haso Posted March 12, 2017 Share Posted March 12, 2017 Bash Bunny seems not to work with Windows 8.1 missing drivers or something else, Device Manager not showing COM port / Serial, only shows it as other device CDC Serial tried update driver to bash bunny and does not find drivers. Quote Link to comment Share on other sites More sharing options...
WatskeBart Posted March 12, 2017 Share Posted March 12, 2017 1 hour ago, haso said: Bash Bunny seems not to work with Windows 8.1 missing drivers or something else, Device Manager not showing COM port / Serial, only shows it as other device CDC Serial tried update driver to bash bunny and does not find drivers. Which switch position are you talking about? Quote Link to comment Share on other sites More sharing options...
haso Posted March 13, 2017 Author Share Posted March 13, 2017 4 hours ago, WatskeBart said: Which switch position are you talking about? Arming mode, for PuTTy connect Quote Link to comment Share on other sites More sharing options...
WatskeBart Posted March 13, 2017 Share Posted March 13, 2017 Try creating a payload on switch 1 or 2 with the following text: ATTACKMODE SERIAL Then check if Windows assigns a COM port to the bunny. You can check with the device manager or with the following command in the command prompt: mode Quote Link to comment Share on other sites More sharing options...
~total_blackout~ Posted March 13, 2017 Share Posted March 13, 2017 1 hour ago, WatskeBart said: Try creating a payload on switch 1 or 2 with the following text: ATTACKMODE SERIAL Then check if Windows assigns a COM port to the bunny. You can check with the device manager or with the following command in the command prompt: mode Same issue as OS even after adding "ATTACKMODE SERIAL" to payload.txt file for switch2 (and being in position 2) Quote Link to comment Share on other sites More sharing options...
WatskeBart Posted March 14, 2017 Share Posted March 14, 2017 You could try ATTACKMODE STORAGE as well. I should show up as a USB disk drive. Also have you tried another machine as well? Quote Link to comment Share on other sites More sharing options...
haso Posted March 17, 2017 Author Share Posted March 17, 2017 I tried ATTACKMODE SERIAL and check device manager but still has it labeled as CDC serial other device tried on windows 7 and ubuntu. idk... Quote Link to comment Share on other sites More sharing options...
haso Posted March 18, 2017 Author Share Posted March 18, 2017 i was able to do it in Kali Linux Quote Link to comment Share on other sites More sharing options...
illwill Posted March 23, 2017 Share Posted March 23, 2017 (edited) Violation of CoC Edited October 8, 2017 by illwill Violation of CoC 2 Quote Link to comment Share on other sites More sharing options...
haso Posted March 25, 2017 Author Share Posted March 25, 2017 On 3/23/2017 at 3:33 AM, illwill said: arming mode in Win 8.1 Pro if you if you try to install the driver by browsing to the bashbunnys drive letter you get this Launch an elevated CMD prompt (run as Admin) Type in:bcdedit /set loadoptions DDISABLE_INTEGRITY_CHECKS & bcdedit /set testsigning on and press the ENTER key Try the install again OR Hold the shift key and reboot the computer Click ADVANCED STARTUP and let it reboot After boot, click on ADVANCED OPTIONS > STARTUP SETTINGS Then select DISABLE DRIVER SIGNATURE ENFORCEMENT from the list (#7) The machine will boot and then you can install your unsigned drivers Awesome, Thank you very much for looking into this! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.