Jump to content

T-mobile MF691 3g Modem help


Recommended Posts

Fixed:: Ok so later today I was installing infusions and installed the new opkg manager for the Pineapple firmware 3.0 and I discovered that kmod-usb-acm was not installed....hmmm. So I installed the ipk file to my pineapple and checked on my chatscript file and restarted and sure enough the 3g chatscript worked and my modem had a solid blue light!!! Hopefully this helps anyone else with issues similar to my experience.

Hey guys I recently bought a 3g modem (tmobile ZTE MF691) and I am having some trouble setting it up to work with my pineapple. I have been working on this day and night trying to figure out what I am doing wrong. This modem has a built in micro sd slot which I am not using.

So I went here https://github.com/WiFiPineapple/web-interface/wiki/mk4guide3gmodem and read and re-read the guide trying to find the solution. So if I understand this correctly, when I plug in my modem the initial drive is recognized as 0x19d2:0x1201 and the modem is 0x19d2:0x1203.

So if you go into the usb_modeswitch.d file there is and entry labeled as 19d2:1201. However there isn't a file named as 19d2:1203 so I created a file named 19d2:1203 and inserted the following::

# ZTE MF691 (T-Mobile Rocket 2.0)
#
# Contributor: Michael Fogel

DefaultVendor= 0x19d2
DefaultProduct=0x1201

TargetVendor= 0x19d2
TargetProduct= 0x1203

MessageContent="5553424312345678000000000000061b000000020000000000000000000000"

this is from my dmesg log

[ 1165.230000] usb 1-1: USB disconnect, device number 3
[ 1165.240000] cdc_ether 1-1:1.5: usb0: unregister 'cdc_ether' usb-ehci-platform-1, CDC Ethernet Device
[ 1173.850000] usb 1-1: new high-speed USB device number 4 using ehci-platform
[ 1174.020000] scsi2 : usb-storage 1-1:1.0
[ 1174.460000] usb 1-1: USB disconnect, device number 4
[ 1182.580000] usb 1-1: new high-speed USB device number 5 using ehci-platform
[ 1182.730000] cdc_ether 1-1:1.5: usb0: register 'cdc_ether' at usb-ehci-platform-1, CDC Ethernet Device, 02:ac:cb:fe:83:d6
[ 1182.780000] scsi3 : usb-storage 1-1:1.7
[ 1183.780000] scsi 3:0:0:0: CD-ROM T-Mobile USB SCSI CD-ROM 0001 PQ: 0 ANSI: 0
[ 1183.780000] scsi 3:0:0:0: Attached scsi generic sg0 type 5
[ 1183.810000] scsi 3:0:0:1: Direct-Access T-Mobile MMC Storage 0001 PQ: 0 ANSI: 0
[ 1183.810000] sd 3:0:0:1: Attached scsi generic sg1 type 0
[ 1183.830000] sd 3:0:0:1: [sda] Attached SCSI removable disk
[ 1278.830000] usb 1-1: USB disconnect, device number 5
[ 1278.840000] cdc_ether 1-1:1.5: usb0: unregister 'cdc_ether' usb-ehci-platform-1, CDC Ethernet Device
[ 1296.710000] usb 1-1: new high-speed USB device number 6 using ehci-platform
[ 1296.860000] scsi4 : usb-storage 1-1:1.0
[ 1297.130000] usb 1-1: USB disconnect, device number 6
[ 1305.250000] usb 1-1: new high-speed USB device number 7 using ehci-platform
[ 1305.410000] cdc_ether 1-1:1.5: usb0: register 'cdc_ether' at usb-ehci-platform-1, CDC Ethernet Device, 02:ac:cb:fe:83:d6
[ 1305.470000] scsi5 : usb-storage 1-1:1.7
[ 1306.470000] scsi 5:0:0:0: CD-ROM T-Mobile USB SCSI CD-ROM 0001 PQ: 0 ANSI: 0
[ 1306.470000] scsi 5:0:0:0: Attached scsi generic sg0 type 5
[ 1306.490000] scsi 5:0:0:1: Direct-Access T-Mobile MMC Storage 0001 PQ: 0 ANSI: 0
[ 1306.490000] sd 5:0:0:1: Attached scsi generic sg1 type 0
[ 1306.510000] sd 5:0:0:1: [sda] Attached SCSI removable disk
[ 1386.470000] usb 1-1: USB disconnect, device number 7
[ 1386.470000] cdc_ether 1-1:1.5: usb0: unregister 'cdc_ether' usb-ehci-platform-1, CDC Ethernet Device
[ 1473.160000] usb 1-1: new high-speed USB device number 8 using ehci-platform
[ 1473.330000] scsi6 : usb-storage 1-1:1.0
[ 1473.640000] usb 1-1: USB disconnect, device number 8
[ 1481.760000] usb 1-1: new high-speed USB device number 9 using ehci-platform
[ 1481.920000] cdc_ether 1-1:1.5: usb0: register 'cdc_ether' at usb-ehci-platform-1, CDC Ethernet Device, 02:ac:cb:fe:83:d6
[ 1481.930000] scsi7 : usb-storage 1-1:1.7
[ 1482.930000] scsi 7:0:0:0: CD-ROM T-Mobile USB SCSI CD-ROM 0001 PQ: 0 ANSI: 0
[ 1482.940000] scsi 7:0:0:0: Attached scsi generic sg0 type 5
[ 1482.950000] scsi 7:0:0:1: Direct-Access T-Mobile MMC Storage 0001 PQ: 0 ANSI: 0
[ 1482.950000] sd 7:0:0:1: Attached scsi generic sg1 type 0
[ 1482.960000] sd 7:0:0:1: [sda] Attached SCSI removable disk
[ 3039.750000] usb 1-1: USB disconnect, device number 9
[ 3039.750000] cdc_ether 1-1:1.5: usb0: unregister 'cdc_ether' usb-ehci-platform-1, CDC Ethernet Device
[ 3047.360000] usb 1-1: new high-speed USB device number 10 using ehci-platform
[ 3047.520000] scsi8 : usb-storage 1-1:1.0

I am unable to get the modem to switch from cdrom to the modem feature. I have also tried adding the PID/VID to /etc/modules.d/60-usb-serial. This has been driving me crazy, if anyone is willing to help please let me know, I could really use another set of eyes lol

It seems that the modem is switching from 19d2:1201 to 19d2:1203 but then it tries to switch back again.

00:00:46 Pineapple daemon.notice netifd: Interface 'lan' is now up
00:00:45 Pineapple syslog.notice usb_modeswitch: switching device 19d2:1201 on 001/002
00:00:45 Pineapple kern.info kernel: [ 45.180000] usb 1-1: USB disconnect, device number 2
00:00:44 Pineapple user.notice usb-modeswitch: 1-1:1.0: Selecting /etc/usb_modeswitch.d/19d2:1201 for mode switching
00:00:44 Pineapple user.notice usb-modeswitch: 1-1:1.0: Manufacturer=T-Mobile Product=WebConnect_Rocket_2.0 Serial=
00:00:43 Pineapple user.notice usb-modeswitch: 1-0:1.0: Manufacturer=Linux_3.3.8_ehci_hcd Product=Generic_Platform_EHCI_Controller Serial=ehci-platform
00:00:40 Pineapple kern.notice kernel: [ 38.760000] sd 0:0:0:1: Attached scsi generic sg1 type 0
00:00:40 Pineapple kern.notice kernel: [ 38.760000] scsi 0:0:0:0: Attached scsi generic sg0 type 5
00:00:40 Pineapple kern.notice kernel: [ 13.610000] sd 0:0:0:1: [sda] Attached SCSI removable disk
00:00:40 Pineapple kern.notice kernel: [ 13.600000] scsi 0:0:0:1: Direct-Access T-Mobile MMC Storage 0001 PQ: 0 ANSI: 0
00:00:40 Pineapple kern.notice kernel: [ 13.590000] scsi 0:0:0:0: CD-ROM T-Mobile USB SCSI CD-ROM 0001 PQ: 0 ANSI: 0
00:00:40 Pineapple kern.notice kernel: [ 10.920000] SCSI subsystem initialized
00:00:40 Pineapple kern.info kernel: [ 38.630000] usbcore: registered new interface driver rndis_host
00:00:40 Pineapple kern.info kernel: [ 38.400000] usbcore: registered new interface driver cdc_ether
00:00:40 Pineapple kern.info kernel: [ 38.210000] usbcore: registered new interface driver ath9k_htc
00:00:40 Pineapple kern.info kernel: [ 37.710000] xt_time: kernel timezone is -0000
00:00:40 Pineapple kern.info kernel: [ 37.020000] nf_conntrack version 0.5.0 (458 buckets, 1832 max)
00:00:40 Pineapple kern.info kernel: [ 36.880000] NET: Registered protocol family 24
00:00:40 Pineapple kern.info kernel: [ 36.650000] ip_tables: © 2000-2006 Netfilter Core Team
00:00:40 Pineapple kern.info kernel: [ 36.400000] tun: © 1999-2004 Max Krasnyansky
00:00:40 Pineapple kern.info kernel: [ 36.390000] tun: Universal TUN/TAP device driver, 1.6
00:00:40 Pineapple kern.info kernel: [ 36.250000] PPP generic driver version 2.4.2
00:00:40 Pineapple kern.info kernel: [ 35.890000] RPC: Registered tcp NFSv4.1 backchannel transport module.
00:00:40 Pineapple kern.info kernel: [ 35.880000] RPC: Registered udp transport module.
00:00:40 Pineapple kern.info kernel: [ 35.880000] RPC: Registered tcp transport module.
00:00:40 Pineapple kern.info kernel: [ 35.880000] RPC: Registered named UNIX socket transport module.
00:00:40 Pineapple kern.info kernel: [ 35.630000] Button Hotplug driver version 0.4.1
00:00:40 Pineapple kern.info kernel: [ 35.620000] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
00:00:40 Pineapple kern.info kernel: [ 35.610000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
00:00:40 Pineapple kern.info kernel: [ 35.600000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
00:00:40 Pineapple kern.info kernel: [ 35.600000] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
00:00:40 Pineapple kern.info kernel: [ 35.590000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
00:00:40 Pineapple kern.info kernel: [ 35.580000] cfg80211: Regulatory domain changed to country: GB
00:00:40 Pineapple kern.info kernel: [ 35.580000] cfg80211: Calling CRDA for country: GB
00:00:40 Pineapple kern.info kernel: [ 35.500000] usbcore: registered new interface driver rt2800usb
00:00:40 Pineapple kern.info kernel: [ 35.470000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
00:00:40 Pineapple kern.info kernel: [ 35.420000] usbcore: registered new interface driver rtl8187
00:00:40 Pineapple kern.info kernel: [ 35.280000] usbcore: registered new interface driver rt73usb
00:00:40 Pineapple kern.info kernel: [ 33.820000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
00:00:40 Pineapple kern.info kernel: [ 33.820000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
00:00:40 Pineapple kern.info kernel: [ 33.810000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
00:00:40 Pineapple kern.info kernel: [ 33.800000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
00:00:40 Pineapple kern.info kernel: [ 33.790000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
00:00:40 Pineapple kern.info kernel: [ 33.790000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
00:00:40 Pineapple kern.info kernel: [ 33.780000] cfg80211: World regulatory domain updated:
00:00:40 Pineapple kern.info kernel: [ 33.780000] cfg80211: Calling CRDA to update world regulatory domain
00:00:40 Pineapple kern.info kernel: [ 33.660000] compat.git: wireless-testing.git
00:00:40 Pineapple kern.info kernel: [ 33.660000] Backport based on wireless-testing.git master-2013-02-22
00:00:40 Pineapple kern.info kernel: [ 33.650000] Compat-drivers backport release: compat-drivers-2013-01-21-1
00:00:40 Pineapple kern.info kernel: [ 12.590000] scsi0 : usb-storage 1-1:1.0
00:00:40 Pineapple kern.info kernel: [ 12.440000] usb 1-1: new high-speed USB device number 2 using ehci-platform
00:00:40 Pineapple kern.info kernel: [ 12.290000] USB Mass Storage support registered.
00:00:40 Pineapple kern.info kernel: [ 12.280000] usbcore: registered new interface driver usb-storage
00:00:40 Pineapple kern.info kernel: [ 12.280000] Initializing USB Mass Storage driver...
00:00:40 Pineapple kern.info kernel: [ 12.160000] uhci_hcd: USB Universal Host Controller Interface driver
00:00:40 Pineapple kern.info kernel: [ 12.040000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
00:00:40 Pineapple kern.info kernel: [ 11.910000] hub 1-0:1.0: USB hub found
00:00:40 Pineapple kern.info kernel: [ 11.910000] hub 1-0:1.0: 1 port detected
00:00:40 Pineapple kern.info kernel: [ 11.910000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
00:00:40 Pineapple kern.info kernel: [ 11.890000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
00:00:40 Pineapple kern.info kernel: [ 11.850000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
00:00:40 Pineapple kern.info kernel: [ 11.840000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
00:00:40 Pineapple kern.info kernel: [ 11.840000] ehci-platform ehci-platform: Generic Platform EHCI Controller
00:00:40 Pineapple kern.info kernel: [ 11.240000] usbcore: registered new interface driver hub
00:00:40 Pineapple kern.info kernel: [ 11.240000] usbcore: registered new device driver usb
00:00:40 Pineapple kern.info kernel: [ 11.230000] usbcore: registered new interface driver usbfs
00:00:40 Pineapple kern.err kernel: [ 38.520000] Error: Driver 'gpio-keys-polled' is already registered, aborting...
00:00:40 Pineapple kern.debug kernel: [ 35.470000] Registered led device: ath9k-phy0
00:00:40 Pineapple kern.debug kernel: [ 35.460000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
00:00:40 Pineapple kern.debug kernel: [ 35.460000] ath: doing EEPROM country->regdmn map search
00:00:40 Pineapple kern.debug kernel: [ 35.460000] ath: country maps to regdmn code: 0x37
00:00:40 Pineapple kern.debug kernel: [ 35.460000] ath: Regpair used: 0x37
00:00:40 Pineapple kern.debug kernel: [ 35.460000] ath: EEPROM regdomain: 0x833a
00:00:40 Pineapple kern.debug kernel: [ 35.460000] ath: EEPROM indicates we should expect a country code
00:00:40 Pineapple kern.debug kernel: [ 35.460000] ath: Country alpha2 being used: GB
22:16:50 Pineapple user.notice usb-modeswitch: 1-1:1.3: Switching seemingly failed
22:16:49 Pineapple user.notice usb-modeswitch: 1-1:1.3: Selecting /etc/usb_modeswitch.d/19d2:1203 for mode switching
22:16:49 Pineapple user.notice usb-modeswitch: 1-1:1.3: Manufacturer=T-Mobile Product=WebConnect_Rocket_2.0 Serial=
22:16:48 Pineapple user.notice usb-modeswitch: 1-1:1.2: Switching seemingly failed
22:16:47 Pineapple user.notice usb-modeswitch: 1-1:1.2: Switching seemingly failed
22:16:46 Pineapple user.notice usb-modeswitch: 1-1:1.2: Switching seemingly failed
22:16:45 Pineapple user.notice usb-modeswitch: 1-1:1.2: Switching seemingly failed
22:16:44 Pineapple user.notice usb-modeswitch: 1-1:1.2: Switching seemingly failed
22:16:43 Pineapple user.notice usb-modeswitch: 1-1:1.2: Switching seemingly failed
22:16:42 Pineapple user.notice usb-modeswitch: 1-1:1.2: Switching seemingly failed
22:16:42 Pineapple user.notice usb-modeswitch: 1-1:1.2: Selecting /etc/usb_modeswitch.d/19d2:1203 for mode switching
22:16:42 Pineapple user.notice usb-modeswitch: 1-1:1.2: Manufacturer=T-Mobile Product=WebConnect_Rocket_2.0 Serial=
22:16:41 Pineapple user.notice usb-modeswitch: 1-1:1.1: Switching seemingly failed
22:16:40 Pineapple user.notice usb-modeswitch: 1-1:1.1: Switching seemingly failed
22:16:39 Pineapple user.notice usb-modeswitch: 1-1:1.1: Switching seemingly failed
22:16:38 Pineapple user.notice usb-modeswitch: 1-1:1.1: Switching seemingly failed
22:16:37 Pineapple user.notice usb-modeswitch: 1-1:1.1: Switching seemingly failed
22:16:36 Pineapple user.notice usb-modeswitch: 1-1:1.1: Switching seemingly failed
22:16:35 Pineapple user.notice usb-modeswitch: 1-1:1.1: Switching seemingly failed
22:16:34 Pineapple user.notice usb-modeswitch: 1-1:1.1: Selecting /etc/usb_modeswitch.d/19d2:1203 for mode switching
22:16:34 Pineapple user.notice usb-modeswitch: 1-1:1.1: Manufacturer=T-Mobile Product=WebConnect_Rocket_2.0 Serial=
22:16:33 Pineapple user.notice usb-modeswitch: 1-1:1.0: Switching seemingly failed
22:16:32 Pineapple user.notice usb-modeswitch: 1-1:1.0: Switching seemingly failed
22:16:31 Pineapple user.notice usb-modeswitch: 1-1:1.0: Switching seemingly failed
22:16:30 Pineapple user.notice usb-modeswitch: 1-1:1.0: Switching seemingly failed
22:16:29 Pineapple user.notice usb-modeswitch: 1-1:1.0: Switching seemingly failed
22:16:28 Pineapple user.notice usb-modeswitch: 1-1:1.0: Switching seemingly failed
22:16:27 Pineapple user.notice usb-modeswitch: 1-1:1.0: Switching seemingly failed
22:16:27 Pineapple user.notice usb-modeswitch: 1-1:1.0: Selecting /etc/usb_modeswitch.d/19d2:1203 for mode switching
22:16:27 Pineapple user.notice usb-modeswitch: 1-1:1.0: Manufacturer=T-Mobile Product=WebConnect_Rocket_2.0 Serial=

Mobile Broadband Config

Mobile Configuration

Mobile Broadband Configuration - Redial
Interface Name:ppp0
Protocol:3g
Service:umts
Device:/dev/ttyUSB0
APN:epc.tmobile.com
Username:internet
Password:internet
Default Route:1
ppp redial:1
Peer DNS:1
DNS:
Keepalive:1
pppd options:

Thanks.

When I issue the ls /dev command it lists: sda, sg0, sg1. I cant get it to switch to /dev/ttyUSB*

I have also tried this command: sdparm command=eject /dev/sg0

Update:(8/20/13)

So I realized that the modem is switching at boot from 19d2:1201 to 19d2:1203 so I removed the 19d2:1203 file from usb_modeswitch and I am now getting this in my logs.

Syslog Output:

00:01:06 Pineapple user.info sysinit: setting up led WLAN
00:01:06 Pineapple user.info sysinit: setting up led WAN
00:01:06 Pineapple user.info sysinit: setting up led USB
00:01:06 Pineapple user.info sysinit: setting up led LAN
00:01:06 Pineapple user.info sysinit: Selected interface 'wlan0'
00:01:06 Pineapple user.info sysinit: OK
00:01:05 Pineapple daemon.info dnsmasq[1300]: using nameserver 8.8.8.8#53
00:01:05 Pineapple daemon.info dnsmasq[1300]: using nameserver 207.16.27.42#53#53
00:01:05 Pineapple daemon.info dnsmasq[1300]: using nameserver 207.16.27.42#53
00:01:05 Pineapple daemon.info dnsmasq[1300]: using local addresses only for domain lan
00:01:05 Pineapple daemon.info dnsmasq[1300]: using local addresses only for domain lan
00:01:05 Pineapple daemon.info dnsmasq[1300]: started, version 2.62 cachesize 150
00:01:05 Pineapple daemon.info dnsmasq[1300]: reading /tmp/resolv.conf.auto
00:01:05 Pineapple daemon.info dnsmasq[1300]: read /etc/hosts - 1 addresses
00:01:05 Pineapple daemon.info dnsmasq[1300]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack
00:01:05 Pineapple daemon.info dnsmasq-dhcp[1300]: read /etc/ethers - 0 addresses
00:01:05 Pineapple daemon.info dnsmasq-dhcp[1300]: DHCP, IP range 172.16.42.100 -- 172.16.42.249, lease time 12h
00:01:05 Pineapple authpriv.notice dropbear[1257]: Password auth succeeded for 'root' from 192.168.0.13:57395
00:01:02 Pineapple user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
00:01:02 Pineapple user.notice dnsmasq: Allowing 127.0.0.0/8 responses
00:01:01 Pineapple cron.info crond[1184]: crond: USER root pid 1258 cmd python /usb/infusions/smser/content/smser.py --useconfig /usb/infusions/smser/content/smser.conf --logpath /usb/infusions/smser/content/smser.log
00:01:01 Pineapple authpriv.info dropbear[1257]: Child connection from 192.168.0.13:57395
00:00:57 Pineapple authpriv.info dropbear[1217]: Running in background
00:00:55 Pineapple user.notice ifup: Enabling Router Solicitations on usb (usb0)
00:00:55 Pineapple cron.info crond[1184]: crond: crond (busybox 1.19.4) started, log level 5
00:00:54 Pineapple kern.notice kernel: [ 54.080000] sd 1:0:0:1: [sda] Attached SCSI removable disk
00:00:54 Pineapple kern.notice kernel: [ 54.070000] sd 1:0:0:1: Attached scsi generic sg1 type 0
00:00:54 Pineapple kern.notice kernel: [ 54.070000] scsi 1:0:0:1: Direct-Access T-Mobile MMC Storage 0001 PQ: 0 ANSI: 0
00:00:54 Pineapple kern.notice kernel: [ 54.050000] scsi 1:0:0:0: CD-ROM T-Mobile USB SCSI CD-ROM 0001 PQ: 0 ANSI: 0
00:00:54 Pineapple kern.notice kernel: [ 54.050000] scsi 1:0:0:0: Attached scsi generic sg0 type 5
00:00:53 Pineapple kern.info kernel: [ 53.050000] scsi1 : usb-storage 1-1:1.7
00:00:53 Pineapple kern.info kernel: [ 53.020000] cdc_ether 1-1:1.5: usb0: register 'cdc_ether' at usb-ehci-platform-1, CDC Ethernet Device, 02:ac:cb:fe:83:d6
00:00:53 Pineapple daemon.notice netifd: Interface 'usb' is now up
00:00:52 Pineapple user.notice ifup: Allowing Router Advertisements on wan (eth1)
00:00:52 Pineapple kern.info kernel: [ 52.860000] usb 1-1: new high-speed USB device number 3 using ehci-platform
00:00:52 Pineapple kern.info kernel: [ 52.660000] br-lan: port 2(wlan0) entered forwarding state
00:00:51 Pineapple daemon.notice netifd: Interface 'wan' is now up
00:00:50 Pineapple kern.info kernel: [ 50.660000] br-lan: port 2(wlan0) entered forwarding state
00:00:50 Pineapple kern.info kernel: [ 50.660000] br-lan: port 2(wlan0) entered forwarding state
00:00:50 Pineapple kern.info kernel: [ 50.610000] device wlan0 entered promiscuous mode
00:00:50 Pineapple daemon.notice netifd: wan (857): Sending select for 192.168.0.9...
00:00:50 Pineapple daemon.notice netifd: wan (857): Lease of 192.168.0.9 obtained, lease time 3600
00:00:49 Pineapple kern.info kernel: [ 49.620000] eth1: link up (100Mbps/Full duplex)
00:00:49 Pineapple daemon.notice netifd: wan (857): Sending discover...
00:00:48 Pineapple user.notice ifup: Enabling Router Solicitations on loopback (lo)
00:00:47 Pineapple user.notice ifup: Enabling Router Solicitations on lan (br-lan)
00:00:46 Pineapple kern.info kernel: [ 46.130000] device eth0 entered promiscuous mode
00:00:46 Pineapple daemon.notice netifd: wan (857): udhcpc (v1.19.4) started
00:00:46 Pineapple daemon.notice netifd: wan (857): Sending discover...
00:00:46 Pineapple daemon.notice netifd: Interface 'wan2' is now down
00:00:46 Pineapple daemon.notice netifd: Interface 'loopback' is now up
00:00:46 Pineapple daemon.notice netifd: Interface 'lan' is now up
00:00:44 Pineapple user.notice usb-modeswitch: 1-1:1.0: Selecting /etc/usb_modeswitch.d/19d2:1201 for mode switching
00:00:44 Pineapple syslog.notice usb_modeswitch: switching device 19d2:1201 on 001/002
00:00:44 Pineapple kern.info kernel: [ 44.760000] usb 1-1: USB disconnect, device number 2
00:00:43 Pineapple user.notice usb-modeswitch: 1-1:1.0: Manufacturer=T-Mobile Product=WebConnect_Rocket_2.0 Serial=
00:00:43 Pineapple user.notice usb-modeswitch: 1-0:1.0: Manufacturer=Linux_3.3.8_ehci_hcd Product=Generic_Platform_EHCI_Controller Serial=ehci-platform
00:00:40 Pineapple kern.notice kernel: [ 38.750000] sd 0:0:0:1: Attached scsi generic sg1 type 0
00:00:40 Pineapple kern.notice kernel: [ 38.750000] scsi 0:0:0:0: Attached scsi generic sg0 type 5
00:00:40 Pineapple kern.info kernel: [ 38.630000] usbcore: registered new interface driver rndis_host
00:00:40 Pineapple kern.info kernel: [ 38.400000] usbcore: registered new interface driver cdc_ether
00:00:40 Pineapple kern.info kernel: [ 38.200000] usbcore: registered new interface driver ath9k_htc
00:00:40 Pineapple kern.info kernel: [ 37.710000] xt_time: kernel timezone is -0000
00:00:40 Pineapple kern.info kernel: [ 37.010000] nf_conntrack version 0.5.0 (458 buckets, 1832 max)
00:00:40 Pineapple kern.info kernel: [ 36.870000] NET: Registered protocol family 24
00:00:40 Pineapple kern.info kernel: [ 36.640000] ip_tables: © 2000-2006 Netfilter Core Team
00:00:40 Pineapple kern.info kernel: [ 36.390000] tun: © 1999-2004 Max Krasnyansky
00:00:40 Pineapple kern.info kernel: [ 36.380000] tun: Universal TUN/TAP device driver, 1.6
00:00:40 Pineapple kern.info kernel: [ 36.240000] PPP generic driver version 2.4.2
00:00:40 Pineapple kern.info kernel: [ 35.890000] RPC: Registered tcp NFSv4.1 backchannel transport module.
00:00:40 Pineapple kern.info kernel: [ 35.880000] RPC: Registered udp transport module.
00:00:40 Pineapple kern.info kernel: [ 35.880000] RPC: Registered tcp transport module.
00:00:40 Pineapple kern.info kernel: [ 35.870000] RPC: Registered named UNIX socket transport module.
00:00:40 Pineapple kern.info kernel: [ 35.620000] Button Hotplug driver version 0.4.1
00:00:40 Pineapple kern.info kernel: [ 35.600000] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
00:00:40 Pineapple kern.info kernel: [ 35.600000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
00:00:40 Pineapple kern.info kernel: [ 35.590000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
00:00:40 Pineapple kern.info kernel: [ 35.580000] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
00:00:40 Pineapple kern.info kernel: [ 35.570000] cfg80211: Regulatory domain changed to country: GB
00:00:40 Pineapple kern.info kernel: [ 35.570000] cfg80211: Calling CRDA for country: GB
00:00:40 Pineapple kern.info kernel: [ 35.570000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
00:00:40 Pineapple kern.info kernel: [ 35.490000] usbcore: registered new interface driver rt2800usb
00:00:40 Pineapple kern.info kernel: [ 35.460000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
00:00:40 Pineapple kern.err kernel: [ 38.520000] Error: Driver 'gpio-keys-polled' is already registered, aborting...
00:00:40 Pineapple kern.debug kernel: [ 35.460000] Registered led device: ath9k-phy0
19:18:01 Pineapple cron.info crond[1184]: crond: USER root pid 3025 cmd python /usb/infusions/smser/content/smser.py --useconfig /usb/infusions/smser/content/smser.conf --logpath /usb/infusions/smser/content/smser.log
19:17:20 Pineapple user.notice usb-modeswitch: 1-1:1.9: Manufacturer=T-Mobile Product=WebConnect_Rocket_2.0 Serial=

19:17:20 Pineapple user.notice usb-modeswitch: 1-1:1.8: Manufacturer=T-Mobile Product=WebConnect_Rocket_2.0 Serial=
19:17:20 Pineapple user.notice usb-modeswitch: 1-1:1.7: Manufacturer=T-Mobile Product=WebConnect_Rocket_2.0 Serial=
19:17:20 Pineapple user.notice usb-modeswitch: 1-1:1.6: Manufacturer=T-Mobile Product=WebConnect_Rocket_2.0 Serial=
19:17:19 Pineapple user.notice usb-modeswitch: 1-1:1.4: Manufacturer=T-Mobile Product=WebConnect_Rocket_2.0 Serial
19:17:19 Pineapple user.notice usb-modeswitch: 1-1:1.3: Manufacturer=T-Mobile Product=WebConnect_Rocket_2.0 Serial=
19:17:19 Pineapple user.notice usb-modeswitch: 1-1:1.2: Manufacturer=T-Mobile Product=WebConnect_Rocket_2.0 Serial=
19:17:01 Pineapple cron.info crond[1184]: crond: USER root pid 2636 cmd python /usb/infusions/smser/content/smser.py --useconfig /usb/infusions/smser/content/smser.conf --logpath /usb/infusions/smser/content/smser.log
19:16:55 Pineapple daemon.info dnsmasq[1300]: using nameserver 8.8.8.8#53
19:16:55 Pineapple daemon.info dnsmasq[1300]: using nameserver 209.18.47.62#53
19:16:55 Pineapple daemon.info dnsmasq[1300]: using nameserver 209.18.47.61#53
19:16:55 Pineapple daemon.info dnsmasq[1300]: using local addresses only for domain lan
19:16:55 Pineapple daemon.info dnsmasq[1300]: reading /tmp/resolv.conf.auto
19:16:54 Pineapple user.notice ifup: Enabling Router Solicitations on usb (usb0)
19:16:54 Pineapple kern.notice kernel: [ 275.320000] sd 3:0:0:1: [sda] Attached SCSI removable disk
19:16:54 Pineapple kern.notice kernel: [ 275.310000] sd 3:0:0:1: Attached scsi generic sg1 type 0
19:16:54 Pineapple kern.notice kernel: [ 275.310000] scsi 3:0:0:1: Direct-Access T-Mobile MMC Storage 0001 PQ: 0 ANSI: 0
19:16:54 Pineapple kern.notice kernel: [ 275.290000] scsi 3:0:0:0: CD-ROM T-Mobile USB SCSI CD-ROM 0001 PQ: 0 ANSI: 0
19:16:54 Pineapple kern.notice kernel: [ 275.290000] scsi 3:0:0:0: Attached scsi generic sg0 type 5
19:16:53 Pineapple kern.info kernel: [ 274.290000] scsi3 : usb-storage 1-1:1.7
19:16:53 Pineapple kern.info kernel: [ 274.260000] cdc_ether 1-1:1.5: usb0: register 'cdc_ether' at usb-ehci-platform-1, CDC Ethernet Device, 02:ac:cb:fe:83:d6
19:16:53 Pineapple kern.info kernel: [ 274.110000] usb 1-1: new high-speed USB device number 5 using ehci-platform
19:16:53 Pineapple daemon.notice netifd: Interface 'usb' is now up
19:16:44 Pineapple user.notice usb-modeswitch: 1-1:1.0: Selecting /etc/usb_modeswitch.d/19d2:1201 for mode switching
19:16:44 Pineapple user.notice usb-modeswitch: 1-1:1.0: Manufacturer=T-Mobile Product=WebConnect_Rocket_2.0 Serial=
19:16:44 Pineapple syslog.notice usb_modeswitch: switching device 19d2:1201 on 001/004
19:16:44 Pineapple kern.info kernel: [ 265.950000] usb 1-1: USB disconnect, device number 4
19:16:44 Pineapple kern.info kernel: [ 265.700000] scsi2 : usb-storage 1-1:1.0
19:16:44 Pineapple kern.info kernel: [ 265.540000] usb 1-1: new high-speed USB device number 4 using ehci-platform
19:16:38 Pineapple daemon.info dnsmasq[1300]: using nameserver 8.8.8.8#53
19:16:38 Pineapple daemon.info dnsmasq[1300]: using nameserver 207.16.27.42#53
19:16:38 Pineapple daemon.info dnsmasq[1300]: using nameserver 207.16.27.42#53
19:16:38 Pineapple daemon.info dnsmasq[1300]: using local addresses only for domain lan
19:16:38 Pineapple daemon.info dnsmasq[1300]: reading /tmp/resolv.conf.auto
19:16:37 Pineapple kern.info kernel: [ 258.710000] usb 1-1: USB disconnect, device number 3
19:16:37 Pineapple kern.info kernel: [ 258.710000] cdc_ether 1-1:1.5: usb0: unregister 'cdc_ether' usb-ehci-platform-1, CDC Ethernet Device
19:16:37 Pineapple daemon.notice netifd: Interface 'usb' is now down
19:16:20 Pineapple authpriv.notice dropbear[2363]: Password auth succeeded for 'root' from 192.168.0.13:57497
19:16:08 Pineapple authpriv.info dropbear[2363]: Child connection from 192.168.0.13:57497
19:16:01 Pineapple cron.info crond[1184]: crond: USER root pid 2345 cmd python /usb/infusions/smser/content/smser.py --useconfig /usb/infusions/smser/content/smser.conf --logpath /usb/infusions/smser/content/smser.log
19:15:01 Pineapple cron.info crond[1184]: crond: USER root pid 2152 cmd python /usb/infusions/smser/content/smser.py --useconfig /usb/infusions/smser/content/smser.conf --logpath /usb/infusions/smser/content/smser.log
19:14:20 Pineapple cron.err crond[1184]: time disparity of 22950433 minutes detected
19:13:46 Pineapple user.notice usb-modeswitch: 1-1:1.9: Manufacturer=T-Mobile Product=WebConnect_Rocket_2.0 Serial=
19:13:45 Pineapple user.notice usb-modeswitch: 1-1:1.8: Manufacturer=T-Mobile Product=WebConnect_Rocket_2.0 Serial=
19:13:45 Pineapple user.notice usb-modeswitch: 1-1:1.7: Manufacturer=T-Mobile Product=WebConnect_Rocket_2.0 Serial=
19:13:45 Pineapple user.notice usb-modeswitch: 1-1:1.6: Manufacturer=T-Mobile Product=WebConnect_Rocket_2.0 Serial=
19:13:45 Pineapple user.notice usb-modeswitch: 1-1:1.5: Manufacturer=T-Mobile Product=WebConnect_Rocket_2.0 Serial=
19:13:45 Pineapple user.notice usb-modeswitch: 1-1:1.4: Manufacturer=T-Mobile Product=WebConnect_Rocket_2.0 Serial=
19:13:44 Pineapple user.notice usb-modeswitch: 1-1:1.3: Manufacturer=T-Mobile Product=WebConnect_Rocket_2.0 Serial=
19:13:44 Pineapple user.notice usb-modeswitch: 1-1:1.2: Manufacturer=T-Mobile Product=WebConnect_Rocket_2.0 Serial=
19:13:44 Pineapple user.notice usb-modeswitch: 1-1:1.1: Manufacturer=T-Mobile Product=WebConnect_Rocket_2.0 Serial=
19:13:44 Pineapple user.notice usb-modeswitch: 1-1:1.0: Manufacturer=T-Mobile Product=WebConnect_Rocket_2.0 Serial=

I have tried using powered usb hubs and the 12v ac adapter for the pineapple.

2nd update.

so I have made some more progress, I was browsing through the ui and accidently click on the reset option and reset all the settings on my pineapple. Well in doing so after the reboot I issued ls /dev/tty* and I was able to see the ttyUSB0 & ttyUSB1 listed. So thats as far as I've got. I am having problems with the 3g.chat script failing. I tried changing ATD*99***1# to ATD*99# as well as just *99# with either option being successful.

New logs. I am able to see /dev/ttyUSB0 and /dev/ttyUSB1 but the connect script is failing?

02:42:09 Pineapple local2.info chat[3333]: expect (OK)
02:42:08 Pineapple local2.info chat[3333]: timeout set to 10 seconds
02:42:08 Pineapple local2.info chat[3333]: send (AT&F^M)
02:42:08 Pineapple local2.info chat[3333]: report (CONNECT)
02:42:08 Pineapple local2.info chat[3333]: abort on (NO CARRIER)
02:42:08 Pineapple local2.info chat[3333]: abort on (ERROR)
02:42:08 Pineapple local2.info chat[3333]: abort on (BUSY)
02:42:07 Pineapple daemon.notice pppd[3329]: pppd 2.4.5 started by root, uid 0
02:42:06 Pineapple daemon.info dnsmasq[1279]: using nameserver 8.8.8.8#53
02:42:06 Pineapple daemon.info dnsmasq[1279]: using nameserver 209.18.47.62#53
02:42:06 Pineapple daemon.info dnsmasq[1279]: using nameserver 209.18.47.61#53
02:42:06 Pineapple daemon.info dnsmasq[1279]: using local addresses only for domain lan
02:42:06 Pineapple daemon.info dnsmasq[1279]: reading /tmp/resolv.conf.auto
02:42:05 Pineapple daemon.notice netifd: Interface 'wan2' is now down
02:42:05 Pineapple daemon.info pppd[3243]: Exit.
02:42:04 Pineapple local2.info chat[3252]: alarm
02:42:04 Pineapple local2.info chat[3252]: Failed
02:42:04 Pineapple daemon.err pppd[3243]: Connect script failed
02:41:54 Pineapple local2.info chat[3252]: timeout set to 10 seconds
02:41:54 Pineapple local2.info chat[3252]: send (AT&F^M)
02:41:54 Pineapple local2.info chat[3252]: report (CONNECT)
02:41:54 Pineapple local2.info chat[3252]: expect (OK)
02:41:54 Pineapple local2.info chat[3252]: abort on (NO CARRIER)
02:41:54 Pineapple local2.info chat[3252]: abort on (ERROR)
02:41:54 Pineapple local2.info chat[3252]: abort on (BUSY)
02:41:53 Pineapple daemon.notice pppd[3243]: pppd 2.4.5 started by root, uid 0
02:41:53 Pineapple daemon.info dnsmasq[1279]: using nameserver 8.8.8.8#53
02:41:53 Pineapple daemon.info dnsmasq[1279]: using nameserver 209.18.47.62#53
02:41:53 Pineapple daemon.info dnsmasq[1279]: using nameserver 209.18.47.61#53
02:41:53 Pineapple daemon.info dnsmasq[1279]: using local addresses only for domain lan
02:41:53 Pineapple daemon.info dnsmasq[1279]: reading /tmp/resolv.conf.auto
02:41:51 Pineapple daemon.notice netifd: Interface 'wan2' is now down
02:41:51 Pineapple daemon.info pppd[3162]: Exit.
02:41:50 Pineapple local2.info chat[3166]: alarm

Edited by deathdealerxx
Link to comment
Share on other sites

  • 1 month later...

Looks like the driver and hardware is fine. Now you need to authenticate to the mobile network. For T-Mobile, the dial-in number is *99#, with no name or password.

Its been solved for weeks now. I had to install the kmod-usb-acm module in order for it to switch to acm0 to enable 3g. But thanks

Link to comment
Share on other sites

  • 5 months later...
Posted (edited) · Hidden by Sebkinne, March 13, 2014 - He ain't even using a MKIV?
Hidden by Sebkinne, March 13, 2014 - He ain't even using a MKIV?

Hello friends,

I have 3 modems ZTE MF691

I am using the software dc_ZTE_Icera_unlocker from dc-unlocker.com

I recent created my account to add credit

In my mind I added total 21 credits (7 credits for unlock).

Perform the unlock modem ZTE MF691 my three, and the result was successful.

Only works my first modem 3G coverage and detects and connects perfectly!,
the other two modems do not detect any 3G coverage and detects only GPRS not connected.

All equipment is new in sealed box.

Help please that solution exists for this problem.

This is the log of my two modems that do not work

++++++++++++++++++++++++MODEM 2 and 3++++++++++++++++++++++++++++++++++++++++++

Searching for ZTE modem... OK
Reading modem info... OK
Reading modem port mode... OK
Reading modem CDROM status... OK
Reading modem IMEI... OK
Reading modem model name... OK
Reading modem firmware version... OK
Reading modem dashboard version... failed!
Reading modem functionality status... OK
Reading SIM status... Not Inserted
Reading Lock status... OK

Readed modem info:

Modem COM port : COM3
Mode : 0
CGMM name : MF691
IMEI : 352071040201753
Firmware : Harrier_R1.2.5VCL328629
Full CGMR responce :
Modem mode
Harrier_R1.2.5VCL328629
Harrier R1.2.5
P4 rev: CL328629 with 0 local change(s).
Modem CDROM status : Disabled
Chipset platform : ICERA
Lock status: Not locked

++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++++

This modem 2 don't conect to 3G SERVICE and not conect to GPRS

The modem 3 the same problem.

The modem 1 work perfect.

Please i need urgent solution.

Thanks you.

Edited by itachixd
Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...