nunu Posted February 19, 2017 Share Posted February 19, 2017 Hi, I installed pineapple nano on Kali linux machine (updated firmware). I connected my Pineapple as explained in https://www.youtube.com/watch?v=CrHbEZd4t00. I succeeded to connect, however, I don't have internet access. For example, in the dashboard screen, I can't load Bulletins from WiFiPineapple.com, but I can see probes, SSIDs, etc. On my Kali laptop, the wireless is wlan0. In eth1 (the Pineapple ethernet lan), my IP address is 172.16.42.144. On my Pineapple device, I have only the 172.16.42.1 IP and the lan is called br-lan. I can access one machine from another. The gateway on the Pineapple machine is in 172.16.42.42, but I can't get a ping from this IP from both the Pineapple device and my Kali machine. I tried almost everything almost two days, but still cannot get it work. the output of the route command on the Pineapple, just gives me two rows. The first is default 172.16.42.42, and the second is 172.16.42.0 *. Both are for interface br-lan. I will be glad to get some help. In particular, I would like to know if this is normal that I can't access the 172.16.42.42. (I tried to change it to the Kali's IP address, but it did not help) Thanks in advance! Quote Link to comment Share on other sites More sharing options...
b0N3z Posted February 19, 2017 Share Posted February 19, 2017 $ wget http://www.wifipineapple.com/wp6.sh make it executable and run the script. it will get ICS working. Quote Link to comment Share on other sites More sharing options...
nunu Posted February 19, 2017 Author Share Posted February 19, 2017 2 hours ago, b0N3z said: $ wget http://www.wifipineapple.com/wp6.sh make it executable and run the script. it will get ICS working. I wish it was the case. As I said, I followed the tutorial and used this script. Yet - it does not work. I will be glad to get answer about the 42.42 gateway. Is it normal that I can't ping it? Can someone give an example to his config? (ips and routes for pineapple, laptop and gateway) Quote Link to comment Share on other sites More sharing options...
nunu Posted February 19, 2017 Author Share Posted February 19, 2017 I will also add, that in eth1 in my Kali machine, the default route and the DNS server are set to the the IP of the pineapple device (172.16.42.1). Is this OK? Quote Link to comment Share on other sites More sharing options...
b0N3z Posted February 19, 2017 Share Posted February 19, 2017 no you need to have the wifi or eth0 as primary turn of eth1 which should be the pineapple and then run the wp6.sh again and let me know what it does kali can be a little tricky Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.