overwraith Posted November 5, 2015 Share Posted November 5, 2015 Ok, so I am trying to get this turtle to work on my computer, unfortunately I am working in a windows environment. This is the first time I plugged the turtle in, and I would like to reflash it. Unfortunately it appears that windows doesn't like the drivers associated with the turtle. The turtle is listed in device manager under "other devices", "USB 10/100" LAN correct? If so then I am actually getting a yellow exclamation mark next to the device. The drivers for this device are not installed. (Code 28) There is no driver selected for the device information set or element. To find a driver for this device, click Update Driver. One goes to update driver, and it doesn't accept a .bin file. Should I use the ducky flashing procedure to flash this? To complicate matters my router seems to use the default ip address that the lan turtle uses. I am a bit tired tonight. I will try to fix this mess tomorow. I just rebuilt my comptuer also, so I will probably have to get all that ducky firmware flashing software working correctly again. Some of this stuff has kinda taken back seat to other things that need doing. Quote Link to comment Share on other sites More sharing options...
Mr-Protocol Posted November 9, 2015 Share Posted November 9, 2015 The first step would be getting the drivers working. Windows update should pull it, maybe try manually search windows update with device manager. Or find a download for Realtek RTL8152 driver. Quote Link to comment Share on other sites More sharing options...
overwraith Posted November 10, 2015 Author Share Posted November 10, 2015 (edited) Yep, that fixed it. How necessary do you think it would be to reset the device to factory defaults? It did just come through the mail. I just hadn't plugged it in since I got it. ... It seems that my password is no longer working. Probably a typo or something, but I guess I will have to reset anyway... Lan turtle is a good idea, it just seems like it's a little difficult to set up correctly... Edited November 10, 2015 by overwraith Quote Link to comment Share on other sites More sharing options...
Mr-Protocol Posted November 10, 2015 Share Posted November 10, 2015 It should DHCP on the USB side. You may need to try a couple different ports or something. If the reset doesn't work, go for an RMA. Quote Link to comment Share on other sites More sharing options...
overwraith Posted November 11, 2015 Author Share Posted November 11, 2015 (edited) I actually was able to connect to the login screen though. IDK. I will try a few things, perhaps even disconnect from my local net in order to get the reset procedure working. If all else fails, and I still don't have the thing working I will consider an RMA, but not before I exaust a few other alternatives. Your password set program does check input passwords to make sure they are the same right, for example if I typeed password, and pas$word while setting up the turtle? Edited November 11, 2015 by overwraith Quote Link to comment Share on other sites More sharing options...
Mr-Protocol Posted November 11, 2015 Share Posted November 11, 2015 I'm not sure on that one, it should? lol Where is the password set program you are speaking of? Quote Link to comment Share on other sites More sharing options...
overwraith Posted November 11, 2015 Author Share Posted November 11, 2015 (edited) I was able to set a password after your first post, so the password is set, it's just whenever I type that password in it tells me it is incorrect. So what probably just happened is that the password is set, and I accidentally mistyped something, or there's a bug in the password input program. So essentially now I am ssh-ing into it and I can't get past the login screen. So what I am wondering is if the login setup prompt is programmed correctly. IDK, It is a pretty wierd coincidence that I keep typing my password in and keep getting it wrong, considering I would have had to type it in incorrectly ***twice*** on the turtle setup screen in order to get this problem. Edited November 11, 2015 by overwraith Quote Link to comment Share on other sites More sharing options...
Solution Mr-Protocol Posted November 11, 2015 Solution Share Posted November 11, 2015 Make it a simple password to see if there is an issue with special characters. Quote Link to comment Share on other sites More sharing options...
overwraith Posted November 12, 2015 Author Share Posted November 12, 2015 Ok, I can connect now. Password was probably too complex, but it was really wierd that it didn't work at all because typing twice is supposed to alert you if you didn't type it correctly. That's why people do it. It is to make sure you typed as intended. Whoever thought of giving networking devices web pages for setup was pretty smart. It's cool that you can upload via a web control. How much other web stuff can we do with the turtle? Would it be possible to host a webpage during normal configuration procedures? Quote Link to comment Share on other sites More sharing options...
Mr-Protocol Posted November 12, 2015 Share Posted November 12, 2015 I'm sure it's possible, but may need a lot of heavy lifting to do it lol. If you wouldn't mind PM'ing me your password you tried, maybe we can see what's going on. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.