Jump to content

Coroner

Active Members
  • Posts

    13
  • Joined

  • Last visited

Recent Profile Visitors

851 profile views

Coroner's Achievements

Newbie

Newbie (1/14)

  1. i have also had this problem, as far as i can see when i try to run or view modules that are installed on sdcard it seems to bottleneck.. taking sd card out sometimes fixed the problem .. other times when i went to manage modules there would be a blank module on my installed list with a remove button and on the download list the button would say update.. however update didnt do anything and formatting the sdcard was all i could really do
  2. i have been trying to use the pineapple app to use while mobile, but when teathering thru usb to the markV i get no response to the android phone, does the markV not supply power thru the usb? would love to get this app goign as i am struggling to share a internet signal while mobile, id prefer not to buy a 4g usb modem cheers
  3. i have tried multiple ways of formatting the card, i loaded the 2.4 firmware and formatted the card, upgraded the system to 3.0.0 and before doing anything i format the sd card.. i put the sdcard into a windows machine as i know windows/dos terminal commands alot more than linux.. checking the partition on a 2gb sd card i noticed it is only allocating 867mb to the sd drive and has 1.2gb unallocated.. i let the pineapple format the sdcard to make sure i have the right config i am now getting this [ 1678.190000] Write-error on swap-device (8:0:48) [ 1678.220000] Write-error on swap-device (8:0:56) [ 1678.220000] Write-error on swap-device (8:0:64) [ 1678.220000] Write-error on swap-device (8:0:72) [ 1678.330000] Write-error on swap-device (8:0:80) [ 1678.330000] Write-error on swap-device (8:0:88) [ 1678.330000] Write-error on swap-device (8:0:96) [ 1678.340000] Write-error on swap-device (8:0:104) [ 1678.340000] Write-error on swap-device (8:0:112) [ 1678.450000] Write-error on swap-device (8:0:120) [ 1678.460000] Write-error on swap-device (8:0:128) [ 1678.470000] Write-error on swap-device (8:0:136) [ 1678.480000] Write-error on swap-device (8:0:144) [ 1678.480000] Write-error on swap-device (8:0:152) [ 1678.500000] Write-error on swap-device (8:0:160) [ 1678.500000] Write-error on swap-device (8:0:168) [ 1685.580000] Write-error on swap-device (8:0:176) [ 1685.640000] Write-error on swap-device (8:0:184) [ 1685.640000] Write-error on swap-device (8:0:192) [ 1685.660000] Write-error on swap-device (8:0:200) [ 1685.660000] Write-error on swap-device (8:0:208) [ 1685.660000] Write-error on swap-device (8:0:216) [ 1685.680000] Write-error on swap-device (8:0:224) [ 1685.680000] Write-error on swap-device (8:0:232) [ 1685.680000] Write-error on swap-device (8:0:240) [ 1685.710000] Write-error on swap-device (8:0:248) [ 1686.920000] Write-error on swap-device (8:0:256) [ 1687.020000] Write-error on swap-device (8:0:264) [ 1687.030000] Write-error on swap-device (8:0:272) [ 1687.040000] Write-error on swap-device (8:0:280) [ 1687.040000] Write-error on swap-device (8:0:288) [ 1687.050000] Write-error on swap-device (8:0:296) [ 1687.050000] Write-error on swap-device (8:0:304) [ 1688.950000] Write-error on swap-device (8:0:312) [ 1688.970000] Write-error on swap-device (8:0:320) [ 1688.970000] Write-error on swap-device (8:0:328) [ 1688.970000] Write-error on swap-device (8:0:336) [ 1688.990000] Write-error on swap-device (8:0:344) [ 1688.990000] Write-error on swap-device (8:0:352) [ 1690.010000] Write-error on swap-device (8:0:360) [ 1690.010000] Write-error on swap-device (8:0:368) [ 1690.030000] Write-error on swap-device (8:0:376) [ 1690.030000] Write-error on swap-device (8:0:384) edited ** seems to be fine now, no more error messages in the logs.. 30second powercycle did the trick
  4. i have tried using a tplink usb nic on the old firmware and never had luck getting the drivers to make it work, is their a special brand i need or does this firmware support more usb nic's? i'd test it out but my dongle is in a pc at a dif location
  5. hello legends.. loving the new ported interface, i am aware its a beta, i am meganoob when it comes to linux.. i notice a error in my logs and i was wondering what is happening, it appears to be with my storage any advice would be much appreciated Sat Aug 13 19:36:26 2016 kern.err kernel: [ 720.410000] Buffer I/O error on device sda1, logical block 35325 Sat Aug 13 19:36:26 2016 kern.warn kernel: [ 720.410000] EXT4-fs warning (device sda1): ext4_end_bio:317: I/O error -5 writing to inode 157 (offset 0 size 4096 starting block 286583) Sat Aug 13 19:36:26 2016 kern.err kernel: [ 720.570000] Aborting journal on device sda1-8. Sat Aug 13 19:36:26 2016 kern.err kernel: [ 720.570000] JBD2: Error -5 detected when updating journal superblock for sda1-8. Sat Aug 13 19:36:27 2016 kern.crit kernel: [ 721.700000] EXT4-fs error (device sda1): ext4_journal_check_start:56: Detected aborted journal Sat Aug 13 19:36:27 2016 kern.crit kernel: [ 721.710000] EXT4-fs (sda1): Remounting filesystem read-only Sat Aug 13 19:36:27 2016 kern.err kernel: [ 721.710000] EXT4-fs (sda1): previous I/O error to superblock detected Sat Aug 13 19:37:00 2016 kern.alert kernel: [ 754.040000] Write-error on swap-device (8:0:121) Sat Aug 13 19:42:10 2016 kern.crit kernel: [ 1064.520000] EXT4-fs error (device sda1): ext4_find_entry:1289: inode #23: comm nginx: reading directory lblock 0 Sat Aug 13 19:42:10 2016 kern.err kernel: [ 1064.530000] EXT4-fs (sda1): previous I/O error to superblock detected Sat Aug 13 19:42:21 2016 kern.crit kernel: [ 1075.700000] EXT4-fs error (device sda1): ext4_find_entry:1289: inode #121: comm nginx: reading directory lblock 0 Sat Aug 13 19:42:21 2016 kern.err kernel: [ 1075.710000] EXT4-fs (sda1): previous I/O error to superblock detected Sat Aug 13 19:45:02 2016 daemon.info hostapd: wlan0-1: STA 90:e7:c4:68:14:0a WPA: group key handshake completed (RSN)
  6. sorry, i am just learning.. is there a way to add another wlan connection using a usb wifi nic? i have one plugged in an under attached usb devices it shows up, but i dont know how to access it thru network tab on the pineapple gui Attached USB devices:Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 058f:6254 Alcor Micro Corp. USB Hub Bus 001 Device 003: ID 0bda:8187 Realtek Semiconductor Corp. RTL8187 Wireless Adapter Bus 001 Device 005: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader Bus 001 Device 007: ID 0bda:8179 Realtek Semiconductor Corp. RTL8188EUS 802.11n Wireless Network Adapter it is device 007 .. hopefully i can get another network connection to the pineapple Cheers Coroner
  7. when pineAP clones the SSID's that the phones are probing for, once they probe again and find the SSID made by the pineapple, i would of thought that they would hand over the SSID password fairly easily??
  8. Hello, so i live opposite a school and during drop off and pick up day 1.. pineapple harvested a ton of SSID's from mobile phones probing day 2.. had alot of connected clients connected to the SSID's pineAP made when the mobile phones connect to the SSID would they automatically give up the WPA stored password upon login? and if so is there an infusion that will siphon the password to a log file? they may only give up the password if wpa security is set to on.. maybe someone could make an infusion that acts like wpa is turned on and is requestiong a password while we are connected to the client and logging the information they give up Cheers Coroner
  9. ahhhh, i see, they are still down today :( thanks for the help, ill check again tomorrow, fingers crossed Coroner
  10. root@Pineapple:~# opkg install mdk3 Installing mdk3 (v6-1) to root... Downloading http://cloud.wifipineapple.com/mk5/packages/mdk3_v6-1_ar71xx.ipk. wget: server returned error: HTTP/1.1 404 Not Found Collected errors: * opkg_download: Failed to download http://cloud.wifipineapple.com/mk5/packages/mdk3_v6-1_ar71xx.ipk, wget returned 1. * opkg_install_pkg: Failed to download mdk3. Perhaps you need to run 'opkg update'? * opkg_install_cmd: Cannot install package mdk3. i cant install these packages after a opkg update, also other pacls that get evil portal working any suggestions? im a noob hope this is right place to post this
  11. thanks, i am writing my own stuff now .. my first one is a simple firefox keys.db and user password file saver.... is it possible to save to the sdcasrd inside the ducky??
  12. SOrry im a noob .. not sure where to post a question.. my output files arnt saving to target, usb or emailing and i think its coz im runnin the ducktoolkit gernerated scripts on win 10 .. i noticed target:windows 7 so just tryn to find win 10 ones , or shall i get coding my own? Cheers Coroner
×
×
  • Create New...