Gazzer96

Permission Denied (publickey)

7 posts in this topic

I am a complete noob at this, so I could be doing something completely wrong. Just got the Lan turtle today. Plugged it in with a phone charger meeting minimium power requirements and connected it to a PC with an OTG ethernet-to-USB adapter. Had to setup the network connection manually (on Ubuntu 16.10) with: IP - 172.16.84.1, Netmask - 255.255.255.0, Gateway - 192.168.1.1, DNS Servers - 208.67.222.222 and 208.67.220.220.

After that, I check the connection with ifconfig and everything appears to be OK, so I finally tried connecting to the Lan Turtle.

:$ ssh root@172.16.84.1
Permission denied (publickey).

I have setup openssh on a few of my PCs for ssh-key authentication only, but this the first time using the Lan Turtle. Also realised I cannot browse on the internet while it is connected, even with wifi and another wired connection available.

I have searched around to see if there is a fix for this, but I canot find anything.

0

Share this post


Link to post
Share on other sites

Had to setup the network connection manually (on Ubuntu 16.10) with: IP - 172.16.84.1, Netmask - 255.255.255.0, Gateway - 192.168.1.1, DNS Servers - 208.67.222.222 and 208.67.220.220.

 

make sure your ubuntu machine is not on 172.16.84.1   set it to 172.16.84.42

 

0

Share this post


Link to post
Share on other sites
3 minutes ago, m40295 said:

Had to setup the network connection manually (on Ubuntu 16.10) with: IP - 172.16.84.1, Netmask - 255.255.255.0, Gateway - 192.168.1.1, DNS Servers - 208.67.222.222 and 208.67.220.220.

 

make sure your ubuntu machine is not on 172.16.84.1   set it to 172.16.84.42

 

Still got same problem.

0

Share this post


Link to post
Share on other sites

try plugging it into your computer usb port  then use the wp6 python script

To start ics 

 

Or I just  connect directly to my router and ssh in  , never had a issue

 

0

Share this post


Link to post
Share on other sites
9 minutes ago, m40295 said:

try plugging it into your computer usb port  then use the wp6 python script

To start ics 

 

Or I just  connect directly to my router and ssh in  , never had a issue

 

I've got it working now! I just plugged the Ethernet end into the router and the USB into the PC and now I can ssh into it.

0

Share this post


Link to post
Share on other sites

Been looking around for an answer to this. Before I brick my turtle, can I use a regular mobile phone charger (I have a blackberry wall charger that has a USB interface) to power my turtle?

 

0

Share this post


Link to post
Share on other sites
On 12/9/2016 at 11:52 PM, jason001 said:

Been looking around for an answer to this. Before I brick my turtle, can I use a regular mobile phone charger (I have a blackberry wall charger that has a USB interface) to power my turtle?

 

turns out I could :-)

(in case any one else was wondering)

0

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.