Search the Community

Hi there, I have an annoying and frustrating situation with my router which led me to this forum, my isp has provided a router of their own (huawei hg8546m gpon ont ), but its locked by isp, the default router router access ip 192.168.100.1 does not work, i reset the router once in frustration, i was able to get into the admin page this time but my internet didn't worked, all the settings and configuration were wiped out. i wonder if there's any backdoor to router so that I could play all of its features without affecting my internet... thx.

I purchased two "managed modems" today from Amazon: 1) Huawei 355 2) Verizon Novatel MiFi 5510L Can anyone recommend the best place to buy sim cards with cash, that won't require a social security number for each of these modems. Any specific stores or websites. I'm located in the US. Thanks in advance.

Hello! I know; there's lotsa older discussions related/around modem support for MK IV, but not with this particular modem. Anyone tested with this model (Huawei E5776s-32) ? It certainly finds the device, but only as storage - makes me wonder: Does the dongle drive modem through the USB at all? Thanks.

I guys, I have a Huawei E587 modem which is not supported out of the box (as it seems) by the MKV, I'm following this guide, so my steps were: - Install cdc_ncm package. opkg -nodeps install http://galapago.sakura.ne.jp/openwrt/12_09_rc1/kmod-usb-net-cdc-ncm_3.3.8-1_ar71xx.ipk - Install modeswitch's parameter file for E587 cd /etc/usbmodeswitch.d wget -O 12d1:1c1b http://galapago.sakura.ne.jp/openwrt/12_09_rc1/12d1_1c1b Now when I plug the device to the usb port, I see the following dmesg: [ 1938.820000] usb 1-1.2: new high-speed USB device number 14 using ehci-platform [ 1938.970000] option 1-1.2:1.0: GSM modem (1-port) converter detected [ 1938.970000] usb 1-1.2: GSM modem (1-port) converter now attached to ttyUSB0 [ 1938.980000] scsi9 : usb-storage 1-1.2:1.1 [ 1939.000000] usb 1-1.2: MAC-Address: 0x0c:0x5b:0x8f:0x27:0x9a:0x64 [ 1939.010000] cdc_ncm 1-1.2:1.2: wwan0: register 'cdc_ncm' at usb-ehci-platform-1.2, Mobile Broadband Network Device, 0c:5b:8f:27:9a:64 [ 1939.980000] scsi 9:0:0:0: CD-ROM HUAWEI Mass storage ffff PQ: 0 ANSI: 2 [ 1939.990000] scsi 9:0:0:0: Attached scsi generic sg0 type 5 [ 1939.990000] scsi 9:0:0:1: Direct-Access HUAWEI Mass storage ffff PQ: 0 ANSI: 2 [ 1940.000000] sd 9:0:0:1: Attached scsi generic sg1 type 0 [ 1940.030000] sd 9:0:0:1: [sda] Attached SCSI removable disk ( The cd-rom stuff it's normal, the device has a built in partition with softwares for windows ). So far so good, if I execute ifconfig -a I see the interface with the right mac address: wwan0 Link encap:Ethernet HWaddr 0C:5B:8F:27:9A:64 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Now, since the protocol ncm is not in the list of the mobile configuration web ui, if I try to put it as a custom protocol nothing happens ( pppd is not launched basically ), if I try other configs such as: config interface 'wan2' option proto '3g' option device '/dev/ttyUSB0' option service 'umts' option apn 'MY_APN' option username 'MY_USERNAME' option password 'MY_PASSWORD' option defaultroute '1' I get the following (error) logs from pppd: Jan 1 00:51:24 Pineapple daemon.notice pppd[24955]: pppd 2.4.5 started by root, uid 0 Jan 1 00:51:25 Pineapple local2.info chat[24971]: abort on (BUSY) Jan 1 00:51:25 Pineapple local2.info chat[24971]: abort on (NO CARRIER) Jan 1 00:51:25 Pineapple local2.info chat[24971]: abort on (ERROR) Jan 1 00:51:25 Pineapple local2.info chat[24971]: report (CONNECT) Jan 1 00:51:25 Pineapple local2.info chat[24971]: timeout set to 10 seconds Jan 1 00:51:25 Pineapple local2.info chat[24971]: send (AT&F^M) Jan 1 00:51:25 Pineapple local2.info chat[24971]: expect (OK) Jan 1 00:51:25 Pineapple local2.info chat[24971]: AT&F^M^M Jan 1 00:51:25 Pineapple local2.info chat[24971]: OK Jan 1 00:51:25 Pineapple local2.info chat[24971]: -- got it Jan 1 00:51:25 Pineapple local2.info chat[24971]: send (ATE1^M) Jan 1 00:51:25 Pineapple local2.info chat[24971]: expect (OK) Jan 1 00:51:25 Pineapple local2.info chat[24971]: ^M Jan 1 00:51:29 Pineapple local2.info chat[24971]: ATE1^M^M Jan 1 00:51:29 Pineapple local2.info chat[24971]: ^BOOT:478988,0,0,0,99^M Jan 1 00:51:30 Pineapple local2.info chat[24971]: ^M Jan 1 00:51:30 Pineapple local2.info chat[24971]: ^RSSI:10^M Jan 1 00:51:30 Pineapple local2.info chat[24971]: ^M Jan 1 00:51:30 Pineapple local2.info chat[24971]: ^CSNR:-93,-7^M Jan 1 00:51:33 Pineapple local2.info chat[24971]: ^M Jan 1 00:51:33 Pineapple local2.info chat[24971]: ^RSSI:10^M Jan 1 00:51:33 Pineapple local2.info chat[24971]: ^M Jan 1 00:51:33 Pineapple local2.info chat[24971]: ^CSNR:-96,-10^M Jan 1 00:51:35 Pineapple local2.info chat[24971]: alarm Jan 1 00:51:35 Pineapple local2.info chat[24971]: Failed Jan 1 00:51:35 Pineapple daemon.err pppd[24955]: Connect script failed Jan 1 00:51:36 Pineapple daemon.info pppd[24955]: Exit. Jan 1 00:51:36 Pineapple daemon.notice netifd: Interface 'wan2' is now down Can you help me please? Thanks :)

Anyone here got the huawei e5776 usb tethering to work ? I have had some mixed results with writing my own /etc/usb_modeswitch.d/12d1\:1506 and echo '12d1 1506' > /sys/bus/usb-serial/drivers/option1/new_id But neve got to see a ethX show up Regards Thermostaten

Has anyone had success to get 4G (Huawei E392) to work with Pineapple V? Looking at the log it only sees the storage part. Jan 1 00:01:40 Pineapple kern.info kernel: [ 172.200000] usb 1-1.2: new high-speed USB device number 5 using ehci-platform Jan 1 00:01:40 Pineapple kern.info kernel: [ 172.340000] scsi1 : usb-storage 1-1.2:1.0 Jan 1 00:01:41 Pineapple kern.notice kernel: [ 173.340000] scsi 1:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 0 Jan 1 00:01:41 Pineapple kern.notice kernel: [ 173.340000] scsi 1:0:0:0: Attached scsi generic sg1 type 5

Hi guys, I just bought a Huawei E303C USB modem, does anybody knows the configuration for that model, I already search at http://www.draisberghof.de/usb_modeswitch/device_reference.txt but I could't find it. Thanks !

Hi I realy need your guys help! Having problem getting the Huawei E1550 working with the MarkIV 2.7. I get the following: 00:48:40 Pineapple daemon.info pppd[8469]: Exit. 00:48:39 Pineapple daemon.notice pppd[8469]: Connection terminated. 00:48:33 Pineapple daemon.warn pppd[8469]: IPCP: timeout sending Config-Requests 00:47:59 Pineapple local2.info chat[8473]: timeout set to 30 seconds 00:47:59 Pineapple local2.info chat[8473]: send (ATD*99***1#^M) 00:47:59 Pineapple local2.info chat[8473]: send ( ^M) 00:47:59 Pineapple local2.info chat[8473]: expect (OK) 00:47:59 Pineapple local2.info chat[8473]: expect (CONNECT) 00:47:59 Pineapple local2.info chat[8473]: ^M 00:47:59 Pineapple local2.info chat[8473]: ^M 00:47:59 Pineapple local2.info chat[8473]: OK 00:47:59 Pineapple local2.info chat[8473]: CONNECT 00:47:59 Pineapple local2.info chat[8473]: ATD*99***1#^M^M 00:47:59 Pineapple local2.info chat[8473]: AT+CGDCONT=1,"IP","internet"^M^M 00:47:59 Pineapple local2.info chat[8473]: -- got it 00:47:59 Pineapple local2.info chat[8473]: -- got it 00:47:59 Pineapple daemon.notice pppd[8469]: Connect: 3g-wan2 <--> /dev/ttyUSB0 00:47:59 Pineapple daemon.info pppd[8469]: Using interface 3g-wan2 00:47:59 Pineapple daemon.info pppd[8469]: Serial connection established. 00:47:58 Pineapple local2.info chat[8473]: timeout set to 10 seconds 00:47:58 Pineapple local2.info chat[8473]: send (ATE1^M) 00:47:58 Pineapple local2.info chat[8473]: send (AT+CGDCONT=1,"IP","internet"^M) 00:47:58 Pineapple local2.info chat[8473]: send (AT&F^M) 00:47:58 Pineapple local2.info chat[8473]: report (CONNECT) 00:47:58 Pineapple local2.info chat[8473]: expect (OK) 00:47:58 Pineapple local2.info chat[8473]: expect (OK) 00:47:58 Pineapple local2.info chat[8473]: abort on (NO CARRIER) 00:47:58 Pineapple local2.info chat[8473]: abort on (ERROR) 00:47:58 Pineapple local2.info chat[8473]: abort on (BUSY) 00:47:58 Pineapple local2.info chat[8473]: ^M 00:47:58 Pineapple local2.info chat[8473]: OK 00:47:58 Pineapple local2.info chat[8473]: OK 00:47:58 Pineapple local2.info chat[8473]: ATE1^M^M 00:47:58 Pineapple local2.info chat[8473]: AT&F^M^M 00:47:58 Pineapple local2.info chat[8473]: -- got it 00:47:58 Pineapple local2.info chat[8473]: -- got it 00:47:57 Pineapple daemon.notice pppd[8469]: pppd 2.4.5 started by root, uid 0 00:47:57 Pineapple daemon.info dnsmasq[1087]: using nameserver 8.8.8.8#53 00:47:57 Pineapple daemon.info dnsmasq[1087]: using local addresses only for domain lan 00:47:57 Pineapple daemon.info dnsmasq[1087]: reading /tmp/resolv.conf.auto 00:47:54 Pineapple daemon.notice pppd[8419]: Modem hangup 00:47:54 Pineapple daemon.notice netifd: Interface 'wan2' is now down 00:47:54 Pineapple daemon.info pppd[8419]: Exit. 00:47:53 Pineapple daemon.notice pppd[8419]: Connection terminated. My configuration are as: *12d1:1001*) echo "Huawei E1550 detected. Attempting mode switch" uci delete network.wan2 uci set network.wan2=interface uci set network.wan2.ifname=ppp0 uci set network.wan2.proto=3g uci set network.wan2.service=umts uci set network.wan2.device=/dev/ttyUSB0 uci set network.wan2.apn=apn uci set network.wan2.username=tmn uci set network.wan2.password=tmn uci set network.wan2.defaultroute=1 uci commit network usb_modeswitch -v 12d1 -p 1001 -M 55534243123456780000000000000011060000000000000000000000000000 sleep 10; rmmod usbserial sleep 3; insmod usbserial vendor=0x12d1 product=0x1001 sleep 5; /etc/init.d/firewall disable; /etc/init.d/firewall stop logger "3G: firewall stopped" iptables -t nat -A POSTROUTING -s 172.16.42.0/24 -o 3g-wan2 -j MASQUERADE iptables -A FORWARD -s 172.16.42.0/24 -o 3g-wan2 -j ACCEPT iptables -A FORWARD -d 172.16.42.0/24 -m state --state ESTABLISHED,RELATED -i 3g-wan2 -j ACCEPT ;; I have tried changin the password= and username= to blank also changing apn to internet. Realy appriciate any help i can get. Thanks!