Jump to content

Mark V: WLAN 1 doesn't stay enabled


Supersmi

Recommended Posts

Hi Guys, I have a MARK V and want to use it to broadcast a couple of predefined SSID's. 

If my assumtion is correct, this happens with PineAP by adding SSID's to the list in PineAP tab. 

I've read somewhere that in order to broadcast, WLAN 1 needs to be enabled. Unfortunately when I enable it on the network tile and push the little refresh arrow, it's autamatically disabled and this is getting frustrating :-)

Network[-]
 
 Wlan0
 Wlan1  (This is the one getting me grrrrr)

 
Internet IP: Show

LAN: 172.16.42.1
Wlan1: N/A
Mobile: N/A

So my questions are

1. Do I have the correct assumtion if I want to broadcast a list of SSID'S (on top of the one I harvest)

2. Why is Wlan 1 not getting online.

 

My current setup is that I connected it with ethernet to my router (switch) so it gets an ip to go outside via the router at the moment. 

Here is my ifconfig

br-lan    Link encap:Ethernet  HWaddr 00:13:37:A5:4F:57
          inet addr:172.16.42.1  Bcast:172.16.42.255  Mask:255.255.255.0
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:4211 errors:0 dropped:0 overruns:0 frame:0
          TX packets:4032 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:759034 (741.2 KiB)  TX bytes:2936972 (2.8 MiB)

eth0      Link encap:Ethernet  HWaddr 00:13:37:A5:4F:57
          inet addr:192.168.0.108  Bcast:192.168.0.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:9834 errors:0 dropped:886 overruns:0 frame:0
          TX packets:4478 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:3680238 (3.5 MiB)  TX bytes:866082 (845.7 KiB)
          Interrupt:4

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:836 errors:0 dropped:0 overruns:0 frame:0
          TX packets:836 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:58577 (57.2 KiB)  TX bytes:58577 (57.2 KiB)

wlan0     Link encap:Ethernet  HWaddr 00:13:37:A5:4F:57
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:4210 errors:0 dropped:0 overruns:0 frame:0
          TX packets:4730 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:817968 (798.7 KiB)  TX bytes:3142795 (2.9 MiB)
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...