-
Posts
18 -
Joined
-
Last visited
googleknowsbest's Achievements
Newbie (1/14)
-
All right then. It's working now with the 2 gig card. My issues aren't really solved but hope this can be noted for the future.
-
Fstab Config: config global automount option from_fstab 1 option anon_mount 1 config global autoswap option from_fstab 1 option anon_swap 0 config mount option target /sd option device /dev/sdcard/sd1 option fstype auto option options rw,sync option enabled 1 option enabled_fsck 0 config swap option device /dev/sdcard/sd2 option enabled 1
-
If I put in the 2gb card will it eat that too. I only wanted to save to the sd card. Are there any commands I can try? It shows the card partitioned right in gparted but the main one is unknown. Also the under Resources, Swap keeps jumping around every time I format it. So is it writing or not? Is Fstab an issue or is it not finding the partition? These are the thing that perplex me. Also if I swap out with the 2gb card do I need any files on it or can I just plug it in while it's on. I'm using the mk.5 with eth0 and wlan1 client mode to type this on my desktop.
-
The issue is I can't format my sd card. I just re-flashed but I can't use it for storage and I can't format it because it is write protected if I use gparted. Micro sd cards don't have a switch. Is it corrupted? But I can still see the partitions.
-
So it sets up the linux swap and fat? I'm in gparted right now and it show up as unknown except for the swap. I really need help. Please. Is the mk.5 using the the wrong partitions? I need some help. Is it my Fstab config?
-
Pineapple not installing further infusions.
googleknowsbest replied to factgasm's topic in WiFi Pineapple Mark V
I'm having the same issue. -
If I know what type of file-system the mk.5 used I may be able to erase it. I can't afford tossing micro sd cards like they're nothing.
-
I already tried formatting with 2 tools and they both failed. I tried factory reset no luck. What file system does the mk.5 install to the sd?
-
No not working at all. I can only install infusions to Internal storage.
-
My main issue is the sd card. When I got my Pineapple in the mail today I already knew it came with a 2gb card but I had a spare 8gb card. So the first thing I did was copy the files from the included sd to the 8gb card. I then started installation and all went well. I was able to install a few infusions to the sd card and got it running. I then turned it off. I came back later and the pineapple bar said I had infusions installed but did not see any of them on the home screen. So then I thought it was an issue with the sd card. So I formatted it in USB info. I then reboot the Pineapple and tried to install infusions to the sd card like I did when I first started using it. I can only install to internal storage. I think it is all being used for swap? Guessing the format didn't work I tried formatting the sd with gparted on my computer and saw 2 partitions and a bunch of untouched space. Then I tried a format and got an error(with gparted). Then I tried using the official Sdformatter on windows, it said disable write protection. I just want to install infusions to the space on the sd. Side-note. I noticed the pineapple can run with out the sd card inserted. Another issue is how hot does this thing get? Mine gets quite warm to the touch after a short while. Here is what Main Resources shows: Current Disk Usage: Filesystem Size Used Available Use Mounted on rootfs 4.1M 448.0K 3.6M 11% / /dev/root 11.0M 11.0M 0 100% /rom tmpfs 30.2M 120.0K 30.1M 0% /tmp tmpfs 512.0K 0 512.0K 0% /dev /dev/mtdblock3 4.1M 448.0K 3.6M 11% /overlay overlayfs:/overlay 4.1M 448.0K 3.6M 11% / Current Memory Usage: total used free shared buffers Mem: 61804 32228 29576 0 3508 -/+ buffers: 28720 33084 Swap: 2013192 0 2013192 Please Help! Note: I just tried formatting again in USB info and Swap changed to 4026384. I don't want all swap I just want to install infusions to a sd card partition. Another note: Every time I use format in usb info and refresh the page the swap increases now it's 5032980...6039576....7046172... now at 4026384??? I'm starting to get ticked off.
-
[Payload] Faster UAC Bypass
googleknowsbest replied to Darren Kitchen's topic in Classic USB Rubber Ducky
Dialogue box is not highlighted before the ALT y Win 8 -
Anybody have a cookie vacuming script?
googleknowsbest replied to overwraith's topic in Classic USB Rubber Ducky
Nirsoft has some Browser History and password collectors that dump results to .txt -
I did something like this. I got around the same speeds. Good to know.
-
I had my Rubber Ducky for a while now. I understand that the supplied microSD card is FAT formatted but over time of formatting it (to FAT) I can't read or write from it. Windows tells me to format it but fails to. I tried every formatting method and can't find a solution. As of now I believe it's dead. I have a 8gb microsd(HC) but can't format it to FAT only FAT32. Can someone point me in the direction to a link to buy a FAT microSD card or help me out. Any reply is acceptable.