enderffx

Active Members
  • Content count

    27
  • Joined

  • Last visited

About enderffx

  • Rank
    Hak5 Fan
  1. Hi ! I was under the impression that DJI has the copter decide if it is in FCC / CE country based on GPS location and using an internal FCC/CE map. There was a successful probe to fake sat transmissions (you can do with $150 Hardware) while shiielding he real sats or inside. You have to do that while Mavic Startup, COntroller or Android App does not come into play. Did you try with RF meter if Tx / Rx power changes ?! maybe this is just for the WiFI connection, like WiFixManager.apk ? WOULD be great but hard to believe :-( Ender
  2. Yes, i can confirm, Spark supported by 112 versions of DJI Assistant ! Ender
  3. Do you have any idea if that version supports Spark as well ? If not then all this probably is irrelevant for Spark, right ? ---Trying to get a grip on this, but just beeing a regular coder and not well versed on hacking / rev engeneering its hard for me--- Ender
  4. Okay... how about a W7 VM ? For comfort you could use this one, DJI Assistant already installed: http://mavicpilots.com/threads/i-created-a-vm-so-we-can-all-forever-downgrade-to-400.16619/page-26#post-231468 First link, about 5gb Ender
  5. Oh god huo much i hate Twitter :-) But thanks for the link. Those guys are also really onto the matter. I saw them referring to POV, but unluckily he went under the surface sooan after the famous FW root Thread weas deleted on MavicPilots. I had limited contact to him.Did you really grok how the patches DJI_A to write stuff ? I saw the command hightlighted but i have the opinopn thats the patched SDK they were refering to ? Greetings, Ender
  6. Wow, great work and beyond my capabilties, Well done ! Ionly have a crappy reflow workstation ;-) Ender
  7. Oh crap, as i am a newbie i can not guess why that happens. DO you have hope of getting it to work ? (And please if you can, share which EMMC Interface you use and where good soldering points are). Greetings, Nils
  8. Were you able to mount the partitions from that image ? Cant you modify the files (like enableing ADB) and flash back ? Could you elaborate ? (Emmc Interface used, soldering points, ...) Thank you ! Ender
  9. Ouch ;-( probably worked in that old < .200 Firmware... The other way to het access would surely be EMMC soldering, i have an EMMC Interface, any idea where those points are ? Ender
  10. Sounds good, but as you state "no root" its probably not easy :-) So i obviously have to ask: Where to get board SN ? Where is the debug UART, via USB2Serial onthe regular port ? Or the hidden one ? or testpoints on the PCB ? Ender
  11. It is said to contain the flight logs. Makes a lot of sense in any case, easy data retrival even if the Mainboard is zapped or was emerged in water... (POV stated that afair) Ender
  12. P.S. i have more plans for the Spark ;-)
  13. Actually i have 2 gioals: As a Quadcopter pilot i'd love to have FCC tranbsmit power instead of CE but thats not too important as the Mavic has fantastic penetration and range even in CE country. Much more i'd love to cross compile for the Mavic to use USB Hardware. Either via Interfacing and processing the data directy OR by using an Android USB via WiFi client to do the processing in the Ground station. I am doing that on the Bebop 1 & 2 by Bebop with success. And of course it bugs me to have bought a device i do not have 100% access to. I'd also like to increase Bitrate of 2.7k h.264 (it was higher in the first FW's afaik and 4k makes no sense with the tiny optics, i measured that in a MavicPilots Thread). I'd also like to do Multiple Exposure and averaging & denpoising stuff as i am originally programming for image processing. All kinds of stuff but #1 would be the USB Server stuff... Ender
  14. Ahh was that the famous path traversal exploit ? POV mentioned that and i tried all i could to later learn that it was fixed in the FW version i used... Ender
  15. Interesting... So if you downgrade the FW and root could you not insert stuff to stay rooted after the update or at least to ease the process ? Ender