Search the Community

Hi all, I'm a newbie to Hak5 Forums, so if this thread is in the wrong category, it would be great if the admins could move it to the correct category. Most of you are probably using 'BO' as the region for 'iw' on Linux. This allows the WiFi interface to operate at 30dBm (1 Watt) at max. However, if you're like me and have a device that is capable of transmitting over 1W (I have Alpha Network AWUS036NH - 2W), you might be interested in increasing the TX power beyond 30dBm. By default, selecting 'BO' as the region only allows the device to operate at a maximum of 30dBm. I tested this on my Raspberry Pi 3, Model B running Kali Linux (with the kali-linux-full metapackage). *** If you are lazy and don't want to follow these manual steps below, I made two bash scripts that will work on Kali Linux and Ubuntu : https://github.com/hiruna/wifi-txpower-unlocker Working directory: /root Steps: 1. Update and upgrade apt-get update apt-get upgrade 2. Install dependencies to compile apt-get install pkg-config libnl-3-dev libgcrypt11-dev libnl-genl-3-dev build-essential 3. Download the latest Central Regulatory Domain Agent (CRDA) and Wireless Regulatory Database I downloaded crda-3.18.tar.xz and wireless-regdb-2017.03.07.tar.xz wget https://www.kernel.org/pub/software/network/crda/crda-3.18.tar.xz wget https://www.kernel.org/pub/software/network/wireless-regdb/wireless-regdb-2017.03.07.tar.xz 4. Unzip the downloaded files tar xvJf crda-3.18.tar.xz tar xvJf wireless-regdb-2017.03.07.tar.xz 5. Navigate into wireless-regdb-2017.03.07 cd wireless-regdb-2017.03.07 6. Open db.txt and locate the region BO section nano db.txt You will see something like this: country BO: DFS-JP (2402 - 2482 @ 40), (30) (5250 - 5330 @ 80), (30), DFS (5735 - 5835 @ 80), (30) The number in the second set of brackets (for each frequency) is the txpower. Since I'm using the 2.4Ghz and want a txpower of 2W (~33dBm), I changed the 20 to 33, and saved the file: country BO: DFS-JP (2402 - 2482 @ 40), (33) (5250 - 5330 @ 80), (30), DFS (5735 - 5835 @ 80), (30) I also noticed that region AU allows 36dBm for 2.4Ghz, so you could just continue without modifying the region BO: country AU: DFS-ETSI (2400 - 2483.5 @ 40), (36) (5150 - 5250 @ 80), (23), NO-OUTDOOR, AUTO-BW (5250 - 5350 @ 80), (20), NO-OUTDOOR, AUTO-BW, DFS (5470 - 5600 @ 80), (27), DFS (5650 - 5730 @ 80), (27), DFS (5730 - 5850 @ 80), (36) (57000 - 66000 @ 2160), (43), NO-OUTDOOR However, I checked with Kali Linux (without compiling and changing the regulatory.bin) and it showed that max txpower was only 20dBm: country AU: DFS-ETSI (2402 - 2482 @ 40), (N/A, 20), (N/A) (5170 - 5250 @ 80), (N/A, 17), (N/A), AUTO-BW (5250 - 5330 @ 80), (N/A, 24), (0 ms), DFS, AUTO-BW (5490 - 5710 @ 160), (N/A, 24), (0 ms), DFS (5735 - 5835 @ 80), (N/A, 30), (N/A) So I'm assuming Kali Linux is using an old regulatory.bin and legislation in AU has changed. 7. Compile make 8. Backup up your old regulatory.bin file and move the new file into /lib/crda mv /lib/crda/regulatory.bin /lib/crda/regulatory.bin.old mv regulatory.bin /lib/crda As mentioned in https://wireless.wiki.kernel.org/en/developers/regulatory/crda and https://wireless.wiki.kernel.org/en/developers/regulatory/wireless-regdb, we need to include RSA public keys in crda-3.18/pubkeys. I noticed that there are already 2 .pem files in crda-3.18/pubkeys: sforshee.key.pub.pem linville.key.pub.pem 9. Copy root.key.pub.pem into crda-3.18/pubkeys. I also copied sforshee.key.pub.pem from wireless-regdb-2017.03.07 as it was newer: cp root.key.pub.pem ../crda-3.18/pubkeys/ cp sforshee.key.pub.pem ../crda-3.18/pubkeys/ I found that there are two other pubkeys located at /lib/crda : -rw-r--r-- 1 root root 451 Jan 18 12:58 benh@debian.org.key.pub.pem -rw-r--r-- 1 root root 451 Jan 18 12:58 linville.key.pub.pem -rw-r--r-- 1 root root 451 Jan 18 12:58 sforshee.key.pub.pem So I copied them too (wasn't too sure whether I needed to copy them): cp /lib/crda/pubkeys/benh\@debian.org.key.pub.pem ../crda-3.18/pubkeys/ cp /lib/crda/pubkeys/linville.key.pub.pem ../crda-3.18/pubkeys/ 10. Navigate into crda-3.18 and open the Makefile cd ../crda-3.18 nano Makefile In Kali Linux, crda is located at /lib/crda instead of /usr/bin/crda, so in the file change the 3rd line REG_BIN?=/usr/lib/crda/regulatory.bin to REG_BIN?=/lib/crda/regulatory.bin : REG_BIN?=/lib/crda/regulatory.bin 11. In the Makefile, find the line CFLAGS += -std=gnu99 -Wall -Werror -pedantic and remove the -Werror option (I couldn't compile without changing it as it treats warnings as errors): CFLAGS += -std=gnu99 -Wall -pedantic 12. Compile make clean make make install That's it! I rebooted my Raspberry Pi after compiling. reboot 13. Now let's change the region and set the txpower to 33dBm: ifconfig wlan1 down iw reg set BO iwconfig wlan1 txpower 33 ifconfig wlan1 up