstall package(s) --force-overwrite Overwrite files from other package(s) --force-downgrade Allow opkg to downgrade packages --force-space Disable free space checks --force-postinstall Run postinstall scripts even in offline mode --force-remove Remove package even if prerm script fails --force-checksum Don't fail on checksum mismatches --no-check-certificate Don't validate SSL certificates --noaction No action -- test only --download-only No action -- download only --nodeps Do not follow dependencies --nocase Perform case insensitive pattern matching --size Print package size when listing available packages --force-removal-of-dependent-packages Remove package and all dependencies --autoremove Remove packages that were installed automatically to satisfy dependencies -t Specify tmp-dir. --tmp-dir Specify tmp-dir. -l Specify lists-dir. --lists-dir Specify lists-dir. regexp could be something like 'pkgname*' '*file*' or similar e.g. opkg info 'libstd*' or opkg search '*libop*' or opkg remove 'libncur*' root@HP 4500 SERIES:/sd# opkg update Downloading https://downloads.hak5.org/packages/mk6/1907/Packages.gz Updated list of available packages in /var/opkg-lists/1907_pineapple Downloading https://downloads.openwrt.org/releases/packages-19.07/mips_24kc/base/Packages.gz Updated list of available packages in /var/opkg-lists/1907_base Downloading https://downloads.openwrt.org/releases/packages-19.07/mips_24kc/packages/Packages.gz Updated list of available packages in /var/opkg-lists/1907_packages Downloading https://downloads.openwrt.org/releases/packages-19.07/mips_24kc/routing/Packages.gz Updated list of available packages in /var/opkg-lists/1907_routing root@HP 4500 SERIES:/sd# opkg install sslsplit_0.5.5-1_mips_24kc.ipk -d sd Collected errors: * pkg_init_from_file: Malformed package file sslsplit_0.5.5-1_mips_24kc.ipk. root@HP 4500 SERIES:/sd# opkg configure sslsplit_0.5.5-1_mips_24kc.ipk root@HP 4500 SERIES:/sd# opkg configure install sslsplit_0.5.5-1_mips_24kc.ipk root@HP 4500 SERIES:/sd# opkg make install sslsplit_0.5.5-1_mips_24kc.ipk opkg: unknown sub-command make usage: opkg [options...] sub-command [arguments...] where sub-command is one of: Package Manipulation: update Update list of available packages upgrade <pkgs> Upgrade packages install <pkgs> Install package(s) configure <pkgs> Configure unpacked package(s) remove <pkgs|regexp> Remove package(s) flag <flag> <pkgs> Flag package(s) <flag>=hold|noprune|user|ok|installed|unpacked (one per invocation) Informational Commands: list List available packages list-installed List installed packages list-upgradable List installed and upgradable packages list-changed-conffiles List user modified configuration files files <pkg> List files belonging to <pkg> search <file|regexp> List package providing <file> find <regexp> List packages whose name or description matches <regexp> info [pkg|regexp] Display all info for <pkg> status [pkg|regexp] Display all status for <pkg> download <pkg> Download <pkg> to current directory compare-versions <v1> <op> <v2> compare versions using <= < > >= = << >> print-architecture List installable package architectures depends [-A] [pkgname|pat]+ whatdepends [-A] [pkgname|pat]+ whatdependsrec [-A] [pkgname|pat]+ whatrecommends[-A] [pkgname|pat]+ whatsuggests[-A] [pkgname|pat]+ whatprovides [-A] [pkgname|pat]+ whatconflicts [-A] [pkgname|pat]+ whatreplaces [-A] [pkgname|pat]+ Options: -A Query all packages not just those installed -V[<level>] Set verbosity level to <level>. --verbosity[=<level>] Verbosity levels: 0 errors only 1 normal messages (default) 2 informative messages 3 debug 4 debug level 2 -f <conf_file> Use <conf_file> as the opkg configuration file --conf <conf_file> --cache <directory> Use a package cache -d <dest_name> Use <dest_name> as the the root directory for --dest <dest_name> package installation, removal, upgrading. <dest_name> should be a defined dest name from the configuration file, (but can also be a directory name in a pinch). -o <dir> Use <dir> as the root directory for --offline-root <dir> offline installation of packages. --add-arch <arch>:<prio> Register architecture with given priority --add-dest <name>:<path> Register destination with given path Force Options: --force-depends Install/remove despite failed dependencies --force-maintainer Overwrite preexisting config files --force-reinstall Reinstall package(s) --force-overwrite Overwrite files from other package(s) --force-downgrade Allow opkg to downgrade packages --force-space Disable free space checks --force-postinstall Run postinstall scripts even in offline mode --force-remove Remove package even if prerm script fails --force-checksum Don't fail on checksum mismatches --no-check-certificate Don't validate SSL certificates --noaction No action -- test only --download-only No action -- download only --nodeps Do not follow dependencies --nocase Perform case insensitive pattern matching --size Print package size when listing available packages --force-removal-of-dependent-packages Remove package and all dependencies --autoremove Remove packages that were installed automatically to satisfy dependencies -t Specify tmp-dir. --tmp-dir Specify tmp-dir. -l Specify lists-dir. --lists-dir Specify lists-dir. regexp could be something like 'pkgname*' '*file*' or similar e.g. opkg info 'libstd*' or opkg search '*libop*' or opkg remove 'libncur*' root@HP 4500 SERIES:/sd# opkg install sslsplit_0.5.5-1_mips_24kc.ipk Collected errors: * pkg_init_from_file: Malformed package file sslsplit_0.5.5-1_mips_24kc.ipk. root@HP 4500 SERIES:/sd# opkg upgrade opkg: the ``upgrade'' command requires at least one argument usage: opkg [options...] sub-command [arguments...] where sub-command is one of: Package Manipulation: update Update list of available packages upgrade <pkgs> Upgrade packages install <pkgs> Install package(s) configure <pkgs> Configure unpacked package(s) remove <pkgs|regexp> Remove package(s) flag <flag> <pkgs> Flag package(s) <flag>=hold|noprune|user|ok|installed|unpacked (one per invocation) Informational Commands: list List available packages list-installed List installed packages list-upgradable List installed and upgradable packages list-changed-conffiles List user modified configuration files files <pkg> List files belonging to <pkg> search <file|regexp> List package providing <file> find <regexp> List packages whose name or description matches <regexp> info [pkg|regexp] Display all info for <pkg> status [pkg|regexp] Display all status for <pkg> download <pkg> Download <pkg> to current directory compare-versions <v1> <op> <v2> compare versions using <= < > >= = << >> print-architecture List installable package architectures depends [-A] [pkgname|pat]+ whatdepends [-A] [pkgname|pat]+ whatdependsrec [-A] [pkgname|pat]+ whatrecommends[-A] [pkgname|pat]+ whatsuggests[-A] [pkgname|pat]+ whatprovides [-A] [pkgname|pat]+ whatconflicts [-A] [pkgname|pat]+ whatreplaces [-A] [pkgname|pat]+ Options: -A Query all packages not just those installed -V[<level>] Set verbosity level to <level>. --verbosity[=<level>] Verbosity levels: 0 errors only 1 normal messages (default) 2 informative messages 3 debug 4 debug level 2 -f <conf_file> Use <conf_file> as the opkg configuration file --conf <conf_file> --cache <directory> Use a package cache -d <dest_name> Use <dest_name> as the the root directory for --dest <dest_name> package installation, removal, upgrading. <dest_name> should be a defined dest name from the configuration file, (but can also be a directory name in a pinch). -o <dir> Use <dir> as the root directory for --offline-root <dir> offline installation of packages. --add-arch <arch>:<prio> Register architecture with given priority --add-dest <name>:<path> Register destination with given path Force Options: --force-depends Install/remove despite failed dependencies --force-maintainer Overwrite preexisting config files --force-reinstall Reinstall package(s) --force-overwrite Overwrite files from other package(s) --force-downgrade Allow opkg to downgrade packages --force-space Disable free space checks --force-postinstall Run postinstall scripts even in offline mode --force-remove Remove package even if prerm script fails --force-checksum Don't fail on checksum mismatches --no-check-certificate Don't validate SSL certificates --noaction No action -- test only --download-only No action -- download only --nodeps Do not follow dependencies --nocase Perform case insensitive pattern matching --size Print package size when listing available packages --force-removal-of-dependent-packages Remove package and all dependencies --autoremove Remove packages that were installed automatically to satisfy dependencies -t Specify tmp-dir. --tmp-dir Specify tmp-dir. -l Specify lists-dir. --lists-dir Specify lists-dir. regexp could be something like 'pkgname*' '*file*' or similar e.g. opkg info 'libstd*' or opkg search '*libop*' or opkg remove 'libncur*' root@HP 4500 SERIES:/sd# opkg upgrade --force-depends opkg: the ``upgrade'' command requires at least one argument usage: opkg [options...] sub-command [arguments...] where sub-command is one of: Package Manipulation: update Update list of available packages upgrade <pkgs> Upgrade packages install <pkgs> Install package(s) configure <pkgs> Configure unpacked package(s) remove <pkgs|regexp> Remove package(s) flag <flag> <pkgs> Flag package(s) <flag>=hold|noprune|user|ok|installed|unpacked (one per invocation) Informational Commands: list List available packages list-installed List installed packages list-upgradable List installed and upgradable packages list-changed-conffiles List user modified configuration files files <pkg> List files belonging to <pkg> search <file|regexp> List package providing <file> find <regexp> List packages whose name or description matches <regexp> info [pkg|regexp] Display all info for <pkg> status [pkg|regexp] Display all status for <pkg> download <pkg> Download <pkg> to current directory compare-versions <v1> <op> <v2> compare versions using <= < > >= = << >> print-architecture List installable package architectures depends [-A] [pkgname|pat]+ whatdepends [-A] [pkgname|pat]+ whatdependsrec [-A] [pkgname|pat]+ whatrecommends[-A] [pkgname|pat]+ whatsuggests[-A] [pkgname|pat]+ whatprovides [-A] [pkgname|pat]+ whatconflicts [-A] [pkgname|pat]+ whatreplaces [-A] [pkgname|pat]+ Options: -A Query all packages not just those installed -V[<level>] Set verbosity level to <level>. --verbosity[=<level>] Verbosity levels: 0 errors only 1 normal messages (default) 2 informative messages 3 debug 4 debug level 2 -f <conf_file> Use <conf_file> as the opkg configuration file --conf <conf_file> --cache <directory> Use a package cache -d <dest_name> Use <dest_name> as the the root directory for --dest <dest_name> package installation, removal, upgrading. <dest_name> should be a defined dest name from the configuration file, (but can also be a directory name in a pinch). -o <dir> Use <dir> as the root directory for --offline-root <dir> offline installation of packages. --add-arch <arch>:<prio> Register architecture with given priority --add-dest <name>:<path> Register destination with given path Force Options: --force-depends Install/remove despite failed dependencies --force-maintainer Overwrite preexisting config files --force-reinstall Reinstall package(s) --force-overwrite Overwrite files from other package(s) --force-downgrade Allow opkg to downgrade packages --force-space Disable free space checks --force-postinstall Run postinstall scripts even in offline mode --force-remove Remove package even if prerm script fails --force-checksum Don't fail on checksum mismatches --no-check-certificate Don't validate SSL certificates --noaction No action -- test only --download-only No action -- download only --nodeps Do not follow dependencies --nocase Perform case insensitive pattern matching --size Print package size when listing available packages --force-removal-of-dependent-packages Remove package and all dependencies --autoremove Remove packages that were installed automatically to satisfy dependencies -t Specify tmp-dir. --tmp-dir Specify tmp-dir. -l Specify lists-dir. --lists-dir Specify lists-dir. regexp could be something like 'pkgname*' '*file*' or similar e.g. opkg info 'libstd*' or opkg search '*libop*' or opkg remove 'libncur*' root@HP 4500 SERIES:/sd# cd.. -ash: cd..: not found root@HP 4500 SERIES:/sd# cd.. -ash: cd..: not found root@HP 4500 SERIES:/sd# cd.. -ash: cd..: not found root@HP 4500 SERIES:/sd# cd .. root@HP 4500 SERIES:/# cd .. root@HP 4500 SERIES:/# opkg install sslsplit_0.5.5-1_mips_24kc.ipk Collected errors: * wfopen: sslsplit_0.5.5-1_mips_24kc.ipk: No such file or directory. * pkg_init_from_file: Failed to extract control file from sslsplit_0.5.5-1_mips_24kc.ipk. root@HP 4500 SERIES:/# opkg install sslsplit_0.5.5-1_mips_24kc.ipk -d sd Collected errors: * wfopen: sslsplit_0.5.5-1_mips_24kc.ipk: No such file or directory. * pkg_init_from_file: Failed to extract control file from sslsplit_0.5.5-1_mips_24kc.ipk. root@HP 4500 SERIES:/# wget https://github.com/adde88/openwrt-useful-tools/blob/packages-19.07/sslsplit_0.5.5-1_mips_24kc.ipk --2019-10-19 05:49:34-- https://github.com/adde88/openwrt-useful-tools/blob/packages-19.07/sslsplit_0.5.5-1_mips_24kc.ipk Resolving github.com... 140.82.113.4 Connecting to github.com|140.82.113.4|:443... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [text/html] Saving to: 'sslsplit_0.5.5-1_mips_24kc.ipk' sslsplit_0.5.5-1_mips_24kc.ipk [ <=> ] 62.37K 49.8KB/s in 1.3s 2019-10-19 05:49:36 (49.8 KB/s) - 'sslsplit_0.5.5-1_mips_24kc.ipk' saved [63867] root@HP 4500 SERIES:/# opkg install sslsplit_0.5.5-1_mips_24kc.ipk -d sd Collected errors: * pkg_init_from_file: Malformed package file sslsplit_0.5.5-1_mips_24kc.ipk. root@HP 4500 SERIES:/# opkg install sslsplit_0.5.5-1_mips_24kc.ipk -d /sd Collected errors: * resolve_pkg_dest_list: Unknown dest name: `/sd'. root@HP 4500 SERIES:/# opkg install sslsplit_0.5.5-1_mips_24kc.ipk -d /sd/ Collected errors: * resolve_pkg_dest_list: Unknown dest name: `/sd/'. root@HP 4500 SERIES:/# ls bin overlay sbin usr dev pineapple sd var etc proc sslsplit_0.5.5-1_mips_24kc.ipk www lib rom sys www-getbackup mnt root tmp root@HP 4500 SERIES:/# ls sd etc lost+found portals tmp lib modules sslsplit_0.5.5-1_mips_24kc.ipk usr root@HP 4500 SERIES:/# opkg install sslsplit_0.5.5-1_mips_24kc.ipk -d sd/ Collected errors: * resolve_pkg_dest_list: Unknown dest name: `sd/'. root@HP 4500 SERIES:/# opkg install sslsplit_0.5.5-1_mips_24kc.ipk -d sd Collected errors: * pkg_init_from_file: Malformed package file sslsplit_0.5.5-1_mips_24kc.ipk. root@HP 4500 SERIES:/# opkg configure sslsplit_0.5.5-1_mips_24kc.ipk -d sd root@HP 4500 SERIES:/# opkg install sslsplit_0.5.5-1_mips_24kc.ipk -d sd Collected errors: * pkg_init_from_file: Malformed package file sslsplit_0.5.5-1_mips_24kc.ipk. root@HP 4500 SERIES:/# opkg install sslsplit_0.5.5-1_mips_24kc.ipk Collected errors: * pkg_init_from_file: Malformed package file sslsplit_0.5.5-1_mips_24kc.ipk. root@HP 4500 SERIES:/# opkg make sslsplit_0.5.5-1_mips_24kc.ipk -d sd opkg: unknown sub-command make usage: opkg [options...] sub-command [arguments...] where sub-command is one of: Package Manipulation: update Update list of available packages upgrade <pkgs> Upgrade packages install <pkgs> Install package(s) configure <pkgs> Configure unpacked package(s) remove <pkgs|regexp> Remove package(s) flag <flag> <pkgs> Flag package(s) <flag>=hold|noprune|user|ok|installed|unpacked (one per invocation) Informational Commands: list List available packages list-installed List installed packages list-upgradable List installed and upgradable packages list-changed-conffiles List user modified configuration files files <pkg> List files belonging to <pkg> search <file|regexp> List package providing <file> find <regexp> List packages whose name or description matches <regexp> info [pkg|regexp] Display all info for <pkg> status [pkg|regexp] Display all status for <pkg> download <pkg> Download <pkg> to current directory compare-versions <v1> <op> <v2> compare versions using <= < > >= = << >> print-architecture List installable package architectures depends [-A] [pkgname|pat]+ whatdepends [-A] [pkgname|pat]+ whatdependsrec [-A] [pkgname|pat]+ whatrecommends[-A] [pkgname|pat]+ whatsuggests[-A] [pkgname|pat]+ whatprovides [-A] [pkgname|pat]+ whatconflicts [-A] [pkgname|pat]+ whatreplaces [-A] [pkgname|pat]+ Options: -A Query all packages not just those installed -V[<level>] Set verbosity level to <level>. --verbosity[=<level>] Verbosity levels: 0 errors only 1 normal messages (default) 2 informative messages 3 debug 4 debug level 2 -f <conf_file> Use <conf_file> as the opkg configuration file --conf <conf_file> --cache <directory> Use a package cache -d <dest_name> Use <dest_name> as the the root directory for --dest <dest_name> package installation, removal, upgrading. <dest_name> should be a defined dest name from the configuration file, (but can also be a directory name in a pinch). -o <dir> Use <dir> as the root directory for --offline-root <dir> offline installation of packages. --add-arch <arch>:<prio> Register architecture with given priority --add-dest <name>:<path> Register destination with given path Force Options: --force-depends Install/remove despite failed dependencies --force-maintainer Overwrite preexisting config files --force-reinstall Reinstall package(s) --force-overwrite Overwrite files from other package(s) --force-downgrade Allow opkg to downgrade packages --force-space Disable free space checks --force-postinstall Run postinstall scripts even in offline mode --force-remove Remove package even if prerm script fails --force-checksum Don't fail on checksum mismatches --no-check-certificate Don't validate SSL certificates --noaction No action -- test only --download-only No action -- download only --nodeps Do not follow dependencies --nocase Perform case insensitive pattern matching --size Print package size when listing available packages --force-removal-of-dependent-packages Remove package and all dependencies --autoremove Remove packages that were installed automatically to satisfy dependencies -t Specify tmp-dir. --tmp-dir Specify tmp-dir. -l Specify lists-dir. --lists-dir Specify lists-dir. regexp could be something like 'pkgname*' '*file*' or similar e.g. opkg info 'libstd*' or opkg search '*libop*' or opkg remove 'libncur*' root@HP 4500 SERIES:/# opkg configure install sslsplit_0.5.5-1_mips_24kc.ipk root@HP 4500 SERIES:/# opkg install sslsplit_0.5.5-1_mips_24kc.ipk -d sd Collected errors: * pkg_init_from_file: Malformed package file sslsplit_0.5.5-1_mips_24kc.ipk. root@HP 4500 SERIES:/# opkg configure install sslsplit_0.5.5-1_mips_24kc.ipk -d sd root@HP 4500 SERIES:/# opkg install sslsplit_0.5.5-1_mips_24kc.ipk -d sd Collected errors: * pkg_init_from_file: Malformed package file sslsplit_0.5.5-1_mips_24kc.ipk. root@HP 4500 SERIES:/# root@HP 4500 SERIES:/# opkg install sslsplit_0.5.5-1_mips_24kc.ipk Collected errors: * pkg_init_from_file: Malformed package file sslsplit_0.5.5-1_mips_24kc.ipk. root@HP 4500 SERIES:/# opkg update Downloading https://downloads.hak5.org/packages/mk6/1907/Packages.gz Updated list of available packages in /var/opkg-lists/1907_pineapple Downloading https://downloads.openwrt.org/releases/packages-19.07/mips_24kc/base/Packages.gz Updated list of available packages in /var/opkg-lists/1907_base Downloading https://downloads.openwrt.org/releases/packages-19.07/mips_24kc/packages/Packages.gz Updated list of available packages in /var/opkg-lists/1907_packages Downloading https://downloads.openwrt.org/releases/packages-19.07/mips_24kc/routing/Packages.gz Updated list of available packages in /var/opkg-lists/1907_routing root@HP 4500 SERIES:/# cd.. -ash: cd..: not found root@HP 4500 SERIES:/# cd .. root@HP 4500 SERIES:/# opkg update && opkg install sslsplit_0.5.5-1_mips_24kc.ipk -d sd Downloading https://downloads.hak5.org/packages/mk6/1907/Packages.gz Updated list of available packages in /var/opkg-lists/1907_pineapple Downloading https://downloads.openwrt.org/releases/packages-19.07/mips_24kc/base/Packages.gz Updated list of available packages in /var/opkg-lists/1907_base Downloading https://downloads.openwrt.org/releases/packages-19.07/mips_24kc/packages/Packages.gz Updated list of available packages in /var/opkg-lists/1907_packages Downloading https://downloads.openwrt.org/releases/packages-19.07/mips_24kc/routing/Packages.gz Updated list of available packages in /var/opkg-lists/1907_routing Collected errors: * pkg_init_from_file: Malformed package file sslsplit_0.5.5-1_mips_24kc.ipk. root@HP 4500 SERIES:/# root@HP 4500 SERIES:/# opkg install zlib Package zlib (1.2.11-3) installed in root is up to date. root@HP 4500 SERIES:/# opkg update && opkg install sslsplit_0.5.5-1_mips_24kc.ipk -d sd/S Downloading https://downloads.hak5.org/packages/mk6/1907/Packages.gz Updated list of available packages in /var/opkg-lists/1907_pineapple Downloading https://downloads.openwrt.org/releases/packages-19.07/mips_24kc/base/Packages.gz Updated list of available packages in /var/opkg-lists/1907_base Downloading https://downloads.openwrt.org/releases/packages-19.07/mips_24kc/packages/Packages.gz Updated list of available packages in /var/opkg-lists/1907_packages Downloading https://downloads.openwrt.org/releases/packages-19.07/mips_24kc/routing/Packages.gz Updated list of available packages in /var/opkg-lists/1907_routing Collected errors: * resolve_pkg_dest_list: Unknown dest name: `sd/S'. root@HP 4500 SERIES:/# opkg update && opkg install sslsplit_0.5.5-1_mips_24kc.ipk -d /sd/S Downloading https://downloads.hak5.org/packages/mk6/1907/Packages.gz Updated list of available packages in /var/opkg-lists/1907_pineapple Downloading https://downloads.openwrt.org/releases/packages-19.07/mips_24kc/base/Packages.gz Updated list of available packages in /var/opkg-lists/1907_base Downloading https://downloads.openwrt.org/releases/packages-19.07/mips_24kc/packages/Packages.gz Updated list of available packages in /var/opkg-lists/1907_packages Downloading https://downloads.openwrt.org/releases/packages-19.07/mips_24kc/routing/Packages.gz Updated list of available packages in /var/opkg-lists/1907_routing Collected errors: * resolve_pkg_dest_list: Unknown dest name: `/sd/S'. root@HP 4500 SERIES:/# root@HP 4500 SERIES:/# opkg update && opkg install sslsplit_0.5.5-1_mips_24kc.ipk -d / Downloading https://downloads.hak5.org/packages/mk6/1907/Packages.gz Updated list of available packages in /var/opkg-lists/1907_pineapple Downloading https://downloads.openwrt.org/releases/packages-19.07/mips_24kc/base/Packages.gz Updated list of available packages in /var/opkg-lists/1907_base Downloading https://downloads.openwrt.org/releases/packages-19.07/mips_24kc/packages/Packages.gz Updated list of available packages in /var/opkg-lists/1907_packages Downloading https://downloads.openwrt.org/releases/packages-19.07/mips_24kc/routing/Packages.gz Updated list of available packages in /var/opkg-lists/1907_routing Collected errors: * resolve_pkg_dest_list: Unknown dest name: `/'. root@HP 4500 SERIES:/# ls bin overlay sbin usr dev pineapple sd var etc proc sslsplit_0.5.5-1_mips_24kc.ipk www lib rom sys www-getbackup mnt root tmp root@HP 4500 SERIES:/# ls root portals vpn_config root@HP 4500 SERIES:/# cd sd root@HP 4500 SERIES:/sd# ;s -ash: syntax error: unexpected ";" root@HP 4500 SERIES:/sd# ls -ash: sls: not found root@HP 4500 SERIES:/sd# ls etc lost+found portals tmp lib modules sslsplit_0.5.5-1_mips_24kc.ipk usr root@HP 4500 SERIES:/sd# opkg install sslsplit_0.5.5-1_mips_24kc.ipk Collected errors: * pkg_init_from_file: Malformed package file sslsplit_0.5.5-1_mips_24kc.ipk. root@HP 4500 SERIES:/sd# opkg configure install sslsplit_0.5.5-1_mips_24kc.ipk root@HP 4500 SERIES:/sd# opkg install sslsplit_0.5.5-1_mips_24kc.ipk Collected errors: * pkg_init_from_file: Malformed package file sslsplit_0.5.5-1_mips_24kc.ipk. root@HP 4500 SERIES:/sd# opkg make install sslsplit_0.5.5-1_mips_24kc.ipk opkg: unknown sub-command make usage: opkg [options...] sub-command [arguments...] where sub-command is one of: Package Manipulation: update Update list of available packages upgrade <pkgs> Upgrade packages install <pkgs> Install package(s) configure <pkgs> Configure unpacked package(s) remove <pkgs|regexp> Remove package(s) flag <flag> <pkgs> Flag package(s) <flag>=hold|noprune|user|ok|installed|unpacked (one per invocation) Informational Commands: list List available packages list-installed List installed packages list-upgradable List installed and upgradable packages list-changed-conffiles List user modified configuration files files <pkg> List files belonging to <pkg> search <file|regexp> List package providing <file> find <regexp> List packages whose name or description matches <regexp> info [pkg|regexp] Display all info for <pkg> status [pkg|regexp] Display all status for <pkg> download <pkg> Download <pkg> to current directory compare-versions <v1> <op> <v2> compare versions using <= < > >= = << >> print-architecture List installable package architectures depends [-A] [pkgname|pat]+ whatdepends [-A] [pkgname|pat]+ whatdependsrec [-A] [pkgname|pat]+ whatrecommends[-A] [pkgname|pat]+ whatsuggests[-A] [pkgname|pat]+ whatprovides [-A] [pkgname|pat]+ whatconflicts [-A] [pkgname|pat]+ whatreplaces [-A] [pkgname|pat]+ Options: -A Query all packages not just those installed -V[<level>] Set verbosity level to <level>. --verbosity[=<level>] Verbosity levels: 0 errors only 1 normal messages (default) 2 informative messages 3 debug 4 debug level 2 -f <conf_file> Use <conf_file> as the opkg configuration file --conf <conf_file> --cache <directory> Use a package cache -d <dest_name> Use <dest_name> as the the root directory for --dest <dest_name> package installation, removal, upgrading. <dest_name> should be a defined dest name from the configuration file, (but can also be a directory name in a pinch). -o <dir> Use <dir> as the root directory for --offline-root <dir> offline installation of packages. --add-arch <arch>:<prio> Register architecture with given priority --add-dest <name>:<path> Register destination with given path Force Options: --force-depends Install/remove despite failed dependencies --force-maintainer Overwrite preexisting config files --force-reinstall Reinstall package(s) --force-overwrite Overwrite files from other package(s) --force-downgrade Allow opkg to downgrade packages --force-space Disable free space checks --force-postinstall Run postinstall scripts even in offline mode --force-remove Remove package even if prerm script fails --force-checksum Don't fail on checksum mismatches --no-check-certificate Don't validate SSL certificates --noaction No action -- test only --download-only No action -- download only --nodeps Do not follow dependencies --nocase Perform case insensitive pattern matching --size Print package size when listing available packages --force-removal-of-dependent-packages Remove package and all dependencies --autoremove Remove packages that were installed automatically to satisfy dependencies -t Specify tmp-dir. --tmp-dir Specify tmp-dir. -l Specify lists-dir. --lists-dir Specify lists-dir. regexp could be something like 'pkgname*' '*file*' or similar e.g. opkg info 'libstd*' or opkg search '*libop*' or opkg remove 'libncur*' root@HP 4500 SERIES:/sd# opkg update && opkg install sslsplit_0.5.5-1_mips_24kc.ipk -d / Downloading https://downloads.hak5.org/packages/mk6/1907/Packages.gz Updated list of available packages in /var/opkg-lists/1907_pineapple Downloading https://downloads.openwrt.org/releases/packages-19.07/mips_24kc/base/Packages.gz Updated list of available packages in /var/opkg-lists/1907_base Downloading https://downloads.openwrt.org/releases/packages-19.07/mips_24kc/packages/Packages.gz Updated list of available packages in /var/opkg-lists/1907_packages Downloading https://downloads.openwrt.org/releases/packages-19.07/mips_24kc/routing/Packages.gz Updated list of available packages in /var/opkg-lists/1907_routing Collected errors: * resolve_pkg_dest_list: Unknown dest name: `/'. root@HP 4500 SERIES:/sd# opkg update && opkg install sslsplit_0.5.5-1_mips_24kc.ipk -d /root/sd Downloading https://downloads.hak5.org/packages/mk6/1907/Packages.gz Updated list of available packages in /var/opkg-lists/1907_pineapple Downloading https://downloads.openwrt.org/releases/packages-19.07/mips_24kc/base/Packages.gz Updated list of available packages in /var/opkg-lists/1907_base Downloading https://downloads.openwrt.org/releases/packages-19.07/mips_24kc/packages/Packages.gz Updated list of available packages in /var/opkg-lists/1907_packages Downloading https://downloads.openwrt.org/releases/packages-19.07/mips_24kc/routing/Packages.gz Updated list of available packages in /var/opkg-lists/1907_routing Collected errors: * resolve_pkg_dest_list: Unknown dest name: `/root/sd'. root@HP 4500 SERIES:/sd# opkg install sslsplit_0.5.5-1_mips_24kc.ipk Collected errors: * pkg_init_from_file: Malformed package file sslsplit_0.5.5-1_mips_24kc.ipk. root@HP 4500 SERIES:/sd# opkg update && opkg install sslsplit_0.5.5-1_mips_24kc.ipk -d ./sd Downloading https://downloads.hak5.org/packages/mk6/1907/Packages.gz Updated list of available packages in /var/opkg-lists/1907_pineapple Downloading https://downloads.openwrt.org/releases/packages-19.07/mips_24kc/base/Packages.gz Updated list of available packages in /var/opkg-lists/1907_base Downloading https://downloads.openwrt.org/releases/packages-19.07/mips_24kc/packages/Packages.gz Updated list of available packages in /var/opkg-lists/1907_packages Downloading https://downloads.openwrt.org/releases/packages-19.07/mips_24kc/routing/Packages.gz Updated list of available packages in /var/opkg-lists/1907_routing Collected errors: * resolve_pkg_dest_list: Unknown dest name: `./sd'. root@HP 4500 SERIES:/sd# opkg update && opkg install sslsplit_0.5.5-1_mips_24kc.ipk -d ./ Downloading https://downloads.hak5.org/packages/mk6/1907/Packages.gz Updated list of available packages in /var/opkg-lists/1907_pineapple Downloading https://downloads.openwrt.org/releases/packages-19.07/mips_24kc/base/Packages.gz Updated list of available packages in /var/opkg-lists/1907_base Downloading https://downloads.openwrt.org/releases/packages-19.07/mips_24kc/packages/Packages.gz Updated list of available packages in /var/opkg-lists/1907_packages Downloading https://downloads.openwrt.org/releases/packages-19.07/mips_24kc/routing/Packages.gz Updated list of available packages in /var/opkg-lists/1907_routing Collected errors: * resolve_pkg_dest_list: Unknown dest name: `./'. root@HP 4500 SERIES:/sd# bsdtar -tf sslsplit_0.5.5-1_mips_24kc.ipk -ash: bsdtar: not found root@HP 4500 SERIES:/sd# cd .. root@HP 4500 SERIES:/# ls bin overlay sbin usr dev pineapple sd var etc proc sslsplit_0.5.5-1_mips_24kc.ipk www lib rom sys www-getbackup mnt root tmp root@HP 4500 SERIES:/# opkg install sslsplit_0.5.5-1_mips_24kc Unknown package 'sslsplit_0.5.5-1_mips_24kc'. Collected errors: * opkg_install_cmd: Cannot install package sslsplit_0.5.5-1_mips_24kc. root@HP 4500 SERIES:/# opkg configure sslsplit_0.5.5-1_mips_24kc root@HP 4500 SERIES:/# opkg configure install sslsplit_0.5.5-1_mips_24kc root@HP 4500 SERIES:/# opkg install sslsplit_0.5.5-1_mips_24kc Unknown package 'sslsplit_0.5.5-1_mips_24kc'. Collected errors: * opkg_install_cmd: Cannot install package sslsplit_0.5.5-1_mips_24kc. root@HP 4500 SERIES:/# opkg install sslsplit_0.5.5-1_mips_24kc.ipk Collected errors: * pkg_init_from_file: Malformed package file sslsplit_0.5.5-1_mips_24kc.ipk. root@HP 4500 SERIES:/# ls bin overlay sbin usr dev pineapple sd var etc proc sslsplit_0.5.5-1_mips_24kc.ipk www lib rom sys www-getbackup mnt root tmp root@HP 4500 SERIES:/# root@HP 4500 SERIES:/# opkg install sslsplit_0.5.5-1_mips_24kc.opk Collected errors: * wfopen: sslsplit_0.5.5-1_mips_24kc.opk: No such file or directory. * pkg_init_from_file: Failed to extract control file from sslsplit_0.5.5-1_mips_24kc.opk. root@HP 4500 SERIES:/# opkg install sslsplit_0.5.5-1_mips_24kc.ipk Collected errors: * pkg_init_from_file: Malformed package file sslsplit_0.5.5-1_mips_24kc.ipk. root@HP 4500 SERIES:/# opkg -h opkg: unrecognized option: h opkg must have one sub-command argument usage: opkg [options...] sub-command [arguments...] where sub-command is one of: Package Manipulation: update Update list of available packages upgrade <pkgs> Upgrade packages install <pkgs> Install package(s) configure <pkgs> Configure unpacked package(s) remove <pkgs|regexp> Remove package(s) flag <flag> <pkgs> Flag package(s) <flag>=hold|noprune|user|ok|installed|unpacked (one per invocation) Informational Commands: list List available packages list-installed List installed packages list-upgradable List installed and upgradable packages list-changed-conffiles List user modified configuration files files <pkg> List files belonging to <pkg> search <file|regexp> List package providing <file> find <regexp> List packages whose name or description matches <regexp> info [pkg|regexp] Display all info for <pkg> status [pkg|regexp] Display all status for <pkg> download <pkg> Download <pkg> to current directory compare-versions <v1> <op> <v2> compare versions using <= < > >= = << >> print-architecture List installable package architectures depends [-A] [pkgname|pat]+ whatdepends [-A] [pkgname|pat]+ whatdependsrec [-A] [pkgname|pat]+ whatrecommends[-A] [pkgname|pat]+ whatsuggests[-A] [pkgname|pat]+ whatprovides [-A] [pkgname|pat]+ whatconflicts [-A] [pkgname|pat]+ whatreplaces [-A] [pkgname|pat]+ Options: -A Query all packages not just those installed -V[<level>] Set verbosity level to <level>. --verbosity[=<level>] Verbosity levels: 0 errors only 1 normal messages (default) 2 informative messages 3 debug 4 debug level 2 -f <conf_file> Use <conf_file> as the opkg configuration file --conf <conf_file> --cache <directory> Use a package cache -d <dest_name> Use <dest_name> as the the root directory for --dest <dest_name> package installation, removal, upgrading. <dest_name> should be a defined dest name from the configuration file, (but can also be a directory name in a pinch). -o <dir> Use <dir> as the root directory for --offline-root <dir> offline installation of packages. --add-arch <arch>:<prio> Register architecture with given priority --add-dest <name>:<path> Register destination with given path Force Options: --force-depends Install/remove despite failed dependencies --force-maintainer Overwrite preexisting config files --force-reinstall Reinstall package(s) --force-overwrite Overwrite files from other package(s) --force-downgrade Allow opkg to downgrade packages --force-space Disable free space checks --force-postinstall Run postinstall scripts even in offline mode --force-remove Remove package even if prerm script fails --force-checksum Don't fail on checksum mismatches --no-check-certificate Don't validate SSL certificates --noaction No action -- test only --download-only No action -- download only --nodeps Do not follow dependencies --nocase Perform case insensitive pattern matching --size Print package size when listing available packages --force-removal-of-dependent-packages Remove package and all dependencies --autoremove Remove packages that were installed automatically to satisfy dependencies -t Specify tmp-dir. --tmp-dir Specify tmp-dir. -l Specify lists-dir. --lists-dir Specify lists-dir. regexp could be something like 'pkgname*' '*file*' or similar e.g. opkg info 'libstd*' or opkg search '*libop*' or opkg remove 'libncur*' root@HP 4500 SERIES:/# opkg update && opkg install sslsplit_0.5.5-1_mips_24kc.ipk -d <sd> -ash: syntax error: unexpected newline root@HP 4500 SERIES:/# opkg update && opkg install sslsplit_0.5.5-1_mips_24kc.ipk -d </sd> -ash: syntax error: unexpected newline root@HP 4500 SERIES:/# opkg install sslsplit_0.5.5-1_mips_24kc.ipk -d </> -ash: syntax error: unexpected newline root@HP 4500 SERIES:/# opkg install sslsplit_0.5.5-1_mips_24kc.ipk -A Collected errors: * pkg_init_from_file: Malformed package file sslsplit_0.5.5-1_mips_24kc.ipk. root@HP 4500 SERIES:/# opkg upgrade all Unknown package 'all'. root@HP 4500 SERIES:/# opkg upgrade SSLstrip Unknown package 'SSLstrip'. root@HP 4500 SERIES:/# opkg install SSLstrip Unknown package 'SSLstrip'. Collected errors: * opkg_install_cmd: Cannot install package SSLstrip. root@HP 4500 SERIES:/# opkg -v install SSLstrip opkg version dcbc142e51f5f5f2fb9e4e44657e013d3c36a52b (2019-06-14) root@HP 4500 SERIES:/# opkg install SSLstrip -v opkg version dcbc142e51f5f5f2fb9e4e44657e013d3c36a52b (2019-06-14) root@HP 4500 SERIES:/# opkg install SSLstrip -V opkg_conf_parse_file: Loading conf file /etc/opkg.conf. opkg_conf_parse_file: Loading conf file /etc/opkg/customfeeds.conf. opkg_conf_parse_file: Loading conf file /etc/opkg/distfeeds.conf. pkg_hash_load_feeds: pkg_hash_load_feeds: pkg_hash_load_feeds: pkg_hash_load_feeds: pkg_hash_load_status_files: pkg_info_preinstall_check: Updating file owner list. Unknown package 'SSLstrip'. opkg_configure_packages: Configuring unpacked packages. opkg_configure_packages: Reordering packages before configuring them... Collected errors: * opkg_install_cmd: Cannot install package SSLstrip. root@HP 4500 SERIES:/# ls bin overlay sbin usr dev pineapple sd var etc proc sslsplit_0.5.5-1_mips_24kc.ipk www lib rom sys www-getbackup mnt root tmp root@HP 4500 SERIES:/# cd sd root@HP 4500 SERIES:/sd# ls etc lost+found portals tmp lib modules sslsplit_0.5.5-1_mips_24kc.ipk usr root@HP 4500 SERIES:/sd# ls etc lost+found portals tmp lib modules sslsplit_0.5.5-1_mips_24kc.ipk usr root@HP 4500 SERIES:/sd# ls etc lost+found portals tmp lib modules sslsplit_0.5.5-1_mips_24kc.ipk usr root@HP 4500 SERIES:/sd# ls etc lost+found portals tmp lib modules sslsplit_0.5.5-1_mips_24kc.ipk usr root@HP 4500 SERIES:/sd# ls etc lost+found portals tmp lib modules sslsplit_0.5.5-1_mips_24kc.ipk usr root@HP 4500 SERIES:/sd# ls etc lost+found portals tmp lib modules sslsplit_0.5.5-1_mips_24kc.ipk usr root@HP 4500 SERIES:/sd# opkg install SSLstrip -v opkg version dcbc142e51f5f5f2fb9e4e44657e013d3c36a52b (2019-06-14) root@HP 4500 SERIES:/sd# opkg install SSLstrip -V opkg_conf_parse_file: Loading conf file /etc/opkg.conf. opkg_conf_parse_file: Loading conf file /etc/opkg/customfeeds.conf. opkg_conf_parse_file: Loading conf file /etc/opkg/distfeeds.conf. pkg_hash_load_feeds: pkg_hash_load_feeds: pkg_hash_load_feeds: pkg_hash_load_feeds: pkg_hash_load_status_files: pkg_info_preinstall_check: Updating file owner list. Unknown package 'SSLstrip'. opkg_configure_packages: Configuring unpacked packages. opkg_configure_packages: Reordering packages before configuring them... Collected errors: * opkg_install_cmd: Cannot install package SSLstrip. root@HP 4500 SERIES:/sd# cd .. root@HP 4500 SERIES:/# wget https://github.com/adde88/openwrt-useful-tools.git --2019-10-19 06:21:56-- https://github.com/adde88/openwrt-useful-tools.git Resolving github.com... 140.82.114.3 Connecting to github.com|140.82.114.3|:443... connected. HTTP request sent, awaiting response... 301 Moved Permanently Location: https://github.com/adde88/openwrt-useful-tools [following] --2019-10-19 06:21:56-- https://github.com/adde88/openwrt-useful-tools Reusing existing connection to github.com:443. HTTP request sent, awaiting response... 200 OK Length: unspecified [text/html] Saving to: 'openwrt-useful-tools.git' openwrt-useful-tools.git [ <=> ] 94.48K 43.0KB/s in 2.2s 2019-10-19 06:21:59 (43.0 KB/s) - 'openwrt-useful-tools.git' saved [96748] root@HP 4500 SERIES:/# ls bin openwrt-useful-tools.git root tmp dev overlay sbin usr etc pineapple sd var lib proc sslsplit_0.5.5-1_mips_24kc.ipk www mnt rom sys www-getbackup root@HP 4500 SERIES:/# opkg install openwrt-useful-tools.git Unknown package 'openwrt-useful-tools.git'. Collected errors: * opkg_install_cmd: Cannot install package openwrt-useful-tools.git. root@HP 4500 SERIES:/# **```/etc/opkg/customfeeds.conf```** -ash: /etc/opkg/customfeeds.conf: Permission denied -ash: bin: not found root@HP 4500 SERIES:/# sudo opkg install sslsplit_0.5.5-1_mips_24kc.ipk -ash: sudo: not found root@HP 4500 SERIES:/# sudo opkg sslsplit_0.5.5-1_mips_24kc.ipk -ash: sudo: not found root@HP 4500 SERIES:/# su -ash: su: not found root@HP 4500 SERIES:/# cd etc root@HP 4500 SERIES:/etc# ls TZ ethers localtime passwd rc.button sysctl.d banner firewall.user modules-boot.d php.ini rc.common sysupgrade.conf banner.failsafe fstab modules.d php7 rc.d tor board.d group mtab php7-fpm.conf rc.local uci-defaults board.json hosts nginx php7-fpm.d resolv.conf urandom.seed config hotplug-preinit.json openwrt_release pineape services usb-mode.json crontabs hotplug.d openwrt_version pineapple shadow device_info hotplug.json opkg ppp shells diag.sh init.d opkg.conf preinit ssh dnsmasq.conf inittab os-release profile ssl e2fsck.conf iproute2 p0f protocols sysctl.conf root@HP 4500 SERIES:/etc# cd opkg/ root@HP 4500 SERIES:/etc/opkg# ls customfeeds.conf distfeeds.conf keys root@HP 4500 SERIES:/etc/opkg# vim customfeeds.conf root@HP 4500 SERIES:/etc/opkg# opkg update && opkg install sslsplit_0.5.5-1_mips_24kc.ipk -d </sd> -ash: syntax error: unexpected newline root@HP 4500 SERIES:/etc/opkg# opkg update && opkg install sslsplit_0.5.5-1_mips_24kc.ipk -d sd Downloading https://downloads.hak5.org/packages/mk6/1907/Packages.gz Updated list of available packages in /var/opkg-lists/1907_pineapple Downloading http://adde88.asuscomm.com:1080/packages/mips_24kc/custom/Packages.gz *** Failed to download the package list from http://adde88.asuscomm.com:1080/packages/mips_24kc/custom/Packages.gz Downloading https://downloads.openwrt.org/releases/packages-19.07/mips_24kc/base/Packages.gz Updated list of available packages in /var/opkg-lists/1907_base Downloading https://downloads.openwrt.org/releases/packages-19.07/mips_24kc/packages/Packages.gz Updated list of available packages in /var/opkg-lists/1907_packages Downloading https://downloads.openwrt.org/releases/packages-19.07/mips_24kc/routing/Packages.gz Updated list of available packages in /var/opkg-lists/1907_routing Collected errors: * opkg_conf_parse_file: /etc/opkg/customfeeds.conf:4: Ignoring invalid line: ````' * opkg_conf_parse_file: /etc/opkg/customfeeds.conf:7: Ignoring invalid line: ````' * opkg_download: Failed to download http://adde88.asuscomm.com:1080/packages/mips_24kc/custom/Packages.gz, wget returned 4. * opkg_download: Check your network settings and connectivity. root@HP 4500 SERIES:/etc/opkg# vim customfeeds.conf root@HP 4500 SERIES:/etc/opkg# opkg update && opkg install sslsplit_0.5.5-1_mips_24kc.ipk -d sd Downloading https://downloads.hak5.org/packages/mk6/1907/Packages.gz Updated list of available packages in /var/opkg-lists/1907_pineapple Downloading http://adde88.asuscomm.com:1080/packages/mips_24kc/custom/Packages.gz *** Failed to download the package list from http://adde88.asuscomm.com:1080/packages/mips_24kc/custom/Packages.gz Downloading https://downloads.openwrt.org/releases/packages-19.07/mips_24kc/base/Packages.gz Updated list of available packages in /var/opkg-lists/1907_base Downloading https://downloads.openwrt.org/releases/packages-19.07/mips_24kc/packages/Packages.gz Updated list of available packages in /var/opkg-lists/1907_packages Downloading https://downloads.openwrt.org/releases/packages-19.07/mips_24kc/routing/Packages.gz Updated list of available packages in /var/opkg-lists/1907_routing Collected errors: * opkg_download: Failed to download http://adde88.asuscomm.com:1080/packages/mips_24kc/custom/Packages.gz, wget returned 4. * opkg_download: Check your network settings and connectivity. root@HP 4500 SERIES:/etc/opkg# opkg update && opkg install sslsplit_0.5.5-1_mips_24kc.ipk -d /sd Downloading https://downloads.hak5.org/packages/mk6/1907/Packages.gz Updated list of available packages in /var/opkg-lists/1907_pineapple Downloading http://adde88.asuscomm.com:1080/packages/mips_24kc/custom/Packages.gz *** Failed to download the package list from http://adde88.asuscomm.com:1080/packages/mips_24kc/custom/Packages.gz Downloading https://downloads.openwrt.org/releases/packages-19.07/mips_24kc/base/Packages.gz Updated list of available packages in /var/opkg-lists/1907_base Downloading https://downloads.openwrt.org/releases/packages-19.07/mips_24kc/packages/Packages.gz Updated list of available packages in /var/opkg-lists/1907_packages Downloading https://downloads.openwrt.org/releases/packages-19.07/mips_24kc/routing/Packages.gz Updated list of available packages in /var/opkg-lists/1907_routing Collected errors: * opkg_download: Failed to download http://adde88.asuscomm.com:1080/packages/mips_24kc/custom/Packages.gz, wget returned 4. * opkg_download: Check your network settings and connectivity. root@HP 4500 SERIES:/etc/opkg# opkg update && opkg install sslsplit_0.5.5-1_mips_24kc.ipk -d /sd Downloading https://downloads.hak5.org/packages/mk6/1907/Packages.gz Updated list of available packages in /var/opkg-lists/1907_pineapple Downloading http://adde88.asuscomm.com:1080/packages/mips_24kc/custom/Packages.gz *** Failed to download the package list from http://adde88.asuscomm.com:1080/packages/mips_24kc/custom/Packages.gz Downloading https://downloads.openwrt.org/releases/packages-19.07/mips_24kc/base/Packages.gz Updated list of available packages in /var/opkg-lists/1907_base Downloading https://downloads.openwrt.org/releases/packages-19.07/mips_24kc/packages/Packages.gz Updated list of available packages in /var/opkg-lists/1907_packages Downloading https://downloads.openwrt.org/releases/packages-19.07/mips_24kc/routing/Packages.gz Updated list of available packages in /var/opkg-lists/1907_routing Collected errors: * opkg_download: Failed to download http://adde88.asuscomm.com:1080/packages/mips_24kc/custom/Packages.gz, wget returned 4. * opkg_download: Check your network settings and connectivity. root@HP 4500 SERIES:/etc/opkg# opkg upgrade opkg: the ``upgrade'' command requires at least one argument usage: opkg [options...] sub-command [arguments...] where sub-command is one of: Package Manipulation: update Update list of available packages upgrade <pkgs> Upgrade packages install <pkgs> Install package(s) configure <pkgs> Configure unpacked package(s) remove <pkgs|regexp> Remove package(s) flag <flag> <pkgs> Flag package(s) <flag>=hold|noprune|user|ok|installed|unpacked (one per invocation) Informational Commands: list List available packages list-installed List installed packages list-upgradable List installed and upgradable packages list-changed-conffiles List user modified configuration files files <pkg> List files belonging to <pkg> search <file|regexp> List package providing <file> find <regexp> List packages whose name or description matches <regexp> info [pkg|regexp] Display all info for <pkg> status [pkg|regexp] Display all status for <pkg> download <pkg> Download <pkg> to current directory compare-versions <v1> <op> <v2> compare versions using <= < > >= = << >> print-architecture List installable package architectures depends [-A] [pkgname|pat]+ whatdepends [-A] [pkgname|pat]+ whatdependsrec [-A] [pkgname|pat]+ whatrecommends[-A] [pkgname|pat]+ whatsuggests[-A] [pkgname|pat]+ whatprovides [-A] [pkgname|pat]+ whatconflicts [-A] [pkgname|pat]+ whatreplaces [-A] [pkgname|pat]+ Options: -A Query all packages not just those installed -V[<level>] Set verbosity level to <level>. --verbosity[=<level>] Verbosity levels: 0 errors only 1 normal messages (default) 2 informative messages 3 debug 4 debug level 2 -f <conf_file> Use <conf_file> as the opkg configuration file --conf <conf_file> --cache <directory> Use a package cache -d <dest_name> Use <dest_name> as the the root directory for --dest <dest_name> package installation, removal, upgrading. <dest_name> should be a defined dest name from the configuration file, (but can also be a directory name in a pinch). -o <dir> Use <dir> as the root directory for --offline-root <dir> offline installation of packages. --add-arch <arch>:<prio> Register architecture with given priority --add-dest <name>:<path> Register destination with given path Force Options: --force-depends Install/remove despite failed dependencies --force-maintainer Overwrite preexisting config files --force-reinstall Reinstall package(s) --force-overwrite Overwrite files from other package(s) --force-downgrade Allow opkg to downgrade packages --force-space Disable free space checks --force-postinstall Run postinstall scripts even in offline mode --force-remove Remove package even if prerm script fails --force-checksum Don't fail on checksum mismatches --no-check-certificate Don't validate SSL certificates --noaction No action -- test only --download-only No action -- download only --nodeps Do not follow dependencies --nocase Perform case insensitive pattern matching --size Print package size when listing available packages --force-removal-of-dependent-packages Remove package and all dependencies --autoremove Remove packages that were installed automatically to satisfy dependencies -t Specify tmp-dir. --tmp-dir Specify tmp-dir. -l Specify lists-dir. --lists-dir Specify lists-dir. regexp could be something like 'pkgname*' '*file*' or similar e.g. opkg info 'libstd*' or opkg search '*libop*' or opkg remove 'libncur*' root@HP 4500 SERIES:/etc/opkg# opkg upgrade --force-depends opkg: the ``upgrade'' command requires at least one argument usage: opkg [options...] sub-command [arguments...] where sub-command is one of: Package Manipulation: update Update list of available packages upgrade <pkgs> Upgrade packages install <pkgs> Install package(s) configure <pkgs> Configure unpacked package(s) remove <pkgs|regexp> Remove package(s) flag <flag> <pkgs> Flag package(s) <flag>=hold|noprune|user|ok|installed|unpacked (one per invocation) Informational Commands: list List available packages list-installed List installed packages list-upgradable List installed and upgradable packages list-changed-conffiles List user modified configuration files files <pkg> List files belonging to <pkg> search <file|regexp> List package providing <file> find <regexp> List packages whose name or description matches <regexp> info [pkg|regexp] Display all info for <pkg> status [pkg|regexp] Display all status for <pkg> download <pkg> Download <pkg> to current directory compare-versions <v1> <op> <v2> compare versions using <= < > >= = << >> print-architecture List installable package architectures depends [-A] [pkgname|pat]+ whatdepends [-A] [pkgname|pat]+ whatdependsrec [-A] [pkgname|pat]+ whatrecommends[-A] [pkgname|pat]+ whatsuggests[-A] [pkgname|pat]+ whatprovides [-A] [pkgname|pat]+ whatconflicts [-A] [pkgname|pat]+ whatreplaces [-A] [pkgname|pat]+ Options: -A Query all packages not just those installed -V[<level>] Set verbosity level to <level>. --verbosity[=<level>] Verbosity levels: 0 errors only 1 normal messages (default) 2 informative messages 3 debug 4 debug level 2 -f <conf_file> Use <conf_file> as the opkg configuration file --conf <conf_file> --cache <directory> Use a package cache -d <dest_name> Use <dest_name> as the the root directory for --dest <dest_name> package installation, removal, upgrading. <dest_name> should be a defined dest name from the configuration file, (but can also be a directory name in a pinch). -o <dir> Use <dir> as the root directory for --offline-root <dir> offline installation of packages. --add-arch <arch>:<prio> Register architecture with given priority --add-dest <name>:<path> Register destination with given path Force Options: --force-depends Install/remove despite failed dependencies --force-maintainer Overwrite preexisting config files --force-reinstall Reinstall package(s) --force-overwrite Overwrite files from other package(s) --force-downgrade Allow opkg to downgrade packages --force-space Disable free space checks --force-postinstall Run postinstall scripts even in offline mode --force-remove Remove package even if prerm script fails --force-checksum Don't fail on checksum mismatches --no-check-certificate Don't validate SSL certificates --noaction No action -- test only --download-only No action -- download only --nodeps Do not follow dependencies --nocase Perform case insensitive pattern matching --size Print package size when listing available packages --force-removal-of-dependent-packages Remove package and all dependencies --autoremove Remove packages that were installed automatically to satisfy dependencies -t Specify tmp-dir. --tmp-dir Specify tmp-dir. -l Specify lists-dir. --lists-dir Specify lists-dir. regexp could be something like 'pkgname*' '*file*' or similar e.g. opkg info 'libstd*' or opkg search '*libop*' or opkg remove 'libncur*' root@HP 4500 SERIES:/etc/opkg# vim customfeeds.conf root@HP 4500 SERIES:/etc/opkg#
  14. update: Ok so after testing on Linux (newest version of the pineapple) the network adapter is visible, tough currently deauthentication isn't working (on my network) update2: after doing setup on Linux network adapter shows on windows as well update3: deauthentication works when targeting single device while a when targeting a network still doesn't work
  15. I have diffrent problem; clients connects to my pineapple but they are not obtaining any IP's always ( IP )section is NO ip ? how can I fix that ?
  16. +1 to that. Seemed to coincide with the Oakland move.
  17. Yes start in the lower fw version range then try the modules you want to install. I can't vouch for all modules being able to install and work perfectly on each version of firmware you try, but I can say that some work perfectly (possibly most of them or all) on the lower firmware versions before the updates. Keep in mind that the firmware version may be compatible with certain modules, only because Developers of the modules, rewrote or created the modules for that firmware. In example; if said module version is 1.0 and works on firmware 2.5.0. That does not mean the developer recompiled or updates their module to work on firmware 2.5.1. These are extras, so that depend on the creators of such modules, to properly update their creations with each firmware revision “update ".
  18. Basically he is saying you need to check your settings in "networking" section of the "webGUI" ( web graphical user interface). Once logged in on right the menu should have a option labeled "networking". Click on it and look for small section labeled "wifi client mode". It should have a click-able drop down menu labeled “interface". If you have plugged in the extra wifi adapter ( or a compatible one), you should choose "wlan2" and click scan. Sometimes I have click to scan a couple times in order for networks to properly show up (I'm on newest firmware). Once the network is shown in the "access point" click-able drop down input the password and click connect. If you put in correct password, you should now be able to hit "refresh" button after some time has passed. It should eventually now show you a ip address to the access point you are connected to. Now that you have a connection to a (Wan) network you should retry the module installations like you did before. Only this time it should have a list of available modules to put on the device 🙂 Hopefully I didn't use to much jargon and this helps...
  19. it's fine trust me i have an history with overlooking things XD will start with firmware 2.5 on Linux and report status.
  20. Could you direct me to any instructions on how this is typically done? There's no need to install drivers with Kali, works out of the box
  21. Start with firmware 2.5.0, others have had issues with one thing or anotherthing, when on newer versions of the firmware releases. Some issues could be a windows or Linux thing. But some could also be operator error. Anytime you factory reset or reinstall a firmware on these things, if your connecting through wifi you can't rely on any settings in OS that would assist in a automated connection. Not saying this is your fault or problem for sure but sometimes it's the simple things we look over, that also mean much more in the end.
  22. i have some experience with Linux although minimal, i will try to update different image (Version right?) , what version would you recommend\recon is the most stable? thanks for the advice:)
  23. I find it's best to use the nano if you are directly plugging it into a machine, under a Linux OS. You could also try a different update image and retry the firmware install. I'm kind of tired right now and know there is other ways to do the install but can't put my tongue to the correct wording. But anyways, you could always try a android phone with the app to reset things at minimum. If it's giving you a network to connect to try finding the default gateway in cmd prompt using the "ipconfig" command once you connect. The open a browser and connect to the address given to you as the "default gateway" after entering that command under windows cmd prompt. I still don't recommend windows for any tinkering that has to do with this device, but that is obviously just a opinion on my part. Super easy to just load a live USB image to a random drive to try the other way tho 🙂
  24. I'm sorry I was using Text-to-Speech late after work, and I did not proofread the reply. You are correct no rooting is necessary. You can root your phone on Android and then setup the USB port on the phone to only tether once connected to USB in devoloper options on phone. Was supposed to say... You can, I have rooted my phone on Android and when it was setup, the USB connection would tether once set in devoloper options on phone. I still wasn't very specific. But I, was more trying to explain my hardware and software set up. When rereading even the "corrected reply", it still seemed, as if I worded it like rooting was required. Sorry..
  25. root@Pineapple:/pineapple/modules/CursedScreech/includes/forest# python sein.py & root@Pineapple:/pineapple/modules/CursedScreech/includes/forest# Traceback (most recent call last): File "sein.py", line 56, in <module> sck.setsockopt(socket.IPPROTO_IP, socket.IP_ADD_MEMBERSHIP, socket.inet_aton(MCAST_GROUP)+socket.inet_aton(IFACE)) socket.error: illegal IP address string passed to inet_aton Is what I am getting when I try to run it manually from the back end.
  26. Thank you. I was considering using the Packet Squirrel to capture some packets to see if I can obtain any additional info. PS has some VPN capabilities too I think.
  27. Pulled out the Mark 5 for the first time in years. I don't know username and password. I have tried soooo many times and every variation to the factory reset which Ive read all over.... 1) Unpower 2) dip switch 2 and 3 then wait atleast 5 minutes for factory reboot. 3) switch all switches up and reboot. Nothing seems to happen when I do it. I see the normal startup and I can attempt to login to the GUI, but it's always wrong credentials. It feels like my switches aren't working? Please let me know if there is anything else I can try that isn't too technical for me. (If possible...) Thank you all!!!!
  1. Load more activity
×
×
  • Create New...