Mk2 flashed with Mk3 package install problem

[La_Vallette]

Attached is the boot information obtained from Serial of which I assume is wifi Pineapple mk2. (pic below)

My question is if all basic components like firmware etc is the latest I could flash or if there is something newer.

I changed it's ip address from 172.16.42.1 to 192.168.1.110 in order to connect it to my default gateway.

My pineapple has access to the internet as I tried ping google.com with success.

I am trying to update my packages with opkg update but the link seems to be down.

root@Pineapple:~# opkg update
Package opkg version 4564-3.1 has no valid architecture, ignoring.
Downloading http://downloads.openwrt.org/snapshots/trunk/atheros/packages/Packages.gz.
Updated list of available packages in /var/opkg-lists/barrier_breaker.
Downloading http://downloads.x-wrt.org/xwrt/snapshots/trunk/atheros/packages/Packages.gz.
Collected errors:
 * opkg_download: Failed to download http://downloads.x-wrt.org/xwrt/snapshots/trunk/atheros/packages/Packages.gz, wget returned 4.

How can I fix this ? Is there any other way?

I cannot install any jasager version, madwifi, kmod etc..

root@Pineapple:~# opkg install jasager_2.1-1_mips.ipk
Package opkg version 4564-3.1 has no valid architecture, ignoring.
Unknown package 'jasager'.
Collected errors:
 * pkg_hash_fetch_best_installation_candidate: Packages for jasager found, but incompatible with the architectures configured
 * opkg_install_cmd: Cannot install package jasager.

I aprecciate if you can point me to recommended jasager and webif versions..

thanks

+PHY ID is 0022:5521
Ethernet eth0: MAC address 00:12:cf:a4:90:50
IP: 192.168.0.1/255.255.255.0, Gateway: 0.0.0.0
Default server: 0.0.0.0

RedBoot(tm) bootstrap and debug environment [ROMRAM]
Non-certified release, version v1.3.4 - built 19:22:52, Oct 15 2007

Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.

Board: ap51 
RAM: 0x80000000-0x82000000, [0x8003eaf0-0x80fe1000] available
FLASH: 0xa8000000 - 0xa87f0000, 128 blocks of 0x00010000 bytes each.
== Executing boot script in 3.000 seconds - enter ^C to abort
RedBoot> fis load -l vmlinux.bin.l7
Image loaded from 0x80041000-0x802a73e0
RedBoot> exec
Now booting linux kernel:
 Base address 0x80030000 Entry 0x80041000
 Cmdline : 
[    0.000000] Linux version 2.6.37.6 (sebkinne@WorkstationMeltdown) (gcc version 4.5.4 20120105 (prerelease) (Linaro GCC 4.5-2012.01) ) #4 Sat Jan 28 03:52:49 CET 2012
[    0.000000] ar2315-gpio: registered 22 GPIOs
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 00019064 (MIPS 4KEc)
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone PFN ranges:
[    0.000000]   Normal   0x00000000 -> 0x00002000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00002000
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
[    0.000000] Kernel command line:  console=ttyS0,9600 rootfstype=squashfs,jffs2
[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Primary instruction cache 16kB, VIPT, 4-way, linesize 16 bytes.
[    0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 16 bytes
[    0.000000] Memory: 29616k/32768k available (1993k kernel code, 3152k reserved, 311k data, 152k init, 0k highmem)
[    0.000000] NR_IRQS:128
[    0.000000] console [ttyS0] enabled, bootconsole disabled
[    0.000000] console [ttyS0] enabled, bootconsole disabled
[    0.010000] Calibrating delay loop... 183.50 BogoMIPS (lpj=917504)
[    0.260000] pid_max: default: 32768 minimum: 301
[    0.270000] Mount-cache hash table entries: 512
[    0.290000] NET: Registered protocol family 16
[    0.970000] bio: create slab <bio-0> at 0
[    0.990000] pci 0000:00:00.0: BAR 1: can't assign mem (size 0x4000000)
[    1.000000] pci 0000:00:03.0: BAR 1: can't assign mem (size 0x4000000)
[    1.010000] pci 0000:00:00.0: BAR 2: assigned [mem 0x80800000-0x80bfffff]
[    1.020000] pci 0000:00:00.0: BAR 2: set to [mem 0x80800000-0x80bfffff] (PCI address [0x80800000-0x80bfffff])
[    1.030000] pci 0000:00:03.0: BAR 2: assigned [mem 0x80c00000-0x80ffffff]
[    1.040000] pci 0000:00:03.0: BAR 2: set to [mem 0x80c00000-0x80ffffff] (PCI address [0x80c00000-0x80ffffff])
[    1.050000] pci 0000:00:00.0: BAR 0: assigned [mem 0x81000000-0x8101ffff]
[    1.060000] pci 0000:00:00.0: BAR 0: set to [mem 0x81000000-0x8101ffff] (PCI address [0x81000000-0x8101ffff])
[    1.070000] pci 0000:00:03.0: BAR 0: assigned [mem 0x81020000-0x8103ffff]
[    1.080000] pci 0000:00:03.0: BAR 0: set to [mem 0x81020000-0x8103ffff] (PCI address [0x81020000-0x8103ffff])
[    1.090000] Switching to clocksource MIPS
[    1.110000] NET: Registered protocol family 2
[    1.170000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[    1.250000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[    1.340000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    1.410000] TCP: Hash tables configured (established 1024 bind 1024)
[    1.490000] TCP reno registered
[    1.530000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    1.600000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    1.670000] NET: Registered protocol family 1
[    1.730000] Radio config found at offset 0xf8(0x1f8)
[    1.800000] Radio MAC is blank; using board-data
[    1.870000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.940000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    2.050000] msgmni has been set to 57
[    2.100000] io scheduler noop registered
[    2.150000] io scheduler deadline registered (default)
[    2.210000] gpiodev: gpio device registered with major 254
[    2.280000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    2.380000] serial8250: ttyS0 at MMIO 0xb1100003 (irq = 37) is a 16550A
[    2.470000] cmdlinepart partition parsing not available
[    2.540000] Searching for RedBoot partition table in spiflash at offset 0x7d0000
[    2.720000] Searching for RedBoot partition table in spiflash at offset 0x7e0000
[    2.910000] 6 RedBoot partitions found on MTD device spiflash
[    2.980000] Creating 6 MTD partitions on "spiflash":
[    3.040000] 0x000000000000-0x000000030000 : "RedBoot"
[    3.110000] 0x000000030000-0x000000700000 : "rootfs"
[    3.180000] mtd: partition "rootfs" set to be root filesystem
[    3.240000] mtd: partition "rootfs_data" created automatically, ofs=350000, len=3B0000 
[    3.340000] 0x000000350000-0x000000700000 : "rootfs_data"
[    3.410000] 0x000000700000-0x0000007d0000 : "vmlinux.bin.l7"
[    3.490000] 0x0000007e0000-0x0000007ef000 : "FIS directory"
[    3.570000] 0x0000007ef000-0x0000007f0000 : "RedBoot config"
[    3.640000] 0x0000007f0000-0x000000800000 : "boardconfig"
[    3.790000] eth0: Atheros AR231x: 00:12:cf:a4:90:50, irq 4
[    3.930000] ar231x_eth_mii: probed
[    3.970000] eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0:00)
[    4.060000] TCP westwood registered
[    4.100000] NET: Registered protocol family 17
[    4.150000] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
[    4.230000] All bugs added by David S. Miller <davem@redhat.com>
[    4.340000] VFS: Mounted root (squashfs filesystem) readonly on device 31:1.
[    4.420000] Freeing unused kernel memory: 152k freed
- preinit -
Press the [f] key and hit [enter] to enter failsafe mode
- regular preinit -
[   13.830000] JFFS2 notice: (271) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 4 of xref (0 dead, 0 orphan) found.
switching to jffs2
- init -

Please press Enter to activate this console. [   16.880000] Compat-wireless backport release: compat-wireless-2011-11-29
[   16.960000] Backport based on wireless-testing.git master-2011-12-01
[   17.450000] cfg80211: Calling CRDA to update world regulatory domain
[   21.250000] cfg80211: World regulatory domain updated:
[   21.310000] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   21.410000] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   21.510000] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   21.600000] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   21.700000] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   21.790000] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   21.900000] ath5k phy0: Atheros AR2315 chip found (MAC: 0x86, PHY: 0x48)
[   22.530000] cfg80211: Calling CRDA for country: US
[   22.710000] cfg80211: Regulatory domain changed to country: US
[   22.780000] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   22.880000] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[   22.980000] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[   23.080000] cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   23.170000] cfg80211:     (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   23.270000] cfg80211:     (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   23.360000] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[   24.050000] RPC: Registered udp transport module.
[   24.110000] RPC: Registered tcp transport module.
[   24.160000] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   25.530000] PPP generic driver version 2.4.2
[   26.690000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   27.720000] NET: Registered protocol family 24
[   28.490000] nf_conntrack version 0.5.0 (465 buckets, 1860 max)
[   35.300000] device eth0 entered promiscuous mode
[   35.450000] br-lan: port 1(eth0) entering forwarding state
[   35.510000] br-lan: port 1(eth0) entering forwarding state
[   41.520000] device eth0 left promiscuous mode
[   41.580000] br-lan: port 1(eth0) entering forwarding state
[   43.440000] device eth0 entered promiscuous mode
[   43.490000] br-lan: port 1(eth0) entering forwarding state
[   43.560000] br-lan: port 1(eth0) entering forwarding state
[   43.760000] device wlan0 entered promiscuous mode
[   43.820000] br-lan: port 2(wlan0) entering forwarding state
[   43.880000] br-lan: port 2(wlan0) entering forwarding state
[   45.470000] device wlan0 left promiscuous mode
[   45.530000] br-lan: port 2(wlan0) entering forwarding state
[   46.110000] device wlan0 entered promiscuous mode
[   46.160000] br-lan: port 2(wlan0) entering forwarding state
[   46.230000] br-lan: port 2(wlan0) entering forwarding state
[   48.310000] eth0: Configuring MAC for full duplex
[   72.130000] device wlan0 left promiscuous mode
[   72.190000] br-lan: port 2(wlan0) entering forwarding state
[   74.970000] device wlan0 entered promiscuous mode
[   75.090000] br-lan: port 2(wlan0) entering forwarding state
[   75.160000] br-lan: port 2(wlan0) entering forwarding state
[   77.330000] device wlan0 left promiscuous mode
[   77.380000] br-lan: port 2(wlan0) entering forwarding state
[   77.950000] device wlan0 entered promiscuous mode
[   78.010000] br-lan: port 2(wlan0) entering forwarding state
[   78.080000] br-lan: port 2(wlan0) entering forwarding state



BusyBox v1.19.3 (2012-01-27 03:52:18 CET) built-in shell (ash)
Enter 'help' for a list of built-in commands.

  _______                     ________        __                          \
 |       |.-----.-----.-----.|  |  |  |.----.|  |_                      \  \
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|                   \  \  \
 |_______||   __|_____|__|__||________||__|  |____|   <,  .v ,  // ) ) )  )  )
          |__| W I R E L E S S   F R E E D O M         \\; \// //     /  /  /
 ATTITUDE ADJUSTMENT (bleeding edge, r29839) ---------- ;\\|||//;       /  /
  * 1/4 oz Vodka      Pour all ingredients into mixing ,'<\/><\/`         /
  * 1/4 oz Gin        tin with ice, strain into glass.,.`X/\><\\>`
  * 1/4 oz Amaretto                                   ;>/>><\\><\/`
  * 1/4 oz Triple sec                                 |<\\>>X/<>/\|
  * 1/4 oz Peach schnapps                             `<\/><\/><\\;
  * 1/4 oz Sour mix                                    '/\<>/\<>/'
  * 1 splash Cranberry juice                             `<\/><;`
 -----------------------------------------------------WiFi_Pineapple MKIII

root@Pineapple:/# 

Edited July 22, 2013 by La_Vallette