Jackie Chank Posted February 10, 2017 Share Posted February 10, 2017 Hello everyone, Just received my nano and I face a problem I can't fix for now. Does anybody had the same ? => Impossible to reach the firmware selection on the wifipineapple web page. What I did I passed the ./wp6.sh which finished nicely with a request to browse 172.16.42.1:1471 I clicked on the first "continue" link, then i pressed the reset button as requested, and clicked the second "Continue" link. From here, the browser is stuck, desperately looking for downloading the page "172.16.42.1:1471/index.php?action=firmwareUpdate" Result I repeated this process many times, but have been stuck the same way each time. Any clue where to look at ? Configuration - Kali in a VirtualBox, OS X as host - eth0 (Internet) has an IP (and ping works) - eth1 (WifiPineApple) also have an IP (172.16.42.42) Quote Link to comment Share on other sites More sharing options...
b0N3z Posted February 11, 2017 Share Posted February 11, 2017 check your network settings and make sure that eth0 is the primary Internet connection and not the nano. Also I dont know if this would matter but make sure you have updated kali. 1 Quote Link to comment Share on other sites More sharing options...
Jackie Chank Posted February 12, 2017 Author Share Posted February 12, 2017 Destination Gateway Mask Indic Metric Ref Use Iface 0.0.0.0 192.168.2.254 0.0.0.0 UG 0 0 0 eth0 172.16.42.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 192.168.1.0 0.0.0.0 255.255.255.0 U 100 0 0 eth0 Thanks for answering b0N3z. Looks like eth0 is primary as I see 0.0.0.0 going to eth0. Kali updated wp6 final msg : "Share Internet Connection from eth0 to wifi pineapple at eth1 through default gateway 192.168.1.254" Still stuck to the second "continue" screen. I start to think it s something crazy stupid or my pineaple is faulty. Quote Link to comment Share on other sites More sharing options...
b0N3z Posted February 12, 2017 Share Posted February 12, 2017 how did you setup WP6.sh? I used Manual over automatic because the automatic messed some things up. Normally your gateway is like 192.168.0.1, 10.0.0.1, 172.16.42.1 . unless you set that IP as your gateway through your router. if your unsure if its the pineapple, then plug it in and run an ifconfig when the blue light goes solid and go to the browser and just type in the 172.16.42.1:1471 and see where you get from there. You won't have ICS but you can see if its the pineapple or just your settings through wp6.sh 1 Quote Link to comment Share on other sites More sharing options...
Jackie Chank Posted February 13, 2017 Author Share Posted February 13, 2017 I finally did it ! Guess what it was ? The delay between the reset and the clic on the web interface, unbelievable… Thank you for support b0N3z, I owe you one! 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.