IOSys Posted January 4, 2010 Share Posted January 4, 2010 Here are the error-codes the USBest-tool throws : 0x10 Disk can't be formated as the selected file system 0x11 Disk mounted flash chips doesn't match the setting 0x12 Disk size doesn't match the setting 0x13 Disk is write-protected 0x14 Disk size is zero 0x28 Run SCSI command Failed 0x41 ISP / CIS blk search Failed 0x42 Build flash LUT Failed 0x44 Bad block count is out of range 0x48 Bad block count exceed tolerance 0x51 Single/Dual channel check Failed 0x52 USB 2.0 check Failed 0x54 Firmware version mismatch with controller type 0x58 Bad block count of table is not match with number of scanned bad block 0x61 Rebuild Flash BAD Blk Failed 0x62 Autorun Image Error 0x64 Sensor Error 0x68 Erase Block Failed 0x72 Initialize ISP Failed 0x74 Check Disk Information Failed 0x78 Update Disk Information Failed 0x82 Flash Manufacture checking error 0x84 Sensor Get Image Failed 0x88 Run Disk Stress R/W Failed 0x91 Clear Hidden Blk Failed 0x92 Source folder doesn't exist or source file is missing 0x94 Check Disk MBR/FAT Failed 0x98 Format Disk Failed 0xa1 Size of source files is large than partition size during running 0xa2 Partition Setting Error 0xa4 Size of source files is large than partition size 0xa8 Copy Files Failed 0x12 Disk size doesn't match the setting Seems like there is a wrong setting somewhere in all the options . The other drive, I have no idea what it really is.. rip it apart if you can and read the markings on the chip, it's the only way to identify the controller to a reasonable degree of certainty as it will identify itself as whatever someone told it to !! Quote Link to comment Share on other sites More sharing options...
abtabdn Posted January 5, 2010 Share Posted January 5, 2010 To bad it doesn't work, these CD+HDD controllers are a bitch to crack .. Any chance of downloading the tool they sent you somewhere, these things are almost impossible to find ? Should work with some other Toshiba, I have no idea which, but it's not the 1tb model I have: http://www.mediafire.com/?xjhmqztz0vj Let me know if you get any ideas Quote Link to comment Share on other sites More sharing options...
slim Posted January 7, 2010 Share Posted January 7, 2010 Hi, I am trying to download the AMECO utility from the flashboot.ru site but it does not work. When I click the download button, I get the challenge and after entering the answer it shows a page in russian with publicity and then comes back to the utility description page. I never get the pop up to save the file. I tried all version of the AMECO MW6208 available but no go. http://translate.googleusercontent.com/tra...s-file-304.html Are others having the same issue at the moment? Thanks. Quote Link to comment Share on other sites More sharing options...
Dean Dean the Dancing Machine Posted January 8, 2010 Share Posted January 8, 2010 Got a 4GB (1GB CDROM and 3GB free) USB drive from BigFix. Chip Genius 3.0 says: ---------------------------------------------------------------------------------------------- Device Name: ++[F:][G:]+USB Mass Storage Device(CBM USB 2.0 USB Device)(CBM USB 2.0 USB Device) PnP Device ID: VID = 1221 PID = 3234 Serial Number: 2009041105120000 Revision: 2.20/2.21 Device Type: Standard USB device - USB2.0 Full-Speed (USB1.1) Chip Vendor: micov Chip Part-Number: MXT8208 Product Vendor: (N/A) Product Model: (N/A) Tools on Web: http://bbs.mydigit.cn/read.php?tid=72332 ---------------------------------------------------------------------- Almost every combo for 1221/3234 in iFlash says Ameco_MW8209_6208E_1.1.1.5_20091015.rar. I downloaded that file from http://www.fenqu.com/Specially/Production/111XKLQH009.html. I opened the RAR and doubleclicked on the UdTools.exe file to execute bring up the application with the title 8209/6208E Tools(Version 1.1.1.5). I've tried this for every manual selected 4GB type there was, but I can't seem to get it to work. In the application I've done: - In the Manuf Setting tab, change the Product Information section to the info above (VID/PID/serial#) - In the Manuf Setting tab, change the Flash Setting information to select Manual and select (different versions) of 4 GB drive types. - Click Apply - Switch to the Manuf Progress Tab - Nothing happens when I click Start All button Can anyone offer any assistance? Did I miss a step? Did I download the wrong program? Thanks, Swill Quote Link to comment Share on other sites More sharing options...
IOSys Posted January 9, 2010 Share Posted January 9, 2010 Maybe your chip is a later revision ? These are the 2 latest (available?) AMECO-tools for 8208 : Ameco MW6208E 8208 1.2.0.6 20090608 (UdTools v1.2.0.6) http://translate.google.com/translate?hl=e...3Fname%3Diflash Ameco MW6208E 8208 1.2.0.8 20090724 (UdTools v1.2.0.8) http://translate.google.com/translate?hl=e...3Fname%3Diflash (the download only works if you allow java-script for google-translate, otherwise you will have to download from the Cyrillic-alphabet page .. ) Usually the latest version works on all previous chip-revisions. EDIT : Device Name: ++[F:][G:]+USB Mass Storage Device(CBM USB 2.0 USB Device)(CBM USB 2.0 USB Device) Hmmmm.... CBM is usually an abbreviation for ChipsBank, another chip-manufacturer . Best way to identify a controller is to disassemble the drive and read the markings on the chip. While you are inside, take note of the markings on the NAND to .. Quote Link to comment Share on other sites More sharing options...
IOSys Posted January 9, 2010 Share Posted January 9, 2010 Hi, I am trying to download the AMECO utility from the flashboot.ru site but it does not work. When I click the download button, I get the challenge and after entering the answer it shows a page in russian with publicity and then comes back to the utility description page. I never get the pop up to save the file. I tried all version of the AMECO MW6208 available but no go. http://translate.googleusercontent.com/tra...s-file-304.html Are others having the same issue at the moment? Thanks. You must allow java-script for both flashboot.ru & google-translate (and possibly even the evil-cookie-of-eternity). At least that fixed it for me :) Quote Link to comment Share on other sites More sharing options...
abtabdn Posted January 12, 2010 Share Posted January 12, 2010 Looks like Toshiba answered my prayers (possibly): http://www.csd.toshiba.com/cgi-bin/tais/su...lFamily=2409110 Similar file that I was sent by that other dev, but a newer version that may work for my drive. I don't really want to test it out immediately (I have 160gb of stuff on it and only 20gb on my hdd) so I can't report any results immediately. Click on "The Desktop External Hard Drive Powers Off and is No Longer Recognized by the Computer" and scroll down, the drive converter link is near the bottom. Apparently there's some other issue that I don't have that has lead to this potential fix. Hopefully this helps someone. Edit: Tested. Worked. Little glitch though, said the firmware failed to install but the drive is operating normally and the virtual cd is gone. Quote Link to comment Share on other sites More sharing options...
IOSys Posted January 12, 2010 Share Posted January 12, 2010 Thanks a lot, I'm sure this will come in handy someday soon .. Quote Link to comment Share on other sites More sharing options...
Dean Dean the Dancing Machine Posted January 20, 2010 Share Posted January 20, 2010 IOSys - Thanks for the suggestions! I tried the newer version (1.2.0.8) of the AMECO tools and tried 2 different versions of the CBM Tools for the 2090 and the 2092. None seemed to recognize the device. I did not want to take it apart cuz that would ruin it :-) At this point, I guess I'm giving up and just using the 3GB free partition. Thanks, Swill Maybe your chip is a later revision ? These are the 2 latest (available?) AMECO-tools for 8208 : Ameco MW6208E 8208 1.2.0.6 20090608 (UdTools v1.2.0.6) http://translate.google.com/translate?hl=e...3Fname%3Diflash Ameco MW6208E 8208 1.2.0.8 20090724 (UdTools v1.2.0.8) http://translate.google.com/translate?hl=e...3Fname%3Diflash (the download only works if you allow java-script for google-translate, otherwise you will have to download from the Cyrillic-alphabet page .. ) Usually the latest version works on all previous chip-revisions. EDIT : Hmmmm.... CBM is usually an abbreviation for ChipsBank, another chip-manufacturer . Best way to identify a controller is to disassemble the drive and read the markings on the chip. While you are inside, take note of the markings on the NAND to .. Quote Link to comment Share on other sites More sharing options...
Dengle Posted April 21, 2010 Share Posted April 21, 2010 IOsys, Got a free flash drive at a career fair. It has a CDFS partition with promotional material. I want to either remove this or change the files on the partition to something useful. It shows as 2 devices in chip genius: Device Name: ++Generic USB Hub(V88 V88 USB Device) PnP Device ID: VID = 0424 PID = 2514 Serial Number: 6&&24ECB5C9&&0&&2 Revision: 5.00 Device Type: Standard USB device - Chip Vendor: (No match record) Chip Part-Number: (No match record) Product Vendor: V88 Product Model: V88 Tools on Web: (N/A) and Device Name: +[O:]+Generic USB Hub(V88 V88 USB Device) PnP Device ID: VID = 413C PID = 5127 Serial Number: 30G6LD1 Revision: 5.00 Device Type: Standard USB device - Chip Vendor: (No match record) Chip Part-Number: (No match record) Product Vendor: V88 Product Model: V88 Tools on Web: (N/A) I opened up the drive and the only markings on the chip say V88 5752-24 any suggestions on how to solve my problem? Thanks Daniel Quote Link to comment Share on other sites More sharing options...
neaghi Posted April 24, 2010 Share Posted April 24, 2010 Hi all! For IOsys, or anybody who know...I want to know if exist a program like Chipgenius, but for SDcard controllers.I try to repair one microSD and i don't know what microcontroler have, and what mass production tool to use.. Many thanks! Quote Link to comment Share on other sites More sharing options...
IOSys Posted April 27, 2010 Share Posted April 27, 2010 @Dengle : Looks like they changed the VID/PID :( I've seen one controller marked "V88 6227-24", it turned out to be a Chipsbank (CBM) controller and this MPT worked : CBM2093 UMPTool v3.3.9.1 091127 . Since the number on yours is lower, try a older MPT-version if that one doesn't work .. @neaghi : Not exactly like Chipgenius but nirsoft's USBDview http://www.nirsoft.net/utils/usb_devices_view.html can show a lot of useful info on all connected (and previously connected !!) usb-devices . Lately there has been a few card-reader MPT's posted @ flashboot . Quote Link to comment Share on other sites More sharing options...
snow2127 Posted June 12, 2010 Share Posted June 12, 2010 (edited) I have a similar problem with a USB Flash Drive which I received from a college. I'd like to remove the CD Partition. Here is the information from the flash drive. Can you assist me in removing this? Thank you!! PnP Device ID: VID = 1E3D PID = 2093 Serial Number: 231102009BC04001 Revision: 5.00/5.00 Device Type: Standard USB device - USB2.0 High-Speed Chip Vendor: (No match record) Chip Part-Number: (No match record) Product Vendor: USB Product Model: 2.0 Flash Disk Tools on Web: (N/A) Edited June 12, 2010 by snow2127 Quote Link to comment Share on other sites More sharing options...
IOSys Posted June 14, 2010 Share Posted June 14, 2010 (edited) Thats a Chipsbank 2093-controller, this is the latest (available) MPT : CBM2093_UMPTool_v3.3.9.1_091127 http://translate.googleusercontent.com/tra...K7Gn2OlnbPynUrA Edited June 14, 2010 by IOSys Quote Link to comment Share on other sites More sharing options...
Guara Posted June 17, 2010 Share Posted June 17, 2010 IOsys, I hope u could help me... I've got a free flash drive at a A/V Technologies fair. It has only a CDFS partition with 42Kb (it starts as a CD Drive) with a autorun link to the website of the enterprise. I want to remove this so i can free all the storage it maybe have inside. I have already search for tools in flahboot.ru and mydigit.cn that can work with my VID & PID, but found nothing. Device Name: +[F:]+USB Mass Storage Device(USB USB Device) PnP Device ID: VID = 1130 PID = 9801 Serial Number: 5&&36111A3&&0&&2 Revision: 1.00 Device Type: Standard USB device - Chip Vendor: (No match record) Chip Part-Number: (No match record) Product Vendor: USB Product Model: Tools on Web: (N/A) Thanks for the attention! Quote Link to comment Share on other sites More sharing options...
IOSys Posted June 18, 2010 Share Posted June 18, 2010 VID 1130 is supposed to be Tenx Technology, Inc. I haven't seen a tool for, or any of, their products yet, but it must exist somewhere since people are loading their own stuff onto the drive .. Best way to identify it is to disassemble the thing and read the markings on the controller-chip . Quote Link to comment Share on other sites More sharing options...
Guara Posted June 18, 2010 Share Posted June 18, 2010 (edited) VID 1130 is supposed to be Tenx Technology, Inc. I haven't seen a tool for, or any of, their products yet, but it must exist somewhere since people are loading their own stuff onto the drive .. Best way to identify it is to disassemble the thing and read the markings on the controller-chip . I opened the flash drive and i think the controller-chip is this: AMTEL901 24C02BN SU27 D (The chip is in a square format and the letters follow this sequence up and down) Images: http://img576.imageshack.us/i/1806101658002.jpg/ http://img197.imageshack.us/i/1806101658003.jpg/ Any ideas now? Edited June 18, 2010 by Guara Quote Link to comment Share on other sites More sharing options...
IOSys Posted June 19, 2010 Share Posted June 19, 2010 (edited) Now THAT was an interesting device :) It looks like an ATMEL eeprom... What's on the other side of that PCB ? You may be able to find some more info here : http://www.atmel.com/ Edited June 19, 2010 by IOSys Quote Link to comment Share on other sites More sharing options...
c2pid Posted July 20, 2010 Share Posted July 20, 2010 Hello. What about VID 058F, and PID 6387 I really need to get rid off that "Auto-Run CD" partition from a promo USB stick. Thanks alot!! Quote Link to comment Share on other sites More sharing options...
mdneilson Posted July 30, 2010 Share Posted July 30, 2010 I tried this version of UT165 UFDUtility v3.2.4.0 and i didn't try the version of the soft that U send with the link http://www.mediafire.com/file/yzvzqmg2z3z/UFDUtility.7z because it was impossible to be extracted from WinRar or 7zip. Anyway i tried "Autorun Manager" and the device cannot be found by the utility. When i tried MPTool (UT163 Multi-Devices Production Tool) v3.9.80.0 and other version of this soft, I followed these steps: 1. I installed the MDPT tool 2. I connected the flash (USBest) and the device was recognized as FABULK device. 3. I pressed F3 to Enumerate the ports and when i pressed start, shows the code 0xa2 with 0MB capacity With UT165 MP Tool 1.65.25.0 the same thing but when i pressed start the code changes from 0x12 0x28 to 0x12 0x28 0xa2 always with 0MB With Super Stick Recovery Tool V1.0.2.19 it shows the size of flash drive 0MB I think that is a broken drive but i need help for another device if U can with the following information by Chip Genius v2.64 Device Name: USB Mass Storage Device(USB DISK 30X USB Device) PnP Device ID: VID = 13FE PID = 1D00 Serial Number: 5&&2B17EFFA&&0&&3 Revision: 1.00 Device Type: Standard USB device - USB2.0 High-Speed Chip Vendor: phison(??) Chip Part-Number: UP8/UP10 --------> chip Genius V3.0: UP13 Product Vendor: USB Product Model: DISK 30X I tried many utilities: Phison UP13 UP14 UP12 V1.96, MP2232 V1.06, MPALL v2.01.00 (recognize the device but shows a mesagge "Flash Status Error") and all of these utilities show the capacity 0MB. I think that may be exist a solution to fix the problem because when i try with Acronis Media for Workstation can recognize the device and even can be formatted but when I plug in it again and try to access shows me a message "Please insert disk into drive". Please if you have any solution please inform me. Thanks for your help and Happy New Year 2010. Best regards Try using this tool... Low level format. http://www.mediafire.com/?tpacci0rx4t0ihl Quote Link to comment Share on other sites More sharing options...
IOSys Posted July 30, 2010 Share Posted July 30, 2010 Hello. What about VID 058F, and PID 6387 I really need to get rid off that "Auto-Run CD" partition from a promo USB stick. Thanks alot!! Assuming it isn't a faked UFD that's a Alcor-controller, tools are here : http://translate.google.com/translate?hl=e...3Fname%3Diflash Quote Link to comment Share on other sites More sharing options...
madkai Posted September 13, 2010 Share Posted September 13, 2010 I opened the flash drive and i think the controller-chip is this: AMTEL901 24C02BN SU27 D (The chip is in a square format and the letters follow this sequence up and down) Images: http://img576.imageshack.us/i/1806101658002.jpg/ http://img197.imageshack.us/i/1806101658003.jpg/ Any ideas now? Now THAT was an interesting device :) It looks like an ATMEL eeprom... What's on the other side of that PCB ? You may be able to find some more info here : http://www.atmel.com/ Some new informations about that now? USBDeview is showing me VID: 1130 and PID 1801 Would be nice to flash it.. Quote Link to comment Share on other sites More sharing options...
Axmin Posted September 29, 2010 Share Posted September 29, 2010 pls help me too guys Here r all the details for my flash drive Quote Link to comment Share on other sites More sharing options...
IOSys Posted September 30, 2010 Share Posted September 30, 2010 VendorID 13fe is supposed to be Phison, they have a tool that should work on most of their controllers, Phison MPALL v3.18.00 http://translate.google.com/translate?hl=e...3Fname%3Diflash Quote Link to comment Share on other sites More sharing options...
zoro Posted October 5, 2010 Share Posted October 5, 2010 (edited) I have another one : Vendor ID : 090c Product ID: 1000 The total size is 4GB Which tool do you recommend ? it seems I can't find the download links for the tools at flashboot.ru Edited October 5, 2010 by zoro Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.