Foxtrot Posted July 11, 2016 Share Posted July 11, 2016 This is "Modem Manager", a module created to allow connection to the internet via 3G and 4G USB modems. How to use this module: This module currently only works for modems with Serial Interfaces and Abstract Control Modems (ACM). You can read about modems with serial interfaces here. Support for modems with NCM and QMI may be added at a later date. It's hard for me to implement this support without these types of modems, so if you have a QMI modem please feel free to test some configurations and share your experience. You may also need to reboot your pineapple after setting up your modem in the module. This is to allow the 'usbserial' kernel module to be loaded with the correct VID:PID of your modem. Version 1.1 is out. Link to comment Share on other sites More sharing options...
NotPike Posted July 12, 2016 Share Posted July 12, 2016 Cool! Link to comment Share on other sites More sharing options...
ale Posted July 13, 2016 Share Posted July 13, 2016 Finally Thank you Foxtrot! Link to comment Share on other sites More sharing options...
MarcSThe1st Posted August 12, 2016 Share Posted August 12, 2016 Foxtrot, as I can't find it in the Module Manager: Do you know when it will be available? Link to comment Share on other sites More sharing options...
cheeto Posted August 15, 2016 Share Posted August 15, 2016 FOXTROT, I've been looking forward to this since i bought my NANO. Can't wait to see it. THX!! Link to comment Share on other sites More sharing options...
MarcSThe1st Posted October 22, 2016 Share Posted October 22, 2016 On 12.7.2016 at 1:14 AM, Foxtrot said: Coming Soon :) Hey Foxtrot, I still can't find it in the module section. Any ideas? Link to comment Share on other sites More sharing options...
Foxtrot Posted October 29, 2016 Author Share Posted October 29, 2016 On 22/10/2016 at 9:42 PM, MarcSThe1st said: I still can't find it in the module section. Any ideas? I've been really busy with applying to Universities recently, and balancing real life stuff with writing modules, so the module has dropped down my responsibilities list a little. I also don't have access to a 3G modem anymore, making it really hard for me to see if anything works or not. So here's the deal: I've published all the code I have written so far to a GitHub repo so that anyone with the equipment can pull the module, test it (please!) and make additions if they wish. Instructions to install the module are listed in the "README.md" file, and most of the code is commented. Sorry for not being able to spend more time on the module, I understand that a few of you are waiting on it. Hopefully this will speed things up as again, I don't have a modem to test with anymore. Disregard that, I cook socks. I went and bought a modem and finished this up. 1.1 is on the modem manager now. Regards, Foxtrot Link to comment Share on other sites More sharing options...
cheeto Posted October 31, 2016 Share Posted October 31, 2016 THAT'S WHAT I'M TALKING ABOUT!!! Really looking forward to this addon. Link to comment Share on other sites More sharing options...
cheeto Posted November 1, 2016 Share Posted November 1, 2016 THANK YOU FOXTROT!!!!!!! Modem manager works PERFECTLY on my old 3g dongle!!!!! Great job!! Time to wipe some dust off my NANO :) Link to comment Share on other sites More sharing options...
Foxtrot Posted November 1, 2016 Author Share Posted November 1, 2016 13 minutes ago, cheeto said: THANK YOU FOXTROT!!!!!!! Modem manager works PERFECTLY on my old 3g dongle!!!!! Great job!! Time to wipe some dust off my NANO :) Good to hear! Thanks for being patient. Link to comment Share on other sites More sharing options...
cheeto Posted November 1, 2016 Share Posted November 1, 2016 it was worth the wait buddy!!! :) Link to comment Share on other sites More sharing options...
Foxtrot Posted November 1, 2016 Author Share Posted November 1, 2016 4 minutes ago, cheeto said: it was worth the wait buddy!!! :) Out of curiosity, what modem do you have? Link to comment Share on other sites More sharing options...
cheeto Posted November 1, 2016 Share Posted November 1, 2016 Huawei E173 Link to comment Share on other sites More sharing options...
cheeto Posted November 10, 2016 Share Posted November 10, 2016 Hey guys, I love this module but something came up with it. maybe a bug or something. It won't connect anymore. :( I tried to use it today and I'm getting an error "no ttys found". I tried re-installing the module but I'm getting the same error. The 3G dongle (E173) works perfecty fine when i connect directly to my laptop. So the problem is not the 3g dongle. Anyone else have this issue? Cheers Bus 001 Device 006: ID 12d1:1c05 Huawei Technologies Co., Ltd. E173s 3G broadband stick (modem on) Bus 001 Device 004: ID 05e3:0745 Genesys Logic, Inc. Bus 001 Device 003: ID 0cf3:9271 Atheros Communications, Inc. AR9271 802.11n Bus 001 Device 002: ID 058f:6254 Alcor Micro Corp. USB Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Link to comment Share on other sites More sharing options...
Foxtrot Posted November 10, 2016 Author Share Posted November 10, 2016 4 hours ago, cheeto said: Hey guys, I love this module but something came up with it. maybe a bug or something. It won't connect anymore. :( I tried to use it today and I'm getting an error "no ttys found". I tried re-installing the module but I'm getting the same error. The 3G dongle (E173) works perfecty fine when i connect directly to my laptop. So the problem is not the 3g dongle. Anyone else have this issue? Cheers Bus 001 Device 006: ID 12d1:1c05 Huawei Technologies Co., Ltd. E173s 3G broadband stick (modem on) Bus 001 Device 004: ID 05e3:0745 Genesys Logic, Inc. Bus 001 Device 003: ID 0cf3:9271 Atheros Communications, Inc. AR9271 802.11n Bus 001 Device 002: ID 058f:6254 Alcor Micro Corp. USB Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Post the output of dmesg, ls /dev/ and logread. In spoiler tags, please. Link to comment Share on other sites More sharing options...
cheeto Posted November 10, 2016 Share Posted November 10, 2016 Hey Foxtrot, Thanks for jumping in man. Sorry for my lack of , well everything, hahaha. I'm not too familiar with ssh, so /dev/ and logread. But did do a dmesg. I hope it helps. Please let me know if you need me to test anything, I'd be more than happy to collaborate. Cheers, dmesg root@Pineapple:~# dmesg [ 0.000000] Linux version 3.18.36 (openwrt@651d0feeed27) (gcc version 4.8.3 ( OpenWrt/Linaro GCC 4.8-2014.04 r49403) ) #40 Fri Oct 28 05:42:22 UTC 2016 [ 0.000000] MyLoader: sysp=8a14b024, boardp=44b65156, parts=b69f8d32 [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 00019374 (MIPS 24Kc) [ 0.000000] SoC: Atheros AR9330 rev 1 [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 04000000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x00000000-0x03ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00000000-0x03ffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x03ffffff] [ 0.000000] On node 0 totalpages: 16384 [ 0.000000] free_area_init_node: node 0, pgdat 80355cf0, node_mem_map 8100000 0 [ 0.000000] Normal zone: 128 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 16384 pages, LIFO batch:3 [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag es: 16256 [ 0.000000] Kernel command line: board=PINEAPPLE-NANO console=ttyATH0,11520 0 rootfstype=squashfs,jffs2 noinitrd [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes) [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Memory: 60944K/65536K available (2467K kernel code, 126K rwdata, 528K rodata, 260K init, 188K bss, 4592K reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:51 [ 0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.00 0MHz [ 0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104) [ 0.080000] pid_max: default: 32768 minimum: 301 [ 0.080000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.090000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.100000] NET: Registered protocol family 16 [ 0.100000] MIPS: machine is WiFi Pineapple NANO [ 0.380000] Switched to clocksource MIPS [ 0.380000] NET: Registered protocol family 2 [ 0.390000] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.390000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.400000] TCP: Hash tables configured (established 1024 bind 1024) [ 0.400000] TCP: reno registered [ 0.410000] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.410000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.420000] NET: Registered protocol family 1 [ 0.420000] PCI: CLS 0 bytes, default 32 [ 0.420000] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.440000] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.440000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORIT Y) (c) 2001-2006 Red Hat, Inc. [ 0.450000] msgmni has been set to 119 [ 0.460000] io scheduler noop registered [ 0.460000] io scheduler deadline registered (default) [ 0.470000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled [ 0.470000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11, base_baud = 15 62500) is a AR933X UART [ 0.480000] console [ttyATH0] enabled [ 0.490000] bootconsole [early0] disabled [ 0.500000] m25p80 spi0.0: found mx25l12805d, expected m25p80 [ 0.500000] m25p80 spi0.0: mx25l12805d (16384 Kbytes) [ 0.520000] 5 tp-link partitions found on MTD device spi0.0 [ 0.520000] Creating 5 MTD partitions on "spi0.0": [ 0.520000] 0x000000000000-0x000000020000 : "u-boot" [ 0.530000] 0x000000020000-0x000000134f84 : "kernel" [ 0.540000] 0x000000134f84-0x000000ff0000 : "rootfs" [ 0.540000] mtd: device 2 (rootfs) set to be root filesystem [ 0.550000] 1 squashfs-split partitions found on MTD device rootfs [ 0.550000] 0x000000dc0000-0x000000ff0000 : "rootfs_data" [ 0.560000] 0x000000ff0000-0x000001000000 : "art" [ 0.560000] 0x000000020000-0x000000ff0000 : "firmware" [ 0.590000] libphy: ag71xx_mdio: probed [ 1.190000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd0 41, driver=Generic PHY] [ 1.200000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII [ 1.200000] TCP: cubic registered [ 1.200000] NET: Registered protocol family 17 [ 1.210000] bridge: automatic filtering via arp/ip/ip6tables has been depreca ted. Update your scripts to load br_netfilter if you need this. [ 1.220000] 8021q: 802.1Q VLAN Support v1.8 [ 1.230000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2. [ 1.240000] Freeing unused kernel memory: 260K (8036f000 - 803b0000) [ 2.620000] init: Console is alive [ 2.620000] init: - watchdog - [ 5.290000] usbcore: registered new interface driver usbfs [ 5.300000] usbcore: registered new interface driver hub [ 5.300000] usbcore: registered new device driver usb [ 5.360000] SCSI subsystem initialized [ 5.370000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.380000] ehci-platform: EHCI generic platform driver [ 5.380000] ehci-platform ehci-platform: EHCI Host Controller [ 5.390000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1 [ 5.400000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000 [ 5.420000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00 [ 5.420000] hub 1-0:1.0: USB hub found [ 5.420000] hub 1-0:1.0: 1 port detected [ 5.430000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 5.440000] ohci-platform: OHCI generic platform driver [ 5.450000] uhci_hcd: USB Universal Host Controller Interface driver [ 5.460000] usbcore: registered new interface driver usb-storage [ 5.690000] init: - preinit - [ 5.800000] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 6.390000] random: procd urandom read with 10 bits of entropy available [ 6.390000] hub 1-1:1.0: USB hub found [ 6.400000] hub 1-1:1.0: 4 ports detected [ 6.670000] mount_root: loading kmods from internal overlay [ 6.970000] usb 1-1.1: new high-speed USB device number 3 using ehci-platform [ 7.100000] jffs2: notice: (325) jffs2_build_xattr_subsystem: complete buildi ng xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. [ 7.110000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab [ 7.120000] block: extroot: not configured [ 7.200000] jffs2: notice: (322) jffs2_build_xattr_subsystem: complete buildi ng xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. [ 7.210000] mount_root: loading kmods from internal overlay [ 7.240000] usb 1-1.2: new high-speed USB device number 4 using ehci-platform [ 7.360000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab [ 7.380000] block: extroot: not configured [ 7.380000] mount_root: switching to jffs2 overlay [ 7.400000] usb-storage 1-1.2:1.0: USB Mass Storage device detected [ 7.410000] scsi host0: usb-storage 1-1.2:1.0 [ 7.450000] procd: - early - [ 7.460000] procd: - watchdog - [ 7.600000] usb 1-1.3: new high-speed USB device number 5 using ehci-platform [ 8.050000] usb-storage 1-1.3:1.0: USB Mass Storage device detected [ 8.080000] scsi host1: usb-storage 1-1.3:1.0 [ 8.080000] usb-storage 1-1.3:1.1: USB Mass Storage device detected [ 8.090000] scsi host2: usb-storage 1-1.3:1.1 [ 8.490000] scsi 0:0:0:0: Direct-Access Generic STORAGE DEVICE 0933 PQ : 0 ANSI: 6 [ 8.590000] procd: - ubus - [ 8.840000] sd 0:0:0:0: [sda] 31116288 512-byte logical blocks: (15.9 GB/14.8 GiB) [ 8.860000] sd 0:0:0:0: [sda] Write Protect is off [ 8.860000] sd 0:0:0:0: [sda] Mode Sense: 21 00 00 00 [ 8.860000] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doe sn't support DPO or FUA [ 8.890000] sda: sda1 sda2 [ 8.910000] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 9.080000] scsi 1:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ : 0 ANSI: 2 [ 9.090000] scsi 2:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ : 0 ANSI: 2 [ 9.110000] sd 2:0:0:0: [sdb] 15949824 512-byte logical blocks: (8.16 GB/7.60 GiB) [ 9.110000] sd 2:0:0:0: [sdb] Write Protect is off [ 9.120000] sd 2:0:0:0: [sdb] Mode Sense: 0f 00 00 00 [ 9.130000] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, does n't support DPO or FUA [ 9.610000] procd: - init - [ 9.830000] sdb: sdb1 [ 9.850000] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 13.080000] usb 1-1.3: USB disconnect, device number 5 [ 13.100000] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [ 13.100000] sd 2:0:0:0: [sdb] [ 13.100000] Result: hostbyte=0x01 driverbyte=0x00 [ 14.080000] Loading modules backported from Linux version v4.4-rc5-1913-gc8fd f68 [ 14.080000] Backport generated by backports.git backports-20151218-0-g2f58d9d [ 14.460000] ath: EEPROM regdomain: 0x0 [ 14.460000] ath: EEPROM indicates default country code should be used [ 14.460000] ath: doing EEPROM country->regdmn map search [ 14.460000] ath: country maps to regdmn code: 0x3a [ 14.460000] ath: Country alpha2 being used: US [ 14.460000] ath: Regpair used: 0x3a [ 14.470000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 14.470000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2 [ 14.500000] usb 1-1.1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw reques ted [ 14.510000] usbcore: registered new interface driver ath9k_htc [ 14.600000] RPC: Registered named UNIX socket transport module. [ 14.600000] RPC: Registered udp transport module. [ 14.600000] RPC: Registered tcp transport module. [ 14.610000] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 14.650000] tun: Universal TUN/TAP device driver, 1.6 [ 14.650000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 14.720000] usbcore: registered new interface driver rt2800usb [ 14.750000] usbcore: registered new interface driver rtl8187 [ 14.820000] usbcore: registered new interface driver rtl8192cu [ 14.870000] usb 1-1.1: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw , size: 51008 [ 14.940000] usbserial: `0x' invalid for parameter `vendor' [ 14.960000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 14.970000] usbserial: `0x' invalid for parameter `vendor' [ 14.990000] usbserial: `0x' invalid for parameter `vendor' [ 15.010000] usbcore: registered new interface driver cdc_acm [ 15.020000] cdc_acm: USB Abstract Control Model driver for USB modems and ISD N adapters [ 15.030000] usbcore: registered new interface driver cdc_wdm [ 15.060000] nf_conntrack version 0.5.0 (956 buckets, 3824 max) [ 15.120000] usbcore: registered new interface driver ums-alauda [ 15.130000] usbcore: registered new interface driver ums-cypress [ 15.130000] ath9k_htc 1-1.1:1.0: ath9k_htc: HTC initialized with 33 credits [ 15.140000] usbcore: registered new interface driver ums-datafab [ 15.150000] usbcore: registered new interface driver ums-freecom [ 15.160000] usbcore: registered new interface driver ums-isd200 [ 15.170000] usbcore: registered new interface driver ums-jumpshot [ 15.180000] usbcore: registered new interface driver ums-karma [ 15.190000] usbcore: registered new interface driver ums-sddr09 [ 15.210000] usbcore: registered new interface driver ums-sddr55 [ 15.230000] usbcore: registered new interface driver ums-usbat [ 15.250000] usbserial: `0x' invalid for parameter `vendor' [ 15.330000] xt_time: kernel timezone is -0000 [ 15.340000] usbcore: registered new interface driver asix [ 15.350000] usbcore: registered new interface driver ax88179_178a [ 15.380000] usbcore: registered new interface driver cdc_ether [ 15.390000] ip_tables: (C) 2000-2006 Netfilter Core Team [ 15.460000] PPP generic driver version 2.4.2 [ 15.470000] NET: Registered protocol family 24 [ 15.480000] usbcore: registered new interface driver qmi_wwan [ 15.490000] usbcore: registered new interface driver rndis_host [ 15.520000] usbcore: registered new interface driver sierra_net [ 15.530000] usbserial: `0x' invalid for parameter `vendor' [ 15.560000] usbserial: `0x' invalid for parameter `vendor' [ 15.580000] usbserial: `0x' invalid for parameter `vendor' [ 15.640000] random: nonblocking pool is initialized [ 15.720000] ath9k_htc 1-1.1:1.0: ath9k_htc: FW Version: 1.4 [ 15.730000] ath9k_htc 1-1.1:1.0: FW RMW support: On [ 15.730000] ath: EEPROM regdomain: 0x0 [ 15.730000] ath: EEPROM indicates default country code should be used [ 15.730000] ath: doing EEPROM country->regdmn map search [ 15.730000] ath: country maps to regdmn code: 0x3a [ 15.730000] ath: Country alpha2 being used: US [ 15.730000] ath: Regpair used: 0x3a [ 15.740000] ieee80211 phy1: Atheros AR9271 Rev:1 [ 15.870000] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibi lities [ 15.890000] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibi lities [ 15.940000] EXT4-fs (sda1): recovery complete [ 15.940000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 16.220000] Adding 1004024k swap on /dev/sdcard/sd2. Priority:-1 extents:1 a cross:1004024k [ 19.530000] usb 1-1.3: new high-speed USB device number 6 using ehci-platform [ 20.140000] usb-storage 1-1.3:1.3: USB Mass Storage device detected [ 20.150000] scsi host3: usb-storage 1-1.3:1.3 [ 20.150000] usb-storage 1-1.3:1.4: USB Mass Storage device detected [ 20.160000] scsi host4: usb-storage 1-1.3:1.4 [ 22.500000] scsi 3:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ : 0 ANSI: 2 [ 22.510000] scsi 3:0:0:0: Attached scsi generic sg1 type 5 [ 22.510000] scsi 4:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ : 0 ANSI: 2 [ 22.520000] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 22.530000] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 22.820000] sd 4:0:0:0: [sdb] 15949824 512-byte logical blocks: (8.16 GB/7.60 GiB) [ 22.820000] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, does n't support DPO or FUA [ 22.860000] sdb: sdb1 [ 27.840000] device eth0 entered promiscuous mode [ 32.610000] eth0: link up (100Mbps/Full duplex) [ 32.610000] br-lan: port 1(eth0) entered forwarding state [ 32.620000] br-lan: port 1(eth0) entered forwarding state [ 34.620000] br-lan: port 1(eth0) entered forwarding state [ 35.720000] device wlan0 entered promiscuous mode [ 35.940000] br-lan: port 2(wlan0) entered forwarding state [ 35.950000] br-lan: port 2(wlan0) entered forwarding state [ 36.020000] device wlan0-1 entered promiscuous mode [ 36.020000] br-lan: port 3(wlan0-1) entered forwarding state [ 36.030000] br-lan: port 3(wlan0-1) entered forwarding state [ 36.690000] br-lan: port 3(wlan0-1) entered disabled state [ 37.210000] eth0: link down [ 37.950000] br-lan: port 2(wlan0) entered forwarding state [ 38.310000] br-lan: port 1(eth0) entered disabled state [ 39.340000] eth0: link up (100Mbps/Full duplex) [ 39.350000] br-lan: port 1(eth0) entered forwarding state [ 39.360000] br-lan: port 1(eth0) entered forwarding state [ 39.610000] br-lan: port 3(wlan0-1) entered forwarding state [ 39.620000] br-lan: port 3(wlan0-1) entered forwarding state [ 41.360000] br-lan: port 1(eth0) entered forwarding state [ 41.620000] br-lan: port 3(wlan0-1) entered forwarding state root@Pineapple:~# root@Pineapple:~# root@Pineapple:~# dmesg [ 0.000000] Linux version 3.18.36 (openwrt@651d0feeed27) (gcc version 4.8.3 ( OpenWrt/Linaro GCC 4.8-2014.04 r49403) ) #40 Fri Oct 28 05:42:22 UTC 2016 [ 0.000000] MyLoader: sysp=8a14b024, boardp=44b65156, parts=b69f8d32 [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 00019374 (MIPS 24Kc) [ 0.000000] SoC: Atheros AR9330 rev 1 [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 04000000 @ 00000000 (usable) -ash: root@Pineapple:~#: not found root@Pineapple:~# [ 0.000000] Linux version 3.18.36 (openwrt@651d0feeed27) (g cc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r49403) ) #40 Fri Oct 28 05:42: 22 UTC 2016 -ash: syntax error: unexpected "(" root@Pineapple:~# [ 0.000000] MyLoader: sysp=8a14b024, boardp=44b65156, parts =b69f8d32 ash: missing ] root@Pineapple:~# [ 0.000000] bootconsole [early0] enabled ash: missing ] root@Pineapple:~# [ 0.000000] CPU0 revision is: 00019374 (MIPS 24Kc) -ash: syntax error: unexpected "(" root@Pineapple:~# [ 0.000000] SoC: Atheros AR9330 rev 1 ash: missing ] root@Pineapple:~# [ 0.000000] Determined physical RAM map: ash: missing ] root@Pineapple:~# [ 0.000000] memory: 04000000 @ 00000000 (usable) -ash: syntax error: unexpected "(" root@Pineapple:~# [ 0.000000] Initrd not found or empty - disabling initrd ash: missing ] root@Pineapple:~# [ 0.000000] Zone ranges: ash: missing ] root@Pineapple:~# [ 0.000000] Normal [mem 0x00000000-0x03ffffff] ash: missing ] root@Pineapple:~# [ 0.000000] Movable zone start for each node ash: missing ] root@Pineapple:~# [ 0.000000] Early memory node ranges ash: missing ] root@Pineapple:~# [ 0.000000] node 0: [mem 0x00000000-0x03ffffff] ash: missing ] root@Pineapple:~# [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x03ffffff ] ash: missing ] root@Pineapple:~# [ 0.000000] On node 0 totalpages: 16384 ash: missing ] root@Pineapple:~# [ 0.000000] free_area_init_node: node 0, pgdat 80355cf0, no de_mem_map 81000000 ash: missing ] root@Pineapple:~# [ 0.000000] Normal zone: 128 pages used for memmap ash: missing ] root@Pineapple:~# [ 0.000000] Normal zone: 0 pages reserved ash: missing ] root@Pineapple:~# [ 0.000000] Normal zone: 16384 pages, LIFO batch:3 ash: missing ] root@Pineapple:~# [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, li nesize 32 bytes. ash: missing ] root@Pineapple:~# [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache ali ases, linesize 32 bytes ash: missing ] root@Pineapple:~# [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 ash: missing ] root@Pineapple:~# [ 0.000000] pcpu-alloc: [0] 0 ash: missing ] root@Pineapple:~# [ 0.000000] Built 1 zonelists in Zone order, mobility group ing on. Total pages: 16256 ash: missing ] root@Pineapple:~# [ 0.000000] Kernel command line: board=PINEAPPLE-NANO con sole=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd ash: missing ] root@Pineapple:~# [ 0.000000] PID hash table entries: 256 (order: -2, 1024 by tes) -ash: syntax error: unexpected "(" root@Pineapple:~# [ 0.000000] Dentry cache hash table entries: 8192 (order: 3 , 32768 bytes) -ash: syntax error: unexpected "(" root@Pineapple:~# [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) -ash: syntax error: unexpected "(" root@Pineapple:~# [ 0.000000] Writing ErrCtl register=00000000 ash: missing ] root@Pineapple:~# [ 0.000000] Readback ErrCtl register=00000000 ash: missing ] root@Pineapple:~# [ 0.000000] Memory: 60944K/65536K available (2467K kernel c ode, 126K rwdata, 528K rodata, 260K init, 188K bss, 4592K reserved) -ash: syntax error: unexpected "(" root@Pineapple:~# [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs =1, Nodes=1 ash: missing ] root@Pineapple:~# [ 0.000000] NR_IRQS:51 ash: missing ] root@Pineapple:~# [ 0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200 .000MHz, Ref:25.000MHz ash: missing ] root@Pineapple:~# [ 0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj= 1327104) -ash: syntax error: unexpected "(" root@Pineapple:~# [ 0.080000] pid_max: default: 32768 minimum: 301 ash: missing ] root@Pineapple:~# [ 0.080000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) -ash: syntax error: unexpected "(" root@Pineapple:~# [ 0.090000] Mountpoint-cache hash table entries: 1024 (orde r: 0, 4096 bytes) -ash: syntax error: unexpected "(" root@Pineapple:~# [ 0.100000] NET: Registered protocol family 16 ash: missing ] root@Pineapple:~# [ 0.100000] MIPS: machine is WiFi Pineapple NANO ash: missing ] root@Pineapple:~# [ 0.380000] Switched to clocksource MIPS ash: missing ] root@Pineapple:~# [ 0.380000] NET: Registered protocol family 2 ash: missing ] root@Pineapple:~# [ 0.390000] TCP established hash table entries: 1024 (order : 0, 4096 bytes) -ash: syntax error: unexpected "(" root@Pineapple:~# [ 0.390000] TCP bind hash table entries: 1024 (order: 0, 40 96 bytes) -ash: syntax error: unexpected "(" root@Pineapple:~# [ 0.400000] TCP: Hash tables configured (established 1024 b ind 1024) -ash: syntax error: unexpected "(" root@Pineapple:~# [ 0.400000] TCP: reno registered ash: missing ] root@Pineapple:~# [ 0.410000] UDP hash table entries: 256 (order: 0, 4096 byt es) -ash: syntax error: unexpected "(" root@Pineapple:~# [ 0.410000] UDP-Lite hash table entries: 256 (order: 0, 409 6 bytes) -ash: syntax error: unexpected "(" root@Pineapple:~# [ 0.420000] NET: Registered protocol family 1 ash: missing ] root@Pineapple:~# [ 0.420000] PCI: CLS 0 bytes, default 32 ash: missing ] [ 5.360000] SCSI subsystem initialized root@Pineapple:~# [ 0.420000] futex hash table entries: 256 (order: -1, 3072 bytes) -ash: syntax error: unexpected "(" root@Pineapple:~# [ 0.440000] squashfs: version 4.0 (2009/01/31) Phillip Loug her -ash: syntax error: unexpected "(" root@Pineapple:~# [ 0.440000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTI ME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. -ash[ 5.690000] init: - preinit - : [ 5.800000] usb 1-1: new high-speed USB device number 2 using ehci-platform syntax error: unexpected "(" root@Pineapple:~# [ 0.450000] msgmni has been set to 119 ash: missing ] root@Pineapple:~# [ 0.460000] io scheduler noop registered ash: missing ] root@Pineapple:~# [ 0.460000] io scheduler deadline registered (default) -ash: syntax error: unexpected "(" root@Pineapple:~# [ 0.470000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled ash: missing ] root@Pineapple:~# [ 0.470000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11, base_baud = 1562500) is a AR933X UART -ash: syntax error: unexpected "(" root@Pineapple:~# [ 0.480000] console [ttyATH0] enabled ash: missing ] root@Pineapple:~# [ 0.490000] bootconsole [early0] disabled ash: missing ] root@Pineapple:~# [ 0.500000] m25p80 spi0.0: found mx25l12805d, expected m25p 80 ash: missing ] root@Pineapple:~# [ 0.500000] m25p80 spi0.0: mx25l12805d (16384 Kbytes) -ash: syntax error: unexpected "(" root@Pineapple:~# [ 0.520000] 5 tp-link partitions found on MTD device spi0.0 ash: missing ] root@Pineapple:~# [ 0.520000] Creating 5 MTD partitions on "spi0.0": ash: missing ] root@Pineapple:~# [ 0.520000] 0x000000000000-0x000000020000 : "u-boot" ash: missing ] root@Pineapple:~# [ 0.530000] 0x000000020000-0x000000134f84 : "kernel" ash: missing ] root@Pineapple:~# [ 0.540000] 0x000000134f84-0x000000ff0000 : "rootfs" [ 7.210000] mount_root: loading kmods from internal overlay ash: missing ] [ 7.240000] usb 1-1.2: new high-speed USB device number 4 using ehci-platform root@Pineapple:~# [ 0.540000] mtd: device 2 (rootfs) set to be root filesyste m -ash: syntax error: unexpected "(" root@Pineapple:~# [ 0.550000] 1 squashfs-split partitions found on MTD device rootfs ash: missing ] root@Pineapple:~# [ 0.550000] 0x000000dc0000-0x000000ff0000 : "rootfs_data" ash: missing ] root@Pineapple:~# [ 0.560000] 0x000000ff0000-0x000001000000 : "art" ash: missing ] root@Pineapple:~# [ 0.560000] 0x000000020000-0x000000ff0000 : "firmware" ash: missing ] root@Pineapple:~# [ 0.590000] libphy: ag71xx_mdio: probed ash: missing ] root@Pineapple:~# [ 1.190000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdi o.1:04 [uid=004dd041, driver=Generic PHY] ash: missing ] root@Pineapple:~# [ 1.200000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode :MII ash: missing ] root@Pineapple:~# [ 1.200000] TCP: cubic registered ash: missing ] root@Pineapple:~# [ 1.200000] NET: Registered protocol family 17 ash: missing ] root@Pineapple:~# [ 1.210000] bridge: automatic filtering via arp/ip/ip6table s has been deprecated. Update your scripts to load br_netfilter if you need this . ash: missing ] root@Pineapple:~# [ 1.220000] 8021q: 802.1Q VLAN Support v1.8 ash: missing ] root@Pineapple:~# [ 1.230000] VFS: Mounted root (squashfs filesystem) readonl y on device 31:2. -ash: syntax error: unexpected "(" root@Pineapple:~# [ 1.240000] Freeing unused kernel memory: 260K (8036f000 - 803b0000) -ash: syntax error: unexpected "(" root@Pineapple:~# [ 2.620000] init: Console is alive ash: missing ] root@Pineapple:~# [ 2.620000] init: - watchdog - ash: missing ] root@Pineapple:~# [ 5.290000] usbcore: registered new interface driver usbfs ash: missing ] root@Pineapple:~# [ 5.300000] usbcore: registered new interface driver hub ash: missing ] root@Pineapple:~# [ 5.300000] usbcore: registered new device driver usb ash: missing ] root@Pineapple:~# [ 5.360000] SCSI subsystem initialized ash: missing ] root@Pineapple:~# [ 5.370000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (E HCI) Driver -ash: syntax error: unexpected "(" root@Pineapple:~# [ 5.380000] ehci-platform: EHCI generic platform driver ash: missing ] root@Pineapple:~# [ 5.380000] ehci-platform ehci-platform: EHCI Host Controll er ash: missing ] root@Pineapple:~# [ 5.390000] ehci-platform ehci-platform: new USB bus regist ered, assigned bus number 1 ash: missing ] root@Pineapple:~# [ 5.400000] ehci-platform ehci-platform: irq 3, io mem 0x1b 000000 ash: missing ] root@Pineapple:~# [ 5.420000] ehci-platform ehci-platform: USB 2.0 started, E HCI 1.00 ash: missing ] root@Pineapple:~# [ 5.420000] hub 1-0:1.0: USB hub found ash: missing ] root@Pineapple:~# [ 5.420000] hub 1-0:1.0: 1 port detected ash: missing ] root@Pineapple:~# [ 5.430000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver -ash: syntax error: unexpected "(" root@Pineapple:~# [ 5.440000] ohci-platform: OHCI generic platform driver ash: missing ] root@Pineapple:~# [ 5.450000] uhci_hcd: USB Universal Host Controller Interfa ce driver ash: missing ] root@Pineapple:~# [ 5.460000] usbcore: registered new interface driver usb-st orage ash: missing ] root@Pineapple:~# [ 5.690000] init: - preinit - ash: missing ] root@Pineapple:~# [ 5.800000] usb 1-1: new high-speed USB device number 2 usi ng ehci-platform ash: missing ] root@Pineapple:~# [ 6.390000] random: procd urandom read with 10 bits of entr opy available ash: missing ] root@Pineapple:~# [ 6.390000] hub 1-1:1.0: USB hub found ash: missing ] root@Pineapple:~# [ 6.400000] hub 1-1:1.0: 4 ports detected ash: missing ] root@Pineapple:~# [ 6.670000] mount_root: loading kmods from internal overlay ash: missing ] root@Pineapple:~# [ 6.970000] usb 1-1.1: new high-speed USB device number 3 u sing ehci-platform ash: missing ] root@Pineapple:~# [ 7.100000] jffs2: notice: (325) jffs2_build_xattr_subsyste m: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. -ash: syntax error: unexpected "(" root@Pineapple:~# [ 7.110000] block: attempting to load /tmp/jffs_cfg/upper/e tc/config/fstab ash: missing ] root@Pineapple:~# [ 7.120000] block: extroot: not configured ash: missing ] root@Pineapple:~# [ 7.200000] jffs2: notice: (322) jffs2_build_xattr_subsyste m: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. -ash: syntax error: unexpected "(" root@Pineapple:~# [ 7.210000] mount_root: loading kmods from internal overlay ash: missing ] root@Pineapple:~# [ 7.240000] usb 1-1.2: new high-speed USB device number 4 u sing ehci-platform ash: missing ] root@Pineapple:~# [ 7.360000] block: attempting to load /tmp/jffs_cfg/upper/e tc/config/fstab ash: missing ] root@Pineapple:~# [ 7.380000] block: extroot: not configured ash: missing ] root@Pineapple:~# [ 7.380000] mount_root: switching to jffs2 overlay [ 14.870000] usb 1-1.1: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw , size: 51008 ash: missing ] root@Pineapple:~# [ 7.400000] usb-storage 1-1.2:1.0: USB Mass Storage device detected ash: missing ] root@Pineapple:~# [ 7.410000] scsi host0: usb-storage 1-1.2:1.0 ash: missing ] root@Pineapple:~# [ 7.450000] procd: - early - ash: missing ] root@Pineapple:~# [ 7.460000] procd: - watchdog - ash: missing ] root@Pineapple:~# [ 7.600000] usb 1-1.3: new high-speed USB device number 5 u sing ehci-platform ash: missing ] root@Pineapple:~# [ 8.050000] usb-storage 1-1.3:1.0: USB Mass Storage device detected ash: missing ] root@Pineapple:~# [ 8.080000] scsi host1: usb-storage 1-1.3:1.0 ash: missing ] root@Pineapple:~# [ 8.080000] usb-storage 1-1.3:1.1: USB Mass Storage device detected ash: missing ] root@Pineapple:~# [ 8.090000] scsi host2: usb-storage 1-1.3:1.1 ash: missing ] root@Pineapple:~# [ 8.490000] scsi 0:0:0:0: Direct-Access Generic STORAG E DEVICE 0933 PQ: 0 ANSI: 6 ash: missing ] root@Pineapple:~# [ 8.590000] procd: - ubus - ash: missing ] root@Pineapple:~# [ 8.840000] sd 0:0:0:0: [sda] 31116288 512-byte logical blo cks: (15.9 GB/14.8 GiB) -ash: syntax error: unexpected "(" root@Pineapple:~# [ 8.860000] sd 0:0:0:0: [sda] Write Protect is off ash: missing ] root@Pineapple:~# [ 8.860000] sd 0:0:0:0: [sda] Mode Sense: 21 00 00 00 ash: missing ] root@Pineapple:~# [ 8.860000] sd 0:0:0:0: [sda] Write cache: disabled, read c ache: enabled, doesn't support DPO or FUA > [ 8.890000] sda: sda1 sda2 > [ 8.910000] sd 0:0:0:0: [sda] Attached SCSI removable disk > [ 9.080000] scsi 1:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 > [ 9.090000] scsi 2:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2 > [ 9.110000] sd 2:0:0:0: [sdb] 15949824 512-byte logical blocks: (8.16 GB/7. 60 GiB) > [ 9.110000] sd 2:0:0:0: [sdb] Write Protect is off > [ 9.120000] sd 2:0:0:0: [sdb] Mode Sense: 0f 00 00 00 > [ 9.130000] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, do esn't support DPO or FUA ash: missing ] root@Pineapple:~# [ 9.610000] procd: - init - ash: missing ] root@Pineapple:~# [ 9.830000] sdb: sdb1 ash: missing ] root@Pineapple:~# [ 9.850000] sd 2:0:0:0: [sdb] Attached SCSI removable disk ash: missing ] root@Pineapple:~# [ 13.080000] usb 1-1.3: USB disconnect, device number 5 ash: missing ] root@Pineapple:~# [ 13.100000] sd 2:0:0:0: [sdb] Synchronizing SCSI cache ash: missing ] root@Pineapple:~# [ 13.100000] sd 2:0:0:0: [sdb] ash: missing ] root@Pineapple:~# [ 13.100000] Result: hostbyte=0x01 driverbyte=0x00 ash: missing ] root@Pineapple:~# [ 14.080000] Loading modules backported from Linux version v 4.4-rc5-1913-gc8fdf68 ash: missing ] root@Pineapple:~# [ 14.080000] Backport generated by backports.git backports-2 0151218-0-g2f58d9d ash: missing ] root@Pineapple:~# [ 14.460000] ath: EEPROM regdomain: 0x0 ash: missing ] root@Pineapple:~# [ 14.460000] ath: EEPROM indicates default country code shou ld be used ash: missing ] root@Pineapple:~# [ 14.460000] ath: doing EEPROM country->regdmn map search ash: missing ] root@Pineapple:~# [ 14.460000] ath: country maps to regdmn code: 0x3a ash: missing ] root@Pineapple:~# [ 14.460000] ath: Country alpha2 being used: US ash: missing ] root@Pineapple:~# [ 14.460000] ath: Regpair used: 0x3a ash: missing ] root@Pineapple:~# [ 14.470000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' ash: missing ] root@Pineapple:~# [ 14.470000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb810 0000, irq=2 ash: missing ] root@Pineapple:~# [ 14.500000] usb 1-1.1: ath9k_htc: Firmware ath9k_htc/htc_92 71-1.4.0.fw requested [ 15.380000] usbcore: registered new interface driver cdc_ether ash: missing ] [ 15.390000] ip_tables: (C) 2000-2006 Netfilter Core Team [ 15.460000] PPP generic driver version 2.4.2 root@Pineapple:~# [ 14.510000] usbcore: registered new interface driver ath9k_ htc ash: missing ] root@Pineapple:~# [ 14.600000] RPC: Registered named UNIX socket transport mod ule. ash: missing ] root@Pineapple:~# [ 14.600000] RPC: Registered udp transport module. ash: missing ] root@Pineapple:~# [ 14.600000] RPC: Registered tcp transport module. ash: missing ] root@Pineapple:~# [ 14.610000] RPC: Registered tcp NFSv4.1 backchannel transpo rt module. ash: missing ] root@Pineapple:~# [ 14.650000] tun: Universal TUN/TAP device driver, 1.6 ash: missing ] root@Pineapple:~# [ 14.650000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualco mm.com> -ash: syntax error: unexpected "(" root@Pineapple:~# [ 14.720000] usbcore: registered new interface driver rt2800 usb ash: missing ] root@Pineapple:~# [ 14.750000] usbcore: registered new interface driver rtl818 7 ash: missing ] root@Pineapple:~# [ 14.820000] usbcore: registered new interface driver rtl819 2cu ash: missing ] root@Pineapple:~# [ 14.870000] usb 1-1.1: ath9k_htc: Transferred FW: ath9k_htc /htc_9271-1.4.0.fw, size: 51008 ash: missing ] root@Pineapple:~# [ 14.940000] usbserial: `0x' invalid for parameter `vendor' > [ 14.960000] sd 0:0:0:0: Attached scsi generic sg0 type 0 > [ 14.970000] usbserial: `0x' invalid for parameter `vendor' > [ 14.990000] usbserial: `0x' invalid for parameter `vendor' -ash: 0x invalid for parameter : not found [ 15.940000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) -ash: [ 16.220000] Adding 1004024k swap on /dev/sdcard/sd2. Priority:-1 exten ts:1 across:1004024k [ 19.530000] usb 1-1.3: new high-speed USB device number 6 using ehci-platform [ 20.140000] usb-storage 1-1.3:1.3: USB Mass Storage device detected [ 20.150000] scsi host3: usb-storage 1-1.3:1.3 vendor [ 14.990000] usbserial: [ 20.150000] usb-storage 1-1.3:1.4: USB Mass Storage device detected [ 20.160000] scsi host4: usb-storage 1-1.3:1.4 : [ 22.500000] scsi 3:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 [ 22.510000] scsi 3:0:0:0: Attached scsi generic sg1 type 5 [ 22.510000] scsi 4:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ : 0 ANSI: 2 not found [ 22.520000] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 22.530000] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 22.820000] sd 4:0:0:0: [sdb] 15949824 512-byte logical blocks: (8.16 GB/7.60 GiB) ash: missing ] root@Pineapple:~# [ 15.010000] usbcore: registered new interface driver cdc_ac m ash: missing ] root@Pineapple:~# [ 15.020000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters ash: missing ] root@Pineapple:~# [ 15.030000] usbcore: registered new interface driver cdc_wd m ash: missing ] root@Pineapple:~# [ 15.060000] nf_conntrack version 0.5.0 (956 buckets, 3824 m ax) -ash: syntax error: unexpected "(" root@Pineapple:~# [ 15.120000] usbcore: registered new interface driver ums-al auda ash: missing ] root@Pineapple:~# [ 15.130000] usbcore: registered new interface driver ums-cy press ash: missing ] root@Pineapple:~# [ 15.130000] ath9k_htc 1-1.1:1.0: ath9k_htc: HTC initialized with 33 credits ash: missing ] root@Pineapple:~# [ 15.140000] usbcore: registered new interface driver ums-da tafab ash: missing ] root@Pineapple:~# [ 15.150000] usbcore: registered new interface driver ums-fr eecom [ 22.860000] sdb: sdb1 [ 27.840000] device eth0 entered promiscuous mode [ 32.610000] eth0: link up (100Mbps/Full duplex) [ 32.610000] br-lan: port 1(eth0) entered forwarding state [ 32.620000] br-lan: port 1(eth0) entered forwarding state ash: missing ] root@Pineapple:~# [ 15.160000] usbcore: registered new interface driver ums-is d200 ash: missing ] root@Pineapple:~# [ 15.170000] usbcore: registered new interface driver ums-ju mpshot ash: missing ] root@Pineapple:~# [ 15.180000] usbcore: registered new interface driver ums-ka rma ash: missing ] root@Pineapple:~# [ 15.190000] usbcore: registered new interface driver ums-sd dr09 ash: missing ] root@Pineapple:~# [ 15.210000] usbcore: registered new interface driver ums-sd dr55 ash: missing ] root@Pineapple:~# [ 15.230000] usbcore: registered new interface driver ums-us bat ash: missing ] root@Pineapple:~# [ 15.250000] usbserial: `0x' invalid for parameter `vendor' > [ 15.330000] xt_time: kernel timezone is -0000 > [ 15.340000] usbcore: registered new interface driver asix > [ 15.350000] usbcore: registered new interface driver ax88179_178a > [ 15.380000] usbcore: registered new interface driver cdc_ether > [ 15.390000] ip_tables: (C) 2000-2006 Netfilter Core Team > [ 15.460000] PPP generic driver version 2.4.2 > [ 15.470000] NET: Registered protocol family 24 > [ 15.480000] usbcore: registered new interface driver qmi_wwan > [ 15.490000] usbcore: registered new interface driver rndis_host > [ 15.520000] usbcore: registered new interface driver sierra_net > [ 15.530000] usbserial: `0x' invalid for parameter `vendor' > [ 15.560000] usbserial: `0x' invalid for parameter `vendor' -ash: 0x invalid for parameter : not found -ash: vendor [ 15.560000] usbserial: : not found ash: missing ] root@Pineapple:~# [ 15.580000] usbserial: `0x' invalid for parameter `vendor' > [ 15.640000] random: nonblocking pool is initialized > [ 15.720000] ath9k_htc 1-1.1:1.0: ath9k_htc: FW Version: 1.4 > [ 15.730000] ath9k_htc 1-1.1:1.0: FW RMW support: On > [ 15.730000] ath: EEPROM regdomain: 0x0 > [ 15.730000] ath: EEPROM indicates default country code should be used > [ 15.730000] ath: doing EEPROM country->regdmn map search > [ 15.730000] ath: country maps to regdmn code: 0x3a > [ 15.730000] ath: Country alpha2 being used: US > [ 15.730000] ath: Regpair used: 0x3a > [ 15.740000] ieee80211 phy1: Atheros AR9271 Rev:1 > [ 15.870000] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompati bilities -ash: 0x invalid for parameter : not found ash: missing ] root@Pineapple:~# [ 15.890000] EXT4-fs (sda1): couldn't mount as ext2 due to f eature incompatibilities -ash: syntax error: unexpected "(" root@Pineapple:~# [ 15.940000] EXT4-fs (sda1): recovery complete -ash: syntax error: unexpected "(" root@Pineapple:~# [ 15.940000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) -ash: syntax error: unexpected "(" root@Pineapple:~# [ 16.220000] Adding 1004024k swap on /dev/sdcard/sd2. Prior ity:-1 extents:1 across:1004024k ash: missing ] root@Pineapple:~# [ 19.530000] usb 1-1.3: new high-speed USB device number 6 u sing ehci-platform ash: missing ] root@Pineapple:~# [ 20.140000] usb-storage 1-1.3:1.3: USB Mass Storage device detected ash: missing ] root@Pineapple:~# [ 20.150000] scsi host3: usb-storage 1-1.3:1.3 ash: missing ] root@Pineapple:~# [ 20.150000] usb-storage 1-1.3:1.4: USB Mass Storage device detected ash: missing ] root@Pineapple:~# [ 20.160000] scsi host4: usb-storage 1-1.3:1.4 ash: missing ] root@Pineapple:~# [ 22.500000] scsi 3:0:0:0: CD-ROM HUAWEI Mass S torage 2.31 PQ: 0 ANSI: 2 ash: missing ] root@Pineapple:~# [ 22.510000] scsi 3:0:0:0: Attached scsi generic sg1 type 5 ash: missing ] root@Pineapple:~# [ 22.510000] scsi 4:0:0:0: Direct-Access HUAWEI SD Sto rage 2.31 PQ: 0 ANSI: 2 ash: missing ] root@Pineapple:~# [ 22.520000] sd 4:0:0:0: Attached scsi generic sg2 type 0 ash: missing ] root@Pineapple:~# [ 22.530000] sd 4:0:0:0: [sdb] Attached SCSI removable disk ash: missing ] root@Pineapple:~# [ 22.820000] sd 4:0:0:0: [sdb] 15949824 512-byte logical blo cks: (8.16 GB/7.60 GiB) -ash: syntax error: unexpected "(" root@Pineapple:~# [ 22.820000] sd 4:0:0:0: [sdb] Write cache: enabled, read ca che: enabled, doesn't support DPO or FUA > [ 22.860000] sdb: sdb1 > [ 27.840000] device eth0 entered promiscuous mode > [ 32.610000] eth0: link up (100Mbps/Full duplex) > [ 32.610000] br-lan: port 1(eth0) entered forwarding state > [ 32.620000] br-lan: port 1(eth0) entered forwarding state > [ 34.620000] br-lan: port 1(eth0) entered forwarding state > [ 35.720000] device wlan0 entered promiscuous mode > [ 35.940000] br-lan: port 2(wlan0) entered forwarding state > [ 35.950000] br-lan: port 2(wlan0) entered forwarding state > [ 36.020000] device wlan0-1 entered promiscuous mode > [ 36.020000] br-lan: port 3(wlan0-1) entered forwarding state > [ 36.030000] br-lan: port 3(wlan0-1) entered forwarding state > [ 36.690000] br-lan: port 3(wlan0-1) entered disabled state > [ 37.210000] eth0: link down > [ 37.950000] br-lan: port 2(wlan0) entered forwarding state > [ 38.310000] br-lan: port 1(eth0) entered disabled state > [ 39.340000] eth0: link up (100Mbps/Full duplex) > [ 39.350000] br-lan: port 1(eth0) entered forwarding state > [ 39.360000] br-lan: port 1(eth0) entered forwarding state > [ 39.610000] br-lan: port 3(wlan0-1) entered forwarding state > [ 39.620000] br-lan: port 3(wlan0-1) entered forwarding state > [ 41.360000] br-lan: port 1(eth0) entered forwarding state > [ 41.620000] br-lan: port 3(wlan0-1) entered forwarding state Link to comment Share on other sites More sharing options...
cheeto Posted November 10, 2016 Share Posted November 10, 2016 a picture is worth a thousand words. Below you can see the tty error that I'm getting: tty error Link to comment Share on other sites More sharing options...
Foxtrot Posted November 11, 2016 Author Share Posted November 11, 2016 Hi cheeto, Unfortunately, that information isn't really useful. I'd like you to follow these steps: Navigate to the help page From the Feedback and Support section, click the button to download the debug file Wait as the debug file is generated. Once complete, save the file to your computer Attach the file to a reply in this thread. Link to comment Share on other sites More sharing options...
cheeto Posted November 11, 2016 Share Posted November 11, 2016 Thanks again Foxtrot. I hope you find this debug.log useful. let me know if i can be of any help. Cheers debug.log Link to comment Share on other sites More sharing options...
Foxtrot Posted November 12, 2016 Author Share Posted November 12, 2016 On 11/11/2016 at 1:07 AM, cheeto said: Thanks again Foxtrot. I hope you find this debug.log useful. let me know if i can be of any help. Cheers debug.log Can you execute "uci show network.wan2" and "cat /etc/modules.d/60-usb-serial" and copy and paste both outputs here Link to comment Share on other sites More sharing options...
cheeto Posted November 12, 2016 Share Posted November 12, 2016 Hey Foxtrot. Sorry man but am i supposed to ssh into the nano and type: uci show network.wan2 ?? I went to the network menu but i don't see to many options there.... Would you like to connect to my pc via Teamviewer? We can save a million hours. Perhaps if i reset the nano's firmware it might work but I think it's the real remedy for the bug. Sooner or later someone will have the same issue. Let me know whats easier 4 u. Link to comment Share on other sites More sharing options...
Foxtrot Posted November 12, 2016 Author Share Posted November 12, 2016 Hey, Sorry, but id have to decline your TeamViewer offer, unfortunately I don't have the time. Yes, you need to execute those commands over SSH. You can google a guide to SSH, it's fairly simple. Link to comment Share on other sites More sharing options...
cheeto Posted November 12, 2016 Share Posted November 12, 2016 no worries about Teamviewer, i understand. Regarding the 1st command: uci show network.wan2 I'm getting an error: root@Pineapple:~# uci show network.wan2 uci: Entry not found BUT if i do this instead: uci show I get a huge reading. I posted it on pastebin below: (i changed all my credentials since this command shows everything) http://pastebin.com/8i2Rhav0 As for the 2nd command: uci show network.wan2 i simply get this error message: root@Pineapple:~# cat/etc/modules.d/60-usb-serial -ash: cat/etc/modules.d/60-usb-serial: not found root@Pineapple:~# cat /etc/modules.d/60-usb-serial cat: can't open '/etc/modules.d/60-usb-serial': No such file or directory root@Pineapple:~# cat /etc/modules.d/60-usb-serial I hope you find this input useful, I will probably reset the firmware tonight to see if it works. Also, I tested the same dongle on the MKV and it works fine. Cheers Link to comment Share on other sites More sharing options...
Foxtrot Posted November 12, 2016 Author Share Posted November 12, 2016 The system configuration (UCI) section for wan2 missing and the /etc/modules.d/60-usb-serial file missing are signs that you have not saved settings after inputting them. That's the only explanation I have. Link to comment Share on other sites More sharing options...
cheeto Posted November 12, 2016 Share Posted November 12, 2016 i'll do a factory reset and get back to you. The odd thing is that it worked for a couple of days and died. keep u posted Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.