Jump to content


Photo
- - - - -

Airdrop-Ng On Raspberry Pi


  • Please log in to reply
5 replies to this topic

#1 totsltmega

totsltmega

    Newbie

  • Active Members
  • 4 posts

Posted 23 August 2012 - 08:30 AM

Hey, I have been fiddling with getting airdrop-ng http://www.aircrack-...p?id=airdrop-ng to work correctly on my raspberry pi fore some days now.
I have tried it on the default Debian distribution called raspbian http://www.raspberrypi.org/downloads and with the hacking version pwnpi http://sourceforge.net/projects/pwnpi/

The thing is that when I finally installed the libraries lorcon and pylorcon, and start the airdrop-ng program it says: interface mon0 does not exist. even tho I created mon0 with airmon-ng.

airdrop-ng works fine in BT5 with my alfa wifi awus036h which has the rtl8187 chipset. I think the problem is that lorcon does not have my driver installed.
I have tried to install both lorcon-old as described in the installation notes and the newer lorcon2, even tried to compile it form svn.

Anyone here who has a Raspberry Pi and get this to work?

I really appreciate if anyone can look in to this :)

#2 totsltmega

totsltmega

    Newbie

  • Active Members
  • 4 posts

Posted 24 August 2012 - 05:45 AM

Nevermind solved it myself, it was several problems:

1: airdrop-ng doesnt install correctly with the new aircrack-ng suite and it wants lorcon2. so i got the aircrack-ng suite from my BT5
2: the installation didnt move a file called oui.txt to /usr/lib/aircrack-ng so had to do it maually.
3: had to edit the airdrop-ng program because tx.getchannel() dont work, maybe just my card.

so if anyone want to do mass deauths with their pi I can post instsructions or the image file later on.

#3 Neworld

Neworld

    Hak5 Zombie

  • Active Members
  • PipPipPipPipPip
  • 237 posts

Posted 24 August 2012 - 09:46 PM

Nevermind solved it myself, it was several problems:

1: airdrop-ng doesnt install correctly with the new aircrack-ng suite and it wants lorcon2. so i got the aircrack-ng suite from my BT5
2: the installation didnt move a file called oui.txt to /usr/lib/aircrack-ng so had to do it maually.
3: had to edit the airdrop-ng program because tx.getchannel() dont work, maybe just my card.

so if anyone want to do mass deauths with their pi I can post instsructions or the image file later on.


I would actually be very interested in these instructions :D

Send me a PM or something.

#4 totsltmega

totsltmega

    Newbie

  • Active Members
  • 4 posts

Posted 25 August 2012 - 03:52 AM

Here is instructions to install, a SD image will come later with autolauch of airdrop to deny all. Headless :)
http://www41.zippysh...84318/file.html

Remember to use a powerful powersuply for the pi and the wifi card like a powered hub at least 1A for my alfa card.
The wifi card should be connected directly to the pi, but I use a spitted usb cable to get power from the hub.

Edited by totsltmega, 25 August 2012 - 05:13 AM.


#5 Neworld

Neworld

    Hak5 Zombie

  • Active Members
  • PipPipPipPipPip
  • 237 posts

Posted 25 August 2012 - 09:47 AM

This will work great! Thanks :D

Haven't tried it yet... I've been really busy lately.
I'll report my thoughts when I get a chance. :D

#6 totsltmega

totsltmega

    Newbie

  • Active Members
  • 4 posts

Posted 25 August 2012 - 10:26 AM

Yeah hope it works for you too.

here is a image from a SD card, with the same instructions, and a program to load the image is included. Minimum 2gb.

http://www.adrive.co..._2012-08-25.zip

The image will auto deauth all clients in range, but will only work out of the box if your wificard is wlan0.

Edited by totsltmega, 26 August 2012 - 10:41 AM.





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users