Macgyver16502 Posted June 28, 2017 Share Posted June 28, 2017 Ok, long and short - my Bunny won't run a payload... I'm on firmware 1.3 I downloaded the repository from Git, extracted to Bunny. The payload.txt in switch1 is # System default payload LED B SLOW ATTACKMODE SERIAL STORAGE I unplug the BB set switch to position 1, and plug it in; it shows Green for a couple of seconds then the LED shuts off and nothing... And the BB never shows up as a Flash Drive. BTW, in arming mode it does show up as a flash drive... Any ideas? Is there a way to do a factory reset of the BB? Quote Link to comment Share on other sites More sharing options...
Lord_KamOS Posted June 28, 2017 Share Posted June 28, 2017 Look up firmware recovery https://wiki.bashbunny.com/#!index.md Quote Link to comment Share on other sites More sharing options...
Macgyver16502 Posted June 28, 2017 Author Share Posted June 28, 2017 I had actually tried this before, After 6 plug wait 5 minutes then unplug while in switch position 1 - no recovery. In arming mode, it boots just fine. Is there a way to initial recovery manually? Maybe from the shell? Quote Link to comment Share on other sites More sharing options...
Lord_KamOS Posted June 28, 2017 Share Posted June 28, 2017 7 minutes ago, Macgyver16502 said: Is there a way to initial recovery manually? Maybe from the shell? If you have tried everything from the wiki, and the BB still wont work i suggest you contact hak5 support. Quote Link to comment Share on other sites More sharing options...
b0N3z Posted June 28, 2017 Share Posted June 28, 2017 (edited) switch the bunny to arming mode, then plug it in and i think a green light comes on and if you look really close.... youll see a faint hint of the led wanting to light up as it is booting. unplug it directly after the faint light ( you have to look really close to see it ), do this 3 times and the fourth time you plug it in, it should go red and blue led... DONT UNPLUG THE BUNNY AT THIS POINT.... let it do its thing and it will be back on firmware 1.0. Then update the firmware and try agian. you can go from 1.0 to 1.3 without any problems. this only works on the OS of the bunny. so all your payloads will still be in the library. Edited June 28, 2017 by b0N3z Quote Link to comment Share on other sites More sharing options...
Macgyver16502 Posted June 29, 2017 Author Share Posted June 29, 2017 Ok, for anyone else having this problem... I did the recovery to Firmware 1.0 as b0N3z said. I then updated to Firmware 1.3... And no payloads would run at all. Arming mode would come up and I could SSH in the BB... From SSH i did udisk reformat And that worked, after reformat the payloads run just fine. Why? I don't know. Quote Link to comment Share on other sites More sharing options...
b0N3z Posted June 29, 2017 Share Posted June 29, 2017 Glad you got it working still weird that it did that though. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.